- 30 Jun, 2011 5 commits
-
-
Werner Almesberger authored
The IEEE 802.15.4 drivers were compiled by default with debugging, which caused them to be rather chatty and slow. This patch silences them. People debugging drivers can still add a #define DEBUG in the beginning of the respective file or use dynamic debug This patch also removes the now unused option CONFIG_FFD. Signed-off-by:
Werner Almesberger <werner@almesberger.net> Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-
Alexander Smirnov authored
Signed-off-by:
Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by:
-
Dmitry Eremin-Solenikov authored
Signed-off-by: -
Dmitry Eremin-Solenikov authored
Signed-off-by: -
Dmitry Eremin-Solenikov authored
Previously dev.platform_data was used to store a pointer to net device. Now this code was gone. Drop it. Signed-off-by:
-
- 29 Jun, 2011 13 commits
-
-
Jon Mason authored
Update MAINTAINERS to refelect new people working on myri10ge Signed-off-by:
Jon Mason <mason@myri.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Mason authored
Update version and copyright Signed-off-by:
-
Jon Mason authored
Miscellaneous white space, style, and other cleanups v2 includes corrections from Joe Perches Signed-off-by:
-
Jon Mason authored
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by:
-
Jon Mason authored
Add myri10ge driver support for the ethtool identify operation. NOTE: Rather than blinking (which is the normal case), when identify is used, the yellow LED turns solid. Signed-off-by:
-
Jon Mason authored
Allow page-based receive to work when small_bytes is set to 0. Signed-off-by:
-
Jon Mason authored
Clean up watchdog reset code: - move code that checks for stuck slice to a common routine - unless there is a confirmed h/w fault, verify that a stuck slice is still stuck in the watchdog worker; if the slice is no longer stuck, abort the reset. - this removes an egregious 2000ms pause in the watchdog worker that was a diagnostic aid (to look for spurious resets) the snuck into production code. v3 includes corrections from Joe Perches Signed-off-by:
-
Jon Mason authored
A SRAM parity error can cause a surprise link down. Since We can recover from SRAM parity errors, mask PCI surprise down events. Signed-off-by:
-
Jon Mason authored
Ensure that our tx queues remain stopped when we stop them in myri10ge_close(). Not doing so can potentially lead to traffic being transmitted when the interface is removed, which can lead to NULL pointer dereferences. Signed-off-by:
-
Barry Grussling authored
This patch enables the 6131 family of chips to forward DSA packets to other switch chips. This is needed if multiple DSA chips are used in a device. Without this patch the chip will drop any DSA packets not destined for it. This patch only enables the forwarding of DSA packets if multiple chips are used in the switch configuration. Signed-off-by:
Barry Grussling <barry@grussling.com> Signed-off-by:
-
Joe Perches authored
Just spelling fixes. Actually, a twofer with vaiables/variables as well. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Stephen Rothwell authored
fixes thses build errors: drivers/net/ll_temac_main.c: In function 'temac_dma_bd_release': drivers/net/ll_temac_main.c:209:4: error: implicit declaration of function 'dma_unmap_single' drivers/net/ll_temac_main.c:215:3: error: implicit declaration of function 'dma_free_coherent' drivers/net/ll_temac_main.c: In function 'temac_dma_bd_init': drivers/net/ll_temac_main.c:243:2: error: implicit declaration of function 'dma_alloc_coherent' drivers/net/ll_temac_main.c:243:14: warning: assignment makes pointer from integer without a cast drivers/net/ll_temac_main.c:251:14: warning: assignment makes pointer from integer without a cast drivers/net/ll_temac_main.c:280:3: error: implicit declaration of function 'dma_map_single' drivers/net/ll_temac_main.c: In function 'temac_start_xmit_done': drivers/net/ll_temac_main.c:628:22: warning: cast to pointer from integer of different size Caused by commit commit b7f080cf ("net: remove mm.h inclusion from netdevice.h"). Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Stephen Rothwell authored
fixes these build errors: drivers/net/can/sja1000/sja1000_of_platform.c: In function 'sja1000_ofp_read_reg': drivers/net/can/sja1000/sja1000_of_platform.c:61:2: error: implicit declaration of function 'in_8' drivers/net/can/sja1000/sja1000_of_platform.c: In function 'sja1000_ofp_write_reg': drivers/net/can/sja1000/sja1000_of_platform.c:67:2: error: implicit declaration of function 'out_8' drivers/net/can/sja1000/sja1000_of_platform.c: In function 'sja1000_ofp_remove': drivers/net/can/sja1000/sja1000_of_platform.c:81:2: error: implicit declaration of function 'iounmap' drivers/net/can/sja1000/sja1000_of_platform.c: In function 'sja1000_ofp_probe': drivers/net/can/sja1000/sja1000_of_platform.c:113:2: error: implicit declaration of function 'ioremap_nocache' drivers/net/can/sja1000/sja1000_of_platform.c:113:7: warning: assignment makes pointer from integer without a cast Caused by commit b7f080cf ("net: remove mm.h inclusion from netdevice.h"). Signed-off-by:
-
- 28 Jun, 2011 17 commits
-
-
Jesse Gross authored
When receiving packets from another guest on the same hypervisor, it's generally possible to receive large packets because no segmentation is necessary and these packets are handled by LRO. However, when doing routing or bridging we must disable LRO and lose this benefit. In these cases GRO can still be used and it is very effective because the packets which are segmented in the hypervisor are received very close together and can easily be merged. CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: Scott Goldman <scottjg@vmware.com> CC: VMware PV-Drivers <pv-drivers@vmware.com> Signed-off-by:
Jesse Gross <jesse@nicira.com> Signed-off-by:
Scott J. Goldman <scottjg@vmware.com> Signed-off-by:
-
Jon Mason authored
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by:
Jon Mason <jdmason@kudzu.us> Signed-off-by:
-
Jon Mason authored
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Also, pci_is_pcie is a better way of determining if the device is PCIE or not (as it uses the same saved PCIE capability offset). Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Jon Mason authored
The PCIE capability offset is saved during PCI bus walking. Use the value from pci_dev instead of checking in the driver and saving it off the the driver specific structure. Also, it will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by:
-
Jon Mason authored
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by:
-
Jon Mason authored
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Also, pci_is_pcie is a better way of determining if the device is PCIE or not (as it uses the same saved PCIE capability offset). Signed-off-by:
-
Jon Mason authored
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Also, pci_is_pcie is a better way of determining if the device is PCIE or not (as it uses the same saved PCIE capability offset). Signed-off-by:
-
Jon Mason authored
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by:
-
Jon Mason authored
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by:
-
Jon Mason authored
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by:
-
Jon Mason authored
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by:
-
Jon Mason authored
The PCIE capability offset is saved during PCI bus walking. Use the value from pci_dev instead of checking in the driver and saving it off the the driver specific structure. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. v2 of the patch re-adds the PCI_EXPRESS flag and adds comments describing why it is necessary. [ pdev->pcie_cap --> pci_pcie_cap(pdev) -DaveM ] Signed-off-by:
-
Kuninori Morimoto authored
This patch tidyup below warning ${LINUX}/drivers/net/sh_eth.c:1773: warning: 'mdp' may be used uninitialized in this function Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by:
-
Jesse Gross authored
This converts the vmxnet3 driver to use the new vlan model. In doing so it fixes missing tags in tcpdump and failure to do checksum offload when tx vlan offload is disabled. CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: VMware PV-Drivers <pv-drivers@vmware.com> Signed-off-by:
-
Mike Frysinger authored
Since we have a struct that defines the sizes of the registers, we don't need to explicitly use the 16bit read/write helpers. Let the code figure out which size access to make based on the size of the C type. There should be no functional changes here. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Acked-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
-
Mike Frysinger authored
If we look closely, the 4 writes to TRANSMIT_CHL.id1 can be collapsed down into much simpler code. So do just that. This also fixes a build failure due to the I/O macros no longer getting pulled in. Their minor (and accidental) usage here gets dropped as part of the unification. Signed-off-by:
Kurt Van Dijck <kurt.van.dijck@eia.be> Signed-off-by:
-
Sergei Shtylyov authored
Commit 725c8999 (mlx4_en: Reporting HW revision in ethtool -i) added code to read the revision ID from the PCI configuration register while it's already stored by PCI subsystem in the 'revision' field of 'struct pci_dev'... While at it, move the code being changed a bit in order to not break the initialization sequence. Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
- 27 Jun, 2011 5 commits
-
-
jamal authored
Results on dummy device can be seen in my netconf 2011 slides. These results are for a 10Gige IXGBE intel nic - on another i5 machine, very similar specs to the one used in the netconf2011 results. It turns out - this is a hell lot worse than dummy and so this patch is even more beneficial for 10G. Test setup: ---------- System under test sending packets out. Additional box connected directly dropping packets. Installed prio qdisc on the eth device and default netdev default length of 1000 used as is. The 3 prio bands each were set to 100 (didnt factor in the results). 5 packet runs were made and the middle 3 picked. results ------- The "cpu" column indicates the which cpu the sample was taken on, The "Pkt runx" carries the number of packets a cpu dequeued when forced to be in the "dequeuer" role. The "avg" for each run is the number of times each cpu should be a "dequeuer" if the system was fair. 3.0-rc4 (plain) cpu Pkt run1 Pkt run2 Pkt run3 ================================================ cpu0 21853354 21598183 22199900 cpu1 431058 473476 393159 cpu2 481975 477529 458466 cpu3 23261406 23412299 22894315 avg 11506948 11490372 11486460 3.0-rc4 with patch and default weight 64 cpu Pkt run1 Pkt run2 Pkt run3 ================================================ cpu0 13205312 13109359 13132333 cpu1 10189914 10159127 10122270 cpu2 10213871 10124367 10168722 cpu3 13165760 13164767 13096705 avg 11693714 11639405 11630008 As you can see the system is still not perfect but is a lot better than what it was before... At the moment we use the old backlog weight, weight_p which is 64 packets. It seems to be reasonably fine with that value. The system could be made more fair if we reduce the weight_p (as per my presentation), but we are going to affect the shared backlog weight. Unless deemed necessary, I think the default value is fine. If not we could add yet another knob. Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
David S. Miller authored
-
Joe Perches authored
Use pr_fmt, pr_<level> and netdev_<level> as appropriate. Signed-off-by:
-
Joe Perches authored
Use pr_fmt, pr_<level> and netdev_<level> as appropriate. Signed-off-by:
-
Joe Perches authored
Use pr_fmt, pr_<level> and netdev_<level> as appropriate. Signed-off-by:
-
