- 13 Apr, 2021 12 commits
-
-
Marc Kleine-Budde authored
This patch replaces the memcpy() + le32_to_cpu() by le32_to_cpup(). Link: https://lore.kernel.org/r/20210406111622.1874957-9-mkl@pengutronix.deAcked-by:
Stephane Grosjean <s.grosjean@peak-system.com> Tested-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
The caller of pcan_usb_get_serial() already prints an error message, so remove this one and return immediately. Link: https://lore.kernel.org/r/20210406111622.1874957-8-mkl@pengutronix.deAcked-by:
-
Marc Kleine-Budde authored
The callback struct peak_usb_adapter::dev_get_device_id, which is implemented by the functions pcan_usb_{,pro}_get_device_id() is only ever called with a valid device_id pointer. This patch removes the unneeded check if the device_id pointer is valid. Link: https://lore.kernel.org/r/20210406111622.1874957-7-mkl@pengutronix.deAcked-by: -
Marc Kleine-Budde authored
There's no need to iterate over all supported adapters to find the struct peak_usb_adapter that describes the currently probed devices's capabilities. The driver core gives us the information for free, if we assign it to the struct usb_device_id::driver_info. This patch assigns the usb_device_id::driver_info and converts peak_usb_probe() to make use of it. This reduces the driver size by 100 bytes on ARCH=arm. | add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-124 (-124) | Function old new delta | peak_usb_adapters_list 24 - -24 | peak_usb_probe 236 136 -100 | Total: Before=25263, After=25139, chg -0.49% Link: https://lore.kernel.org/r/20210406111622.1874957-6-mkl@pengutronix.deAcked-by:
-
Marc Kleine-Budde authored
The variable struct peak_usb_adapter::ts_period is only ever written to. This patch removes it from the driver. Link: https://lore.kernel.org/r/20210406111622.1874957-5-mkl@pengutronix.deAcked-by:
-
Marc Kleine-Budde authored
This patch removes the unused variables struct peak_usb_device::echo_skb and struct peak_usb_device::bus_load from the driver. Link: https://lore.kernel.org/r/20210406111622.1874957-4-mkl@pengutronix.deAcked-by:
-
Marc Kleine-Budde authored
This patch replaces the double space indention after the u8 with a single space in pcan_usb_pro.h. Link: https://lore.kernel.org/r/20210406111622.1874957-3-mkl@pengutronix.deAcked-by:
-
Marc Kleine-Budde authored
This patch cleans several checkpatch warnings in the peak_usb driver. Link: https://lore.kernel.org/r/20210406111622.1874957-2-mkl@pengutronix.deAcked-by:
-
Vincent Mailhol authored
This patch add support for the ES582.1 and ES584.1 interfaces from ETAS GmbH (https://www.etas.com/en/products/es58x.php). Link: https://lore.kernel.org/r/20210410095948.233305-4-mailhol.vincent@wanadoo.frCo-developed-by:
Arunachalam Santhanam <arunachalam.santhanam@in.bosch.com> Signed-off-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by:
-
Vincent Mailhol authored
This patch adds support for the ES581.4 interface from ETAS GmbH (https://www.etas.com/en/products/es58x.php). Link: https://lore.kernel.org/r/20210410095948.233305-3-mailhol.vincent@wanadoo.frCo-developed-by:
-
Vincent Mailhol authored
This patch adds the core support for various USB CAN interfaces from ETAS GmbH (https://www.etas.com/en/products/es58x.php). The next patches add the glue code drivers for the individual interfaces. Link: https://lore.kernel.org/r/20210410095948.233305-2-mailhol.vincent@wanadoo.frCo-developed-by:
-
Yoshihiro Shimoda authored
Document SoC specific bindings for R-Car M3-W+ (r8a77961) SoC. Also as R8A7796 is now called R8A77960 so that update those references. Link: https://lore.kernel.org/r/20210409000020.2317696-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
- 12 Apr, 2021 23 commits
-
-
Adam Ford authored
For devices that use a programmable clock for the AVB reference clock, the driver may need to enable them. Add code to find the optional clock and enable it when available. Signed-off-by:
Adam Ford <aford173@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Adam Ford authored
The AVB driver assumes there is an external crystal, but it could be clocked by other means. In order to enable a programmable clock, it needs to be added to the clocks list and enabled in the driver. Since there currently only one clock, there is no clock-names list either. Update bindings to add the additional optional clock, and explicitly name both of them. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by:
-
David S. Miller authored
Yangbo Lu says: ==================== enetc: support PTP Sync packet one-step timestamping This patch-set is to add support for PTP Sync packet one-step timestamping. Since ENETC single-step register has to be configured dynamically per packet for correctionField offeset and UDP checksum update, current one-step timestamping packet has to be sent only when the last one completes transmitting on hardware. So, on the TX, this patch handles one-step timestamping packet as below: - Trasmit packet immediately if no other one in transfer, or queue to skb queue if there is already one in transfer. The test_and_set_bit_lock() is used here to lock and check state. - Start a work when complete transfer on hardware, to release the bit lock and to send one skb in skb queue if has. Changes for v2: - Rebased. - Fixed issues from patchwork checks. - netif_tx_lock for one-step timestamping packet sending. Changes for v3: - Used system workqueue. - Set bit lock when transmitted one-step packet, and scheduled work when completed. The worker cleared the bit lock, and transmitted one skb in skb queue if has, instead of a loop. ==================== Signed-off-by: -
Yangbo Lu authored
This patch is to add support for PTP Sync packet one-step timestamping. Since ENETC single-step register has to be configured dynamically per packet for correctionField offeset and UDP checksum update, current one-step timestamping packet has to be sent only when the last one completes transmitting on hardware. So, on the TX, this patch handles one-step timestamping packet as below: - Trasmit packet immediately if no other one in transfer, or queue to skb queue if there is already one in transfer. The test_and_set_bit_lock() is used here to lock and check state. - Start a work when complete transfer on hardware, to release the bit lock and to send one skb in skb queue if has. And the configuration for one-step timestamping on ENETC before transmitting is, - Set one-step timestamping flag in extension BD. - Write 30 bits current timestamp in tstamp field of extension BD. - Update PTP Sync packet originTimestamp field with current timestamp. - Configure single-step register for correctionField offeset and UDP checksum update. Signed-off-by:
Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
Yangbo Lu authored
Mark TX timestamp type per skb on skb->cb[0], instead of global variable for all skbs. This is a preparation for one step timestamp support. For one-step timestamping enablement, there will be both one-step and two-step PTP messages to transfer. And a skb queue is needed for one-step PTP messages making sure start to send current message only after the last one completed on hardware. (ENETC single-step register has to be dynamically configured per message.) So, marking TX timestamp type per skb is required. Signed-off-by:
-
David S. Miller authored
Lijun Pan says: ==================== ibmvnic: improve error printing Patch 1 prints reset reason as a string. Patch 2 prints adapter state as a string. ==================== Signed-off-by: -
Lijun Pan authored
The adapter state can be added or deleted over different versions of the source code. Print a string instead of a number. Signed-off-by:
Lijun Pan <lijunp213@gmail.com> Signed-off-by:
-
Lijun Pan authored
The reset reason can be added or deleted over different versions of the source code. Print a string instead of a number. Signed-off-by:
-
Lijun Pan authored
Commit e704f043 ("ibmvnic: Remove debugfs support") did not clean up everything. Remove the remaining code. Signed-off-by:
-
David S. Miller authored
Jonathon Reinhart says: ==================== Ensuring net sysctl isolation This patchset is the result of an audit of /proc/sys/net to prove that it is safe to be mouted read-write in a container when a net namespace is in use. See [1]. The first commit adds code to detect sysctls which are not netns-safe, and can "leak" changes to other net namespaces. My manual audit found, and the above feature confirmed, that there are two nf_conntrack sysctls which are in fact not netns-safe. I considered sending the latter to netfilter-devel, but I think it's better to have both together on net-next: Adding only the former causes undesirable warnings in the kernel log. [1]: https://github.com/opencontainers/runc/issues/2826 ==================== Signed-off-by:
-
Jonathon Reinhart authored
These sysctls point to global variables: - NF_SYSCTL_CT_MAX (&nf_conntrack_max) - NF_SYSCTL_CT_EXPECT_MAX (&nf_ct_expect_max) - NF_SYSCTL_CT_BUCKETS (&nf_conntrack_htable_size_user) Because their data pointers are not updated to point to per-netns structures, they must be marked read-only in a non-init_net ns. Otherwise, changes in any net namespace are reflected in (leaked into) all other net namespaces. This problem has existed since the introduction of net namespaces. The current logic marks them read-only only if the net namespace is owned by an unprivileged user (other than init_user_ns). Commit d0febd81 ("netfilter: conntrack: re-visit sysctls in unprivileged namespaces") "exposes all sysctls even if the namespace is unpriviliged." Since we need to mark them readonly in any case, we can forego the unprivileged user check altogether. Fixes: d0febd81 ("netfilter: conntrack: re-visit sysctls in unprivileged namespaces") Signed-off-by:
Jonathon Reinhart <Jonathon.Reinhart@gmail.com> Signed-off-by:
-
Jonathon Reinhart authored
This adds an ensure_safe_net_sysctl() check during register_net_sysctl() to validate that sysctl table entries for a non-init_net netns are sufficiently isolated. To be netns-safe, an entry must adhere to at least (and usually exactly) one of these rules: 1. It is marked read-only inside the netns. 2. Its data pointer does not point to kernel/module global data. An entry which fails both of these checks is indicative of a bug, whereby a child netns can affect global net sysctl values. If such an entry is found, this code will issue a warning to the kernel log, and force the entry to be read-only to prevent a leak. To test, simply create a new netns: $ sudo ip netns add dummy As it sits now, this patch will WARN for two sysctls which will be addressed in a subsequent patch: - /proc/sys/net/netfilter/nf_conntrack_max - /proc/sys/net/netfilter/nf_conntrack_expect_max Signed-off-by: -
wengjianfeng authored
In many places,first assign a value to a variable and then return the variable. which is redundant, we should directly return the value. in pn533_rf_field funciton,return rc also in the if statement, so we use return 0 to replace the last return rc. Signed-off-by:
wengjianfeng <wengjianfeng@yulong.com> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Error recovery fixes. This series adds some fixes and enhancements to the error recovery logic. The health register logic is improved and we also add missing code to free and re-create VF representors in the firmware after error recovery. ==================== Signed-off-by: -
Sriharsha Basavapatna authored
During firmware recovery, VF-Rep configuration in the firmware is lost. Fix it by freeing and (re)allocating VF-Reps in FW at relevant points during the error recovery process. Signed-off-by:
Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
Add a new helper function __bnxt_free_one_vf_rep() to free one VF rep. We also reintialize the VF rep fields to proper initial values so that the function can be used without freeing the VF rep data structure. This will be used in subsequent patches to free and recreate VF reps after error recovery. Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Reviewed-by:
-
Sriharsha Basavapatna authored
Add a new function bnxt_alloc_vf_rep() to allocate a VF representor. This function will be needed in subsequent patches to recreate the VF reps after error recovery. Signed-off-by:
-
Vasundhara Volam authored
After probe is successful, interface may not be bought up in all the cases and health register mapping could be invalid if firmware undergoes reset. Fix it by invalidating the health register at the end of probe. It will be remapped during ifup. Fixes: 43a440c4 ("bnxt_en: Improve the status_reliable flag in bp->fw_health.") Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
-
Michael Chan authored
The retry loop in bnxt_try_recover_fw() should not abort when the health register value is 0. It is a valid value that indicates the firmware is booting up. Fixes: 861aae78 ("bnxt_en: Enhance retry of the first message to the firmware.") Reviewed-by:
-
Andrea Mayer authored
There is a comment spelling mistake "interfarence" -> "interference" in function parse_nla_action(). Fix it. Signed-off-by:
Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by:
-
Colin Ian King authored
The reset_prepare and reset_done calls have a null pointer check on ae_dev however ae_dev is being dereferenced via the call to ns3_is_phys_func with the ae->pdev argument. Fix this by performing a null pointer check on ae_dev and hence short-circuiting the dereference to ae_dev on the call to ns3_is_phys_func. Addresses-Coverity: ("Dereference before null check") Fixes: 715c58e9 ("net: hns3: add suspend and resume pm_ops") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
The shifting of the u8 integers rq->caching by 26 bits to the left will be promoted to a 32 bit signed int and then sign-extended to a u64. In the event that rq->caching is greater than 0x1f then all then all the upper 32 bits of the u64 end up as also being set because of the int sign-extension. Fix this by casting the u8 values to a u64 before the 26 bit left shift. Addresses-Coverity: ("Unintended sign extension") Fixes: 4863dea3 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by: -
Colin Ian King authored
The shifting of the u8 integers f->fs.nat_lip[] by 24 bits to the left will be promoted to a 32 bit signed int and then sign-extended to a u64. In the event that the top bit of the u8 is set then all then all the upper 32 bits of the u64 end up as also being set because of the sign-extension. Fix this by casting the u8 values to a u64 before the 24 bit left shift. Addresses-Coverity: ("Unintended sign extension") Fixes: 12b276fb ("cxgb4: add support to create hash filters") Signed-off-by:
-
- 11 Apr, 2021 5 commits
-
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: support two more platforms This series adds IPA support for two more Qualcomm SoCs. The first patch updates the DT binding to add compatible strings. The second temporarily disables checksum offload support for IPA version 4.5 and above. Changes are required to the RMNet driver to support the "inline" checksum offload used for IPA v4.5+, and once those are present this capability will be enabled for IPA. The third and fourth patches add configuration data for IPA versions 4.5 (used for the SDX55 SoC) and 4.11 (used for the SD7280 SoC). ==================== Signed-off-by: -
Alex Elder authored
Add support for the SC7280 SoC, which includes IPA version 4.11. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Add support for the SDX55 SoC, which includes IPA version 4.5. Starting with IPA v4.5, a few of the memory regions have a different number of "canary" values; update comments in the where the region identifers are defined to accurately reflect that. I'll note three differences in SDX55 versus the other two existing platforms (SDM845 and SC7180): - SDX55 uses a 32-bit Linux kernel - SDX55 has four interconnects rather than three - SDX55 uses IPA v4.5, which uses inline checksum offload Signed-off-by:
-
Alex Elder authored
Checksum offload for IPA v4.5+ is implemented differently, using "inline" offload (which uses a common header format for both upload and download offload). The IPA hardware must be programmed to enable MAP checksum offload, but the RMNet driver is responsible for interpreting checksum metadata supplied with messages. Currently, the RMNet driver does not support inline checksum offload. This support is imminent, but until it is available, do not allow newer versions of IPA to specify checksum offload for endpoints. Signed-off-by:
-
Alex Elder authored
Add existing supported platform "qcom,sc7180-ipa" to the set of IPA compatible strings. Also add newly-supported "qcom,sdx55-ipa", "qcom,sc7280-ipa". Signed-off-by:
-
