- 23 Aug, 2023 37 commits
-
-
Zhangjin Wu authored
align the test values for different runs and different architectures. Since the total number of tests is not bigger than 1000 currently, let's align them with "%3d". Signed-off-by:
Zhangjin Wu <falcon@tinylab.org> [wt: s/%03d/%3d/ as discussed with Zhangjin] Link: https://lore.kernel.org/lkml/20230709185112.97236-1-falcon@tinylab.org/Signed-off-by:
Willy Tarreau <w@1wt.eu>
-
Zhangjin Wu authored
Let's count and print the total number of tests, now, the data of passed, skipped and failed have the same format. Signed-off-by:
-
Zhangjin Wu authored
one of the test status: success, warning and failure is printed to summarize the passed, skipped and failed values. - "success" means no skipped and no failed. - "warning" means has at least one skipped and no failed. - "failure" means all tests are failed. Suggested-by:
-
Zhangjin Wu authored
argv0 is readable and chmodable, let's use it for chmod test, but a safe umask should be used, the readable and executable modes should be reserved. Reviewed-by:
Thomas Weißschuh <linux@weissschuh.net> Signed-off-by:
-
Zhangjin Wu authored
Since argv0 also works for CONFIG_PROC_FS=n, let's use it instead of '/proc/self/exe'. Signed-off-by:
-
Zhangjin Wu authored
'/proc/self/' is a good path which doesn't have stale time info but it is only available for CONFIG_PROC_FS=y. When CONFIG_PROC_FS=n, use argv0 instead of '/proc/self', use '/' for the worst case. Reviewed-by:
-
Zhangjin Wu authored
The PWD environment variable has the path of the nolibc-test program, the current path must be the same as it, otherwise, the test cases will fail with relative path (e.g. ./nolibc-test). Since only chdir_root really changes the current path, let's restore it with the PWD environment variable. Signed-off-by:
-
Zhangjin Wu authored
The vfprintf test case require to open a temporary file to write, the old memfd_create() method is perfect but has strong dependency on MEMFD_CREATE and also TMPFS or HUGETLBFS (see fs/Kconfig): config MEMFD_CREATE def_bool TMPFS || HUGETLBFS And from v6.2, MFD_NOEXEC_SEAL must be passed for the non-executable memfd, otherwise, The kernel warning will be output to the test result like this: Running test 'vfprintf' 0 emptymemfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'init' "" = "" [OK] To avoid such warning and also to remove the MEMFD_CREATE dependency, let's open a file from tmpfs directly. The /tmp directory is used to detect the existing of tmpfs, if not there, skip instead of fail. And further, for pid == 1, the initramfs is loaded as ramfs, which can be used as tmpfs, so, it is able to further remove TMPFS dependency too. Suggested-by: -
Zhangjin Wu authored
create a /tmp directory. If it succeeds, the directory is writable, which is normally the case when booted from an initramfs anyway. This will be used instead of procfs for some tests. Reviewed-by:
-
Zhangjin Wu authored
For CONFIG_PROC_FS=n, the /proc is not mountable, but the /proc directory has been created in the prepare() stage whenever /proc is there or not. so, the checking of /proc in the run_syscall() stage will be always true and at last it will fail all of the procfs dependent test cases, which deviates from the 'cond' check design of the EXPECT_xx macros, without procfs, these test cases should be skipped instead of failed. To solve this issue, one method is checking /proc/self instead of /proc, another method is removing the /proc directory completely for CONFIG_PROC_FS=n, we apply the second method to avoid misleading the users. Reviewed-by:
-
Zhangjin Wu authored
A new rmdir_blah test case is added to remove a non-existing /blah, which expects failure with ENOENT errno. Reviewed-by:
-
Zhangjin Wu authored
a reverse operation of mkdir() is meaningful, add rmdir() here. required by nolibc-test to remove /proc while CONFIG_PROC_FS is not enabled. Reviewed-by:
-
Zhangjin Wu authored
For CONFIG_NET=n, there would be no /proc/self/net, so, use /proc/self/cmdline instead. Reviewed-by:
-
Zhangjin Wu authored
kernel parameters allow pass two types of strings, one type is like 'noapic', another type is like 'panic=5', the first type is passed as arguments of the init program, the second type is passed as environment variables of the init program. when users pass kernel parameters like this: noapic NOLIBC_TEST=syscall our nolibc-test program will use the test setting from argv[1] and ignore the one from NOLIBC_TEST environment variable, and at last, it will print the following line and ignore the whole test setting. Ignoring unknown test name 'noapic' reversing the parsing order does solve the above issue: test = getenv("NOLIBC_TEST"); if (test) test = argv[1]; but it still doesn't work with such kernel parameters (without NOLIBC_TEST environment variable): noapic FOO=bar To support all of the potential kernel parameters, let's verify the test setting from both of argv[1] and NOLIBC_TEST environment variable. Reviewed-by: -
Zhangjin Wu authored
Since both glibc and musl provide RB_ flags via <sys/reboot.h>, and we just add RB_ flags for nolibc, let's use RB_ flags instead of LINUX_REBOOT_ flags and only reserve the required <sys/reboot.h> header. This allows compile libc-test for musl libc without the linux headers. Signed-off-by:
-
Zhangjin Wu authored
Both glibc and musl provide RB_ flags via <sys/reboot.h> for reboot(), they don't need to include <linux/reboot.h>, let nolibc provide RB_ flags too. Signed-off-by:
-
Zhangjin Wu authored
musl limits the fast signed int in 32bit, but glibc and nolibc don't, to let such test cases work on musl, let's provide the type based SINT_MAX_OF_TYPE(type) and SINT_MIN_OF_TYPE(type). Suggested-by:
-
Zhangjin Wu authored
_GNU_SOURCE Implies _LARGEFILE64_SOURCE in glibc, but in musl, the default configuration doesn't enable _LARGEFILE64_SOURCE. >From include/dirent.h of musl, getdents64 is provided as getdents when _LARGEFILE64_SOURCE is defined. #if defined(_LARGEFILE64_SOURCE) ... #define getdents64 getdents #endif Let's define _LARGEFILE64_SOURCE to fix up this compile error: tools/testing/selftests/nolibc/nolibc-test.c: In function ‘test_getdents64’: tools/testing/selftests/nolibc/nolibc-test.c:453:8: warning: implicit declaration of function ‘getdents64’; did you mean ‘getdents’? [-Wimplicit-function-declaration] 453 | ret = getdents64(fd, (void *)buffer, sizeof(buffer)); | ^~~~~~~~~~ | getdents /usr/bin/ld: /tmp/ccKILm5u.o: in function `test_getdents64': nolibc-test.c:(.text+0xe3e): undefined reference to `getdents64' collect2: error: ld returned 1 exit status Reviewed-by: -
Zhangjin Wu authored
As the gettid manpage [1] shows, glibc 2.30 has gettid support, so, let's enable the test for glibc >= 2.30. gettid works on musl too. [1]: https://man7.org/linux/man-pages/man2/gettid.2.htmlReviewed-by:
-
Zhangjin Wu authored
Use another invalid address (void *)1 instead of NULL to silence this compile warning with glibc: $ make libc-test CC libc-test nolibc-test.c: In function ‘run_syscall’: nolibc-test.c:622:49: warning: null argument where non-null required (argument 1) [-Wnonnull] 622 | CASE_TEST(stat_fault); EXPECT_SYSER(1, stat(NULL, &stat_buf), -1, EFAULT); break; | ^~~~ nolibc-test.c:304:79: note: in definition of macro ‘EXPECT_SYSER2’ 304 | do { if (!cond) pad_spc(llen, 64, "[SKIPPED]\n"); else ret += expect_syserr2(expr, expret, experr1, experr2, llen); } while (0) | ^~~~ nolibc-test.c:622:33: note: in expansion of macro ‘EXPECT_SYSER’ 622 | CASE_TEST(stat_fault); EXPECT_SYSER(1, stat(NULL, &stat_buf), -1, EFAULT); break; Reviewed-by: -
Zhangjin Wu authored
allow run and report glibc or musl based libc-test. Signed-off-by:
-
Zhangjin Wu authored
mmap() a file with a good offset and then munmap() it. a non-zero offset is passed to test the 6th argument of my_syscall6(). Note, it is not easy to find a unique file for mmap() in different scenes, so, a file list is used to search the right one: - /dev/zero: is commonly used to allocate anonymous memory and is likely present and readable - /proc/1/exe: for 'run' and 'run-user' target, 'run-user' can not find '/proc/self/exe' - /proc/self/exe: for 'libc-test' target, normal program 'libc-test' has no permission to access '/proc/1/exe' - argv0: the path of the program itself, let it pass even with worst case scene: no procfs and no /dev/zero Suggested-by:
-
Zhangjin Wu authored
The addr argument of munmap() must be a multiple of the page size, passing invalid (void *)1 addr expects failure with -EINVAL. Signed-off-by:
-
Zhangjin Wu authored
The length argument of mmap() must be greater than 0, passing a zero length argument expects failure with -EINVAL. Signed-off-by:
-
Zhangjin Wu authored
>From musl 0.9.14 (to the latest version 1.2.3), both sbrk() and brk() have almost been disabled for they conflict with malloc, only sbrk(0) is still permitted as a way to get the current location of the program break, let's support such case. EXPECT_PTRNE() is used to expect sbrk() always successfully getting the current break. Signed-off-by:
-
Zhangjin Wu authored
The syscalls like sbrk() and mmap() return pointers, to test them, more pointer compare test macros are required, add them: - EXPECT_PTREQ() expects two equal pointers. - EXPECT_PTRNE() expects two non-equal pointers. - EXPECT_PTRER() expects failure with a specified errno. - EXPECT_PTRER2() expects failure with one of two specified errnos. Signed-off-by:
-
Zhangjin Wu authored
/dev/zero is commonly used to allocate anonymous memory, it is a very good file for tests, let's prepare it. Suggested-by:
-
Zhangjin Wu authored
argv0 is the path to nolibc-test program itself, which is a very good always existing readable file for some tests, let's export it. Note, the path may be absolute or relative, please make sure the tests work with both of them. If it is relative, we must make sure the current path is the one specified by the PWD environment variable. Suggested-by:
-
Zhangjin Wu authored
Fix up the error reported by scripts/checkpatch.pl: ERROR: do not use assignment in if condition #95: FILE: tools/include/nolibc/sys.h:95: + if ((ret = sys_brk(0)) && (sys_brk(ret + inc) == ret + inc)) Apply the new generic __sysret() to merge the SET_ERRNO() and return lines. Signed-off-by: -
Zhangjin Wu authored
Do several cleanups together: - Since all supported architectures have my_syscall6() now, remove the #ifdef check. - Move the mmap() related macros to tools/include/nolibc/types.h and reuse most of them from <linux/mman.h> - Apply the new generic __sysret() to convert the calling of sys_map() to oneline code Note, since MAP_FAILED is -1 on Linux, so we can use the generic __sysret() which returns -1 upon error and still satisfy user land that checks for MAP_FAILED. Suggested-by:
-
Zhangjin Wu authored
No official reference states the errno range, here aligns with musl and glibc and uses [-MAX_ERRNO, -1] instead of all negative ones. - musl: src/internal/syscall_ret.c - glibc: sysdeps/unix/sysv/linux/sysdep.h The MAX_ERRNO used by musl and glibc is 4095, just like the one nolibc defined in tools/include/nolibc/errno.h. Suggested-by:
David Laight <David.Laight@ACULAB.COM> Link: https://lore.kernel.org/linux-riscv/94dd5170929f454fbc0a10a2eb3b108d@AcuMS.aculab.com/Signed-off-by:
-
Zhangjin Wu authored
It is able to pass the 6th argument like the 5th argument via the stack for mips, let's add a new my_syscall6() now, see [1] for details: The mips/o32 system call convention passes arguments 5 through 8 on the user stack. Both mmap() and pselect6() require my_syscall6(). [1]: https://man7.org/linux/man-pages/man2/syscall.2.htmlSigned-off-by:
-
Zhangjin Wu authored
my_syscall<N> share the same long clobber list, define a macro for them. Signed-off-by:
-
Zhangjin Wu authored
my_syscall<N> share the same long clobber list, define a macro for them. Signed-off-by:
-
Zhangjin Wu authored
replace "__asm__ volatile" with "__asm__ volatile" and insert necessary whitespace before "\" to make sure the lines are aligned. $ sed -i -e 's/__asm__ volatile ( /__asm__ volatile ( /g' tools/include/nolibc/*.h Note, arch-s390.h uses post-tab instead of post-whitespaces, must avoid insert whitespace just before the tabs: $ sed -i -e 's/__asm__ volatile (\t/__asm__ volatile (\t/g' tools/include/nolibc/arch-*.h Signed-off-by: -
Zhangjin Wu authored
More than 8 whitespaces of the code indent are replaced with "tab + whitespaces" to fix up such errors reported by scripts/checkpatch.pl: ERROR: code indent should use tabs where possible #64: FILE: tools/include/nolibc/arch-mips.h:64: +^I \$ ERROR: code indent should use tabs where possible #72: FILE: tools/include/nolibc/arch-mips.h:72: +^I "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \$ This command is used: $ sed -i -e '/^\t* /{s/ /\t/g}' tools/include/nolibc/arch-*.h Signed-off-by: -
Thomas Weißschuh authored
Since commit 53fcfafa ("tools/nolibc/unistd: add syscall()") nolibc has support for syscall(2). Use it to get rid of some ifdef-ery. Signed-off-by:
-
- 06 Aug, 2023 3 commits
-
-
Zhangjin Wu authored
Tune the macros in the using order and align most of them. Signed-off-by:
-
Zhangjin Wu authored
Use __sysret() to shrink most of the library routines to oneline code. Removed 266 lines of duplicated code. Reviewed-by:
-
Zhangjin Wu authored
Use __sysret() to shrink the whole _syscall() to oneline code. Reviewed-by:
-
