- 16 Aug, 2019 2 commits
-
-
Denis Efremov authored
Update MAINTAINERS record to reflect the filename change. The file was moved in commit 25e992a4 ("r8169: rename r8169.c to r8169_main.c") Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: nic_swsd@realtek.com Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Denis Efremov authored
Update MAINTAINERS to reflect that sysfs-bus-mdio was removed in commit a6cd0d2d ("Documentation: net-sysfs: Remove duplicate PHY device documentation") and sysfs-class-net-phydev was added in commit 86f22d04 ("net: sysfs: Document PHY device sysfs attributes"). Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Denis Efremov <efremov@linux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 15 Aug, 2019 11 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== rxrpc: Fix local endpoint handling Here's a pair of patches that fix two issues in the handling of local endpoints (rxrpc_local structs): (1) Use list_replace_init() rather than list_replace() if we're going to unconditionally delete the replaced item later, lest the list get corrupted. (2) Don't access the rxrpc_local object after passing our ref to the workqueue, not even to illuminate tracepoints, as the work function may cause the object to be freed. We have to cache the information beforehand. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net This patchset contains Netfilter fixes for net: 1) Extend selftest to cover flowtable with ipsec, from Florian Westphal. 2) Fix interaction of ipsec with flowtable, also from Florian. 3) User-after-free with bound set to rule that fails to load. 4) Adjust state and timeout for flows that expire. 5) Timeout update race with flows in teardown state. 6) Ensure conntrack id hash calculation use invariants as input, from Dirk Morris. 7) Do not push flows into flowtable for TCP fin/rst packets. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
packet_sendmsg() checks tx_ring.pg_vec to decide if it must call tpacket_snd(). Problem is that the check is lockless, meaning another thread can issue a concurrent setsockopt(PACKET_TX_RING ) to flip tx_ring.pg_vec back to NULL. Given that tpacket_snd() grabs pg_vec_lock mutex, we can perform the check again to solve the race. syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 11429 Comm: syz-executor394 Not tainted 5.3.0-rc4+ #101 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:packet_lookup_frame+0x8d/0x270 net/packet/af_packet.c:474 Code: c1 ee 03 f7 73 0c 80 3c 0e 00 0f 85 cb 01 00 00 48 8b 0b 89 c0 4c 8d 24 c1 48 b8 00 00 00 00 00 fc ff df 4c 89 e1 48 c1 e9 03 <80> 3c 01 00 0f 85 94 01 00 00 48 8d 7b 10 4d 8b 3c 24 48 b8 00 00 RSP: 0018:ffff88809f82f7b8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff8880a45c7030 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffff110148b8e06 RDI: ffff8880a45c703c RBP: ffff88809f82f7e8 R08: ffff888087aea200 R09: fffffbfff134ae50 R10: fffffbfff134ae4f R11: ffffffff89a5727f R12: 0000000000000000 R13: 0000000000000001 R14: ffff8880a45c6ac0 R15: 0000000000000000 FS: 00007fa04716f700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa04716edb8 CR3: 0000000091eb4000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: packet_current_frame net/packet/af_packet.c:487 [inline] tpacket_snd net/packet/af_packet.c:2667 [inline] packet_sendmsg+0x590/0x6250 net/packet/af_packet.c:2975 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 69e3c75f ("net: TX_RING and packet mmap") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wenwen Wang authored
In myri10ge_probe(), myri10ge_alloc_slices() is invoked to allocate slices related structures. Later on, myri10ge_request_irq() is used to get an irq. However, if this process fails, the allocated slices related structures are not deallocated, leading to memory leaks. To fix this issue, revise the target label of the goto statement to 'abort_with_slices'. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John Fastabend authored
The ctx->sk_write_space pointer is only set when TLS tx mode is enabled. When running without TX mode its a null pointer but we still set the sk sk_write_space pointer on close(). Fix the close path to only overwrite sk->sk_write_space when the current pointer is to the tls_write_space function indicating the tls module should clean it up properly as well. Reported-by: Hillf Danton <hdanton@sina.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: Andrey Konovalov <andreyknvl@google.com> Fixes: 57c722e9 ("net/tls: swap sk_write_space on close") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wenwen Wang authored
If oct->fn_list.enable_io_queues() fails, no cleanup is executed, leading to memory/resource leaks. To fix this issue, invoke octeon_delete_instr_queue() before returning from the function. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-08-15 This series introduces two fixes to mlx5 driver. 1) Eran fixes a compatibility issue with ethtool flash. 2) Maxim fixes a race in XSK wakeup flow. Please pull and let me know if there is any problem. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eran Ben Elisha authored
Cited patch deleted ethtool flash device support, as ethtool core can fallback into devlink flash callback. However, this is supported only if there is a devlink port registered over the corresponding netdevice. As mlx5e do not have devlink port support over native netdevice, it broke the ability to flash device via ethtool. This patch re-add the ethtool callback to avoid user functionality breakage when trying to flash device via ethtool. Fixes: 9c8bca26 ("mlx5: Move firmware flash implementation to devlink") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Maxim Mikityanskiy authored
Add a missing spinlock around XSKICOSQ usage at the activation stage, because there is a race between a configuration change and the application calling sendto(). Fixes: db05815b ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
-
Anders Roxell authored
When running tcp_fastopen_backup_key.sh the following issue was seen in a busybox environment. ./tcp_fastopen_backup_key.sh: line 33: [: -ne: unary operator expected Shellcheck showed the following issue. $ shellcheck tools/testing/selftests/net/tcp_fastopen_backup_key.sh In tools/testing/selftests/net/tcp_fastopen_backup_key.sh line 33: if [ $val -ne 0 ]; then ^-- SC2086: Double quote to prevent globbing and word splitting. Rework to do a string comparison instead. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wenwen Wang authored
In blocked_fl_write(), 't' is not deallocated if bitmap_parse_user() fails, leading to a memory leak bug. To fix this issue, free t before returning the error. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 14 Aug, 2019 10 commits
-
-
David Howells authored
rxrpc_queue_local() attempts to queue the local endpoint it is given and then, if successful, prints a trace line. The trace line includes the current usage count - but we're not allowed to look at the local endpoint at this point as we passed our ref on it to the workqueue. Fix this by reading the usage count before queuing the work item. Also fix the reading of local->debug_id for trace lines, which must be done with the same consideration as reading the usage count. Fixes: 09d2bf59 ("rxrpc: Add a tracepoint to track rxrpc_local refcounting") Reported-by: syzbot+78e71c5bab4f76a6a719@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com>
-
David Howells authored
When a local endpoint (struct rxrpc_local) ceases to be in use by any AF_RXRPC sockets, it starts the process of being destroyed, but this doesn't cause it to be removed from the namespace endpoint list immediately as tearing it down isn't trivial and can't be done in softirq context, so it gets deferred. If a new socket comes along that wants to bind to the same endpoint, a new rxrpc_local object will be allocated and rxrpc_lookup_local() will use list_replace() to substitute the new one for the old. Then, when the dying object gets to rxrpc_local_destroyer(), it is removed unconditionally from whatever list it is on by calling list_del_init(). However, list_replace() doesn't reset the pointers in the replaced list_head and so the list_del_init() will likely corrupt the local endpoints list. Fix this by using list_replace_init() instead. Fixes: 730c5fd4 ("rxrpc: Fix local endpoint refcounting") Reported-by: syzbot+193e29e9387ea5837f1d@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com>
-
Pablo Neira Ayuso authored
TCP rst and fin packets do not qualify to place a flow into the flowtable. Most likely there will be no more packets after connection closure. Without this patch, this flow entry expires and connection tracking picks up the entry in ESTABLISHED state using the fixup timeout, which makes this look inconsistent to the user for a connection that is actually already closed. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
zhengbin authored
If the stream outq is not empty, need to kfree nstr_list. Fixes: d570a59c ("sctp: only allow the out stream reset when the stream outq is empty") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
David Ahern authored
Eric reported a syzbot warning: BUG: KMSAN: uninit-value in nh_valid_get_del_req+0x6f1/0x8c0 net/ipv4/nexthop.c:1510 CPU: 0 PID: 11812 Comm: syz-executor444 Not tainted 5.3.0-rc3+ #17 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x162/0x2d0 mm/kmsan/kmsan_report.c:109 __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:294 nh_valid_get_del_req+0x6f1/0x8c0 net/ipv4/nexthop.c:1510 rtm_del_nexthop+0x1b1/0x610 net/ipv4/nexthop.c:1543 rtnetlink_rcv_msg+0x115a/0x1580 net/core/rtnetlink.c:5223 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5241 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf6c/0x1050 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x110f/0x1330 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg net/socket.c:657 [inline] ___sys_sendmsg+0x14ff/0x1590 net/socket.c:2311 __sys_sendmmsg+0x53a/0xae0 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg+0xbd/0xe0 net/socket.c:2439 __x64_sys_sendmmsg+0x56/0x70 net/socket.c:2439 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:297 entry_SYSCALL_64_after_hwframe+0x63/0xe7 The root cause is nlmsg_parse calling __nla_parse which means the header struct size is not checked. nlmsg_parse should be a wrapper around __nlmsg_parse with NL_VALIDATE_STRICT for the validate argument very much like nlmsg_parse_deprecated is for NL_VALIDATE_LIBERAL. Fixes: 3de64403 ("netlink: re-add parse/validate functions in strict mode") Reported-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Heiner Kallweit authored
After configuring and restarting aneg we immediately try to read the link status. On some systems the PHY may not yet have cleared the "aneg complete" and "link up" bits, resulting in a false link-up signal. See [0] for a report. Clause 22 and 45 both require the PHY to keep the AN_RESTART bit set until the PHY actually starts auto-negotiation. Let's consider this in the generic functions for reading link status. The commit marked as fixed is the first one where the patch applies cleanly. [0] https://marc.info/?t=156518400300003&r=1&w=2 Fixes: c1164bb1 ("net: phy: check PMAPMD link status only in genphy_c45_read_link") Tested-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Wenwen Wang authored
In mlx4_en_config_rss_steer(), 'rss_map->indir_qp' is allocated through kzalloc(). After that, mlx4_qp_alloc() is invoked to configure RSS indirection. However, if mlx4_qp_alloc() fails, the allocated 'rss_map->indir_qp' is not deallocated, leading to a memory leak bug. To fix the above issue, add the 'qp_alloc_err' label to free 'rss_map->indir_qp'. Fixes: 4931c6ef ("net/mlx4_en: Optimized single ring steering") Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Thomas Falcon authored
The ibm,mac-address-filters property defines the maximum number of addresses the hypervisor's multicast filter list can support. It is encoded as a big-endian integer in the OF device tree, but the virtual ethernet driver does not convert it for use by little-endian systems. As a result, the driver is not behaving as it should on affected systems when a large number of multicast addresses are assigned to the device. Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Julian Wiedmann authored
Callbacks for a cmd reply run outside the protection of card->lock, to allow for additional cmds to be issued & enqueued in parallel. When qeth_send_control_data() bails out for a cmd without having received a reply (eg. due to timeout), its callback may concurrently be processing a reply that just arrived. In this case, the callback potentially accesses a stale reply->reply_param area that eg. was on-stack and has already been released. To avoid this race, add some locking so that qeth_send_control_data() can (1) wait for a concurrently running callback, and (2) zap any pending callback that still wants to run. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
Xin Long authored
As the annotation says in sctp_do_8_2_transport_strike(): "If the transport error count is greater than the pf_retrans threshold, and less than pathmaxrtx ..." It should be transport->error_count checked with pathmaxrxt, instead of asoc->pf_retrans. Fixes: 5aa93bcf ("sctp: Implement quick failover draft from tsvwg") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
-
- 13 Aug, 2019 1 commit
-
-
Dirk Morris authored
Change ct id hash calculation to only use invariants. Currently the ct id hash calculation is based on some fields that can change in the lifetime on a conntrack entry in some corner cases. The current hash uses the whole tuple which contains an hlist pointer which will change when the conntrack is placed on the dying list resulting in a ct id change. This patch also removes the reply-side tuple and extension pointer from the hash calculation so that the ct id will will not change from initialization until confirmation. Fixes: 3c791076 ("netfilter: ctnetlink: don't use conntrack/expect object addresses as id") Signed-off-by: Dirk Morris <dmorris@metaloft.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 12 Aug, 2019 8 commits
-
-
André Draszik authored
This driver does a funny dance disabling and re-enabling RX and/or TX delays. In any of the RGMII-ID modes, it first disables the delays, just to re-enable them again right away. This looks like a needless exercise. Just enable the respective delays when in any of the relevant 'id' modes, and disable them otherwise. Also, remove comments which don't add anything that can't be seen by looking at the code. Signed-off-by: André Draszik <git@andred.net> CC: Andrew Lunn <andrew@lunn.ch> CC: Florian Fainelli <f.fainelli@gmail.com> CC: Heiner Kallweit <hkallweit1@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nathan Chancellor authored
clang warns: drivers/net/ethernet/toshiba/tc35815.c:1507:30: warning: use of logical '&&' with constant operand [-Wconstant-logical-operand] if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ^ ~~~~~~~~~~~~ drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: use '&' for a bitwise operation if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ^~ & drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: remove constant to silence this warning if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN) ~^~~~~~~~~~~~~~~ 1 warning generated. Explicitly check that NET_IP_ALIGN is not zero, which matches how this is checked in other parts of the tree. Because NET_IP_ALIGN is a build time constant, this check will be constant folded away during optimization. Fixes: 82a9928d ("tc35815: Enable StripCRC feature") Link: https://github.com/ClangBuiltLinux/linux/issues/608Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chris Packham authored
We set the field 'addr_trial_end' to 'jiffies', instead of the current value 0, at the moment the node address is initialized. This guarantees we don't inadvertently enter an address trial period when the node address is explicitly set by the user. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Chen-Yu Tsai authored
The dsa framework has optional .port_mdb_{prepare,add,del} callback fields for drivers to handle multicast database entries. When adding an entry, the framework goes through a prepare phase, then a commit phase. Drivers not providing these callbacks should be detected in the prepare phase. DSA core may still bypass the bridge layer and call the dsa_port_mdb_add function directly with no prepare phase or no switchdev trans object, and the framework ends up calling an undefined .port_mdb_add callback. This results in a NULL pointer dereference, as shown in the log below. The other functions seem to be properly guarded. Do the same for .port_mdb_add in dsa_switch_mdb_add_bitmap() as well. 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = (ptrval) [00000000] *pgd=00000000 Internal error: Oops: 80000005 [#1] SMP ARM Modules linked in: rtl8xxxu rtl8192cu rtl_usb rtl8192c_common rtlwifi mac80211 cfg80211 CPU: 1 PID: 134 Comm: kworker/1:2 Not tainted 5.3.0-rc1-00247-gd3519030752a #1 Hardware name: Allwinner sun7i (A20) Family Workqueue: events switchdev_deferred_process_work PC is at 0x0 LR is at dsa_switch_event+0x570/0x620 pc : [<00000000>] lr : [<c08533ec>] psr: 80070013 sp : ee871db8 ip : 00000000 fp : ee98d0a4 r10: 0000000c r9 : 00000008 r8 : ee89f710 r7 : ee98d040 r6 : ee98d088 r5 : c0f04c48 r4 : ee98d04c r3 : 00000000 r2 : ee89f710 r1 : 00000008 r0 : ee98d040 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 6deb406a DAC: 00000051 Process kworker/1:2 (pid: 134, stack limit = 0x(ptrval)) Stack: (0xee871db8 to 0xee872000) 1da0: ee871e14 103ace2d 1dc0: 00000000 ffffffff 00000000 ee871e14 00000005 00000000 c08524a0 00000000 1de0: ffffe000 c014bdfc c0f04c48 ee871e98 c0f04c48 ee9e5000 c0851120 c014bef0 1e00: 00000000 b643aea2 ee9b4068 c08509a8 ee2bf940 ee89f710 ee871ecb 00000000 1e20: 00000008 103ace2d 00000000 c087e248 ee29c868 103ace2d 00000001 ffffffff 1e40: 00000000 ee871e98 00000006 00000000 c0fb2a50 c087e2d0 ffffffff c08523c4 1e60: ffffffff c014bdfc 00000006 c0fad2d0 ee871e98 ee89f710 00000000 c014c500 1e80: 00000000 ee89f3c0 c0f04c48 00000000 ee9e5000 c087dfb4 ee9e5000 00000000 1ea0: ee89f710 ee871ecb 00000001 103ace2d 00000000 c0f04c48 00000000 c087e0a8 1ec0: 00000000 efd9a3e0 0089f3c0 103ace2d ee89f700 ee89f710 ee9e5000 00000122 1ee0: 00000100 c087e130 ee89f700 c0fad2c8 c1003ef0 c087de4c 2e928000 c0fad2ec 1f00: c0fad2ec ee839580 ef7a62c0 ef7a9400 00000000 c087def8 c0fad2ec c01447dc 1f20: ef315640 ef7a62c0 00000008 ee839580 ee839594 ef7a62c0 00000008 c0f03d00 1f40: ef7a62d8 ef7a62c0 ffffe000 c0145b84 ffffe000 c0fb2420 c0bfaa8c 00000000 1f60: ffffe000 ee84b600 ee84b5c0 00000000 ee870000 ee839580 c0145b40 ef0e5ea4 1f80: ee84b61c c014a6f8 00000001 ee84b5c0 c014a5b0 00000000 00000000 00000000 1fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c08533ec>] (dsa_switch_event) from [<c014bdfc>] (notifier_call_chain+0x48/0x84) [<c014bdfc>] (notifier_call_chain) from [<c014bef0>] (raw_notifier_call_chain+0x18/0x20) [<c014bef0>] (raw_notifier_call_chain) from [<c08509a8>] (dsa_port_mdb_add+0x48/0x74) [<c08509a8>] (dsa_port_mdb_add) from [<c087e248>] (__switchdev_handle_port_obj_add+0x54/0xd4) [<c087e248>] (__switchdev_handle_port_obj_add) from [<c087e2d0>] (switchdev_handle_port_obj_add+0x8/0x14) [<c087e2d0>] (switchdev_handle_port_obj_add) from [<c08523c4>] (dsa_slave_switchdev_blocking_event+0x94/0xa4) [<c08523c4>] (dsa_slave_switchdev_blocking_event) from [<c014bdfc>] (notifier_call_chain+0x48/0x84) [<c014bdfc>] (notifier_call_chain) from [<c014c500>] (blocking_notifier_call_chain+0x50/0x68) [<c014c500>] (blocking_notifier_call_chain) from [<c087dfb4>] (switchdev_port_obj_notify+0x44/0xa8) [<c087dfb4>] (switchdev_port_obj_notify) from [<c087e0a8>] (switchdev_port_obj_add_now+0x90/0x104) [<c087e0a8>] (switchdev_port_obj_add_now) from [<c087e130>] (switchdev_port_obj_add_deferred+0x14/0x5c) [<c087e130>] (switchdev_port_obj_add_deferred) from [<c087de4c>] (switchdev_deferred_process+0x64/0x104) [<c087de4c>] (switchdev_deferred_process) from [<c087def8>] (switchdev_deferred_process_work+0xc/0x14) [<c087def8>] (switchdev_deferred_process_work) from [<c01447dc>] (process_one_work+0x218/0x50c) [<c01447dc>] (process_one_work) from [<c0145b84>] (worker_thread+0x44/0x5bc) [<c0145b84>] (worker_thread) from [<c014a6f8>] (kthread+0x148/0x150) [<c014a6f8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xee871fb0 to 0xee871ff8) 1fa0: 00000000 00000000 00000000 00000000 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: bad PC value ---[ end trace 1292c61abd17b130 ]--- [<c08533ec>] (dsa_switch_event) from [<c014bdfc>] (notifier_call_chain+0x48/0x84) corresponds to $ arm-linux-gnueabihf-addr2line -C -i -e vmlinux c08533ec linux/net/dsa/switch.c:156 linux/net/dsa/switch.c:178 linux/net/dsa/switch.c:328 Fixes: e6db98db ("net: dsa: add switch mdb bitmap functions") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Petr Machata authored
To identify timestamps for matching with their packets, Spectrum-1 uses a five-tuple of (port, direction, domain number, message type, sequence ID). If there are several clients from the same domain behind a single port sending Delay_Req's, the only thing differentiating these packets, as far as Spectrum-1 is concerned, is the sequence ID. Should sequence IDs between individual clients be similar, conflicts may arise. That is not a problem to hardware, which will simply deliver timestamps on a first comes, first served basis. However the driver uses a simple hash table to store the unmatched pieces. When a new conflicting piece arrives, it pushes out the previously stored one, which if it is a packet, is delivered without timestamp. Later on as the corresponding timestamps arrive, the first one is mismatched to the second packet, and the second one is never matched and eventually is GCd. To correct this issue, instead of using a simple rhashtable, use rhltable to keep the unmatched entries. Previously, a found unmatched entry would always be removed from the hash table. That is not the case anymore--an incompatible entry is left in the hash table. Therefore removal from the hash table cannot be used to confirm the validity of the looked-up pointer, instead the lookup would simply need to be redone. Therefore move it inside the critical section. This simplifies a lot of the code. Fixes: 87486427 ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Reported-by: Alex Veber <alexve@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jonathan Neuschäfer authored
Adjust the function names in two doc comments to match the corresponding functions. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Howells authored
Fix rxrpc_unuse_local() to handle a NULL local pointer as it can be called on an unbound socket on which rx->local is not yet set. The following reproduced (includes omitted): int main(void) { socket(AF_RXRPC, SOCK_DGRAM, AF_INET); return 0; } causes the following oops to occur: BUG: kernel NULL pointer dereference, address: 0000000000000010 ... RIP: 0010:rxrpc_unuse_local+0x8/0x1b ... Call Trace: rxrpc_release+0x2b5/0x338 __sock_release+0x37/0xa1 sock_close+0x14/0x17 __fput+0x115/0x1e9 task_work_run+0x72/0x98 do_exit+0x51b/0xa7a ? __context_tracking_exit+0x4e/0x10e do_group_exit+0xab/0xab __x64_sys_exit_group+0x14/0x17 do_syscall_64+0x89/0x1d4 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: syzbot+20dee719a2e090427b5f@syzkaller.appspotmail.com Fixes: 730c5fd4 ("rxrpc: Fix local endpoint refcounting") Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Prior to the commit in the fixes tag, the resource controller in netdevsim tracked fib entries and rules per network namespace. Restore that behavior. Fixes: 5fc49422 ("netdevsim: create devlink instance per netdevsim instance") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Aug, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2019-08-11 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) x64 JIT code generation fix for backward-jumps to 1st insn, from Alexei. 2) Fix buggy multi-closing of BTF file descriptor in libbpf, from Andrii. 3) Fix libbpf_num_possible_cpus() to make it thread safe, from Takshak. 4) Fix bpftool to dump an error if pinning fails, from Jakub. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 10 Aug, 2019 1 commit
-
-
Jakub Kicinski authored
Now that we swap the original proto and clear the ULP pointer on close we have to make sure no callback will try to access the freed state. sk_write_space is not part of sk_prot, remember to swap it. Reported-by: syzbot+dcdc9deefaec44785f32@syzkaller.appspotmail.com Fixes: 95fa1454 ("bpf: sockmap/tls, close can race with map free") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Aug, 2019 6 commits
-
-
Dexuan Cui authored
This fixes a warning of "suspicious rcu_dereference_check() usage" when nload runs. Fixes: 776e726b ("netvsc: fix RCU warning in get_stats") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-08-08 This series introduces some fixes to mlx5 driver. Highlights: 1) From Tariq, Critical mlx5 kTLS fixes to better align with hw specs. 2) From Aya, Fixes to mlx5 tx devlink health reporter. 3) From Maxim, aRFs parsing to use flow dissector to avoid relying on invalid skb fields. Please pull and let me know if there is any problem. For -stable v4.3 ('net/mlx5e: Only support tx/rx pause setting for port owner') For -stable v4.9 ('net/mlx5e: Use flow keys dissector to parse packets for ARFS') For -stable v5.1 ('net/mlx5e: Fix false negative indication on tx reporter CQE recovery') ('net/mlx5e: Remove redundant check in CQE recovery flow of tx reporter') ('net/mlx5e: ethtool, Avoid setting speed to 56GBASE when autoneg off') Note: when merged with net-next this minor conflict will pop up: ++<<<<<<< (net-next) + if (is_eswitch_flow) { + flow->esw_attr->match_level = match_level; + flow->esw_attr->tunnel_match_level = tunnel_match_level; ++======= + if (flow->flags & MLX5E_TC_FLOW_ESWITCH) { + flow->esw_attr->inner_match_level = inner_match_level; + flow->esw_attr->outer_match_level = outer_match_level; ++>>>>>>> (net) To resolve, use hunks from net (2nd) and replace: if (flow->flags & MLX5E_TC_FLOW_ESWITCH) with if (is_eswitch_flow) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Taehee Yoo authored
ixgbe_service_task() calls unregister_netdev() under rtnl_lock(). But unregister_netdev() internally calls rtnl_lock(). So deadlock would occur. Fixes: 59dd45d5 ("ixgbe: firmware recovery mode") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Daniel Borkmann says: ==================== Fix collisions in socket cookie generation This change makes the socket cookie generator as a global counter instead of per netns in order to fix cookie collisions for BPF use cases we ran into. See main patch #1 for more details. Given the change is small/trivial and fixes an issue we're seeing my preference would be net tree (though it cleanly applies to net-next as well). Went for net tree instead of bpf tree here given the main change is in net/core/sock_diag.c, but either way would be fine with me. v1 -> v2: - Fix up commit description in patch #1, thanks Eric! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Pull in updates in BPF helper function description. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Generating and retrieving socket cookies are a useful feature that is exposed to BPF for various program types through bpf_get_socket_cookie() helper. The fact that the cookie counter is per netns is quite a limitation for BPF in practice in particular for programs in host namespace that use socket cookies as part of a map lookup key since they will be causing socket cookie collisions e.g. when attached to BPF cgroup hooks or cls_bpf on tc egress in host namespace handling container traffic from veth or ipvlan devices with peer in different netns. Change the counter to be global instead. Socket cookie consumers must assume the value as opqaue in any case. Not every socket must have a cookie generated and knowledge of the counter value itself does not provide much value either way hence conversion to global is fine. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Willem de Bruijn <willemb@google.com> Cc: Martynas Pumputis <m@lambda.lt> Signed-off-by: David S. Miller <davem@davemloft.net>
-