R-Car AVB-DMAC has 4 Transmit start request queues, whereas
RZ/G2L has only 1 Transmit start request queue.

Add a tsrq variable to struct ravb_hw_info to handle this
difference.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

R-Car supports gPTP feature whereas RZ/G2L does not support it.
This patch excludes gtp feature support for RZ/G2L.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Initialize GbEthernet DMAC found on RZ/G2L SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RZ/G2L SoC has Gigabit Ethernet IP consisting of Ethernet controller
(E-MAC), Internal TCP/IP Offload Engine (TOE) and Dedicated Direct
memory access controller (DMAC).

This patch adds compatible string for RZ/G2L and fills up the
ravb_hw_info struct. Function stubs are added which will be used by
gbeth_hw_info and will be filled incrementally.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

R-Car supports network control queue whereas RZ/G2L does not support
it. Add nc_queue to struct ravb_hw_info, so that NC queue is handled
only by R-Car.

This patch also renames ravb_rcar_dmac_init to ravb_dmac_init_rcar
to be consistent with the naming convention used in sh_eth driver.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename the variable "no_ptp_cfg_active" with "gptp" and
"ptp_cfg_active" with "ccc_gac" to match the HW features.

There is no functional change.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename "ravb_set_features_rx_csum" function to "ravb_set_features_rcar" and
replace the function pointer "set_rx_csum_feature" with "set_feature".
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
bpf-next 2021-10-02

We've added 85 non-merge commits during the last 15 day(s) which contain
a total of 132 files changed, 13779 insertions(+), 6724 deletions(-).

The main changes are:

1) Massive update on test_bpf.ko coverage for JITs as preparatory work for
   an upcoming MIPS eBPF JIT, from Johan Almbladh.

2) Add a batched interface for RX buffer allocation in AF_XDP buffer pool,
   with driver support for i40e and ice from Magnus Karlsson.

3) Add legacy uprobe support to libbpf to complement recently merged legacy
   kprobe support, from Andrii Nakryiko.

4) Add bpf_trace_vprintk() as variadic printk helper, from Dave Marchevsky.

5) Support saving the register state in verifier when spilling <8byte bounded
   scalar to the stack, from Martin Lau.

6) Add libbpf opt-in for stricter BPF program section name handling as part
   of libbpf 1.0 effort, from Andrii Nakryiko.

7) Add a document to help clarifying BPF licensing, from Alexei Starovoitov.

8) Fix skel_internal.h to propagate errno if the loader indicates an internal
   error, from Kumar Kartikeya Dwivedi.

9) Fix build warnings with -Wcast-function-type so that the option can later
   be enabled by default for the kernel, from Kees Cook.

10) Fix libbpf to ignore STT_SECTION symbols in legacy map definitions as it
    otherwise errors out when encountering them, from Toke Høiland-Jørgensen.

11) Teach libbpf to recognize specialized maps (such as for perf RB) and
    internally remove BTF type IDs when creating them, from Hengqi Chen.

12) Various fixes and improvements to BPF selftests.
====================

Link: https://lore.kernel.org/r/20211002001327.15169-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

napi_busy_loop() disables preemption and performs a NAPI poll. We can't acquire
sleeping locks with disabled preemption which would be required while
__napi_poll() invokes the callback of the driver.

A threaded interrupt performing the NAPI-poll can be preempted on PREEMPT_RT.
A RT thread on another CPU may observe NAPIF_STATE_SCHED bit set and busy-spin
until it is cleared or its spin time runs out. Given it is the task with the
highest priority it will never observe the NEED_RESCHED bit set.
In this case the time is better spent by simply sleeping.

The NET_RX_BUSY_POLL is disabled by default (the system wide sysctls for
poll/read are set to zero). Disabling NET_RX_BUSY_POLL on PREEMPT_RT to avoid
wrong locking context in case it is used.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20211001145841.2308454-1-bigeasy@linutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Hengqi Chen says:

====================

Currently a bunch of (usually pretty specialized) BPF maps do not support
specifying BTF types for they key and value. For such maps, specifying
their definition like this:

  struct {
      __uint(type, BPF_MAP_TYPE_PERF_EVENT_ARRAY);
      __type(key, int);
      __type(value, int);
  } my_perf_buf SEC(".maps");

Would actually produce warnings about retrying BPF map creation without BTF.
Users are forced to know such nuances and use __uint(key_size, 4) instead.
This is non-uniform, annoying, and inconvenient.

This patch set teaches libbpf to recognize those specialized maps and removes
BTF type IDs when creating BPF map. Also, update existing BPF selftests to
exericse this change.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

Change map definitions in BPF selftests to use BTF-defined
key/value types. This unifies the map definitions and ensures
libbpf won't emit warning about retrying map creation.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210930161456.3444544-3-hengqi.chen@gmail.com

A bunch of BPF maps do not support specifying BTF types for key and value.
This is non-uniform and inconvenient[0]. Currently, libbpf uses a retry
logic which removes BTF type IDs when BPF map creation failed. Instead
of retrying, this commit recognizes those specialized maps and removes
BTF type IDs when creating BPF map.

  [0] Closes: https://github.com/libbpf/libbpf/issues/355Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210930161456.3444544-2-hengqi.chen@gmail.com

Saeed Mahameed says:

====================
mlx5-updates-2021-09-30

1) From Yevgeny Kliteynik:

This patch series deals with vport handling in SW steering.

For every vport, SW steering queries FW for this vport's properties,
such as RX/TX ICM addresses to be able to add this vport as dest action.
The following patches rework vport capabilities managements and add support
for Scalable Functions (SFs).

 - Patch 1 fixes the vport number data type all over the DR code to 16 bits
   in accordance with HW spec.
 - Patch 2 replaces local SW steering WIRE_PORT macro with the existing
   mlx5 define.
 - Patch 3 adds missing query for vport 0 and and handles eswitch manager
   capabilities for ECPF (BlueField in embedded CPU mode).
 - Patch 4 fixes error messages for failure to obtain vport caps from
   different locations in the code to have the same verbosity level and
   similar wording.
 - Patch 5 adds support for csum recalculation flow tables on SFs: it
   implements these FTs management in XArray instead of the fixed size array,
   thus adding support for csum recalculation table for any valid vport.
 - Patch 6 is the main patch of this whole series: it refactors vports
   capabilities handling and adds SFs support.

2) Minor and trivial updates and cleanups

* tag 'mlx5-updates-2021-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Use array_size() helper
  net/mlx5: Use struct_size() helper in kvzalloc()
  net/mlx5: Use kvcalloc() instead of kvzalloc()
  net/mlx5: Tolerate failures in debug features while driver load
  net/mlx5: Warn for devlink reload when there are VFs alive
  net/mlx5: DR, Add missing string for action type SAMPLER
  net/mlx5: DR, init_next_match only if needed
  net/mlx5: DR, Fix typo 'offeset' to 'offset'
  net/mlx5: DR, Increase supported num of actions to 32
  net/mlx5: DR, Add support for SF vports
  net/mlx5: DR, Support csum recalculation flow table on SFs
  net/mlx5: DR, Align error messages for failure to obtain vport caps
  net/mlx5: DR, Add missing query for vport 0
  net/mlx5: DR, Replace local WIRE_PORT macro with the existing MLX5_VPORT_UPLINK
  net/mlx5: DR, Fix vport number data type to u16
====================

Link: https://lore.kernel.org/r/20210930232050.41779-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch adds a set of tests of BPF_LDX_MEM where both operand registers
are the same register. Mainly testing 32-bit JITs that may load a 64-bit
value in two 32-bit loads, and must not overwrite the address register.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-11-johan.almbladh@anyfinetworks.com

This patch adds a tests of ALU32 and ALU64 LSH/RSH/ARSH operations for the
case when the two operands are the same register. Mainly intended to test
JITs that implement ALU64 shifts with 32-bit CPU instructions.

Also renamed related helper functions for consistency with the new tests.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-10-johan.almbladh@anyfinetworks.com

This patch adds tests of all register combinations for BPF_ATOMIC
operations on both BPF_W and BPF_DW sizes.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-9-johan.almbladh@anyfinetworks.com

This patch replaces the current register combination test with new
exhaustive tests. Before, only a subset of register combinations was
tested for ALU64 DIV. Now, all combinatons of operand registers are
tested, including the case when they are the same, and for all ALU32
and ALU64 operations.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-8-johan.almbladh@anyfinetworks.com

This patch moves the ALU LSH/RSH/ARSH reference computations into the
common reference value function. Also fix typo in constants so they
now have the intended values.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-7-johan.almbladh@anyfinetworks.com

This patch expands the register-clobbering-during-function-call tests
to cover more all ALU32/64 MUL, DIV and MOD operations and all ATOMIC
operations. In short, if a JIT implements a complex operation with
a call to an external function, it must make sure to save and restore
all its caller-saved registers that may be clobbered by the call.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-6-johan.almbladh@anyfinetworks.com

This patch adds tests to check that the source register is preserved when
zero-extending a 32-bit value. In particular, it checks that the source
operand is not zero-extended in-place.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-5-johan.almbladh@anyfinetworks.com

This patch adds a series of test to verify the operation of BPF_ATOMIC
with BPF_DW and BPF_W sizes, for all power-of-two magnitudes of the
register value operand.

Also fixes a confusing typo in the comment for a related test.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-4-johan.almbladh@anyfinetworks.com

This patch updates the existing tests of BPF_ATOMIC operations to verify
that a 32-bit register operand is properly zero-extended. In particular,
it checks the operation on archs that require 32-bit operands to be
properly zero-/sign-extended or the result is undefined, e.g. MIPS64.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-3-johan.almbladh@anyfinetworks.com

This patch adds a series of tests to verify the behavior of BPF_LDX and
BPF_STX with BPF_B//W sizes in isolation. In particular, it checks that
BPF_LDX zero-extendeds the result, and that BPF_STX does not overwrite
adjacent bytes in memory.

BPF_ST and operations on BPF_DW size are deemed to be sufficiently
tested by existing tests.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211001130348.3670534-2-johan.almbladh@anyfinetworks.com

Some architectures do not include uapi/asm/socket.h

Fixes: 2bb2f5fb ("net: add new socket option SO_RESERVE_MEM")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 4f42ad20, reversing
changes made to ea2dd331.

These chanfges break the build when mctp is modular.
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Each region has an independently configurable number of maximum
snapshots. This information is not reported to userspace, making it not
very discoverable. Fix this by adding a new
DEVLINK_ATTR_REGION_MAX_SNAPSHOST attribute which is used to report this
maximum.

Ex:

  $devlink region
  pci/0000:af:00.0/nvm-flash: size 10485760 snapshot [] max 1
  pci/0000:af:00.0/device-caps: size 4096 snapshot [] max 10
  pci/0000:af:00.1/nvm-flash: size 10485760 snapshot [] max 1
  pci/0000:af:00.1/device-caps: size 4096 snapshot [] max 10

This information enables users to understand why a new region command
may fail due to having too many existing snapshots.

Reported-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeremy Kerr says:

====================
MCTP kunit tests

This change adds some initial kunit tests for the MCTP core. We'll
expand the coverage in a future series, and augment with a few
selftests, but this establishes a baseline set of tests for now.

Thanks to the kunit folks for the framework!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add multi-packet route input tests, for message reassembly. These will
feed packets to be received by a bound socket, or dropped.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a few tests for single-packet route inputs, testing the
mctp_route_input function.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a few tests for the initial packet ingress through
mctp_pkttype_receive function; mainly packet header sanity checks. Full
input routing checks will be added as a separate change.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new object for shared test utilities
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This change adds the first kunit test for the mctp subsystem, and an
initial test for the fragmentation path.

We're adding tests under a new net/mctp/test/ directory.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5 fixes 2021-09-30

This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows
that, in the worst scenario, could lead to heap overflows.

Link: https://github.com/KSPP/linux/issues/160Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20210929201718.GA342296@embeddedorSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use array_size() helper to aid in 2-factor allocation instances.

Link: https://github.com/KSPP/linux/issues/160Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worse scenario, could lead to heap overflows.

Link: https://github.com/KSPP/linux/issues/160Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Use 2-factor argument form kvcalloc() instead of kvzalloc().

Link: https://github.com/KSPP/linux/issues/162Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

FW tracer and resource dump are debug features. Although failing to
initialize them may indicate an error, don't let this stop device
loading.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When performing PF reload, VF can't communicate with FW until
it recovers and reloads as well.

Add a warning message when performing devlink reload while
VFs are still present. Thus, giving a notice of an unfavorable
behavior that might occur as a result of a consequential reloads
and cause interruption of VF recovery.
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>