Pull backlight updates from Lee Jones:
 "New Functionality:
   - Add lots of Device Tree bindings / support
   - Turn off LED strings when display is blank
   - Switch I2C drivers from .probe_new() to .probe()
   - Remove superfluous NULL checks
   - Only obtain PWM information once and do it in .probe()

  Fix-ups:
   - Ensure locks are obtained and held when required"

* tag 'backlight-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: led_bl: Take led_access lock when required
  video: backlight: lp855x: Get PWM for PWM mode during probe
  dt-bindings: backlight: lp855x: Convert to YAML and modernize
  dt-bindings: backlight: pwm: Make power-supply not required
  backlight: pwm_bl: Remove unneeded checks for valid GPIOs
  backlight: Switch i2c drivers back to use .probe()
  backlight: lm3630a: Turn off both led strings when display is blank
  dt-bindings: leds: backlight: ktz8866: Add reg property and update example

Pull LED updates from Lee Jones:
 "New Drivers:
   - Add support for Intel Cherry Trail Whiskey Cove PMIC LEDs
   - Add support for Awinic AW20036/AW20054/AW20072 LEDs

  New Device Support:
   - Add support for PMI632 LPG to QCom LPG
   - Add support for PMI8998 to QCom Flash
   - Add support for MT6331, WLEDs and MT6332 to Mediatek MT6323 PMIC

  New Functionality:
   - Implement the LP55xx Charge Pump
   - Add support for suspend / resume to Intel Cherry Trail Whiskey Cove PMIC
   - Add support for breathing mode to Intel Cherry Trail Whiskey Cove PMIC
   - Enable per-pin resolution Pinctrl in LEDs GPIO

  Fix-ups:
   - Allow thread to sleep by switching from spinlock to mutex
   - Add lots of Device Tree bindings / support
   - Adapt relationships / dependencies driven by Kconfig
   - Switch I2C drivers from .probe_new() to .probe()
   - Remove superfluous / duplicate code
   - Replace strlcpy() with strscpy() for efficiency and overflow prevention
   - Staticify various functions
   - Trivial: Fixing coding style
   - Simplify / reduce code

  Bug Fixes:
   - Prevent NETDEV_LED_MODE_LINKUP from being cleared on rename
   - Repair race between led_set_brightness(LED_{OFF,FULL})
   - Fix Oops relating to sleeping in critical sections
   - Clear LED_INIT_DEFAULT_TRIGGER flag when clearing the current trigger
   - Do not leak resources in error handling paths
   - Fix unsigned comparison which can never be negative
   - Provide missing NULL terminating entries in tables
   - Fix misnaming issues"

* tag 'leds-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (53 commits)
  leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
  leds: sgm3140: Add richtek,rt5033-led compatible
  dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
  dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
  dt-bindings: leds: Drop unneeded quotes
  leds: Fix config reference for AW200xx driver
  leds: leds-mt6323: Add support for WLEDs and MT6332
  leds: leds-mt6323: Add support for MT6331 leds
  leds: leds-mt6323: Open code and drop MT6323_CAL_HW_DUTY macro
  leds: leds-mt6323: Drop MT6323_ prefix from macros and defines
  leds: leds-mt6323: Specify registers and specs in platform data
  dt-bindings: leds: leds-mt6323: Document mt6332 compatible
  dt-bindings: leds: leds-mt6323: Document mt6331 compatible
  leds: simatic-ipc-leds-gpio: Introduce more Kconfig switches
  leds: simatic-ipc-leds-gpio: Split up into multiple drivers
  leds: simatic-ipc-leds-gpio: Move two extra gpio pins into another table
  leds: simatic-ipc-leds-gpio: Add terminating entries to gpio tables
  leds: flash: leds-qcom-flash: Fix an unsigned comparison which can never be negative
  leds: cht-wcove: Remove unneeded semicolon
  leds: cht-wcove: Fix an unsigned comparison which can never be negative
  ...

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for TI TPS6594/TPS6593/LP8764 PMICs
   - Add support for Samsung RT5033 Battery Charger
   - Add support for Analog Devices MAX77540 and MAX77541 PMICs

  New Device Support:
   - Add support for SPI to Rockchip RK808 (and friends)
   - Add support for AXP192 PMIC to X-Powers AXP20X
   - Add support for AXP313a PMIC to X-Powers AXP20X
   - Add support for RK806 to Rockchip RK8XX

  Removed Device Support:
   - Removed MFD support for Richtek RT5033 Battery

  Fix-ups:
   - Remove superfluous code
   - Switch I2C drivers from .probe_new() to .probe()
   - Convert over to managed resources (devm_*(), etc)
   - Use dev_err_probe() for returning errors from .probe()
   - Add lots of Device Tree bindings / support
   - Improve cache efficiency by switching to Maple
   - Use own exported namespaces (NS)
   - Include missing and remove superfluous headers
   - Start using / convert to the new shutdown sys-off API
   - Trivial: variable / define renaming
   - Make use of of_property_read_reg() when requesting DT 'reg's

  Bug Fixes:
   - Fix chip revision readout due to incorrect data masking
   - Amend incorrect register and mask values used for charger state
   - Hide unused functionality at compile time
   - Fix resource leaks following error handling routines
   - Return correct error values and fix error handling in general
   - Repair incorrect device names - used for device matching
   - Remedy broken module auto-loading"

* tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (51 commits)
  dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
  iio: adc: max77541: Add ADI MAX77541 ADC Support
  regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
  dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
  mfd: Switch two more drivers back to use struct i2c_driver::probe
  dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties
  mfd: stmpe: Only disable the regulators if they are enabled
  mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes
  mfd: core: Use of_property_read_reg() to parse "reg"
  mfd: stmfx: Nullify stmfx->vdd in case of error
  mfd: stmfx: Fix error path in stmfx_chip_init
  mfd: intel-lpss: Add missing check for platform_get_resource
  mfd: stpmic1: Add PMIC poweroff via sys-off handler
  mfd: stpmic1: Fixup main control register and bits naming
  dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074
  mfd: tps65219: Add support for soft shutdown via sys-off API
  mfd: pm8008: Drop bogus i2c module alias
  mfd: pm8008: Fix module autoloading
  mfd: tps65219: Add GPIO cell instance
  ...

Pull mailbox updates from Jassi Brar:

 - tegra: support for Tegra264

 - broadcom: convert bcm2835 bindings from txt to yaml bcm2835

 - qcom: support for IPQ5018

 - ti: always zero TX data fields

* tag 'mailbox-v6.5' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: ti-msgmgr: Fill non-message tx data fields with 0x0
  mailbox: tegra: add support for Tegra264
  dt-bindings: mailbox: tegra: Document Tegra264 HSP
  dt-bindings: mailbox: convert bcm2835-mbox bindings to YAML
  dt-bindings: mailbox: qcom: Add IPQ5018 APCS compatible

Pull RTC updates from Alexandre Belloni:
 "The isl1208 dirver was reworked tobe able to work as part of an MFD.

  All the Loongson chips are now supported through a new driver, the old
  one is removed.

  Summary:

  Subsystem:
   - Switch i2c drivers back to use .probe()
   - Constify pointers to hwmon_channel_info

  New driver:
   - Loongson on chip RTC, replacing the Loongson 1 only driver

  Drivers:
   - isl1208: cleanup and support for RAA215300
   - st-lpc: cleanups
   - stm32: fix wakeup"

* tag 'rtc-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (21 commits)
  rtc: Add rtc driver for the Loongson family chips
  rtc: Remove the Loongson-1 RTC driver
  dt-bindings: rtc: Split loongson,ls2x-rtc into SoC-based compatibles
  rtc: rv3028: make rv3028 probeable from userspace
  rtc: isl1208: Add support for the built-in RTC on the PMIC RAA215300
  rtc: isl1208: Add isl1208_set_xtoscb()
  rtc: isl1208: Drop enum isl1208_id and split isl1208_configs[]
  rtc: isl1208: Make similar I2C and DT-based matching table
  rtc: isl1208: Drop name variable
  dt-bindings: rtc: isil,isl1208: Document clock and clock-names properties
  dt-bindings: rtc: isl1208: Convert to json-schema
  rtc: st-lpc: Simplify clk handling in st_rtc_probe()
  rtc: st-lpc: Release some resources in st_rtc_probe() in case of error
  rtc: stm32: remove dedicated wakeup management
  dt-bindings: rtc: restrict node name suffixes
  rtc: add HAS_IOPORT dependencies
  rtc: Switch i2c drivers back to use .probe()
  rtc: rv3032: constify pointers to hwmon_channel_info
  rtc: isl12022: constify pointers to hwmon_channel_info
  rtc: ds3232: constify pointers to hwmon_channel_info
  ...

Pull i3c updates from Alexandre Belloni:

 - svc: fix suspend/resume on some platforms, fix locking issues

* tag 'i3c/for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: svc: add NACK check after start byte sent
  i3c: master: svc: fix cpu schedule in spin lock
  i3c: master: svc: fix i3c suspend/resume issue

Commit 408579cd ("mm: Update do_vmi_align_munmap() return
semantics") made the return value and locking semantics of
do_vmi_align_munmap() more straightforward, but in the process it ended
up unlocking the mmap lock just a tad too early: the debug code doing
the mmap layout validation still needs to run with the lock held, or
things might change under it while it's trying to validate things.

So just move the unlocking to after the validate_mm() call.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/ZKIsoMOT71uwCIZX@xsang-OptiPlex-9020/
Fixes: 408579cd ("mm: Update do_vmi_align_munmap() return semantics")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While our user stacks can grow either down (all common architectures) or
up (parisc and the ia64 register stack), the initial stack setup when we
copy the argument and environment strings to the new stack at execve()
time is always done by extending the stack downwards.

But it turns out that in commit 8d7071af ("mm: always expand the
stack with the mmap write lock held"), as part of making the stack
growing code more robust, 'expand_downwards()' was now made to actually
check the vma flags:

	if (!(vma->vm_flags & VM_GROWSDOWN))
		return -EFAULT;

and that meant that this execve-time stack expansion started failing on
parisc, because on that architecture, the stack flags do not contain the
VM_GROWSDOWN bit.

At the same time the new check in expand_downwards() is clearly correct,
and simplified the callers, so let's not remove it.

The solution is instead to just codify the fact that yes, during
execve(), the stack grows down.  This not only matches reality, it ends
up being particularly simple: we already have special execve-time flags
for the stack (VM_STACK_INCOMPLETE_SETUP) and use those flags to avoid
page migration during this setup time (see vma_is_temporary_stack() and
invalid_migration_vma()).

So just add VM_GROWSDOWN to that set of temporary flags, and now our
stack flags automatically match reality, and the parisc stack expansion
works again.

Note that the VM_STACK_INCOMPLETE_SETUP bits will be cleared when the
stack is finalized, so we only add the extra VM_GROWSDOWN bit on
CONFIG_STACK_GROWSUP architectures (ie parisc) rather than adding it in
general.

Link: https://lore.kernel.org/all/612eaa53-6904-6e16-67fc-394f4faa0e16@bell.net/
Link: https://lore.kernel.org/all/5fd98a09-4792-1433-752d-029ae3545168@gmx.de/
Fixes: 8d7071af ("mm: always expand the stack with the mmap write lock held")
Reported-by: John David Anglin <dave.anglin@bell.net>
Reported-and-tested-by: Helge Deller <deller@gmx.de>
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull iomap updates from Darrick Wong:

 - Fix a type signature mismatch

 - Drop Christoph as maintainer

* tag 'iomap-6.5-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: drop me [hch] from MAINTAINERS for iomap
  fs: iomap: Change the type of blocksize from 'int' to 'unsigned int' in iomap_file_buffered_write_punch_delalloc

Pull vfs fix from Christian Brauner:
 "A fix for the backing file work from this cycle.

  When init_file() failed it would call file_free_rcu() on the file
  allocated by the caller of init_file(). It naively assumed that the
  correct cleanup operation would be called depending on whether it is a
  regular file or a backing file. However, that presupposes that the
  FMODE_BACKING flag would already be set which it won't be as that is
  done in the caller of init_file().

  Fix that bug by moving the cleanup of the allocated file into the
  caller where it belongs in the first place. There's no good reason for
  init_file() to consume resources it didn't allocate. This is a
  mainline only fix and was reported by syzbot. The fix was validated by
  syzbot against the provided reproducer"

* tag 'v6.5/vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs: move cleanup from init_file() into its callers

Pull i2c updates from Wolfram Sang:

 - I2C has now a co-maintainer taking care of the host drivers. Welcome
   Andi Shyti and have fun!

 - platform remove callback converted to return void in drivers

 - simplify drivers by using devm_clk_get_enabled()

 - introduce i2c_get_match_data() to avoid more boilerplate code
   (especially since the core stopped delivering an i2c_device_id)

 - and the usual bunch of driver updates

* tag 'i2c-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  i2c: uniphier: Use devm_clk_get_enabled()
  i2c: uniphier-f: Use devm_clk_get_enabled()
  i2c: owl: Use devm_clk_get_enabled()
  i2c: lpc2k: Use devm_clk_get_enabled()
  i2c: hix5hd2: Use devm_clk_get_enabled()
  i2c: sun6i-p2wi: Use devm_clk_get_enabled()
  i2c: pasemi-platform: Use devm_clk_get_enabled()
  i2c: mt7621: Use devm_clk_get_enabled()
  i2c: xiic: Use devm_clk_get_enabled()
  i2c: davinci: Use platform table macro over module_alias
  i2c: ocores: use devm_ managed clks
  i2c: nomadik: Use dev_err_probe() whenever possible
  i2c: nomadik: Use devm_clk_get_enabled()
  i2c: nomadik: Remove unnecessary goto label
  usb: typec: ucsi: Mark dGPUs as DEVICE scope
  i2c: wmt: Use devm_platform_get_and_ioremap_resource()
  i2c: versatile: Use devm_platform_get_and_ioremap_resource()
  i2c: hix5hd2: Add I2C_M_STOP flag support for i2c-hix5hd2 driver.
  i2c: mpc: Use of_property_read_reg() to parse "reg"
  i2c: imx-lpi2c: Don't open-code DIV_ROUND_UP
  ...

Pull parisc updates from Helge Deller:

 - Add missing cacheflush() syscall

 - Fix STI console on 64-bit-only machines

 - Move kernel debug options to Kconfig.debug

 - Lots of warning fixes in arch/parisc/ and drivers/parisc/ when
   compiled with W=1

 - Enable some more graphics drivers in refreshed defconfigs

* tag 'parisc-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (29 commits)
  parisc: Refresh defconfigs
  parisc: irq: Add irq-related function declarations
  parisc: Move init function declarations into header file
  parisc: dino: Make dino_init() returning void
  parisc: lba_pci: Mark two variables __maybe_unused
  parisc: unaligned: Include header file to avoid missing prototype warnings
  parisc: signal: Mark do_notify_resume() and sys_rt_sigreturn() asmlinkage
  parisc: unwind: Mark start and stop variables __maybe_unused
  parisc: init: Drop unused variable end_paddr
  parisc: traps: Mark functions static
  parisc: processor: Fix kdoc for init_cpu_profiler()
  parisc: sys_parisc: parisc_personality() is called from asm code
  parisc: ccio-dma: Fix kdoc and compiler warnings
  parisc: pdc_stable: Fix kdoc and compiler warnings
  parisc: pci-dma: Make pcxl_alloc_range() static
  parisc: Mark image_size __maybe_unused in perf_write()
  parisc: module: Mark symindex __maybe_unused
  parisc: pdc_chassis: Fix kdoc warnings
  parisc: firmware: Fix kdoc warnings
  parisc: drivers: Fix kdoc warnings
  ...

The use of file_free_rcu() in init_file() to free the struct that was
allocated by the caller was hacky and we got what we deserved.

Let init_file() and its callers take care of cleaning up each after
their own allocated resources on error.

Fixes: 62d53c4a ("fs: use backing_file container for internal files with "fake" f_path") # mainline only
Reported-and-tested-by: syzbot+ada42aab05cf51b00e98@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Message-Id: <20230701171134.239409-1-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Pull arch/csky update from Guo Ren:

 - Correct thread.trap_no restore of uprobe

* tag 'csky-for-linus-6.5' of https://github.com/c-sky/csky-linux:
  csky: uprobes: Restore thread.trap_no

Pull NFS client updates from Trond Myklebust:
"Stable fixes and other bugfixes:

   - nfs: don't report STATX_BTIME in ->getattr

   - Revert 'NFSv4: Retry LOCK on OLD_STATEID during delegation return'
     since it breaks NFSv4 state recovery.

   - NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION

   - Fix the NFSv4.2 xattr cache shrinker_id

   - Force a ctime update after a NFSv4.2 SETXATTR call

  Features and cleanups:

   - NFS and RPC over TLS client code from Chuck Lever

   - Support for use of abstract unix socket addresses with the rpcbind
     daemon

   - Sysfs API to allow shutdown of the kernel RPC client and prevent
     umount() hangs if the server is known to be permanently down

   - XDR cleanups from Anna"

* tag 'nfs-for-6.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (33 commits)
  Revert "NFSv4: Retry LOCK on OLD_STATEID during delegation return"
  NFS: Don't cleanup sysfs superblock entry if uninitialized
  nfs: don't report STATX_BTIME in ->getattr
  NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION
  NFSv4.2: fix wrong shrinker_id
  NFSv4: Clean up some shutdown loops
  NFS: Cancel all existing RPC tasks when shutdown
  NFS: add sysfs shutdown knob
  NFS: add a sysfs link to the acl rpc_client
  NFS: add a sysfs link to the lockd rpc_client
  NFS: Add sysfs links to sunrpc clients for nfs_clients
  NFS: add superblock sysfs entries
  NFS: Make all of /sys/fs/nfs network-namespace unique
  NFS: Open-code the nfs_kset kset_create_and_add()
  NFS: rename nfs_client_kobj to nfs_net_kobj
  NFS: rename nfs_client_kset to nfs_kset
  NFS: Add an "xprtsec=" NFS mount option
  NFS: Have struct nfs_client carry a TLS policy field
  SUNRPC: Add a TCP-with-TLS RPC transport class
  SUNRPC: Capture CMSG metadata on client-side receive
  ...

Pull x86 fix from Thomas Gleixner:
 "A single regression fix for x86:

  Moving the invocation of arch_cpu_finalize_init() earlier in the boot
  process caused a boot regression on IBT enabled system.

  The root cause is not the move of arch_cpu_finalize_init() itself. The
  system fails to boot because the subsequent efi_enter_virtual_mode()
  code has a non-IBT safe EFI call inside. This was not noticed before
  because IBT was enabled after the EFI initialization.

  Switching the EFI call to use the IBT safe wrapper cures the problem"

* tag 'x86-urgent-2023-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Make efi_set_virtual_address_map IBT safe

Pull Kbuild updates from Masahiro Yamada:

 - Remove the deprecated rule to build *.dtbo from *.dts

 - Refactor section mismatch detection in modpost

 - Fix bogus ARM section mismatch detections

 - Fix error of 'make gtags' with O= option

 - Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error
   with the latest LLVM version

 - Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed

 - Ignore more compiler-generated symbols for kallsyms

 - Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles

 - Enable more kernel-doc warnings with W=2

 - Refactor <linux/export.h> by generating KSYMTAB data by modpost

 - Deprecate <asm/export.h> and <asm-generic/export.h>

 - Remove the EXPORT_DATA_SYMBOL macro

 - Move the check for static EXPORT_SYMBOL back to modpost, which makes
   the build faster

 - Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm

 - Warn missing MODULE_DESCRIPTION when building modules with W=1

 - Make 'make clean' robust against too long argument error

 - Exclude more objects from GCOV to fix CFI failures with GCOV

 - Allow 'make modules_install' to install modules.builtin and
   modules.builtin.modinfo even when CONFIG_MODULES is disabled

 - Include modules.builtin and modules.builtin.modinfo in the
   linux-image Debian package even when CONFIG_MODULES is disabled

 - Revive "Entering directory" logging for the latest Make version

* tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (72 commits)
  modpost: define more R_ARM_* for old distributions
  kbuild: revive "Entering directory" for Make >= 4.4.1
  kbuild: set correct abs_srctree and abs_objtree for package builds
  scripts/mksysmap: Ignore prefixed KCFI symbols
  kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb
  kbuild: builddeb: always make modules_install, to install modules.builtin*
  modpost: continue even with unknown relocation type
  modpost: factor out Elf_Sym pointer calculation to section_rel()
  modpost: factor out inst location calculation to section_rel()
  kbuild: Disable GCOV for *.mod.o
  kbuild: Fix CFI failures with GCOV
  kbuild: make clean rule robust against too long argument error
  script: modpost: emit a warning when the description is missing
  kbuild: make modules_install copy modules.builtin(.modinfo)
  linux/export.h: rename 'sec' argument to 'license'
  modpost: show offset from symbol for section mismatch warnings
  modpost: merge two similar section mismatch warnings
  kbuild: implement CONFIG_TRIM_UNUSED_KSYMS without recursion
  modpost: use null string instead of NULL pointer for default namespace
  modpost: squash sym_update_namespace() into sym_add_exported()
  ...

Pull arm64 fix from Catalin Marinas:
 "Fix memory corruption (overwriting the kmalloc redzone) when saving
  the SVE state while in SVE streaming mode"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: sme: Use STR P to clear FFR context field in streaming SVE mode

Pull CXL updates from Dan Williams:
 "The highlights in terms of new functionality are support for the
  standard CXL Performance Monitor definition that appeared in CXL 3.0,
  support for device sanitization (wiping all data from a device),
  secure-erase (re-keying encryption of user data), and support for
  firmware update. The firmware update support is notable as it reuses
  the simple sysfs_upload interface to just cat(1) a blob to a sysfs
  file and pipe that to the device.

  Additionally there are a substantial number of cleanups and
  reorganizations to get ready for RCH error handling (RCH == Restricted
  CXL Host == current shipping hardware generation / pre CXL-2.0
  topologies) and type-2 (accelerator / vendor specific) devices.

  For vendor specific devices they implement a subset of what the
  generic type-3 (generic memory expander) driver expects. As a result
  the rework decouples optional infrastructure from the core driver
  context.

  For RCH topologies, where the specification working group did not want
  to confuse pre-CXL-aware operating systems, many of the standard
  registers are hidden which makes support standard bus features like
  AER (PCIe Advanced Error Reporting) difficult. The rework arranges for
  the driver to help the PCI-AER core. Bjorn is on board with this
  direction but a late regression disocvery means the completion of this
  functionality needs to cook a bit longer, so it is code
  reorganizations only for now.

  Summary:

   - Add infrastructure for supporting background commands along with
     support for device sanitization and firmware update

   - Introduce a CXL performance monitoring unit driver based on the
     common definition in the specification.

   - Land some preparatory cleanup and refactoring for the anticipated
     arrival of CXL type-2 (accelerator devices) and CXL RCH (CXL-v1.1
     topology) error handling.

   - Rework CPU cache management with respect to region configuration
     (device hotplug or other dynamic changes to memory interleaving)

   - Fix region reconfiguration vs CXL decoder ordering rules"

* tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (51 commits)
  cxl: Fix one kernel-doc comment
  cxl/pci: Use correct flag for sanitize polling
  docs: perf: Minimal introduction the the CXL PMU device and driver
  perf: CXL Performance Monitoring Unit driver
  tools/testing/cxl: add firmware update emulation to CXL memdevs
  tools/testing/cxl: Use named effects for the Command Effect Log
  tools/testing/cxl: Fix command effects for inject/clear poison
  cxl: add a firmware update mechanism using the sysfs firmware loader
  cxl/test: Add Secure Erase opcode support
  cxl/mem: Support Secure Erase
  cxl/test: Add Sanitize opcode support
  cxl/mem: Wire up Sanitization support
  cxl/mbox: Add sanitization handling machinery
  cxl/mem: Introduce security state sysfs file
  cxl/mbox: Allow for IRQ_NONE case in the isr
  Revert "cxl/port: Enable the HDM decoder capability for switch ports"
  cxl/memdev: Formalize endpoint port linkage
  cxl/pci: Unconditionally unmask 256B Flit errors
  cxl/region: Manage decoder target_type at decoder-attach time
  cxl/hdm: Default CXL_DEVTYPE_DEVMEM decoders to CXL_DECODER_DEVMEM
  ...

Pull nvdimm and DAX updates from Vishal Verma:
 "This is mostly small cleanups and fixes, with the biggest change being
  the change to the DAX fault handler allowing it to return
  VM_FAULT_HWPOISON.

  Summary:

   - DAX fixes and cleanups including a use after free, extra
     references, and device unregistration, and a redundant variable.

   - Allow the DAX fault handler to return VM_FAULT_HWPOISON

   - A few libnvdimm cleanups such as making some functions and
     variables static where sufficient.

   - Add a few missing prototypes for wrapped functions in
     tools/testing/nvdimm"

* tag 'libnvdimm-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: enable dax fault handler to report VM_FAULT_HWPOISON
  nvdimm: make security_show static
  nvdimm: make nd_class variable static
  dax/kmem: Pass valid argument to memory_group_register_static
  fsdax: remove redundant variable 'error'
  dax: Cleanup extra dax_region references
  dax: Introduce alloc_dev_dax_id()
  dax: Use device_unregister() in unregister_dax_mapping()
  dax: Fix dax_mapping_release() use after free
  tools/testing/nvdimm: Drop empty platform remove function
  libnvdimm: mark 'security_show' static again
  testing: nvdimm: add missing prototypes for wrapped functions
  dax: fix missing-prototype warnings

Pull another sysctl fix from Luis Chamberlain:
 "Just one minor nit I forgot to merge"

* tag 'sysctl-fixes-v2-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  sysctl: set variable sysctl_mount_point storage-class-specifier to static

Merge tag 'flex-array-transformations-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull flexible-array update from Gustavo Silva:
 "Transform a zero-length array into a C99 flexible-array member.

  This addresses a build failure with Clang by fixing multiple
  '-Warray-bounds' warnings in drivers/staging/ks7010/ks_wlan_net.c"

* tag 'flex-array-transformations-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  uapi: wireless: Replace zero-length array with flexible-array member

Before commit d67790dd ("overflow: Add struct_size_t() helper") only
struct_size() existed, which expects a valid pointer instance containing
the flexible array.

However, when we determine the default struct pid allocation size for
the associated kmem cache of a pid namespace we need to take the nesting
depth of the pid namespace into account without an variable instance
necessarily being available.

In commit b69f0aeb ("pid: Replace struct pid 1-element array with
flex-array") we used to handle this the old fashioned way and cast NULL
to a struct pid pointer type. However, we do apparently have a dedicated
struct_size_t() helper for exactly this case. So switch to that.
Suggested-by: Kees Cook <keescook@chromium.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since do_vmi_align_munmap() will always honor the downgrade request on
the success, the callers no longer have to deal with confusing return
codes.  Since all callers that request downgrade actually want the lock
to be dropped, change the downgrade to an unlock request.

Note that the lock still needs to be held in read mode during the page
table clean up to avoid races with a map request.

Update do_vmi_align_munmap() to return 0 for success.  Clean up the
callers and comments to always expect the unlock to be honored on the
success path.  The error path will always leave the lock untouched.

As part of the cleanup, the wrapper function do_vmi_munmap() and callers
to the wrapper are also updated.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-mm/20230629191414.1215929-1-willy@infradead.org/Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that stack growth must always hold the mmap_lock for write, we can
always downgrade the mmap_lock to read and safely unmap pages from the
page table, even if we're next to a stack.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MMU version of lock_mm_and_find_vma releases the mm lock before
returning when VMA is not found. Do the same in noMMU version.
This fixes hang on an attempt to handle protection fault.

Fixes: d85a143b ("xtensa: fix NOMMU build with lock_mm_and_find_vma() conversion")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull smb client updates from Steve French:

 - Deferred close fix

 - Debugging improvements: display missing mount option, dump rc on
   invalidate inode failures, print client_guid in DebugData, log
   session id when matching session not found in reconnect, new dynamic
   tracepoint for session not found

 - Mount fixes including: potential null dereference, and possible
   memory leak and path name parsing when double slashes

 - Fix potential use after free in compounding

 - Two crediting (flow control) fixes: fix for crediting leak (stress
   scenario with excess lease credits) and better locking around
   updating credits

 - Three cleanups from issues pointed out by the kernel test robot

 - Session state check improvements (including for potential use after
   free)

 - DFS fixes: Fix for getattr on link when DFS disabled, fix for DFS
   mounts to same share with different prefix paths, DFS mount error
   checking improvement

* tag '6.5-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: new dynamic tracepoint to track ses not found errors
  cifs: log session id when a matching ses is not found
  smb: client: improve DFS mount check
  smb: client: fix shared DFS root mounts with different prefixes
  smb: client: fix parsing of source mount option
  smb: client: fix broken file attrs with nodfs mounts
  cifs: print client_guid in DebugData
  cifs: fix session state check in smb2_find_smb_ses
  cifs: fix session state check in reconnect to avoid use-after-free issue
  cifs: do all necessary checks for credits within or before locking
  cifs: prevent use-after-free by freeing the cfile later
  smb: client: fix warning in generic_ip_connect()
  smb: client: fix warning in CIFSFindNext()
  smb: client: fix warning in CIFSFindFirst()
  smb3: do not reserve too many oplock credits
  cifs: print more detail when invalidate_inode_mapping fails
  smb: client: fix warning in cifs_smb3_do_mount()
  smb: client: fix warning in cifs_match_super()
  cifs: print nosharesock value while dumping mount options
  SMB3: Do not send lease break acknowledgment if all file handles have been closed

Pull ksmbd server updates from Steve French:

 - two fixes for compounding bugs (make sure no out of bound reads with
   less common combinations of commands in the compound)

 - eight minor cleanup patches (e.g. simplifying return values, replace
   one element array, use of kzalloc where simpler)

 - fix for clang warning on possible overflow in filename conversion

* tag '6.5-rc-ksmbd-server-fixes-part1' of git://git.samba.org/ksmbd:
  ksmbd: avoid field overflow warning
  ksmbd: Replace one-element array with flexible-array member
  ksmbd: Use struct_size() helper in ksmbd_negotiate_smb_dialect()
  ksmbd: add missing compound request handing in some commands
  ksmbd: fix out of bounds read in smb2_sess_setup
  ksmbd: Replace the ternary conditional operator with min()
  ksmbd: use kvzalloc instead of kvmalloc
  ksmbd: Change the return value of ksmbd_vfs_query_maximal_access to void
  ksmbd: return a literal instead of 'err' in ksmbd_vfs_kern_path_locked()
  ksmbd: use kzalloc() instead of __GFP_ZERO
  ksmbd: remove unused ksmbd_tree_conn_share function

Pull nfsd fix from Chuck Lever:

 - Fix ordering of attributes in NFSv4 GETATTR replies

* tag 'nfsd-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: Fix creation time serialization order

Merge tag 'livepatching-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching update from Petr Mladek:

 - Make a variable static to fix a sparse warning

* tag 'livepatching-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch: Make 'klp_stack_entries' static

Pull EFI updates from Ard Biesheuvel:
 "Although some more stuff is brewing, the EFI changes that are ready
  for mainline are few this cycle:

   - improve the PCI DMA paranoia logic in the EFI stub

   - some constification changes

   - add statfs support to efivarfs

   - allow user space to enumerate updatable firmware resources without
     CAP_SYS_ADMIN"

* tag 'efi-next-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/libstub: Disable PCI DMA before grabbing the EFI memory map
  efi/esrt: Allow ESRT access without CAP_SYS_ADMIN
  efivarfs: expose used and total size
  efi: make kobj_type structure constant
  efi: x86: make kobj_type structure constant

Pull crypto updates from Herbert Xu:
 "API:
   - Add linear akcipher/sig API
   - Add tfm cloning (hmac, cmac)
   - Add statesize to crypto_ahash

  Algorithms:
   - Allow only odd e and restrict value in FIPS mode for RSA
   - Replace LFSR with SHA3-256 in jitter
   - Add interface for gathering of raw entropy in jitter

  Drivers:
   - Fix race on data_avail and actual data in hwrng/virtio
   - Add hash and HMAC support in starfive
   - Add RSA algo support in starfive
   - Add support for PCI device 0x156E in ccp"

* tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (85 commits)
  crypto: akcipher - Do not copy dst if it is NULL
  crypto: sig - Fix verify call
  crypto: akcipher - Set request tfm on sync path
  crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled
  hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS
  hwrng: st - keep clock enabled while hwrng is registered
  hwrng: st - support compile-testing
  hwrng: imx-rngc - fix the timeout for init and self check
  KEYS: asymmetric: Use new crypto interface without scatterlists
  KEYS: asymmetric: Move sm2 code into x509_public_key
  KEYS: Add forward declaration in asymmetric-parser.h
  crypto: sig - Add interface for sign/verify
  crypto: akcipher - Add sync interface without SG lists
  crypto: cipher - On clone do crypto_mod_get()
  crypto: api - Add __crypto_alloc_tfmgfp
  crypto: api - Remove crypto_init_ops()
  crypto: rsa - allow only odd e and restrict value in FIPS mode
  crypto: geniv - Split geniv out of AEAD Kconfig option
  crypto: algboss - Add missing dependency on RNG2
  crypto: starfive - Add RSA algo support
  ...

It turns out that xtensa has a really odd configuration situation: you
can do a no-MMU config, but still have the page fault code enabled.
Which doesn't sound all that sensible, but it turns out that xtensa can
have protection faults even without the MMU, and we have this:

    config PFAULT
        bool "Handle protection faults" if EXPERT && !MMU
        default y
        help
          Handle protection faults. MMU configurations must enable it.
          noMMU configurations may disable it if used memory map never
          generates protection faults or faults are always fatal.

          If unsure, say Y.

which completely violated my expectations of the page fault handling.

End result: Guenter reports that the xtensa no-MMU builds all fail with

  arch/xtensa/mm/fault.c: In function ‘do_page_fault’:
  arch/xtensa/mm/fault.c:133:8: error: implicit declaration of function ‘lock_mm_and_find_vma’

because I never exposed the new lock_mm_and_find_vma() function for the
no-MMU case.

Doing so is simple enough, and fixes the problem.
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: a050ba1e ("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

smatch reports
fs/proc/proc_sysctl.c:32:18: warning: symbol
  'sysctl_mount_point' was not declared. Should it be static?

This variable is only used in its defining file, so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

Sec proxy/message manager data buffer is 60 bytes with the last of the
registers indicating transmission completion. This however poses a bit
of a challenge.

The backing memory for sec_proxy / message manager is regular memory,
and all sec proxy does is to trigger a burst of all 60 bytes of data
over to the target thread backing ring accelerator. It doesn't do a
memory scrub when it moves data out in the burst. When we transmit
multiple messages, remnants of previous message is also transmitted
which results in some random data being set in TISCI fields of
messages that have been expanded forward.

The entire concept of backward compatibility hinges on the fact that
the unused message fields remain 0x0 allowing for 0x0 value to be
specially considered when backward compatibility of message extension
is done.

So, instead of just writing the completion register, we continue
to fill the message buffer up with 0x0 (note: for partial message
involving completion, we already do this).

This allows us to scale and introduce ABI changes back also work with
other boot stages that may have left data in the internal memory.

While at this, be consistent and explicit with the data_reg pointer
increment.

Fixes: aace66b1 ("mailbox: Introduce TI message manager driver")
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Tegra264 has a slightly different doorbell register layout than
previous chips.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stefan Kristiansson <stefank@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Add the compatible string for the HSP block found on the Tegra264 SoC.
The HSP block in Tegra264 is not register compatible with the one in
Tegra194 or Tegra234 hence there is no fallback compatibility string.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Convert the DT binding document for bcm2835-mbox from .txt to YAML.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Add compatible for the Qualcomm IPQ5018 APCS block.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Pull VFIO updates from Alex Williamson:

 - Adjust log levels for common messages (Oleksandr Natalenko, Alex
   Williamson)

 - Support for dynamic MSI-X allocation (Reinette Chatre)

 - Enable and report PCIe AtomicOp Completer capabilities (Alex
   Williamson)

 - Cleanup Kconfigs for vfio bus drivers (Alex Williamson)

 - Add support for CDX bus based devices (Nipun Gupta)

 - Fix race with concurrent mdev initialization (Eric Farman)

* tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfio:
  vfio/mdev: Move the compat_class initialization to module init
  vfio/cdx: add support for CDX bus
  vfio/fsl: Create Kconfig sub-menu
  vfio/platform: Cleanup Kconfig
  vfio/pci: Cleanup Kconfig
  vfio/pci-core: Add capability for AtomicOp completer support
  vfio/pci: Also demote hiding standard cap messages
  vfio/pci: Clear VFIO_IRQ_INFO_NORESIZE for MSI-X
  vfio/pci: Support dynamic MSI-X
  vfio/pci: Probe and store ability to support dynamic MSI-X
  vfio/pci: Use bitfield for struct vfio_pci_core_device flags
  vfio/pci: Update stale comment
  vfio/pci: Remove interrupt context counter
  vfio/pci: Use xarray for interrupt context storage
  vfio/pci: Move to single error path
  vfio/pci: Prepare for dynamic interrupt context storage
  vfio/pci: Remove negative check on unsigned vector
  vfio/pci: Consolidate irq cleanup on MSI/MSI-X disable
  vfio/pci: demote hiding ecap messages to debug level