- 06 Mar, 2015 40 commits
-
-
David Hildenbrand authored
commit 428d53be upstream. We have to delete the allocated interrupt info if __inject_vm() fails. Otherwise user space can keep flooding kvm with floating interrupts and provoke more and more memory leaks. Reported-by:
Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by:
David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Hildenbrand authored
commit 8e2207cd upstream. If a vm with no VCPUs is created, the injection of a floating irq leads to an endless loop in the kernel. Let's skip the search for a destination VCPU for a floating irq if no VCPUs were created. Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
David Hildenbrand authored
commit 0ac96caf upstream. The hrtimer that handles the wait with enabled timer interrupts should not be disturbed by changes of the host time. This patch changes our hrtimer to be based on a monotonic clock. Signed-off-by:
-
David Hildenbrand authored
commit 2d00f759 upstream. Patch 0759d068 ("KVM: s390: cleanup handle_wait by reusing kvm_vcpu_block") changed the way pending guest clock comparator interrupts are detected. It was assumed that as soon as the hrtimer wakes up, the condition for the guest ckc is satisfied. This is however only true as long as adjclock() doesn't speed up the monotonic clock. Reason is that the hrtimer is based on CLOCK_MONOTONIC, the guest clock comparator detection is based on the raw TOD clock. If CLOCK_MONOTONIC runs faster than the TOD clock, the hrtimer wakes the target VCPU up too early and the target VCPU will not detect any pending interrupts, therefore going back to sleep. It will never be woken up again because the hrtimer has finished. The VCPU is stuck. As a quick fix, we have to forward the hrtimer until the guest clock comparator is really due, to guarantee properly timed wake ups. As the hrtimer callback might be triggered on another cpu, we have to make sure that the timer is really stopped and not currently executing the callback on another cpu. This can happen if the vcpu thread is scheduled onto another physical cpu, but the timer base is not migrated. So lets use hrtimer_cancel instead of try_to_cancel. A proper fix might be to introduce a RAW based hrtimer. Reported-by:
-
Marcelo Tosatti authored
commit 7f187922 upstream. When the guest writes to the TSC, the masterclock TSC copy must be updated as well along with the TSC_OFFSET update, otherwise a negative tsc_timestamp is calculated at kvm_guest_time_update. Once "if (!vcpus_matched && ka->use_master_clock)" is simplified to "if (ka->use_master_clock)", the corresponding "if (!ka->use_master_clock)" becomes redundant, so remove the do_request boolean and collapse everything into a single condition. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jan Kara authored
commit 23b133bd upstream. Check length of extended attributes and allocation descriptors when loading inodes from disk. Otherwise corrupted filesystems could confuse the code and make the kernel oops. Reported-by:
Carl Henrik Lunde <chlunde@ping.uio.no> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 79144954 upstream. Store blocksize in a local variable in udf_fill_inode() since it is used a lot of times. Signed-off-by:
-
Markos Chandras authored
commit ed4cbc81 upstream. activate_mm() and switch_mm() call get_new_mmu_context() which in turn can enable the HTW before the entryhi is changed with the new ASID. Since the latter will enable the HTW in local_flush_tlb_all(), then there is a small timing window where the HTW is running with the new ASID but with an old pgd since the TLBMISS_HANDLER_SETUP_PGD hasn't assigned a new one yet. In order to prevent that, we introduce a simple htw counter to avoid starting HTW accidentally due to nested htw_{start,stop}() sequences. Moreover, since various IPI calls can enforce TLB flushing operations on a different core, such an operation may interrupt another htw_{stop,start} in progress leading inconsistent updates of the htw_seq variable. In order to avoid that, we disable the interrupts whenever we update that variable. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9118/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Alexey Brodkin authored
commit 06f34e1c upstream. We used to calculate page address differently in 2 cases: 1. In virt_to_page(x) we do --->8--- mem_map + (x - CONFIG_LINUX_LINK_BASE) >> PAGE_SHIFT --->8--- 2. In in pte_page(x) we do --->8--- mem_map + (pte_val(x) - PAGE_OFFSET) >> PAGE_SHIFT --->8--- That leads to problems in case PAGE_OFFSET != CONFIG_LINUX_LINK_BASE - different pages will be selected depending on where and how we calculate page address. In particular in the STAR 9000853582 when gdb attempted to read memory of another process it got improper page in get_user_pages() because this is exactly one of the places where we search for a page by pte_page(). The fix is trivial - we need to calculate page address similarly in both cases. Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Stefan Agner authored
commit 5f1437f6 upstream. When the UART is in DMA receive mode (RDMAS set) and one character just arrived while another interrupt is handled (e.g. TX), the RDRF (receiver data register full flag) is set due to the water level of 1. But since the DMA will take care of this character, there is no need to handle it by calling lpuart_prepare_rx. Handling it leads to adding the RX timeout timer twice: [ 74.336698] Kernel BUG at 80053070 [verbose debug info unavailable] [ 74.342999] Internal error: Oops - BUG: 0 [#1] ARM0:00.00 khungtaskd [ 74.347817] Modules linked in: 0 S 0.0 0.0 0:00.00 writeback [ 74.350926] CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-rc3-00001-g39d78e2 #1788 [ 74.358617] Hardware name: Freescale Vybrid VF610 (Device Tree)t [ 74.364563] task: 807a7678 ti: 8079c000 task.ti: 8079c000 kblockd [ 74.370002] PC is at add_timer+0x24/0x28.0 0.0 0:00.09 kworker/u2:1 [ 74.373960] LR is at lpuart_int+0x15c/0x3d8 [ 74.378171] pc : [<80053070>] lr : [<802e0d88>] psr: a0010193 [ 74.378171] sp : 8079de10 ip : 8079de20 fp : 8079de1c [ 74.389694] r10: 807d44c0 r9 : 8688c300 r8 : 00000013 [ 74.394943] r7 : 20010193 r6 : 00000000 r5 : 000000a0 r4 : 86997210 [ 74.401498] r3 : ffffa7da r2 : 80817868 r1 : 86997210 r0 : 86997344 [ 74.408052] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 74.415489] Control: 10c5387d Table: 8611c059 DAC: 00000015 [ 74.421265] Process swapper (pid: 0, stack limit = 0x8079c230) ... Solve this by only execute the receiver path (lpuart_prepare_rx) if the DMA receive mode (RDMAS) is not set. Also, make sure the flag is cleared on initialization, in case it has been left set. This can be best reproduced using UART as a serial console, then running top while dd'ing data into the terminal. Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Stefan Agner authored
commit 4a8588a1 upstream. If the serial port gets closed while a RX transfer is in progress, the timer might fire after the serial port shutdown finished. This leads in a NULL pointer dereference: [ 7.508324] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.516590] pgd = 86348000 [ 7.519445] [00000000] *pgd=86179831, *pte=00000000, *ppte=00000000 [ 7.526145] Internal error: Oops: 17 [#1] ARM [ 7.530611] Modules linked in: [ 7.533876] CPU: 0 PID: 123 Comm: systemd Not tainted 3.19.0-rc3-00004-g5b11ea7 #1778 [ 7.541827] Hardware name: Freescale Vybrid VF610 (Device Tree) [ 7.547862] task: 861c3400 ti: 86ac8000 task.ti: 86ac8000 [ 7.553392] PC is at lpuart_timer_func+0x24/0xf8 [ 7.558127] LR is at lpuart_timer_func+0x20/0xf8 [ 7.562857] pc : [<802df99c>] lr : [<802df998>] psr: 600b0113 [ 7.562857] sp : 86ac9b90 ip : 86ac9b90 fp : 86ac9bbc [ 7.574467] r10: 80817180 r9 : 80817b98 r8 : 80817998 [ 7.579803] r7 : 807acee0 r6 : 86989000 r5 : 00000100 r4 : 86997210 [ 7.586444] r3 : 86ac8000 r2 : 86ac9bc0 r1 : 86997210 r0 : 00000000 [ 7.593085] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 7.600341] Control: 10c5387d Table: 86348059 DAC: 00000015 [ 7.606203] Process systemd (pid: 123, stack limit = 0x86ac8230) Setup the timer on UART startup which allows to delete the timer unconditionally on shutdown. This also saves the initialization on each transfer. Signed-off-by:
-
John Stultz authored
commit 29183a70 upstream. Additional validation of adjtimex freq values to avoid potential multiplication overflows were added in commit 5e5aeb43 (time: adjtimex: Validate the ADJ_FREQUENCY values) Unfortunately the patch used LONG_MAX/MIN instead of LLONG_MAX/MIN, which was fine on 64-bit systems, but being much smaller on 32-bit systems caused false positives resulting in most direct frequency adjustments to fail w/ EINVAL. ntpd only does direct frequency adjustments at startup, so the issue was not as easily observed there, but other time sync applications like ptpd and chrony were more effected by the bug. See bugs: https://bugzilla.kernel.org/show_bug.cgi?id=92481 https://bugzilla.redhat.com/show_bug.cgi?id=1188074 This patch changes the checks to use LLONG_MAX for clarity, and additionally the checks are disabled on 32-bit systems since LLONG_MAX/PPM_SCALE is always larger then the 32-bit long freq value, so multiplication overflows aren't possible there. Reported-by:
Josh Boyer <jwboyer@fedoraproject.org> Reported-by:
George Joseph <george.joseph@fairview5.com> Tested-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Sasha Levin <sasha.levin@oracle.com> Link: http://lkml.kernel.org/r/1423553436-29747-1-git-send-email-john.stultz@linaro.org [ Prettified the changelog and the comments a bit. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jay Lan authored
commit 14675592 upstream. The output of KDB 'summary' command should report MemTotal, MemFree and Buffers output in kB. Current codes report in unit of pages. A define of K(x) as is defined in the code, but not used. This patch would apply the define to convert the values to kB. Please include me on Cc on replies. I do not subscribe to linux-kernel. Signed-off-by:
Jay Lan <jlan@sgi.com> Signed-off-by:
Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
-
Arnd Bergmann authored
commit 16523518 upstream. mvebu_armada375_smp_wa_init is only used on armada 375 but is defined for all mvebu machines. As it calls a function that is only provided sometimes, this can result in a link error: arch/arm/mach-mvebu/built-in.o: In function `mvebu_armada375_smp_wa_init': :(.text+0x228): undefined reference to `mvebu_setup_boot_addr_wa' To solve this, we can just change the existing #ifdef around the function to also check for Armada375 SMP platforms. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 305969fb ("ARM: mvebu: use the common function for Armada 375 SMP workaround") Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Gregory Clement <gregory.clement@free-electrons.com> Signed-off-by:
-
Arnd Bergmann authored
commit 95fcedb0 upstream. The vexpress tc2 power management code calls mcpm_loopback, which is only available if ARM_CPU_SUSPEND is enabled, otherwise we get a link error: arch/arm/mach-vexpress/built-in.o: In function `tc2_pm_init': arch/arm/mach-vexpress/tc2_pm.c:389: undefined reference to `mcpm_loopback' This explicitly selects ARM_CPU_SUSPEND like other platforms that need it. Signed-off-by:
Nicolas Pitre <nico@linaro.org> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
Dmitry Eremin-Solenikov authored
commit 9bc78f32 upstream. Add regulator_has_full_constraints() call to poodle board file to let regulator core know that we do not have any additional regulators left. This lets it substitute unprovided regulators with dummy ones. This fixes the following warnings that can be seen on poodle if regulators are enabled: ads7846 spi1.0: unable to get regulator: -517 spi spi1.0: Driver ads7846 requests probe deferral wm8731 0-001b: Failed to get supply 'AVDD': -517 wm8731 0-001b: Failed to request supplies: -517 wm8731 0-001b: ASoC: failed to probe component -517 Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Dmitry Eremin-Solenikov authored
commit 271e8017 upstream. Add regulator_has_full_constraints() call to corgi board file to let regulator core know that we do not have any additional regulators left. This lets it substitute unprovided regulators with dummy ones. This fixes the following warnings that can be seen on corgi if regulators are enabled: ads7846 spi1.0: unable to get regulator: -517 spi spi1.0: Driver ads7846 requests probe deferral wm8731 0-001b: Failed to get supply 'AVDD': -517 wm8731 0-001b: Failed to request supplies: -517 wm8731 0-001b: ASoC: failed to probe component -517 corgi-audio corgi-audio: ASoC: failed to instantiate card -517 Signed-off-by:
-
Nicolas Pitre authored
commit 19e3ae6b upstream. The vcs device's poll/fasync support relies on the vt notifier to signal changes to the screen content. Notifier invocations were missing for changes that comes through the selection interface though. Fix that. Tested with BRLTTY 5.2. Signed-off-by:
-
Alan Stern authored
commit 074f9dd5 upstream. Currently the USB stack assumes that all host controller drivers are capable of receiving wakeup requests from downstream devices. However, this isn't true for the isp1760-hcd driver, which means that it isn't safe to do a runtime suspend of any device attached to a root-hub port if the device requires wakeup. This patch adds a "cant_recv_wakeups" flag to the usb_hcd structure and sets the flag in isp1760-hcd. The core is modified to prevent a direct child of the root hub from being put into runtime suspend with wakeup enabled if the flag is set. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
Greg Kroah-Hartman <greg@kroah.com> Signed-off-by:
-
Alan Stern authored
commit 524134d4 upstream. The USB stack provides a mechanism for drivers to request an asynchronous device reset (usb_queue_reset_device()). The mechanism uses a work item (reset_ws) embedded in the usb_interface structure used by the driver, and the reset is carried out by a work queue routine. The asynchronous reset can race with driver unbinding. When this happens, we try to cancel the queued reset before unbinding the driver, on the theory that the driver won't care about any resets once it is unbound. However, thanks to the fact that lockdep now tracks work queue accesses, this can provoke a lockdep warning in situations where the device reset causes another interface's driver to be unbound; see http://marc.info/?l=linux-usb&m=141893165203776&w=2 for an example. The reason is that the work routine for reset_ws in one interface calls cancel_queued_work() for the reset_ws in another interface. Lockdep thinks this might lead to a work routine trying to cancel itself. The simplest solution is not to cancel queued resets when unbinding drivers. This means we now need to acquire a reference to the usb_interface when queuing a reset_ws work item and to drop the reference when the work routine finishes. We also need to make sure that the usb_interface structure doesn't outlive its parent usb_device; this means acquiring and dropping a reference when the interface is created and destroyed. In addition, cancelling a queued reset can fail (if the device is in the middle of an earlier reset), and this can cause usb_reset_device() to try to rebind an interface that has been deallocated (see http://marc.info/?l=linux-usb&m=142175717016628&w=2 for details). Acquiring the extra references prevents this failure. Signed-off-by:
Russell King - ARM Linux <linux@arm.linux.org.uk> Reported-by:
Olivier Sobrie <olivier@sobrie.be> Tested-by:
-
Sebastian Andrzej Siewior authored
commit 5efd2ea8 upstream. the following error pops up during "testusb -a -t 10" | musb-hdrc musb-hdrc.1.auto: dma_pool_free buffer-128, f134e000/be842000 (bad dma) hcd_buffer_create() creates a few buffers, the smallest has 32 bytes of size. ARCH_KMALLOC_MINALIGN is set to 64 bytes. This combo results in hcd_buffer_alloc() returning memory which is 32 bytes aligned and it might by identified by buffer_offset() as another buffer. This means the buffer which is on a 32 byte boundary will not get freed, instead it tries to free another buffer with the error message. This patch fixes the issue by creating the smallest DMA buffer with the size of ARCH_KMALLOC_MINALIGN (or 32 in case ARCH_KMALLOC_MINALIGN is smaller). This might be 32, 64 or even 128 bytes. The next three pools will have the size 128, 512 and 2048. In case the smallest pool is 128 bytes then we have only three pools instead of four (and zero the first entry in the array). The last pool size is always 2048 bytes which is the assumed PAGE_SIZE / 2 of 4096. I doubt it makes sense to continue using PAGE_SIZE / 2 where we would end up with 8KiB buffer in case we have 16KiB pages. Instead I think it makes sense to have a common size(s) and extend them if there is need to. There is a BUILD_BUG_ON() now in case someone has a minalign of more than 128 bytes. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
-
Alan Stern authored
commit c9919790 upstream. The usb_hcd_unlink_urb() routine in hcd.c contains two possible use-after-free errors. The dev_dbg() statement at the end of the routine dereferences urb and urb->dev even though both structures may have been deallocated. This patch fixes the problem by storing urb->dev in a local variable (avoiding the dereference of urb) and moving the dev_dbg() up before the usb_put_dev() call. Signed-off-by:
Joe Lawrence <joe.lawrence@stratus.com> Tested-by:
-
Lennart Sorensen authored
commit a6f03312 upstream. Added the USB serial console device ID for Siemens Ruggedcom devices which have a USB port for their serial console. Signed-off-by:
Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Alexander Usyskin authored
commit 663b7ee9 upstream. We might enter the interrupt handler with hw_ready already set, but prior we actually started the reset flow. To soleve this we move the reset release from the interrupt handler to the HW start wait function which is part of the reset sequence. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Alexander Usyskin authored
commit 1ab1e79b upstream. We should mask interrupt set bit when writing back hcsr value in reset bit clean-up. This is refinement for mei: clean reset bit before reset commit b13a65efSigned-off-by:
-
Cyrille Pitchen authored
commit 6fbb9bdf upstream. -EDEFER error wasn't handle properly by atmel_serial_probe(). As an example, when atmel_serial_probe() is called for the first time, we pass the test_and_set_bit() test to check whether the port has already been initalized. Then we call atmel_init_port(), which may return -EDEFER, possibly returned before by clk_get(). Consequently atmel_serial_probe() used to return this error code WITHOUT clearing the port bit in the "atmel_ports_in_use" mask. When atmel_serial_probe() was called for the second time, it used to fail on the test_and_set_bit() function then returning -EBUSY. When atmel_serial_probe() fails, this patch make it clear the port bit in the "atmel_ports_in_use" mask, if needed, before returning the error code. Signed-off-by:
Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Peter Hurley authored
commit 37480a05 upstream. Commit 26df6d13 ("tty: Add EXTPROC support for LINEMODE") allows a process which has opened a pty master to send _any_ signal to the process group of the pty slave. Although potentially exploitable by a malicious program running a setuid program on a pty slave, it's unknown if this exploit currently exists. Limit to signals actually used. Cc: Theodore Ts'o <tytso@mit.edu> Cc: Howard Chu <hyc@symas.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Matthew Wilcox authored
commit 91117a20 upstream. The 'pfn' returned by axonram was completely bogus, and has been since 2008. Signed-off-by:
Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Andrey Ryabinin authored
commit 6d1cff2a upstream. We hit use after free on dereferncing pointer to task_smack struct in smk_of_task() called from smack_task_to_inode(). task_security() macro uses task_cred_xxx() to get pointer to the task_smack. task_cred_xxx() could be used only for non-pointer members of task's credentials. It cannot be used for pointer members since what they point to may disapper after dropping RCU read lock. Mainly task_security() used this way: smk_of_task(task_security(p)) Intead of this introduce function smk_of_task_struct() which takes task_struct as argument and returns pointer to smk_known struct and do this under RCU read lock. Bogus task_security() macro is not used anymore, so remove it. KASan's report for this: AddressSanitizer: use after free in smack_task_to_inode+0x50/0x70 at addr c4635600 ============================================================================= BUG kmalloc-64 (Tainted: PO): kasan error ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in new_task_smack+0x44/0xd8 age=39 cpu=0 pid=1866 kmem_cache_alloc_trace+0x88/0x1bc new_task_smack+0x44/0xd8 smack_cred_prepare+0x48/0x21c security_prepare_creds+0x44/0x4c prepare_creds+0xdc/0x110 smack_setprocattr+0x104/0x150 security_setprocattr+0x4c/0x54 proc_pid_attr_write+0x12c/0x194 vfs_write+0x1b0/0x370 SyS_write+0x5c/0x94 ret_fast_syscall+0x0/0x48 INFO: Freed in smack_cred_free+0xc4/0xd0 age=27 cpu=0 pid=1564 kfree+0x270/0x290 smack_cred_free+0xc4/0xd0 security_cred_free+0x34/0x3c put_cred_rcu+0x58/0xcc rcu_process_callbacks+0x738/0x998 __do_softirq+0x264/0x4cc do_softirq+0x94/0xf4 irq_exit+0xbc/0x120 handle_IRQ+0x104/0x134 gic_handle_irq+0x70/0xac __irq_svc+0x44/0x78 _raw_spin_unlock+0x18/0x48 sync_inodes_sb+0x17c/0x1d8 sync_filesystem+0xac/0xfc vdfs_file_fsync+0x90/0xc0 vfs_fsync_range+0x74/0x7c INFO: Slab 0xd3b23f50 objects=32 used=31 fp=0xc4635600 flags=0x4080 INFO: Object 0xc4635600 @offset=5632 fp=0x (null) Bytes b4 c46355f0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Object c4635600: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object c4635610: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object c4635620: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object c4635630: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. Redzone c4635640: bb bb bb bb .... Padding c46356e8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ Padding c46356f8: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 5 PID: 834 Comm: launchpad_prelo Tainted: PBO 3.10.30 #1 Backtrace: [<c00233a4>] (dump_backtrace+0x0/0x158) from [<c0023dec>] (show_stack+0x20/0x24) r7:c4634010 r6:d3b23f50 r5:c4635600 r4:d1002140 [<c0023dcc>] (show_stack+0x0/0x24) from [<c06d6d7c>] (dump_stack+0x20/0x28) [<c06d6d5c>] (dump_stack+0x0/0x28) from [<c01c1d50>] (print_trailer+0x124/0x144) [<c01c1c2c>] (print_trailer+0x0/0x144) from [<c01c1e88>] (object_err+0x3c/0x44) r7:c4635600 r6:d1002140 r5:d3b23f50 r4:c4635600 [<c01c1e4c>] (object_err+0x0/0x44) from [<c01cac18>] (kasan_report_error+0x2b8/0x538) r6:d1002140 r5:d3b23f50 r4:c6429cf8 r3:c09e1aa7 [<c01ca960>] (kasan_report_error+0x0/0x538) from [<c01c9430>] (__asan_load4+0xd4/0xf8) [<c01c935c>] (__asan_load4+0x0/0xf8) from [<c031e168>] (smack_task_to_inode+0x50/0x70) r5:c4635600 r4:ca9da000 [<c031e118>] (smack_task_to_inode+0x0/0x70) from [<c031af64>] (security_task_to_inode+0x3c/0x44) r5:cca25e80 r4:c0ba9780 [<c031af28>] (security_task_to_inode+0x0/0x44) from [<c023d614>] (pid_revalidate+0x124/0x178) r6:00000000 r5:cca25e80 r4:cbabe3c0 r3:00008124 [<c023d4f0>] (pid_revalidate+0x0/0x178) from [<c01db98c>] (lookup_fast+0x35c/0x43y4) r9:c6429efc r8:00000101 r7:c079d940 r6:c6429e90 r5:c6429ed8 r4:c83c4148 [<c01db630>] (lookup_fast+0x0/0x434) from [<c01deec8>] (do_last.isra.24+0x1c0/0x1108) [<c01ded08>] (do_last.isra.24+0x0/0x1108) from [<c01dff04>] (path_openat.isra.25+0xf4/0x648) [<c01dfe10>] (path_openat.isra.25+0x0/0x648) from [<c01e1458>] (do_filp_open+0x3c/0x88) [<c01e141c>] (do_filp_open+0x0/0x88) from [<c01ccb28>] (do_sys_open+0xf0/0x198) r7:00000001 r6:c0ea2180 r5:0000000b r4:00000000 [<c01cca38>] (do_sys_open+0x0/0x198) from [<c01ccc00>] (SyS_open+0x30/0x34) [<c01ccbd0>] (SyS_open+0x0/0x34) from [<c001db80>] (ret_fast_syscall+0x0/0x48) Read of size 4 by thread T834: Memory state around the buggy address: c4635380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc c4635400: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc c4635480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc c4635500: 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc c4635580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >c4635600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ c4635680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb c4635700: 00 00 00 00 04 fc fc fc fc fc fc fc fc fc fc fc c4635780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc c4635800: 00 00 00 00 00 00 04 fc fc fc fc fc fc fc fc fc c4635880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ================================================================== Signed-off-by:
Andrey Ryabinin <a.ryabinin@samsung.com> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 1e0d6714 upstream. When an application connects to the ring buffer via splice, it can only read full pages. Splice does not work with partial pages. If there is not enough data to fill a page, the splice command will either block or return -EAGAIN (if set to nonblock). Code was added where if the page is not full, to just sleep again. The problem is, it will get woken up again on the next event. That is, when something is written into the ring buffer, if there is a waiter it will wake it up. The waiter would then check the buffer, see that it still does not have enough data to fill a page and go back to sleep. To make matters worse, when the waiter goes back to sleep, it could cause another event, which would wake it back up again to see it doesn't have enough data and sleep again. This produces a tremendous overhead and fills the ring buffer with noise. For example, recording sched_switch on an idle system for 10 seconds produces 25,350,475 events!!! Create another wait queue for those waiters wanting full pages. When an event is written, it only wakes up waiters if there's a full page of data. It does not wake up the waiter if the page is not yet full. After this change, recording sched_switch on an idle system for 10 seconds produces only 800 events. Getting rid of 25,349,675 useless events (99.9969% of events!!), is something to take seriously. Cc: Rabin Vincent <rabin@rab.in> Fixes: e30f53aa "tracing: Do not busy wait in buffer splice" Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Paul Moore authored
commit 04f81f01 upstream. Using the IPCB() macro to get the IPv4 options is convenient, but unfortunately NetLabel often needs to examine the CIPSO option outside of the scope of the IP layer in the stack. While historically IPCB() worked above the IP layer, due to the inclusion of the inet_skb_param struct at the head of the {tcp,udp}_skb_cb structs, recent commit 971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses") reordered the tcp_skb_cb struct and invalidated this IPCB() trick. This patch fixes the problem by creating a new function, cipso_v4_optptr(), which locates the CIPSO option inside the IP header without calling IPCB(). Unfortunately, this isn't as fast as a simple lookup so some additional tweaks were made to limit the use of this new function. Reported-by:
Casey Schaufler <casey@schaufler-ca.com> Signed-off-by:
Paul Moore <pmoore@redhat.com> Tested-by:
-
Jeff Moyer authored
commit c6ce1943 upstream. Hi, If you can manage to submit an async write as the first async I/O from the context of a process with realtime scheduling priority, then a cfq_queue is allocated, but filed into the wrong async_cfqq bucket. It ends up in the best effort array, but actually has realtime I/O scheduling priority set in cfqq->ioprio. The reason is that cfq_get_queue assumes the default scheduling class and priority when there is no information present (i.e. when the async cfqq is created): static struct cfq_queue * cfq_get_queue(struct cfq_data *cfqd, bool is_sync, struct cfq_io_cq *cic, struct bio *bio, gfp_t gfp_mask) { const int ioprio_class = IOPRIO_PRIO_CLASS(cic->ioprio); const int ioprio = IOPRIO_PRIO_DATA(cic->ioprio); cic->ioprio starts out as 0, which is "invalid". So, class of 0 (IOPRIO_CLASS_NONE) is passed to cfq_async_queue_prio like so: async_cfqq = cfq_async_queue_prio(cfqd, ioprio_class, ioprio); static struct cfq_queue ** cfq_async_queue_prio(struct cfq_data *cfqd, int ioprio_class, int ioprio) { switch (ioprio_class) { case IOPRIO_CLASS_RT: return &cfqd->async_cfqq[0][ioprio]; case IOPRIO_CLASS_NONE: ioprio = IOPRIO_NORM; /* fall through */ case IOPRIO_CLASS_BE: return &cfqd->async_cfqq[1][ioprio]; case IOPRIO_CLASS_IDLE: return &cfqd->async_idle_cfqq; default: BUG(); } } Here, instead of returning a class mapped from the process' scheduling priority, we get back the bucket associated with IOPRIO_CLASS_BE. Now, there is no queue allocated there yet, so we create it: cfqq = cfq_find_alloc_queue(cfqd, is_sync, cic, bio, gfp_mask); That function ends up doing this: cfq_init_cfqq(cfqd, cfqq, current->pid, is_sync); cfq_init_prio_data(cfqq, cic); cfq_init_cfqq marks the priority as having changed. Then, cfq_init_prio data does this: ioprio_class = IOPRIO_PRIO_CLASS(cic->ioprio); switch (ioprio_class) { default: printk(KERN_ERR "cfq: bad prio %x\n", ioprio_class); case IOPRIO_CLASS_NONE: /* * no prio set, inherit CPU scheduling settings */ cfqq->ioprio = task_nice_ioprio(tsk); cfqq->ioprio_class = task_nice_ioclass(tsk); break; So we basically have two code paths that treat IOPRIO_CLASS_NONE differently, which results in an RT async cfqq filed into a best effort bucket. Attached is a patch which fixes the problem. I'm not sure how to make it cleaner. Suggestions would be welcome. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Tested-by:
Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 69abaffe upstream. Cfq_lookup_create_cfqg() allocates struct blkcg_gq using GFP_ATOMIC. In cfq_find_alloc_queue() possible allocation failure is not handled. As a result kernel oopses on NULL pointer dereference when cfq_link_cfqq_cfqg() calls cfqg_get() for NULL pointer. Bug was introduced in v3.5 in commit cd1604fa ("blkcg: factor out blkio_group creation"). Prior to that commit cfq group lookup had returned pointer to root group as fallback. This patch handles this error using existing fallback oom_cfqq. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by:
Tejun Heo <tj@kernel.org> Acked-by:
Vivek Goyal <vgoyal@redhat.com> Fixes: cd1604fa ("blkcg: factor out blkio_group creation") Signed-off-by:
-
Nicholas Bellinger authored
commit 3fd7b60f upstream. This patch drops legacy active_ts_list usage within iscsi_target_tq.c code. It was originally used to track the active thread sets during iscsi-target shutdown, and is no longer used by modern upstream code. Two people have reported list corruption using traditional iscsi-target and iser-target with the following backtrace, that appears to be related to iscsi_thread_set->ts_list being used across both active_ts_list and inactive_ts_list. [ 60.782534] ------------[ cut here ]------------ [ 60.782543] WARNING: CPU: 0 PID: 9430 at lib/list_debug.c:53 __list_del_entry+0x63/0xd0() [ 60.782545] list_del corruption, ffff88045b00d180->next is LIST_POISON1 (dead000000100100) [ 60.782546] Modules linked in: ib_srpt tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc scsi_tgt ib_isert rdma_cm iw_cm ib_addr iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge stp llc autofs4 sunrpc ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ipv6 ib_ipoib ib_cm ib_uverbs ib_umad mlx4_en mlx4_ib ib_sa ib_mad ib_core mlx4_core dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan vhost tun kvm_intel kvm uinput iTCO_wdt iTCO_vendor_support microcode serio_raw pcspkr sb_edac edac_core sg i2c_i801 lpc_ich mfd_core mtip32xx igb i2c_algo_bit i2c_core ptp pps_core ioatdma dca wmi ext3(F) jbd(F) mbcache(F) sd_mod(F) crc_t10dif(F) crct10dif_common(F) ahci(F) libahci(F) isci(F) libsas(F) scsi_transport_sas(F) [last unloaded: speedstep_lib] [ 60.782597] CPU: 0 PID: 9430 Comm: iscsi_ttx Tainted: GF 3.12.19+ #2 [ 60.782598] Hardware name: Supermicro X9DRX+-F/X9DRX+-F, BIOS 3.00 07/09/2013 [ 60.782599] 0000000000000035 ffff88044de31d08 ffffffff81553ae7 0000000000000035 [ 60.782602] ffff88044de31d58 ffff88044de31d48 ffffffff8104d1cc 0000000000000002 [ 60.782605] ffff88045b00d180 ffff88045b00d0c0 ffff88045b00d0c0 ffff88044de31e58 [ 60.782607] Call Trace: [ 60.782611] [<ffffffff81553ae7>] dump_stack+0x49/0x62 [ 60.782615] [<ffffffff8104d1cc>] warn_slowpath_common+0x8c/0xc0 [ 60.782618] [<ffffffff8104d2b6>] warn_slowpath_fmt+0x46/0x50 [ 60.782620] [<ffffffff81280933>] __list_del_entry+0x63/0xd0 [ 60.782622] [<ffffffff812809b1>] list_del+0x11/0x40 [ 60.782630] [<ffffffffa06e7cf9>] iscsi_del_ts_from_active_list+0x29/0x50 [iscsi_target_mod] [ 60.782635] [<ffffffffa06e87b1>] iscsi_tx_thread_pre_handler+0xa1/0x180 [iscsi_target_mod] [ 60.782642] [<ffffffffa06fb9ae>] iscsi_target_tx_thread+0x4e/0x220 [iscsi_target_mod] [ 60.782647] [<ffffffffa06fb960>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod] [ 60.782652] [<ffffffffa06fb960>] ? iscsit_handle_snack+0x190/0x190 [iscsi_target_mod] [ 60.782655] [<ffffffff8106f99e>] kthread+0xce/0xe0 [ 60.782657] [<ffffffff8106f8d0>] ? kthread_freezable_should_stop+0x70/0x70 [ 60.782660] [<ffffffff8156026c>] ret_from_fork+0x7c/0xb0 [ 60.782662] [<ffffffff8106f8d0>] ? kthread_freezable_should_stop+0x70/0x70 [ 60.782663] ---[ end trace 9662f4a661d33965 ]--- Since this code is no longer used, go ahead and drop the problematic usage all-together. Reported-by:
Gavin Guo <gavin.guo@canonical.com> Reported-by:
Moussa Ba <moussaba@micron.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Tony Battersby authored
commit 7772855a upstream. With scsi-mq enabled, userspace programs can get unexpected EWOULDBLOCK (a.k.a. EAGAIN) errors when submitting commands to the SCSI generic driver. Fix by calling blk_get_request() with GFP_KERNEL instead of GFP_ATOMIC. Note: to avoid introducing a potential deadlock, this patch should be applied after the patch titled "sg: fix unkillable I/O wait deadlock with scsi-mq". Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Tested-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Tony Battersby authored
commit 7568615c upstream. When using the write()/read() interface for submitting commands, the SCSI generic driver does not call blk_put_request() on a completed SCSI command until userspace calls read() to get the command completion. Since scsi-mq uses a fixed number of preallocated requests, this makes it possible for userspace to exhaust the entire preallocated supply of requests. For places in the kernel that call blk_get_request() with GFP_KERNEL, this can cause the calling process to deadlock in a permanent unkillable I/O wait in blk_get_request() -> ... -> bt_get(). For places in the kernel that call blk_get_request() with GFP_ATOMIC, this can cause blk_get_request() always to return -EWOULDBLOCK. Note that these problems happen only if scsi-mq is enabled. Prevent the problems by calling blk_put_request() as soon as the SCSI command completes instead of waiting for userspace to call read(). Signed-off-by:
-
Trond Myklebust authored
commit d8ba1f97 upstream. If the call to decode_rc_list() fails due to a memory allocation error, then we need to truncate the array size to ensure that we only call kfree() on those pointer that were allocated. Reported-by:
David Ramos <daramos@stanford.edu> Fixes: 4aece6a1 ("nfs41: cb_sequence xdr implementation") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit ea7c38fe upstream. If we have to do a return-on-close in the delegreturn code, then we must ensure that the inode and super block remain referenced. Cc: Peng Tao <tao.peng@primarydata.com> Signed-off-by:
Peng Tao <tao.peng@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 03a9a42a upstream. Fix an Oopsable condition when nsm_mon_unmon is called as part of the namespace cleanup, which now apparently happens after the utsname has been freed. Link: http://lkml.kernel.org/r/20150125220604.090121ae@neptune.homeReported-by:
Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by:
-
Peng Tao authored
commit cb5d04bc upstream. With pgio refactoring in v3.15, .init_read and .init_write can be called with valid pgio->pg_lseg. file layout was fixed at that time by commit c6194271 (pnfs: filelayout: support non page aligned layouts). But the generic helper still needs to be fixed. Signed-off-by:
-
