- Remove tango host controller driver (Arnd Bergmann)

* remotes/lorenzo/pci/tango:
  PCI: Remove tango host controller driver

# Conflicts:
#	drivers/pci/controller/Makefile

- Make 'ep-gpios' DT property optional (Chen-Yu Tsai)

- Add FriendlyARM NanoPi M4B to rockchip DT binding (Chen-Yu Tsai)

* pci/rockchip:
  dt-bindings: arm: rockchip: Add FriendlyARM NanoPi M4B
  PCI: rockchip: Make 'ep-gpios' DT property optional

- Always allocate rcar MSI addresses in 32-bit space so legacy devices
  without 64-bit MSI support can use MSI (Marek Vasut)

* remotes/lorenzo/pci/rcar:
  PCI: rcar: Always allocate MSI addresses in 32bit space

- Add support for SM8250 PCIe SF TBU clock (Dmitry Baryshkov)

- Use PHY_REFCLK_USE_PAD only for qcom ipq8064 (Ansuel Smith)

* pci/qcom:
  PCI: qcom: Use PHY_REFCLK_USE_PAD only for ipq8064
  PCI: qcom: Add support for ddrss_sf_tbu clock
  dt-bindings: PCI: qcom: Document ddrss_sf_tbu clock for sm8250

- Account for 64-bit BARs in pci_epc_get_first_free_bar() (Kishon Vijay
  Abraham I)

- Add pci_epc_get_next_free_bar() helper (Kishon Vijay Abraham I)

- Return error codes on failure of endpoint BAR interfaces (Kishon Vijay
  Abraham I)

- Remove unused pci_epf_match_device() (Kishon Vijay Abraham I)

- Add support for secondary endpoint controller to prepare for NTB endpoint
  functionality (Kishon Vijay Abraham I)

- Add configfs support for secondary endpoint controller (Kishon Vijay
  Abraham I)

- Add MSI address mapping ops for NTB doorbell support (Kishon Vijay
  Abraham I)

- Add ops for endpoint function-specific attributes (Kishon Vijay Abraham
  I)

- Allow configfs subdirectory for endpoint function configuration (Kishon
  Vijay Abraham I)

- Implement cadence MSI address mapping ops (Kishon Vijay Abraham I)

- Configure cadence LM_EP_FUNC_CFG based on epc->function_num_map (Kishon
  Vijay Abraham I)

- Add endpoint-side driver to provide NTB functionality (Kishon Vijay
  Abraham I)

- Add host-side driver for generic EPF NTB functionality (Kishon Vijay
  Abraham I)

- Document NTB endpoint functionality (Kishon Vijay Abraham I)

* pci/ntb:
  Documentation: PCI: Add PCI endpoint NTB function user guide
  Documentation: PCI: Add configfs binding documentation for pci-ntb endpoint function
  NTB: Add support for EPF PCI Non-Transparent Bridge
  PCI: Add TI J721E device to PCI IDs
  PCI: endpoint: Add EP function driver to provide NTB functionality
  PCI: cadence: Configure LM_EP_FUNC_CFG based on epc->function_num_map
  PCI: cadence: Implement ->msi_map_irq() ops
  PCI: endpoint: Allow user to create sub-directory of 'EPF Device' directory
  PCI: endpoint: Add pci_epf_ops to expose function-specific attrs
  PCI: endpoint: Add pci_epc_ops to map MSI IRQ
  PCI: endpoint: Add support in configfs to associate two EPCs with EPF
  PCI: endpoint: Add support to associate secondary EPC with EPF
  PCI: endpoint: Remove unused pci_epf_match_device()
  PCI: endpoint: Make *_free_bar() to return error codes on failure
  PCI: endpoint: Add helper API to get the 'next' unreserved BAR
  PCI: endpoint: Make *_get_first_free_bar() take into account 64 bit BAR
  Documentation: PCI: Add specification for the PCI NTB function device

- Call platform_set_drvdata() earlier so drivers can do window setup in
  init functions instead of custom probe (Daire McNamara)

- Add DT binding and host mode driver for Microchip PolarFire PCIe
  controller (Daire McNamara)

* pci/microchip:
  MAINTAINERS: Add Daire McNamara as Microchip PCIe driver maintainer
  PCI: microchip: Add Microchip PolarFire PCIe controller driver
  dt-bindings: PCI: microchip: Add Microchip PolarFire host binding
  PCI: Call platform_set_drvdata earlier in devm_pci_alloc_host_bridge

- Fix of_node_put() reference leak (Krzysztof Wilczyński)

* remotes/lorenzo/pci/mediatek:
  PCI: mediatek: Add missing of_node_put() to fix reference leak

- Add Layerscape LX2160A rev2 endpoint mode support (Hou Zhiqiang)

- Convert layerscape to builtin_platform_driver() (Michael Walle)

* pci/layerscape:
  PCI: layerscape: Convert to builtin_platform_driver()
  PCI: layerscape: Add LX2160A rev2 EP mode support
  dt-bindings: PCI: layerscape: Add LX2160A rev2 compatible strings

- Always set DesignWare "TLP Digest" bit so generic code can enable ECRC
  via the AER Capability (Vidya Sagar)

- Drop support for config space in DT 'ranges' (Rob Herring)

- Increase width of outbound iATU size to u64 (Shradha Todi)

- Add upper limit address for outbound iATU (Shradha Todi)

- Allow dwc-based drivers that don't override any default ops (Jisheng
  Zhang)

- Drop unnecessary dw_pcie_ops from the al driver (Jisheng Zhang)

* pci/dwc:
  PCI: al: Remove useless dw_pcie_ops
  PCI: dwc: Don't assume the ops in dw_pcie always exist
  PCI: dwc: Add upper limit address for outbound iATU
  PCI: dwc: Change size to u64 for EP outbound iATU
  PCI: dwc: Drop support for config space in 'ranges'
  PCI: dwc: Work around ECRC configuration issue

- Retrain Link to work around Gen2 training defect (Nadeem Athani)

* remotes/lorenzo/pci/cadence:
  PCI: cadence: Retrain Link to work around Gen2 training defect

- Add support for BCM4908 with external PERST# signal controller (Rafał
  Miłecki)

* remotes/lorenzo/pci/brcmstb:
  PCI: brcmstb: support BCM4908 with external PERST# signal controller
  dt-bindings: PCI: brcmstb: add BCM4908 binding

- Align checking of syscall user config accessor return codes (Heiner
  Kallweit)

- Fix "ordering" comment typos (Bjorn Helgaas)

- Fix 'ARM/TEXAS INSTRUMENT KEYSTONE CLOCKSOURCE' capitalization in
  MAINTAINERS (Bjorn Helgaas)

- Add Silicom Denmark vendor ID (Martin Hundebøll)

- Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy (Junhao He)

- Remove WARN_ON(in_interrupt()) (Sebastian Andrzej Siewior)

* pci/misc:
  PCI: Remove WARN_ON(in_interrupt())
  PCI: Apply CONFIG_PCI_DEBUG to entire drivers/pci hierarchy
  PCI: Add Silicom Denmark vendor ID
  MAINTAINERS: Fix 'ARM/TEXAS INSTRUMENT KEYSTONE CLOCKSOURCE' capitalization
  Fix "ordering" comment typos
  PCI: Align checking of syscall user config accessors

- Fix merge botch in cdns_pcie_host_map_dma_ranges() (Krzysztof Wilczyński)

* pci/host-probe-refactor:
  PCI: cadence: Fix DMA range mapping early return error

- Decline requests to resize BARs if platform requires us to preserve
  resource assignments (Ard Biesheuvel)

* pci/resource:
  PCI: Decline to resize resources if boot config must be preserved

- Remove bandwidth notification for now to avoid reporting spam (Bjorn
  Helgaas)

* pci/link:
  PCI/LINK: Remove bandwidth notification

- Remove unused acpiphp_callback typedef (Chen Lin)

* pci/hotplug:
  PCI: acpiphp: Remove unused acpiphp_callback typedef

- Clear AER status of the reporting device (Keith Busch)

- Clear AER status from Root Port when resetting Downstream Port (Keith
  Busch)

- Retain status from error notification (Keith Busch)

- Log the type of Port that was reset for error handling (Keith Busch)

- Report reset for frozen channel (Keith Busch)

* pci/error:
  PCI/portdrv: Report reset for frozen channel
  PCI/AER: Specify the type of Port that was reset
  PCI/ERR: Retain status from error notification
  PCI/AER: Clear AER status from Root Port when resetting Downstream Port
  PCI/ERR: Clear status of the reporting device

- Unexport acpi_pci_osc_control_set() (Bjorn Helgaas)

- Remove unnecessary osc_lock mutex (Bjorn Helgaas)

- Clarify _OSC failure message (Bjorn Helgaas)

- Fix pci-bridge-emul array overruns and improve safety (Russell King)

- Fix pci_register_io_range() memory leak (Geert Uytterhoeven)

* pci/enumeration:
  PCI: Fix pci_register_io_range() memory leak
  PCI: pci-bridge-emul: Fix array overruns, improve safety
  PCI/ACPI: Clarify message about _OSC failure
  PCI/ACPI: Remove unnecessary osc_lock
  PCI/ACPI: Make acpi_pci_osc_control_set() static

The use of PHY_REFCLK_USE_PAD introduced a regression for apq8064 devices.
It was tested that while apq doesn't require the padding, ipq SoC must use
it or the kernel hangs on boot.

Link: https://lore.kernel.org/r/20201019165555.8269-1-ansuelsmth@gmail.com
Fixes: de3c4bf6 ("PCI: qcom: Add support for tx term offset for rev 2.1.0")
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org	# v4.19+

On SM8250 additional clock is required for PCIe devices to access NOC.
Update PCIe controller driver to control this clock.

Link: https://lore.kernel.org/r/20210117013114.441973-3-dmitry.baryshkov@linaro.org
Fixes: e1dd639e ("PCI: qcom: Add SM8250 SoC support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>

On SM8250 additional clock is required for PCIe devices to access NOC.
Document this requirement in devicetree bindings.

Link: https://lore.kernel.org/r/20210117013114.441973-2-dmitry.baryshkov@linaro.org
Fixes: 45816824 ("dt-bindings: pci: qcom: Document PCIe bindings for SM8250 SoC")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

We have removed the assumption that dw_pcie_ops always exists in the dwc
core driver, so we can remove the useless dw_pcie_ops now.

Link: https://lore.kernel.org/r/20210128144324.2fa8577c@xhacker.debianSigned-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jonathan Chocron <jonnyc@amazon.com>

Some dwc-based device drivers, especially host-only drivers, may work well
with the default read_dbi/write_dbi/link_up implementations in
pcie-designware.c, so remove the assumption that every driver implements
them to simplify those drivers.

Link: https://lore.kernel.org/r/20210128144258.10329aa4@xhacker.debianSigned-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The size parameter is unsigned long type which can accept size > 4GB. In
that case, the upper limit address must be programmed. Add support to
program the upper limit address and set INCREASE_REGION_SIZE in case size >
4GB.

Link: https://lore.kernel.org/r/1612250918-19610-1-git-send-email-shradha.t@samsung.comSigned-off-by: Shradha Todi <shradha.t@samsung.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>

Since outbound iATU permits size to be greater than 4GB for which the
support is also available, allow EP function to send u64 size instead of
truncating to u32.

Link: https://lore.kernel.org/r/1609929900-19082-1-git-send-email-shradha.t@samsung.comSigned-off-by: Shradha Todi <shradha.t@samsung.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com>

Since commit a0fd361d ("PCI: dwc: Move "dbi", "dbi2", and
"addr_space" resource setup into common code"), the code
setting dbi_base when the config space is defined in 'ranges' property
instead of 'reg' is dead code as dbi_base is never NULL.

Rather than fix this, let's just drop the code. Using ranges has been
deprecated since 2014. The only platforms using this were exynos5440,
i.MX6 and Spear13xx. Exynos5440 is dead and has been removed. i.MX6 and
Spear13xx had PCIe support added just before this was deprecated and
were fixed within a kernel release or 2.

Link: https://lore.kernel.org/r/20201215194149.86831-1-robh@kernel.orgReported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

fw_devlink will defer the probe until all suppliers are ready. We can't
use builtin_platform_driver_probe() because it doesn't retry after probe
deferral. Convert it to builtin_platform_driver().

Link: https://lore.kernel.org/r/20210120105246.23218-1-michael@walle.ccSigned-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

The LX2160A rev2 uses the same PCIe IP as LS2088A, but LX2160A rev2 PCIe
controller is integrated with different stride between PFs' register
address.

Link: https://lore.kernel.org/r/20201026051448.1913-2-Zhiqiang.Hou@nxp.comSigned-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Add PCIe Endpoint mode compatible string "fsl,lx2160ar2-pcie-ep"

Link: https://lore.kernel.org/r/20201026051448.1913-1-Zhiqiang.Hou@nxp.comSigned-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>

DesignWare core has a TLP digest (TD) override bit in one of the control
registers of ATU. This bit also needs to be programmed for proper ECRC
functionality. This is currently identified as an issue with DesignWare
IP version 4.90a.

[bhelgaas: fix typos/grammar errors]
Link: https://lore.kernel.org/r/20201230165723.673-1-vidyas@nvidia.comSigned-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>

The PCI error recovery always resets the link for a frozen state, so the
port driver should return that a reset is required for its result. This
will get the .slot_reset() callback invoked, which is necessary to
restore the port's config space. Without this, the driver had been
relying on downstream drivers to return this status.

Link: https://lore.kernel.org/r/20210104230300.1277180-6-kbusch@kernel.orgTested-by: Hedi Berriche <hedi.berriche@hpe.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Hedi Berriche <hedi.berriche@hpe.com>

The AER driver may be called upon to reset either a Downstream or a Root
Port. Check which type it is to properly identify it when logging that
the reset occurred.

Link: https://lore.kernel.org/r/20210104230300.1277180-5-kbusch@kernel.orgTested-by: Hedi Berriche <hedi.berriche@hpe.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Hedi Berriche <hedi.berriche@hpe.com>

Overwriting the frozen detected status with the result of the link reset
loses the NEED_RESET result that drivers are depending on for error
handling to report the .slot_reset() callback. Retain this status so
that subsequent error handling has the correct flow.

Link: https://lore.kernel.org/r/20210104230300.1277180-4-kbusch@kernel.orgReported-by: Hinko Kocevar <hinko.kocevar@ess.eu>
Tested-by: Hedi Berriche <hedi.berriche@hpe.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Sean V Kelley <sean.v.kelley@intel.com>
Acked-by: Hedi Berriche <hedi.berriche@hpe.com>

The pci_dev parameter given to aer_root_reset() may be a Downstream Port
rather than the Root Port. Get the Root Port from the provided device in
order to clear the root's AER status.

Link: https://lore.kernel.org/r/20210104230300.1277180-3-kbusch@kernel.orgTested-by: Hedi Berriche <hedi.berriche@hpe.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Sean V Kelley <sean.v.kelley@intel.com>
Acked-by: Hedi Berriche <hedi.berriche@hpe.com>

Error handling operates on the first Downstream Port above the detected
error, but the error may have been reported by a downstream device.
Clear the AER status of the device that reported the error rather than
the first Downstream Port.

Link: https://lore.kernel.org/r/20210104230300.1277180-2-kbusch@kernel.orgTested-by: Hedi Berriche <hedi.berriche@hpe.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Sean V Kelley <sean.v.kelley@intel.com>
Acked-by: Hedi Berriche <hedi.berriche@hpe.com>

The NanoPi M4B is a minor revision of the original M4.

The differences against the original Nanopi M4 that are common with the
other M4V2 revision include:

  - microphone header removed
  - power button added
  - recovery button added

Additional changes specific to the M4B:

  - USB 3.0 hub removed; board now has 2x USB 3.0 type-A ports and 2x
    USB 2.0 ports
  - ADB toggle switch added; this changes the top USB 3.0 host port to
    a peripheral port
  - Type-C port no longer supports data or PD
  - WiFi/Bluetooth combo chip switched to AP6256, which supports BT 5.0
    but only 1T1R (down from 2T2R) for WiFi

Add a compatible string for the new board revision.

Link: https://lore.kernel.org/r/20210121162321.4538-3-wens@kernel.orgSigned-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>

The Rockchip PCIe controller DT binding clearly states that 'ep-gpios' is
an optional property. And indeed there are boards that don't require it.

Make the driver follow the binding by using devm_gpiod_get_optional()
instead of devm_gpiod_get().

[bhelgaas: tidy whitespace]
Link: https://lore.kernel.org/r/20210121162321.4538-2-wens@kernel.org
Fixes: e77f847d ("PCI: rockchip: Add Rockchip PCIe controller support")
Fixes: 956cd99b ("PCI: rockchip: Separate common code from RC driver")
Fixes: 964bac94 ("PCI: rockchip: Split out rockchip_pcie_parse_dt() to parse DT")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Add documentation to help users use pci-epf-ntb function driver and
existing host side NTB infrastructure for NTB functionality.

[bhelgaas: fix a few typos]
Link: https://lore.kernel.org/r/20210201195809.7342-18-kishon@ti.comSigned-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>

Add binding documentation for pci-ntb endpoint function that helps in
adding and configuring pci-ntb endpoint function.

Link: https://lore.kernel.org/r/20210201195809.7342-17-kishon@ti.comSigned-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Add support for EPF PCI Non-Transparent Bridge (NTB) devices.  This driver
is platform independent and may be used by any platform that has multiple
PCI endpoint instances configured using the pci-epf-ntb driver.  The driver
connnects to the standard NTB subsystem interface. The EPF NTB device has a
configurable number of memory windows (max 4), a configurable number of
doorbells (max 32), and a configurable number of scratch-pad registers.

Link: https://lore.kernel.org/r/20210201195809.7342-16-kishon@ti.comSigned-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>