- 14 Sep, 2022 4 commits
-
-
Yifan Zhang authored
there is only one SDMA engine in SDMA 6.0.1, the sdma_hqd_mask has to be zeroed for the 2nd engine, otherwise MES scheduler will consider 2nd engine exists and map/unmap SDMA queues to the non-existent engine. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
Tim Huang <Tim.Huang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Move common IP init before GMC init so that HDP gets remapped before GMC init which uses it. This fixes the Unsupported Request error reported through AER during driver load. The error happens as a write happens to the remap offset before real remapping is done. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Alex Deucher authored
This mirrors what we do for other asics and this way we are sure the sdma doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. However, the statement says that it applies to multimedia as well, but the VCN code currently initializes doorbells after GFX and there are no known issues there. In my testing at least I don't see any problems on SDMA. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by:
-
Alex Deucher authored
This mirrors what we do for other asics and this way we are sure the ih doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. In this case IH is initialized before GFX, so there should be no issue. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by:
-
- 13 Sep, 2022 26 commits
-
-
Nathan Chancellor authored
This function consumes a lot of stack space and it blows up the size of dml30_ModeSupportAndSystemConfigurationFull() with clang: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3542:6: error: stack frame size (2200) exceeds limit (2048) in 'dml30_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Commit a0f7e7f7 ("drm/amd/display: fix i386 frame size warning") aimed to address this for i386 but it did not help x86_64. To reduce the amount of stack space that dml30_ModeSupportAndSystemConfigurationFull() uses, mark UseMinimumDCFCLK() as noinline, using the _for_stack variant for documentation. While this will increase the total amount of stack usage between the two functions (1632 and 1304 bytes respectively), it will make sure both stay below the limit of 2048 bytes for these files. The aforementioned change does help reduce UseMinimumDCFCLK()'s stack usage so it should not be reverted in favor of this change. Link: https://github.com/ClangBuiltLinux/linux/issues/1681Reported-by:"Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com> Tested-by:
Maíra Canal <mairacanal@riseup.net> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
Nathan Chancellor authored
Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml31_ModeSupportAndSystemConfigurationFull() uses by 112 bytes with LLVM 16 (1976 -> 1864), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3908:6: error: stack frame size (2216) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Link: https://github.com/ClangBuiltLinux/linux/issues/1681Reported-by: -
Nathan Chancellor authored
drm/amd/display: Reduce number of arguments of dml31's CalculateWatermarksAndDRAMSpeedChangeSupport() Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml31_ModeSupportAndSystemConfigurationFull() uses by 240 bytes with LLVM 16 (2216 -> 1976), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3908:6: error: stack frame size (2216) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Link: https://github.com/ClangBuiltLinux/linux/issues/1681Reported-by: -
Nathan Chancellor authored
Several of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml32_ModeSupportAndSystemConfigurationFull() uses by 208 bytes with LLVM 16 (1936 -> 1728), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1721:6: error: stack frame size (2152) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Additionally, while modifying the arguments to dml32_CalculatePrefetchSchedule(), use 'v' consistently, instead of 'v' mixed with 'mode_lib->vba'. Link: https://github.com/ClangBuiltLinux/linux/issues/1681Reported-by: -
Nathan Chancellor authored
drm/amd/display: Reduce number of arguments of dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport() Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer created at the top of dml32_ModeSupportAndSystemConfigurationFull(). This reduces the total amount of stack space that dml32_ModeSupportAndSystemConfigurationFull() uses by 216 bytes with LLVM 16 (2152 -> 1936), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1721:6: error: stack frame size (2152) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Additionally, while modifying the arguments to dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport(), use 'v' consistently, instead of 'v' mixed with 'mode_lib->vba'. Link: https://github.com/ClangBuiltLinux/linux/issues/1681Reported-by: -
Alvin Lee authored
Refactor calculation to remove floating point operations from dmub_srv. To ensure that 32-bit compilation works well, we use the div64 family of macros to do integer division for SubVP-related timing parameters. Cc: Maíra Canal <mairacanal@riseup.net> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Isabella Basso <isabbasso@riseup.net> Cc: Magali Lemes <magalilemes00@gmail.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Samson Tam <Samson.Tam@amd.com> Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Alvin Lee <alvin.lee2@amd.com> Co-developed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Yao Wang1 authored
[Why] For HDR mode, we get total 512 tf_point and after switching to SDR mode we actually get 400 tf_point and the rest of points(401~512) still use dirty value from HDR mode. We should limit the rest of the points to max value. [How] Limit the value when coordinates_x.x > 1, just like what we do in translate_from_linear_space for other re-gamma build paths. Tested-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by:
Yao Wang1 <Yao.Wang1@amd.com> Signed-off-by:
-
Aurabindo Pillai authored
[Why&How] Kernel does not have a means to tell the userspace to use software cursor. Due to lack of this functionality, reducing the max cursor size is the only way to ensure that power savings of Subview port feature is utilized for asics that support it. The workaround could be removed after cursor caching is fixed while a subviewport config is active. Tested-by:
-
Alvin Lee authored
[Description] Leverage SW cursor fall back for SubVP when the cursor is too big. We want to take advantage of being able to fallback to SW cursor when possible because it's not worth it to disable MCLK switching because the cursor is slightly too big. Tested-by:
-
Taimur Hassan authored
[Why & How] When calculating cursor size for MALL allocation, the cursor width should be the actual width rounded up to 64 alignment. Additionally, the bit depth should vary depending on color format. Tested-by:
Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by:
-
Duncan Ma authored
[Why] The interpretation of the number of memory channels differ by memory type, and this affects channel width for the DML input. [How] Set dram channel width according to memory type for dcn314. Tested-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Duncan Ma <duncan.ma@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] HW can support the display swizzle modes for video, and those are preferable over standard or linear for decode use. [How] Remove the check for DCN314. Tested-by:
-
Nicholas Kazlauskas authored
[Why & How] Add support for the DML314 functions and hook up DCN314 to use them. This has some necessary additions for calculating Max VSTARTUP for future features, but there's also some changes that we have to make for pixel format/swizzle support. That will come in a following patch to make this transition easier to bisect. Tested-by:
-
Rodrigo Siqueira authored
We were not using the VBA and DLG files for DCN314, but the next sequence of changes for DCN314 will require those files. This commit adds the necessary files to the Makefile. Cc: Roman Li <roman.li@amd.com> Tested-by:
-
Rodrigo Siqueira authored
We have some compilation errors in some DML files from DCN314 that we never noticed because we were not compiling some of the DML files. This commit fixes those syntax errors before we enable the compilation. Cc: Roman Li <roman.li@amd.com> Tested-by:
-
Aric Cyr authored
[why] Incorrectly using MicroTileWidth instead of MacroTileWidth for calculations. [how] Remove all unused references to MicroTile and change them to MacroTile. Tested-by:
-
Leo Chen authored
[Why & How] DIG_FIFO_READ_START_LEVEL should only be set to default value (7) by software. Removed all instances of resetting the register to 0 Tested-by:
Leo Chen <sancchen@amd.com> Signed-off-by:
-
Alvin Lee authored
[Description] Update MBLK calculation according to hardware doc. For DCC case we were not allocation enough MALL due to an inaccurate MBLK calculation. Tested-by:
-
Aurabindo Pillai authored
This reverts commit a4f1b042 since returning false in case of SubVP results in no cursor being visible on desktop as there is no sw cursor fallback path on all platforms. Tested-by:
-
Candice Li authored
No need to reset error status since only umc ras supported on psp v13_0_0. Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Alex Deucher authored
Was missing before and would have resulted in a write to a non-existant register. Normally APUs don't use HDP, but other asics could use this code and APUs do use the HDP when used in passthrough. Reviewed-by:
-
Yang Wang authored
align TMR BO size TO tmr size is not necessary, modify the size to 1M to avoid re-create BO fail when serious VRAM fragmentation. v2: add new macro PSP_TMR_ALIGNMENT for TMR BO alignment size Signed-off-by:
Yang Wang <KevinYang.Wang@amd.com> Reviewed-by:
-
Candice Li authored
Enable full reset for RAS supported configuration on gc v11_0_0. v2: simplify the code. Signed-off-by:
-
Hamza Mahfooz authored
Currently, we aren't handling DRM_IOCTL_MODE_DIRTYFB. So, use drm_atomic_helper_dirtyfb() as the dirty callback in the amdgpu_fb_funcs struct. Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by:
-
Lijo Lazar authored
As per PCIE Base Spec r4.0 Section 6.18 'Software must not enable LTR in an Endpoint unless the Root Complex and all intermediate Switches indicate support for LTR.' This fixes the Unsupported Request error reported through AER during ASPM enablement. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216455 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Reported-by:
Gustaw Smolarczyk <wielkiegie@gmail.com> Signed-off-by:
-
Guchun Chen authored
To avoid hardware intermittent failures. Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
-
- 09 Sep, 2022 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2022-09-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix MIPI sequence block copy from BIOS' table. (Ville) - Fix PCODE min freq setup when GuC's SLPC is in use. (Rodrigo) - Implement Workaround for eDP. (Ville) - Fix has_flat_ccs selection for DG1. (Matt) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Yxn1WpmUJnJpqq23@intel.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
Short summary of fixes pull: * edid: Fix EDID 1.4 range-descriptor parsing * panfrost: Fix devfreq OPP * ttm: Fix ghost-object bulk moves Signed-off-by:
-
- 08 Sep, 2022 8 commits
-
-
Clément Péron authored
Enabling panfrost GPU OPP with dynamic regulator will make OPP responsible to enable and configure it. Unfortunately OPP configure and enable the regulator when an OPP is asked to be set, which is not the case during panfrost_devfreq_init(). This leave the regulator unconfigured and if no GPU load is triggered, no OPP is asked to be set which make the regulator framework switching it off during regulator_late_cleanup() without noticing and therefore make the board hang as any access to GPU memory space make bus locks up. Call dev_pm_opp_set_opp() with the recommend OPP in panfrost_devfreq_init() to enable the regulator, this will properly configure and enable the regulator and will avoid any switch off by regulator_late_cleanup(). Suggested-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Clément Péron <peron.clem@gmail.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Christian König authored
Otherwise lockdep will complain about cleaning up the bulk_move. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907100051.570641-1-christian.koenig@amd.com Fixes: d91c411c ("drm/ttm: update bulk move object of ghost BO")
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.0-2022-09-07' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.0-2022-09-07: amdgpu: - Firmware header fix - SMU 13.x fix - Debugfs memory leak fix - NBIO 7.7 fix - Firmware memory leak fix amdkfd: - Debug output fix Signed-off-by:
-
Guchun Chen authored
It's missed in psp fini. Signed-off-by:
-
Yifan Zhang authored
current function mixes CSDMA_DOORBELL_RANGE and SDMA0_DOORBELL_RANGE range/size manipulation, while these 2 registers have difference size field mask. Remove range/size manipulation for SDMA0_DOORBELL_RANGE. Signed-off-by:
Xiaojian Du <Xiaojian.Du@amd.com> Signed-off-by:
-
Yifan Zhang authored
Addresses should be printed in hex format. Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. Fix this up by properly calling dput(). Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: hersen wu <hersenxs.wu@amd.com> Cc: Wenjing Liu <wenjing.liu@amd.com> Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Thelford Williams <tdwilliamsiv@gmail.com> Cc: Fangzhi Zuo <Jerry.Zuo@amd.com> Cc: Yongzhi Liu <lyz_cs@pku.edu.cn> Cc: Mikita Lipski <mikita.lipski@amd.com> Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Evan Quan authored
Missing SetMGpuFanBoostLimitRpm mapping leads to loading failure for SMU 13.0.7. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
