- 07 Jun, 2023 2 commits
-
-
Mark Brown authored
Merge series from Andi Shyti <andi.shyti@kernel.org>: Two small cleanups in the probe function. The first puts in use the managed spi master allocation while the second implements the dev_err_probe() function.
-
Abe Kohandel authored
Remove a misleading comment about the DMA operations of the Intel Mount Evans SoC's SPI Controller as requested by Serge. Signed-off-by:
Abe Kohandel <abe.kohandel@intel.com> Link: https://lore.kernel.org/linux-spi/20230606191333.247ucbf7h3tlooxf@mobilestation/ Fixes: 0760d5d0 ("spi: dw: Add compatible for Intel Mount Evans SoC") Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20230606231844.726272-1-abe.kohandel@intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 06 Jun, 2023 4 commits
-
-
Abe Kohandel authored
Document the DesignWare SSI controller compatible for Intel Mount Evans Integrated Management Complex SoC. Signed-off-by:
-
Abe Kohandel authored
The Intel Mount Evans SoC's Integrated Management Complex uses the SPI controller for access to a NOR SPI FLASH. However, the SoC doesn't provide a mechanism to override the native chip select signal. This driver doesn't use DMA for memory operations when a chip select override is not provided due to the native chip select timing behavior. As a result no DMA configuration is done for the controller and this configuration is not tested. The controller also has an errata where a full TX FIFO can result in data corruption. The suggested workaround is to never completely fill the FIFO. The TX FIFO has a size of 32 so the fifo_len is set to 31. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230606145402.474866-2-abe.kohandel@intel.comSigned-off-by:
-
Andi Shyti authored
Simplify the code by using dev_err_probe() instead of dev_err() and 'return'. Signed-off-by:
Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20230606012051.2139333-3-andi.shyti@kernel.orgSigned-off-by:
-
Andi Shyti authored
Use devm_spi_alloc_master() and get rid of one goto error path Signed-off-by:
-
- 02 Jun, 2023 2 commits
-
-
Mårten Lindahl authored
When the spi controller is registered and the cs_gpiods cannot be assigned, causing a defer of the probe, there is an error print saying: "probe - problem registering spi master" This should not be announced as an error. Print this message for all errors except for the probe defer. Signed-off-by:
Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20230602-pl022-defer-fix-v2-1-383f6bc2293a@axis.comSigned-off-by:
-
Rasmus Villemoes authored
Commit 87c61417 (spi: spi-imx: fix MX51_ECSPI_* macros when cs > 3) ensured that the argument passed to the macros was masked with &3, so that we no longer write outside the intended fields in the various control registers. When all chip selects are gpios, this works just fine. However, when a mix of native and gpio chip selects are in use, that masking is too naive. Say, for example, that SS0 is muxed as native chip select, and there is also a chip at 4 (obviously with a gpio cs). In that case, when accessing the latter chip, both the SS0 pin and the gpio pin will be asserted low. The fix for this is to use the ->unused_native_cs value as channel number for any spi device which uses a gpio as chip select. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20230602115731.708883-1-linux@rasmusvillemoes.dkSigned-off-by:
-
- 01 Jun, 2023 4 commits
-
-
Andi Shyti authored
Replace the tuple devm_clk_get()/clk_prepare_enable() with the single function devm_clk_get_enabled(). Signed-off-by:
-
Krzysztof Kozlowski authored
Remove address/size-cells because they are already mentioned by common spi-controller.yaml. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230601095908.563865-3-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Remove cs-gpios because it is already mentioned by common spi-controller.yaml. Signed-off-by:
-
Krzysztof Kozlowski authored
Remove properties already mentioned by common spi-controller.yaml and switch to unevaluatedProperties:false to achieve same functional effect. This makes the binding a bit smaller. Similarly there is no need to allow additionalProperties for children, because spi-controller.yaml already does it. Signed-off-by:
-
- 31 May, 2023 2 commits
-
-
Serge Semin authored
Just drop a redundant empty line from the dw_spi_debugfs_init() function left in the framework of the commit 0178f1e5 ("spi-dw-core.c: Fix error checking for debugfs_create_dir") after removing the last return statement. Signed-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20230530221725.26319-1-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
Alexander Stein authored
Having no DMA is not an error. The simplest reason is not having it configured. SPI will still be usable, so raise a warning instead to get still some attention. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230531072850.739021-1-alexander.stein@ew.tq-group.comSigned-off-by:
-
- 30 May, 2023 18 commits
-
-
Douglas Anderson authored
A warning added in commit b5762d95 ("spi: spi-qcom-qspi: Add DMA mode support") was missing a newline. Add it. Reported-by:
Stephen Boyd <swboyd@chromium.org> Closes: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/4573857/comment/44331d65_79128099/ Fixes: b5762d95 ("spi: spi-qcom-qspi: Add DMA mode support") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230530111348.1.Ibd1f4827e18a26dc802cd6e5ac300d83dc1bc41c@changeidSigned-off-by:
-
Krzysztof Kozlowski authored
Make the pattern matching node names a bit stricter to improve DTS consistency. The pattern is restricted to: 1. Only one unit address or one -N suffix, 2. -N suffixes to decimal numbers. Suggested-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Mark Brown authored
Get the fixes into CI for development.
-
Mark Brown authored
Merge series from Boerge Struempfel <boerge.struempfel@gmail.com>: Some spi controller switch the mosi line to high, whenever they are idle. This may not be desired in all use cases. For example neopixel leds can get confused and flicker due to misinterpreting the idle state. Therefore, we introduce a new spi-mode bit, with which the idle behaviour can be overwritten on a per device basis.
-
Mark Brown authored
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>: Hello, compared to (implicit) v1 sent in March with Message-Id: <20230309094704.2568531-1-u.kleine-koenig@pengutronix.de>, I reworked patch 1 on feedback by AngeloGioacchino Del Regno. Patches 2 and 3 got his Reviewed-by. Best regards Uwe Uwe Kleine-König (3): spi: mt65xx: Properly handle failures in .remove() spi: mt65xx: Convert to platform remove callback returning void spi: mt65xx: Don't disguise a "return 0" as "return ret" drivers/spi/spi-mt65xx.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) base-commit: ac9a7868 -- 2.39.2
-
Boerge Struempfel authored
Added the three missing spi mode bits SPI_3WIRE_HIZ, SPI_RX_CPHA_FLIP, and SPI_MOSI_IDLE_LOW. Signed-off-by:
Boerge Struempfel <boerge.struempfel@gmail.com> Link: https://lore.kernel.org/r/20230530141641.1155691-6-boerge.struempfel@gmail.comSigned-off-by:
-
Boerge Struempfel authored
In order to increase usability, the command line options are sorted into logical groups. In addition, the usage string was sorted alphabetically, and the missing parameters '8','i' and 'o' were added. Furthermore, the option descriptions were moved further to the right, in order to allow for longer option names. Signed-off-by:
-
Boerge Struempfel authored
Allow userspace to set SPI_MOSI_IDLE_LOW and the SPI_3WIRE_HIZ mode bit using the SPI_IOC_WR_MODE32 ioctl. Signed-off-by:
-
Boerge Struempfel authored
By default, the spi-imx controller pulls the mosi line high, whenever it is idle. This behaviour can be inverted per CS by setting the corresponding DATA_CTL bit in the config register of the controller. Also, since the controller mode-bits have to be touched anyways, the SPI_CPOL and SPI_CPHA are replaced by the combined SPI_MODE_X_MASK flag. Signed-off-by:
-
Boerge Struempfel authored
Some spi controller switch the mosi line to high, whenever they are idle. This may not be desired in all use cases. For example neopixel leds can get confused and flicker due to misinterpreting the idle state. Therefore, we introduce a new spi-mode bit, with which the idle behaviour can be overwritten on a per device basis. Signed-off-by:
-
Osama Muhammad authored
This patch fixes the error checking in spi-dw-core.c in debugfs_create_dir. The DebugFS kernel API is developed in a way that the caller can safely ignore the errors that occur during the creation of DebugFS nodes. Signed-off-by:
Osama Muhammad <osmtendev@gmail.com> Link: https://lore.kernel.org/r/20230520224025.14928-1-osmtendev@gmail.comSigned-off-by:
-
Lars-Peter Clausen authored
The `width_available` array is currently placed on the `f_ospi_supports_op_width()` function's stack. But the array is never modified. Make it `static const`. This makes the code slightly smaller and more efficient. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230528195830.164669-3-lars@metafoo.deSigned-off-by:
-
Lars-Peter Clausen authored
Use `min_t` instead of `min` with casting the individual arguments. Signed-off-by:
-
Lars-Peter Clausen authored
Replace the combination of devm_clk_get_enable() plus clk_prepare_enable() with devm_clk_get_enabled(). Slightly reduces the amount of boilerplate code. Signed-off-by:
-
Uwe Kleine-König authored
Because of the earlier if (ret) return ret; ret is always zero at the end of mtk_spi_suspend(). Write it as explicit return 0 for slightly improved clearness. Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230530081648.2199419-4-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Reviewed-by:
-
Uwe Kleine-König authored
Returning an error code in a platform driver's remove function is wrong most of the time and there is an effort to make the callback return void. To prepare this rework the function not to exit early. There wasn't a real problem because if pm runtime resume failed the only step missing was pm_runtime_disable() which isn't an issue. Signed-off-by:
-
Stephan Gerhold authored
It is usually better to request all necessary resources (clocks, regulators, ...) before starting to make use of them. That way they do not change state in case one of the resources is not available yet and probe deferral (-EPROBE_DEFER) is necessary. This is particularly important for DMA channels and IOMMUs which are not enforced by fw_devlink yet (unless you use fw_devlink.strict=1). spi-qup does this in the wrong order, the clocks are enabled and disabled again when the DMA channels are not available yet. This causes issues in some cases: On most SoCs one of the SPI QUP clocks is shared with the UART controller. When using earlycon UART is actively used during boot but might not have probed yet, usually for the same reason (waiting for the DMA controller). In this case, the brief enable/disable cycle ends up gating the clock and further UART console output will halt the system completely. Avoid this by requesting the DMA channels before changing the clock state. Fixes: 612762e8 ("spi: qup: Add DMA capabilities") Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20230518-spi-qup-clk-defer-v1-1-f49fc9ca4e02@gerhold.netSigned-off-by:
-
- 26 May, 2023 1 commit
-
-
Uwe Kleine-König authored
After commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f4 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by:
-
- 25 May, 2023 1 commit
-
-
Qii Wang authored
this patch advertise the availability of Dual and Quad SPI mode for ipm design. Signed-off-by:
Qii Wang <qii.wang@mediatek.com> Signed-off-by:
Tim.Kuo <Tim.kuo@mediatek.com> Link: https://lore.kernel.org/r/20230523112608.10298-1-qii.wang@mediatek.comSigned-off-by:
-
- 24 May, 2023 1 commit
-
-
Mark Brown authored
Merge up v6.4-rc3 in order to get fixes to improve the stability of my CI.
-
- 23 May, 2023 5 commits
-
-
Daniel Golle authored
When unloading the spi-mt65xx kernel module during an ongoing spi-mem operation the kernel will Oops shortly after unloading the module. This is because wait_for_completion_timeout was still running and returning into the no longer loaded module: Internal error: Oops: 0000000096000005 [#1] SMP Modules linked in: [many, but spi-mt65xx is no longer there] CPU: 0 PID: 2578 Comm: block Tainted: G W O 6.3.0-next-20230428+ #0 Hardware name: Bananapi BPI-R3 (DT) pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __lock_acquire+0x18c/0x20e8 lr : __lock_acquire+0x9b8/0x20e8 sp : ffffffc009ec3400 x29: ffffffc009ec3400 x28: 0000000000000001 x27: 0000000000000004 x26: ffffff80082888c8 x25: 0000000000000000 x24: 0000000000000000 x23: ffffffc009609da8 x22: ffffff8008288000 x21: ffffff8008288968 x20: 00000000000003c2 x19: ffffff8008be7990 x18: 00000000000002af x17: 0000000000000000 x16: 0000000000000000 x15: ffffffc008d78970 x14: 000000000000080d x13: 00000000000002af x12: 00000000ffffffea x11: 00000000ffffefff x10: ffffffc008dd0970 x9 : ffffffc008d78918 x8 : 0000000000017fe8 x7 : 0000000000000001 x6 : 0000000000000000 x5 : ffffff807fb53910 x4 : 0000000000000000 x3 : 0000000000000027 x2 : 0000000000000027 x1 : 0000000000000000 x0 : 00000000000c03c2 Call trace: __lock_acquire+0x18c/0x20e8 lock_acquire+0x100/0x2a4 _raw_spin_lock_irq+0x58/0x74 __wait_for_common+0xe0/0x1b4 wait_for_completion_timeout+0x1c/0x24 0xffffffc000acc8a4 <--- used to be mtk_spi_transfer_wait spi_mem_exec_op+0x390/0x3ec spi_mem_no_dirmap_read+0x6c/0x88 spi_mem_dirmap_read+0xcc/0x12c spinand_read_page+0xf8/0x1dc spinand_mtd_read+0x1b4/0x2fc mtd_read_oob_std+0x58/0x7c mtd_read_oob+0x8c/0x148 mtd_read+0x50/0x6c ... Prevent this by completing in mtk_spi_remove if needed. Fixes: 9f763fd2 ("spi: mediatek: add spi memory support for ipm design") Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/ZFAF6pJxMu1z6k4w@makrotopia.orgSigned-off-by:
-
Clark Wang authored
When all bits of IER are set to 0, we still can observe the lpspi irq events when using DMA mode to transfer data. So disable irq to avoid the too much irq events. Signed-off-by:
Clark Wang <xiaoning.wang@nxp.com> Link: https://lore.kernel.org/r/20230505063557.3962220-1-xiaoning.wang@nxp.comSigned-off-by:
-
Rasmus Villemoes authored
The ecspi IP block on imx51/imx53/imx6 have four native chip selects. Tell that to the spi core so that any non-gpio chip selects get validated against that upper bound. Also set the SPI_MASTER_GPIO_SS so that the core verifies that, in the case where both native and gpio chip selects are in use, there is at least one leftover native chip select (or "channel", in the ecspi language) for use by the slaves sitting on gpio chip selects. Signed-off-by:
-
Rasmus Villemoes authored
Near the top of the function, spi_imx->controller is set to controller (and is of course never modified again). The rest of the function uses a mix of the two expressions. For consistency, readability and better code generation, drop all the spi_imx-> indirections. Signed-off-by:
-
Charles Keepax authored
Add the missing kernel documentation to silence the build warning. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230523090124.3132-1-ckeepax@opensource.cirrus.comSigned-off-by:
-
