- 05 Mar, 2021 10 commits
-
-
Xu Wang authored
fix semicolon.cocci warning: tools/testing/selftests/net/ipsec.c:1788:2-3: Unneeded semicolon Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Junlin Yang authored
ibmvnic_remove locks multiple spinlocks while disabling interrupts: spin_lock_irqsave(&adapter->state_lock, flags); spin_lock_irqsave(&adapter->rwi_lock, flags); As reported by coccinelle, the second _irqsave() overwrites the value saved in 'flags' by the first _irqsave(), therefore when the second _irqrestore() comes,the value in 'flags' is not valid,the value saved by the first _irqsave() has been lost. This likely leads to IRQs remaining disabled. So remove the second _irqsave(): spin_lock_irqsave(&adapter->state_lock, flags); spin_lock(&adapter->rwi_lock); Generated by: ./scripts/coccinelle/locks/flags.cocci ./drivers/net/ethernet/ibm/ibmvnic.c:5413:1-18: ERROR: nested lock+irqsave that reuses flags from line 5404. Fixes: 4a41c421 ("ibmvnic: serialize access to work queue on remove") Signed-off-by:
Junlin Yang <yangjunlin@yulong.com> Signed-off-by:
-
Sergey Nazarov authored
We need to use put_unaligned when writing 32-bit DOI value in cipso_v4_gentag_hdr to avoid unaligned memory access. v2: unneeded type cast removed as Ondrej Mosnacek suggested. Signed-off-by:
Sergey Nazarov <s-nazarov@yandex.ru> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Wong Vee Khee authored
Issue seen when enumerating multiple Intel mGbE interfaces in EHL. [ 6.898141] intel-eth-pci 0000:00:1d.2: enabling device (0000 -> 0002) [ 6.900971] intel-eth-pci 0000:00:1d.2: Fail to register stmmac-clk [ 6.906434] intel-eth-pci 0000:00:1d.2: User ID: 0x51, Synopsys ID: 0x52 We fix it by making the clock name to be unique following the format of stmmac-pci_name(pci_dev) so that we can differentiate the clock for these Intel mGbE interfaces in EHL platform as follow: /sys/kernel/debug/clk/stmmac-0000:00:1d.1 /sys/kernel/debug/clk/stmmac-0000:00:1d.2 /sys/kernel/debug/clk/stmmac-0000:00:1e.4 Fixes: 58da0cfa ("net: stmmac: create dwmac-intel.c to contain all Intel platform") Signed-off-by:
Wong Vee Khee <vee.khee.wong@intel.com> Signed-off-by:
Voon Weifeng <weifeng.voon@intel.com> Co-developed-by:
Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by:
-
Ong Boon Leong authored
For Intel mGbE controller, MAC VLAN filter delete operation will time-out if serdes power-down sequence happened first during driver remove() with below message. [82294.764958] intel-eth-pci 0000:00:1e.4 eth2: stmmac_dvr_remove: removing driver [82294.778677] intel-eth-pci 0000:00:1e.4 eth2: Timeout accessing MAC_VLAN_Tag_Filter [82294.779997] intel-eth-pci 0000:00:1e.4 eth2: failed to kill vid 0081/0 [82294.947053] intel-eth-pci 0000:00:1d.2 eth1: stmmac_dvr_remove: removing driver [82295.002091] intel-eth-pci 0000:00:1d.1 eth0: stmmac_dvr_remove: removing driver Therefore, we delay the serdes power-down to be after unregister_netdev() which triggers the VLAN filter delete. Fixes: b9663b7c ("net: stmmac: Enable SERDES power up/down sequence") Signed-off-by:
-
Jia-Ju Bai authored
When iavf_process_config() fails, no error return code of iavf_init_get_resources() is assigned. To fix this bug, err is assigned with the return value of iavf_process_config(), and then err is checked. Reported-by:
TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Jia-Ju Bai authored
When bdx_read_mac() fails, no error return code of bdx_probe() is assigned. To fix this bug, err is assigned with -EFAULT as error return code. Reported-by:
-
Kevin(Yudong) Yang authored
This patch fixes a bug that the moderation config will not be applied when calling mlx4_en_reset_config. For example, when turning on rx timestamping, mlx4_en_reset_config() will be called, causing the NIC to forget previous moderation config. This fix is in phase with a previous fix: commit 79c54b6b ("net/mlx4_en: Fix TX moderation info loss after set_ringparam is called") Tested: Before this patch, on a host with NIC using mlx4, run netserver and stream TCP to the host at full utilization. $ sar -I SUM 1 INTR intr/s 14:03:56 sum 48758.00 After rx hwtstamp is enabled: $ sar -I SUM 1 14:10:38 sum 317771.00 We see the moderation is not working properly and issued 7x more interrupts. After the patch, and turned on rx hwtstamp, the rate of interrupts is as expected: $ sar -I SUM 1 14:52:11 sum 49332.00 Fixes: 79c54b6b ("net/mlx4_en: Fix TX moderation info loss after set_ringparam is called") Signed-off-by:
Kevin(Yudong) Yang <yyd@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Neal Cardwell <ncardwell@google.com> CC: Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2021-03-04 The following pull-request contains BPF updates for your *net* tree. We've added 7 non-merge commits during the last 4 day(s) which contain a total of 9 files changed, 128 insertions(+), 40 deletions(-). The main changes are: 1) Fix 32-bit cmpxchg, from Brendan. 2) Fix atomic+fetch logic, from Ilya. 3) Fix usage of bpf_csum_diff in selftests, from Yauheni. ====================
-
Brendan Jackman authored
As pointed out by Ilya and explained in the new comment, there's a discrepancy between x86 and BPF CMPXCHG semantics: BPF always loads the value from memory into r0, while x86 only does so when r0 and the value in memory are different. The same issue affects s390. At first this might sound like pure semantics, but it makes a real difference when the comparison is 32-bit, since the load will zero-extend r0/rax. The fix is to explicitly zero-extend rax after doing such a CMPXCHG. Since this problem affects multiple archs, this is done in the verifier by patching in a BPF_ZEXT_REG instruction after every 32-bit cmpxchg. Any archs that don't need such manual zero-extension can do a look-ahead with insn_is_zext to skip the unnecessary mov. Note this still goes on top of Ilya's patch: https://lore.kernel.org/bpf/20210301154019.129110-1-iii@linux.ibm.com/T/#u Differences v5->v6[1]: - Moved is_cmpxchg_insn and ensured it can be safely re-used. Also renamed it and removed 'inline' to match the style of the is_*_function helpers. - Fixed up comments in verifier test (thanks for the careful review, Martin!) Differences v4->v5[1]: - Moved the logic entirely into opt_subreg_zext_lo32_rnd_hi32, thanks to Martin for suggesting this. Differences v3->v4[1]: - Moved the optimization against pointless zext into the correct place: opt_subreg_zext_lo32_rnd_hi32 is called _after_ fixup_bpf_calls. Differences v2->v3[1]: - Moved patching into fixup_bpf_calls (patch incoming to rename this function) - Added extra commentary on bpf_jit_needs_zext - Added check to avoid adding a pointless zext(r0) if there's already one there. Difference v1->v2[1]: Now solved centrally in the verifier instead of specifically for the x86 JIT. Thanks to Ilya and Daniel for the suggestions! [1] v5: https://lore.kernel.org/bpf/CA+i-1C3ytZz6FjcPmUg5s4L51pMQDxWcZNvM86w4RHZ_o2khwg@mail.gmail.com/T/#t v4: https://lore.kernel.org/bpf/CA+i-1C3ytZz6FjcPmUg5s4L51pMQDxWcZNvM86w4RHZ_o2khwg@mail.gmail.com/T/#t v3: https://lore.kernel.org/bpf/08669818-c99d-0d30-e1db-53160c063611@iogearbox.net/T/#t v2: https://lore.kernel.org/bpf/08669818-c99d-0d30-e1db-53160c063611@iogearbox.net/T/#t v1: https://lore.kernel.org/bpf/d7ebaefb-bfd6-a441-3ff2-2fdfe699b1d2@iogearbox.net/T/#tReported-by:
Ilya Leoshkevich <iii@linux.ibm.com> Fixes: 5ffa2550 ("bpf: Add instructions for atomic_[cmp]xchg") Signed-off-by:
Brendan Jackman <jackmanb@google.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Alexei Starovoitov <ast@kernel.org>
-
- 04 Mar, 2021 30 commits
-
-
Paul Moore authored
The current CIPSO and CALIPSO refcounting scheme for the DOI definitions is a bit flawed in that we: 1. Don't correctly match gets/puts in netlbl_cipsov4_list(). 2. Decrement the refcount on each attempt to remove the DOI from the DOI list, only removing it from the list once the refcount drops to zero. This patch fixes these problems by adding the missing "puts" to netlbl_cipsov4_list() and introduces a more conventional, i.e. not-buggy, refcounting mechanism to the DOI definitions. Upon the addition of a DOI to the DOI list, it is initialized with a refcount of one, removing a DOI from the list removes it from the list and drops the refcount by one; "gets" and "puts" behave as expected with respect to refcounts, increasing and decreasing the DOI's refcount by one. Fixes: b1edeb10 ("netlabel: Replace protocol/NetLabel linking with refrerence counts") Fixes: d7cce015 ("netlabel: Add support for removing a CALIPSO DOI.") Reported-by: syzbot+9ec037722d2603a9f52e@syzkaller.appspotmail.com Signed-off-by:
-
Jiri Wiesner authored
The last change to ibmvnic_set_mac(), 8fc3672a, meant to prevent users from setting an invalid MAC address on an ibmvnic interface that has not been brought up yet. The change also prevented the requested MAC address from being stored by the adapter object for an ibmvnic interface when the state of the ibmvnic interface is VNIC_PROBED - that is after probing has finished but before the ibmvnic interface is brought up. The MAC address stored by the adapter object is used and sent to the hypervisor for checking when an ibmvnic interface is brought up. The ibmvnic driver ignoring the requested MAC address when in VNIC_PROBED state caused LACP bonds (bonds in 802.3ad mode) with more than one slave to malfunction. The bonding code must be able to change the MAC address of its slaves before they are brought up during enslaving. The inability of kernels with 8fc3672a to set the MAC addresses of bonding slaves is observable in the output of "ip address show". The MAC addresses of the slaves are the same as the MAC address of the bond on a working system whereas the slaves retain their original MAC addresses on a system with a malfunctioning LACP bond. Fixes: 8fc3672a ("ibmvnic: fix ibmvnic_set_mac") Signed-off-by:
Jiri Wiesner <jwiesner@suse.com> Signed-off-by:
-
Hillf Danton authored
Init the u64 stats in order to avoid the lockdep prints on the 32bit hardware like INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 0 PID: 4695 Comm: syz-executor.0 Not tainted 5.11.0-rc5-syzkaller #0 Hardware name: ARM-Versatile Express Backtrace: [<826fc5b8>] (dump_backtrace) from [<826fc82c>] (show_stack+0x18/0x1c arch/arm/kernel/traps.c:252) [<826fc814>] (show_stack) from [<8270d1f8>] (__dump_stack lib/dump_stack.c:79 [inline]) [<826fc814>] (show_stack) from [<8270d1f8>] (dump_stack+0xa8/0xc8 lib/dump_stack.c:120) [<8270d150>] (dump_stack) from [<802bf9c0>] (assign_lock_key kernel/locking/lockdep.c:935 [inline]) [<8270d150>] (dump_stack) from [<802bf9c0>] (register_lock_class+0xabc/0xb68 kernel/locking/lockdep.c:1247) [<802bef04>] (register_lock_class) from [<802baa2c>] (__lock_acquire+0x84/0x32d4 kernel/locking/lockdep.c:4711) [<802ba9a8>] (__lock_acquire) from [<802be840>] (lock_acquire.part.0+0xf0/0x554 kernel/locking/lockdep.c:5442) [<802be750>] (lock_acquire.part.0) from [<802bed10>] (lock_acquire+0x6c/0x74 kernel/locking/lockdep.c:5415) [<802beca4>] (lock_acquire) from [<81560548>] (seqcount_lockdep_reader_access include/linux/seqlock.h:103 [inline]) [<802beca4>] (lock_acquire) from [<81560548>] (__u64_stats_fetch_begin include/linux/u64_stats_sync.h:164 [inline]) [<802beca4>] (lock_acquire) from [<81560548>] (u64_stats_fetch_begin include/linux/u64_stats_sync.h:175 [inline]) [<802beca4>] (lock_acquire) from [<81560548>] (nsim_get_stats64+0xdc/0xf0 drivers/net/netdevsim/netdev.c:70) [<8156046c>] (nsim_get_stats64) from [<81e2efa0>] (dev_get_stats+0x44/0xd0 net/core/dev.c:10405) [<81e2ef5c>] (dev_get_stats) from [<81e53204>] (rtnl_fill_stats+0x38/0x120 net/core/rtnetlink.c:1211) [<81e531cc>] (rtnl_fill_stats) from [<81e59d58>] (rtnl_fill_ifinfo+0x6d4/0x148c net/core/rtnetlink.c:1783) [<81e59684>] (rtnl_fill_ifinfo) from [<81e5ceb4>] (rtmsg_ifinfo_build_skb+0x9c/0x108 net/core/rtnetlink.c:3798) [<81e5ce18>] (rtmsg_ifinfo_build_skb) from [<81e5d0ac>] (rtmsg_ifinfo_event net/core/rtnetlink.c:3830 [inline]) [<81e5ce18>] (rtmsg_ifinfo_build_skb) from [<81e5d0ac>] (rtmsg_ifinfo_event net/core/rtnetlink.c:3821 [inline]) [<81e5ce18>] (rtmsg_ifinfo_build_skb) from [<81e5d0ac>] (rtmsg_ifinfo+0x44/0x70 net/core/rtnetlink.c:3839) [<81e5d068>] (rtmsg_ifinfo) from [<81e45c2c>] (register_netdevice+0x664/0x68c net/core/dev.c:10103) [<81e455c8>] (register_netdevice) from [<815608bc>] (nsim_create+0xf8/0x124 drivers/net/netdevsim/netdev.c:317) [<815607c4>] (nsim_create) from [<81561184>] (__nsim_dev_port_add+0x108/0x188 drivers/net/netdevsim/dev.c:941) [<8156107c>] (__nsim_dev_port_add) from [<815620d8>] (nsim_dev_port_add_all drivers/net/netdevsim/dev.c:990 [inline]) [<8156107c>] (__nsim_dev_port_add) from [<815620d8>] (nsim_dev_probe+0x5cc/0x750 drivers/net/netdevsim/dev.c:1119) [<81561b0c>] (nsim_dev_probe) from [<815661dc>] (nsim_bus_probe+0x10/0x14 drivers/net/netdevsim/bus.c:287) [<815661cc>] (nsim_bus_probe) from [<811724c0>] (really_probe+0x100/0x50c drivers/base/dd.c:554) [<811723c0>] (really_probe) from [<811729c4>] (driver_probe_device+0xf8/0x1c8 drivers/base/dd.c:740) [<811728cc>] (driver_probe_device) from [<81172fe4>] (__device_attach_driver+0x8c/0xf0 drivers/base/dd.c:846) [<81172f58>] (__device_attach_driver) from [<8116fee0>] (bus_for_each_drv+0x88/0xd8 drivers/base/bus.c:431) [<8116fe58>] (bus_for_each_drv) from [<81172c6c>] (__device_attach+0xdc/0x1d0 drivers/base/dd.c:914) [<81172b90>] (__device_attach) from [<8117305c>] (device_initial_probe+0x14/0x18 drivers/base/dd.c:961) [<81173048>] (device_initial_probe) from [<81171358>] (bus_probe_device+0x90/0x98 drivers/base/bus.c:491) [<811712c8>] (bus_probe_device) from [<8116e77c>] (device_add+0x320/0x824 drivers/base/core.c:3109) [<8116e45c>] (device_add) from [<8116ec9c>] (device_register+0x1c/0x20 drivers/base/core.c:3182) [<8116ec80>] (device_register) from [<81566710>] (nsim_bus_dev_new drivers/net/netdevsim/bus.c:336 [inline]) [<8116ec80>] (device_register) from [<81566710>] (new_device_store+0x178/0x208 drivers/net/netdevsim/bus.c:215) [<81566598>] (new_device_store) from [<8116fcb4>] (bus_attr_store+0x2c/0x38 drivers/base/bus.c:122) [<8116fc88>] (bus_attr_store) from [<805b4b8c>] (sysfs_kf_write+0x48/0x54 fs/sysfs/file.c:139) [<805b4b44>] (sysfs_kf_write) from [<805b3c90>] (kernfs_fop_write_iter+0x128/0x1ec fs/kernfs/file.c:296) [<805b3b68>] (kernfs_fop_write_iter) from [<804d22fc>] (call_write_iter include/linux/fs.h:1901 [inline]) [<805b3b68>] (kernfs_fop_write_iter) from [<804d22fc>] (new_sync_write fs/read_write.c:518 [inline]) [<805b3b68>] (kernfs_fop_write_iter) from [<804d22fc>] (vfs_write+0x3dc/0x57c fs/read_write.c:605) [<804d1f20>] (vfs_write) from [<804d2604>] (ksys_write+0x68/0xec fs/read_write.c:658) [<804d259c>] (ksys_write) from [<804d2698>] (__do_sys_write fs/read_write.c:670 [inline]) [<804d259c>] (ksys_write) from [<804d2698>] (sys_write+0x10/0x14 fs/read_write.c:667) [<804d2688>] (sys_write) from [<80200060>] (ret_fast_syscall+0x0/0x2c arch/arm/mm/proc-v7.S:64) Fixes: 83c9e13a ("netdevsim: add software driver for testing offloads") Reported-by: syzbot+e74a6857f2d0efe3ad81@syzkaller.appspotmail.com Tested-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Fixes for v5.12 These patches from the MPTCP tree fix a few multipath TCP issues: Patches 1 and 5 clear some stale pointers when subflows close. Patches 2, 4, and 9 plug some memory leaks. Patch 3 fixes a memory accounting error identified by syzkaller. Patches 6 and 7 fix a race condition that slowed data transmission. Patch 8 adds missing wakeups when write buffer space is freed. ==================== Signed-off-by: -
Geliang Tang authored
When the port number is mismatched with the announced ones, use 'goto dispose_child' to free the resources instead of using 'goto out'. This patch also moves the port number checking code in subflow_syn_recv_sock before mptcp_finish_join, otherwise subflow_drop_ctx will fail in dispose_child. Fixes: 5bc56388 ("mptcp: add port number check for MP_JOIN") Reported-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
__mptcp_clean_una() can free write memory and should wake-up user-space processes when needed. When such function is invoked by the MPTCP receive path, the wakeup is not needed, as the TCP stack will later trigger subflow_write_space which will do the wakeup as needed. Other __mptcp_clean_una() call sites need an additional wakeup check Let's bundle the relevant code in a new helper and use it. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/165 Fixes: 6e628cd3 ("mptcp: use mptcp release_cb for delayed tasks") Fixes: 64b9cea7 ("mptcp: fix spurious retransmissions") Tested-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Paolo Abeni authored
If we receive a MPTCP_PUSH_PENDING even from a subflow when mptcp_release_cb() is serving the previous one, the latter will be delayed up to the next release_sock(msk). Address the issue implementing a test/serve loop for such event. Additionally rename the push helper to __mptcp_push_pending() to be more consistent with the existing code. Fixes: 6e628cd3 ("mptcp: use mptcp release_cb for delayed tasks") Signed-off-by:
-
Paolo Abeni authored
Will simplify the following patch, no functional change intended. Signed-off-by:
-
Florian Westphal authored
Just like with last_snd, we have to NULL 'first' on subflow close. ack_hint isn't strictly required (its never dereferenced), but better to clear this explicitly as well instead of making it an exception. msk->first is dereferenced unconditionally at accept time, but at that point the ssk is not on the conn_list yet -- this means worker can't see it when iterating the conn_list. Reported-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
Christoph Paasch reported following crash: dst_release underflow WARNING: CPU: 0 PID: 1319 at net/core/dst.c:175 dst_release+0xc1/0xd0 net/core/dst.c:175 CPU: 0 PID: 1319 Comm: syz-executor217 Not tainted 5.11.0-rc6af8e85128b4d0d24083c5cac646e891227052e0c #70 Call Trace: rt_cache_route+0x12e/0x140 net/ipv4/route.c:1503 rt_set_nexthop.constprop.0+0x1fc/0x590 net/ipv4/route.c:1612 __mkroute_output net/ipv4/route.c:2484 [inline] ... The worker leaves msk->subflow alone even when it happened to close the subflow ssk associated with it. Fixes: 866f26f2 ("mptcp: always graft subflow socket to parent") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/157Reported-by:
Christoph Paasch <cpaasch@apple.com> Suggested-by:
-
Paolo Abeni authored
In case of memory pressure the MPTCP xmit path keeps at most a single skb in the tx cache, eventually freeing additional ones. The associated counter for forward memory is not update accordingly, and that causes the following splat: WARNING: CPU: 0 PID: 12 at net/core/stream.c:208 sk_stream_kill_queues+0x3ca/0x530 net/core/stream.c:208 Modules linked in: CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.11.0-rc2 #59 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:sk_stream_kill_queues+0x3ca/0x530 net/core/stream.c:208 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e 63 01 00 00 8b ab 00 01 00 00 e9 60 ff ff ff e8 2f 24 d3 fe 0f 0b eb 97 e8 26 24 d3 fe <0f> 0b eb a0 e8 1d 24 d3 fe 0f 0b e9 a5 fe ff ff 4c 89 e7 e8 0e d0 RSP: 0018:ffffc900000c7bc8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88810030ac40 RSI: ffffffff8262ca4a RDI: 0000000000000003 RBP: 0000000000000d00 R08: 0000000000000000 R09: ffffffff85095aa7 R10: ffffffff8262c9ea R11: 0000000000000001 R12: ffff888108908100 R13: ffffffff85095aa0 R14: ffffc900000c7c48 R15: 1ffff92000018f85 FS: 0000000000000000(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa7444baef8 CR3: 0000000035ee9005 CR4: 0000000000170ef0 Call Trace: __mptcp_destroy_sock+0x4a7/0x6c0 net/mptcp/protocol.c:2547 mptcp_worker+0x7dd/0x1610 net/mptcp/protocol.c:2272 process_one_work+0x896/0x1170 kernel/workqueue.c:2275 worker_thread+0x605/0x1350 kernel/workqueue.c:2421 kthread+0x344/0x410 kernel/kthread.c:292 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:296 At close time, as reported by syzkaller/Christoph. This change address the issue properly updating the fwd allocated memory counter in the error path. Reported-by:
-
Florian Westphal authored
mptcp_add_pending_subflow() performs a sock_hold() on the subflow, then adds the subflow to the join list. Without a sock_put the subflow sk won't be freed in case connect() fails. unreferenced object 0xffff88810c03b100 (size 3000): [..] sk_prot_alloc.isra.0+0x2f/0x110 sk_alloc+0x5d/0xc20 inet6_create+0x2b7/0xd30 __sock_create+0x17f/0x410 mptcp_subflow_create_socket+0xff/0x9c0 __mptcp_subflow_connect+0x1da/0xaf0 mptcp_pm_nl_work+0x6e0/0x1120 mptcp_worker+0x508/0x9a0 Fixes: 5b950ff4 ("mptcp: link MPC subflow into msk only after accept") Signed-off-by: -
Florian Westphal authored
Send logic caches last active subflow in the msk, so it needs to be cleared when the cached subflow is closed. Fixes: d5f49190 ("mptcp: allow picking different xmit subflows") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/155Reported-by:
-
Maximilian Heyne authored
This is a follow up of commit ea327469 ("net: sched: avoid duplicates in qdisc dump") which has fixed the issue only for the qdisc dump. The duplicate printing also occurs when dumping the classes via tc class show dev eth0 Fixes: 59cc1f61 ("net: sched: convert qdisc linked list to hashtable") Signed-off-by:
Maximilian Heyne <mheyne@amazon.de> Signed-off-by:
-
Daniele Palmas authored
There's no reason for preventing the creation and removal of qmimux network interfaces when the underlying interface is up. This makes qmi_wwan mux implementation more similar to the rmnet one, simplifying userspace management of the same logical interfaces. Fixes: c6adf779 ("net: usb: qmi_wwan: add qmap mux protocol support") Reported-by:
Aleksander Morgado <aleksander@aleksander.es> Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Vladimir Oltean authored
In the blamed patch I managed to introduce a bug while moving code around: the same logic is applied to the ucast_egress_floods and bcast_egress_floods variables both on the "if" and the "else" branches. This is clearly an unintended change compared to how the code used to be prior to that bugfix, so restore it. Fixes: 7f7ccdea ("net: dsa: sja1105: fix leakage of flooded frames outside bridging domain") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Vladimir Oltean authored
When using MLO_AN_PHY or MLO_AN_FIXED, the MII_BMCR of the SGMII PCS is read before resetting the switch so it can be reprogrammed afterwards. This works for the speeds of 1Gbps and 100Mbps, but not for 10Mbps, because SPEED_10 is actually 0, so AND-ing anything with 0 is false, therefore that last branch is dead code. Do what others do (genphy_read_status_fixed, phy_mii_ioctl) and just remove the check for SPEED_10, let it fall into the default case. Fixes: ffe10e67 ("net: dsa: sja1105: Add support for the SGMII port") Signed-off-by:
-
Vladimir Oltean authored
An attempt is made to warn the user about the fact that VCAP IS1 cannot offload keys matching on destination IP (at least given the current half key format), but sadly that warning fails miserably in practice, due to the fact that it operates on an uninitialized "match" variable. We must first decode the keys from the flow rule. Fixes: 75944fda ("net: mscc: ocelot: offload ingress skbedit and vlan actions to VCAP IS1") Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== nexthop: Do not flush blackhole nexthops when loopback goes down Patch #1 prevents blackhole nexthops from being flushed when the loopback device goes down given that as far as user space is concerned, these nexthops do not have a nexthop device. Patch #2 adds a test case. There are no regressions in fib_nexthops.sh with this change: # ./fib_nexthops.sh ... Tests passed: 165 Tests failed: 0 ==================== Signed-off-by: -
Ido Schimmel authored
Test that blackhole nexthops are not flushed when the loopback device goes down. Output without previous patch: # ./fib_nexthops.sh -t basic Basic functional tests ---------------------- TEST: List with nothing defined [ OK ] TEST: Nexthop get on non-existent id [ OK ] TEST: Nexthop with no device or gateway [ OK ] TEST: Nexthop with down device [ OK ] TEST: Nexthop with device that is linkdown [ OK ] TEST: Nexthop with device only [ OK ] TEST: Nexthop with duplicate id [ OK ] TEST: Blackhole nexthop [ OK ] TEST: Blackhole nexthop with other attributes [ OK ] TEST: Blackhole nexthop with loopback device down [FAIL] TEST: Create group [ OK ] TEST: Create group with blackhole nexthop [FAIL] TEST: Create multipath group where 1 path is a blackhole [ OK ] TEST: Multipath group can not have a member replaced by blackhole [ OK ] TEST: Create group with non-existent nexthop [ OK ] TEST: Create group with same nexthop multiple times [ OK ] TEST: Replace nexthop with nexthop group [ OK ] TEST: Replace nexthop group with nexthop [ OK ] TEST: Nexthop group and device [ OK ] TEST: Test proto flush [ OK ] TEST: Nexthop group and blackhole [ OK ] Tests passed: 19 Tests failed: 2 Output with previous patch: # ./fib_nexthops.sh -t basic Basic functional tests ---------------------- TEST: List with nothing defined [ OK ] TEST: Nexthop get on non-existent id [ OK ] TEST: Nexthop with no device or gateway [ OK ] TEST: Nexthop with down device [ OK ] TEST: Nexthop with device that is linkdown [ OK ] TEST: Nexthop with device only [ OK ] TEST: Nexthop with duplicate id [ OK ] TEST: Blackhole nexthop [ OK ] TEST: Blackhole nexthop with other attributes [ OK ] TEST: Blackhole nexthop with loopback device down [ OK ] TEST: Create group [ OK ] TEST: Create group with blackhole nexthop [ OK ] TEST: Create multipath group where 1 path is a blackhole [ OK ] TEST: Multipath group can not have a member replaced by blackhole [ OK ] TEST: Create group with non-existent nexthop [ OK ] TEST: Create group with same nexthop multiple times [ OK ] TEST: Replace nexthop with nexthop group [ OK ] TEST: Replace nexthop group with nexthop [ OK ] TEST: Nexthop group and device [ OK ] TEST: Test proto flush [ OK ] TEST: Nexthop group and blackhole [ OK ] Tests passed: 21 Tests failed: 0 Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Ido Schimmel authored
As far as user space is concerned, blackhole nexthops do not have a nexthop device and therefore should not be affected by the administrative or carrier state of any netdev. However, when the loopback netdev goes down all the blackhole nexthops are flushed. This happens because internally the kernel associates blackhole nexthops with the loopback netdev. This behavior is both confusing to those not familiar with kernel internals and also diverges from the legacy API where blackhole IPv4 routes are not flushed when the loopback netdev goes down: # ip route add blackhole 198.51.100.0/24 # ip link set dev lo down # ip route show 198.51.100.0/24 blackhole 198.51.100.0/24 Blackhole IPv6 routes are flushed, but at least user space knows that they are associated with the loopback netdev: # ip -6 route show 2001:db8:1::/64 blackhole 2001:db8:1::/64 dev lo metric 1024 pref medium Fix this by only flushing blackhole nexthops when the loopback netdev is unregistered. Fixes: ab84be7e ("net: Initial nexthop code") Signed-off-by:
Donald Sharp <sharpd@nvidia.com> Reviewed-by:
-
Drew Fustini authored
Fix typo of 'overflow' for comment in sctp_tsnmap_check(). Reported-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by:
Drew Fustini <drew@beagleboard.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-03-03 This series contains updates to ixgbe and ixgbevf drivers. Bartosz Golaszewski does not error on -ENODEV from ixgbe_mii_bus_init() as this is valid for some devices with a shared bus for ixgbe. Antony Antony adds a check to fail for non transport mode SA with offload as this is not supported for ixgbe and ixgbevf. Dinghao Liu fixes a memory leak on failure to program a perfect filter for ixgbe. ==================== Signed-off-by: -
Dinghao Liu authored
When ixgbe_fdir_write_perfect_filter_82599() fails, input allocated by kzalloc() has not been freed, which leads to memleak. Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by:
Paul Menzel <pmenzel@molgen.mpg.de> Tested-by:
Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Antony Antony authored
Based on talks and indirect references ixgbe IPsec offlod do not support IPsec tunnel mode offload. It can only support IPsec transport mode offload. Now explicitly fail when creating non transport mode SA with offload to avoid false performance expectations. Fixes: 63a67fe2 ("ixgbe: add ipsec offload add and remove SA") Signed-off-by:
Antony Antony <antony@phenome.org> Acked-by:
Shannon Nelson <snelson@pensando.io> Tested-by:
-
Ilya Leoshkevich authored
insn_has_def32() returns false for 32-bit BPF_FETCH insns. This makes adjust_insn_aux_data() incorrectly set zext_dst, as can be seen in [1]. This happens because insn_no_def() does not know about the BPF_FETCH variants of BPF_STX. Fix in two steps. First, replace insn_no_def() with insn_def_regno(), which returns the register an insn defines. Normally insn_no_def() calls are followed by insn->dst_reg uses; replace those with the insn_def_regno() return value. Second, adjust the BPF_STX special case in is_reg64() to deal with queries made from opt_subreg_zext_lo32_rnd_hi32(), where the state information is no longer available. Add a comment, since the purpose of this special case is not clear at first glance. [1] https://lore.kernel.org/bpf/20210223150845.1857620-1-jackmanb@google.com/ Fixes: 5ffa2550 ("bpf: Add instructions for atomic_[cmp]xchg") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
-
Maciej Fijalkowski authored
xsk_lookup_bpf_maps, based on prog_fd, looks whether current prog has a reference to XSKMAP. BPF prog can include insns that work on various BPF maps and this is covered by iterating through map_ids. The bpf_map_info that is passed to bpf_obj_get_info_by_fd for filling needs to be cleared at each iteration, so that it doesn't contain any outdated fields and that is currently missing in the function of interest. To fix that, zero-init map_info via memset before each bpf_obj_get_info_by_fd call. Also, since the area of this code is touched, in general strcmp is considered harmful, so let's convert it to strncmp and provide the size of the array name for current map_info. While at it, do s/continue/break/ once we have found the xsks_map to terminate the search. Fixes: 5750902a ("libbpf: proper XSKMAP cleanup") Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20210303185636.18070-4-maciej.fijalkowski@intel.com
-
Maciej Fijalkowski authored
We mmap the umem region, but we never munmap it. Add the missing call at the end of the cleanup. Fixes: 3945b37a ("samples/bpf: use hugepages in xdpsock app") Signed-off-by:
-
Maciej Fijalkowski authored
xdp_umem_query() is dead for a long time, drop the declaration from include/linux/netdevice.h Fixes: c9b47cc1 ("xsk: fix bug when trying to use both copy and zero-copy on one queue id") Signed-off-by:
-
zhang kai authored
Signed-off-by:
zhang kai <zhangkaiheb@126.com> Signed-off-by:
-
