Building BPF selftests out of srctree fails with:

  make: *** No rule to make target '/linux-build//ima_setup.sh', needed by 'ima_setup.sh'.  Stop.

The culprit is the rule that defines convenient shorthands like
"make test_progs", which builds $(OUTPUT)/test_progs. These shorthands
make sense only for binaries that are built though; scripts that live
in the source tree do not end up in $(OUTPUT).

Therefore drop $(TEST_PROGS) and $(TEST_PROGS_EXTENDED) from the rule.

The issue exists for a while, but it became a problem only after commit
d68ae498 ("selftests/bpf: Install all required files to run selftests"),
which added dependencies on these scripts.

Fixes: 03dcb784 ("selftests/bpf: Add simple per-test targets to Makefile")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230208231211.283606-1-iii@linux.ibm.com

v1.25 of pahole supports filtering out functions with multiple inconsistent
function prototypes or optimized-out parameters from the BTF representation.
These present problems because there is no additional info in BTF saying which
inconsistent prototype matches which function instance to help guide attachment,
and functions with optimized-out parameters can lead to incorrect assumptions
about register contents.

So for now, filter out such functions while adding BTF representations for
functions that have "."-suffixes (foo.isra.0) but not optimized-out parameters.
This patch assumes that below linked changes land in pahole for v1.25.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/1675790102-23037-1-git-send-email-alan.maguire@oracle.com
Link: https://lore.kernel.org/bpf/1675949331-27935-1-git-send-email-alan.maguire@oracle.com

Yafang Shao says:

====================

The bpf memory accouting has some known problems in contianer
environment,

- The container memory usage is not consistent if there's pinned bpf
  program
  After the container restart, the leftover bpf programs won't account
  to the new generation, so the memory usage of the container is not
  consistent. This issue can be resolved by introducing selectable
  memcg, but we don't have an agreement on the solution yet. See also
  the discussions at https://lwn.net/Articles/905150/ .

- The leftover non-preallocated bpf map can't be limited
  The leftover bpf map will be reparented, and thus it will be limited by
  the parent, rather than the container itself. Furthermore, if the
  parent is destroyed, it be will limited by its parent's parent, and so
  on. It can also be resolved by introducing selectable memcg.

- The memory dynamically allocated in bpf prog is charged into root memcg
  only
  Nowdays the bpf prog can dynamically allocate memory, for example via
  bpf_obj_new(), but it only allocate from the global bpf_mem_alloc
  pool, so it will charge into root memcg only. That needs to be
  addressed by a new proposal.

So let's give the container user an option to disable bpf memory accouting.

The idea of "cgroup.memory=nobpf" is originally by Tejun[1].

[1]. https://lwn.net/ml/linux-mm/YxjOawzlgE458ezL@slm.duckdns.org/

Changes,
v1->v2:
- squash patches (Roman)
- commit log improvement in patch #2. (Johannes)
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

We can simply disable the bpf prog memory accouting by not setting the
GFP_ACCOUNT.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lore.kernel.org/r/20230210154734.4416-5-laoar.shao@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

We can simply set root memcg as the map's memcg to disable bpf memory
accounting. bpf_map_area_alloc is a little special as it gets the memcg
from current rather than from the map, so we need to disable GFP_ACCOUNT
specifically for it.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lore.kernel.org/r/20230210154734.4416-4-laoar.shao@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Introduce new helper bpf_map_kvcalloc() for the memory allocation in
bpf_local_storage(). Then the allocation will charge the memory from the
map instead of from current, though currently they are the same thing as
it is only used in map creation path now. By charging map's memory into
the memcg from the map, it will be more clear.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lore.kernel.org/r/20230210154734.4416-3-laoar.shao@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Add new kernel parameter cgroup.memory=nobpf to allow user disable bpf
memory accounting. This is a preparation for the followup patch.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Link: https://lore.kernel.org/r/20230210154734.4416-2-laoar.shao@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Given BPF is increasingly being used beyond just the Linux kernel, with
implementations in NICs and other hardware, Windows, etc, there is an
ongoing effort to document and standardize parts of the existing BPF
infrastructure such as its ISA. As "source of truth" we decided some
time ago to rely on the in-tree documentation, in particular, starting
out with the Documentation/bpf/instruction-set.rst as a base for later
RFC drafts on the ISA. Therefore, we want to ensure that changes to that
document have bpf@ietf.org in Cc, so add a MAINTAINERS file entry with
a section on documents related to standardization efforts. For now, this
only relates to instruction-set.rst, and later additional files will be
added.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Thaler <dthaler@microsoft.com>
Cc: bpf@ietf.org
Link: https://datatracker.ietf.org/doc/bofreq-thaler-bpf-ebpf/
Link: https://lore.kernel.org/r/57619c0dd8e354d82bf38745f99405e3babdc970.1676068387.git.daniel@iogearbox.netSigned-off-by: Alexei Starovoitov <ast@kernel.org>

====================
pull-request: bpf-next 2023-02-11

We've added 96 non-merge commits during the last 14 day(s) which contain
a total of 152 files changed, 4884 insertions(+), 962 deletions(-).

There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c
between commit 5b246e53 ("ice: split probe into smaller functions")
from the net-next tree and commit 66c0e13a ("drivers: net: turn on
XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev()
is otherwise there a 2nd time, and add XDP features to the existing
ice_cfg_netdev() one:

        [...]
        ice_set_netdev_features(netdev);
        netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
                               NETDEV_XDP_ACT_XSK_ZEROCOPY;
        ice_set_ops(netdev);
        [...]

Stephen's merge conflict mail:
https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/

The main changes are:

1) Add support for BPF trampoline on s390x which finally allows to remove many
   test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich.

2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski.

3) Add capability to export the XDP features supported by the NIC.
   Along with that, add a XDP compliance test tool,
   from Lorenzo Bianconi & Marek Majtyka.

4) Add __bpf_kfunc tag for marking kernel functions as kfuncs,
   from David Vernet.

5) Add a deep dive documentation about the verifier's register
   liveness tracking algorithm, from Eduard Zingerman.

6) Fix and follow-up cleanups for resolve_btfids to be compiled
   as a host program to avoid cross compile issues,
   from Jiri Olsa & Ian Rogers.

7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted
   when testing on different NICs, from Jesper Dangaard Brouer.

8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang.

9) Extend libbpf to add an option for when the perf buffer should
   wake up, from Jon Doron.

10) Follow-up fix on xdp_metadata selftest to just consume on TX
    completion, from Stanislav Fomichev.

11) Extend the kfuncs.rst document with description on kfunc
    lifecycle & stability expectations, from David Vernet.

12) Fix bpftool prog profile to skip attaching to offline CPUs,
    from Tonghao Zhang.

====================

Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Correct spelling problems for Documentation/isdn/ as reported
by codespell.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230209071400.31476-9-rdunlap@infradead.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Xin Long says:

====================
net: move more duplicate code of ovs and tc conntrack into nf_conntrack_ovs

We've moved some duplicate code into nf_nat_ovs in:

  "net: eliminate the duplicate code in the ct nat functions of ovs and tc"

This patchset addresses more code duplication in the conntrack of ovs
and tc then creates nf_conntrack_ovs for them, and four functions will
be extracted and moved into it:

  nf_ct_handle_fragments()
  nf_ct_skb_network_trim()
  nf_ct_helper()
  nf_ct_add_helper()
====================

Link: https://lore.kernel.org/r/cover.1675810210.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Now handle_fragments() in OVS and TC have the similar code, and
this patch removes the duplicate code by moving the function
to nf_conntrack_ovs.

Note that skb_clear_hash(skb) or skb->ignore_df = 1 should be
done only when defrag returns 0, as it does in other places
in kernel.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch has no functional changes and just moves frag check and
tc_skb_cb update out of handle_fragments, to make it easier to move
the duplicate code from handle_fragments() into nf_conntrack_ovs later.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This patch has no functional changes and just moves key and ovs_cb update
out of handle_fragments, and skb_clear_hash() and skb->ignore_df change
into handle_fragments(), to make it easier to move the duplicate code
from handle_fragments() into nf_conntrack_ovs later.

Note that it changes to pass info->family to handle_fragments() instead
of key for the packet type check, as info->family is set according to
key->eth.type in ovs_ct_copy_action() when creating the action.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There are almost the same code in ovs_skb_network_trim() and
tcf_ct_skb_network_trim(), this patch extracts them into a function
nf_ct_skb_network_trim() and moves the function to nf_conntrack_ovs.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Similar to nf_nat_ovs created by Commit ebddb140 ("net: move the
nat function to nf_nat_ovs for ovs and tc"), this patch is to create
nf_conntrack_ovs to get these functions shared by OVS and TC only.

There are nf_ct_helper() and nf_ct_add_helper() from nf_conntrak_helper
in this patch, and will be more in the following patches.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The code assumes that everything that comes after nlmsgerr are nlattrs.
When calculating their size, it does not account for the initial
nlmsghdr. This may lead to accessing uninitialized memory.

Fixes: bbf48c18 ("libbpf: add error reporting in XDP")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-8-iii@linux.ibm.com

malloc() and free() may be completely replaced by sanitizers, use
fopen() and fclose() instead.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-7-iii@linux.ibm.com

malloc() and free() may be completely replaced by sanitizers, use
fopen() and fclose() instead.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-6-iii@linux.ibm.com

To get useful results from the Memory Sanitizer, all code running in a
process needs to be instrumented. When building tests with other
sanitizers, it's not strictly necessary, but is also helpful.
So make sure runqslower and libbpf are compiled with SAN_CFLAGS and
linked with SAN_LDFLAGS.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-5-iii@linux.ibm.com

Memory Sanitizer requires passing different options to CFLAGS and
LDFLAGS: besides the mandatory -fsanitize=memory, one needs to pass
header and library paths, and passing -L to a compilation step
triggers -Wunused-command-line-argument. So introduce a separate
variable for linker flags. Use $(SAN_CFLAGS) as a default in order to
avoid complicating the ASan usage.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-4-iii@linux.ibm.com

This makes it possible to add sanitizer flags.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-3-iii@linux.ibm.com

Using HOSTCC="ccache clang" breaks building the tests, since, when it's
forwarded to e.g. bpftool, the child make sees HOSTCC=ccache and
"clang" is considered a target. Fix by quoting it, and also HOSTLD and
HOSTAR for consistency.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230210001210.395194-2-iii@linux.ibm.com

skbuff_head_cache is misnamed (perhaps for historical reasons?)
because it does not hold heads. Head is the buffer which skb->data
points to, and also where shinfo lives. struct sk_buff is a metadata
structure, not the head.

Eric recently added skb_small_head_cache (which allocates actual
head buffers), let that serve as an excuse to finally clean this up :)

Leave the user-space visible name intact, it could possibly be uAPI.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: prepare for GSI register updtaes

An upcoming series (or two) will convert the definitions of GSI
registers used by IPA so they use the "IPA reg" mechanism to specify
register offsets and their fields.  This will simplify implementing
the fairly large number of changes required in GSI registers to
support more than 32 GSI channels (introduced in IPA v5.0).

A few minor problems and inconsistencies were found, and they're
fixed here.  The last three patches in this series change the
"ipa_reg" code to separate the IPA-specific part (the base virtual
address, basically) from the generic register part, and the now-
generic code is renamed to use just "reg_" or "REG_" as a prefix
rather than "ipa_reg" or "IPA_REG_".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename functions related to register fields so they don't appear to
be IPA-specific, and move their definitions into "reg.h":
    ipa_reg_fmask()	-> reg_fmask()
    ipa_reg_bit()	-> reg_bit()
    ipa_reg_field_max()	-> reg_field_max()
    ipa_reg_encode()	-> reg_encode()
    ipa_reg_decode()	-> reg_decode()
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename ipa_reg_offset() to be reg_offset() and move its definition
to "reg.h".  Rename ipa_reg_n_offset() to be reg_n_offset() also.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPA register definitions have evolved with each new version.  The
changes required to support more than 32 endpoints in IPA v5.0 made
it best to define a unified mechanism for defining registers and
their fields.

GSI register definitions, meanwhile, have remained fairly stable.
And even as the total number of IPA endpoints goes beyond 32, the
number of GSI channels on a given EE that underly endpoints still
remains 32 or less.

Despite that, GSI v3.0 (which is used with IPA v5.0) extends the
number of channels (and events) it supports to be about 256, and as
a result, many GSI register definitions must change significantly.
To address this, we'll use the same "ipa_reg" mechanism to define
the GSI registers.

As a first step in generalizing the "ipa_reg" to also support GSI
registers, isolate the definitions of the "ipa_reg" and "ipa_regs"
structure types (and some supporting macros) into a new header file,
and remove the "ipa_" and "IPA_" from symbol names.

Separate the IPA register ID validity checking from the generic
check that a register ID is in range.  Aside from that, this is
intended to have no functional effect on the code.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move some static inline function definitions out of "gsi_reg.h" and
into "gsi.c", which is the only place they're used.  Rename them so
their names identify the register they're associated with.

Move the gsi_channel_type enumerated type definition below the
offset and field definitions for the CH_C_CNTXT_0 register where
it's used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are seven GSI interrupt types that can be signaled by a single
GSI IRQ.  These are represented in a bitmask, and the gsi_irq_type_id
enumerated type defines what each bit position represents.

Similarly, the global and general GSI interrupt types each has a set
of conditions it signals, and both types have an enumerated type
that defines which bit that represents each condition.

When used, these enumerated values are passed as an argument to BIT()
in *all* cases.  So clean up the code a little bit by defining the
enumerated type values as one-bit masks rather than bit positions.

Rename gsi_general_id to be gsi_general_irq_id for consistency.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When checking the validity of an IPA register ID, compare it against
all possible ipa_reg_id values.

Rename the function ipa_reg_id_valid() to be specific about what's
being checked.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Soon IPA v5.0+ will be supported, and when that happens we will be
able to enable support for the SDX65 (IPA v5.0), SM8450 (IPA v5.1),
and SM8550 (IPA v5.5).

Fix the comment about the GSI version used for IPA v3.1.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The reg_addr field in the IPA structure is set but never used.
Get rid of it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Starting at IPA v4.11, the GSI_GENERIC_COMMAND GSI register got a
new PARAMS field.  The code that encodes a value into that field
sets it unconditionally, which is wrong.

We currently only provide 0 as the field's value, so this error has
no real effect.  Still, it's a bug, so let's fix it.

Fix an (unrelated) incorrect comment as well.  Fields in the
ERROR_LOG GSI register actually *are* defined for IPA versions
prior to v3.5.1.

Fixes: fe68c43c ("net: ipa: support enhanced channel flow control")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the following TC flower filter keys to lan966x for IS2:
- ipv4_addr (sip and dip)
- ipv6_addr (sip and dip)
- control (IPv4 fragments)
- portnum (tcp and udp port numbers)
- basic (L3 and L4 protocol)
- vlan (outer vlan tag info)
- tcp (tcp flags)
- ip (tos field)

As the parsing of these keys is similar between lan966x and sparx5, move
the code in a separate file to be shared by these 2 chips. And put the
specific parsing outside of the common functions.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:

====================
rxrpc development

Here are some miscellaneous changes for rxrpc:

 (1) Use consume_skb() rather than kfree_skb_reason().

 (2) Fix unnecessary waking when poking and already-poked call.

 (3) Add ack.rwind to the rxrpc_tx_ack tracepoint as this indicates how
     many incoming DATA packets we're telling the peer that we are
     currently willing to accept on this call.

 (4) Reduce duplicate ACK transmission.  We send ACKs to let the peer know
     that we're increasing the receive window (ack.rwind) as we consume
     packets locally.  Normal ACK transmission is triggered in three places
     and that leads to duplicates being sent.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove unused bulk clocks struct from the miic state and use an already
existing miic variable in miic_config().
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20230208161249.329631-1-clement.leger@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use string_is_terminated() helper instead of cpecific memchr() call.
This shows better the intention of the call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230208133153.22528-3-andriy.shevchenko@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use string_is_terminated() helper instead of cpecific memchr() call.
This shows better the intention of the call.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230208133153.22528-2-andriy.shevchenko@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Move string_is_valid() to the header for wider use.

While at it, rename to string_is_terminated() to be
precise about its semantics.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230208133153.22528-1-andriy.shevchenko@linux.intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>