The Tango thermal driver provides support for the primitive temperature
sensor embedded in Tango chips since the SMP8758.

This sensor only generates a 1-bit signal to indicate whether the die
temperature exceeds a programmable threshold.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

When register sensors into thermal zone during initialization phase, it
reports error for IRQ imbalance enabling:

[    2.040713] WARNING: at kernel/irq/manage.c:513
[    2.040719] Modules linked in:
[    2.040721]
[    2.040729] CPU: 1 PID: 804 Comm: irq/33-hisi_the Not tainted 4.5.0-rc4+ #505
[    2.040732] Hardware name: HiKey Development Board (DT)
[    2.040736] task: ffffffc03ae82580 ti: ffffffc0379c8000 task.ti: ffffffc0379c8000
[    2.040745] PC is at __enable_irq+0x74/0x84
[    2.040749] LR is at __enable_irq+0x74/0x84

This warning is for IRQ imbalance enabling, which is caused by
enable_irq() twice. During sensor's initialization it tries to enable
IRQ, the driver will call thermal_zone_of_sensor_register() to bind
sensors and read sensor's temperature. But at this moment the flag
"data->irq_enabled" has been not initialized as correct state, so it
finally introduces the function enabled_irq() to be called twice. In
essentially this is caused by the flag "data->irq_enabled" is
inconsistent with real hardware IRQ enabling state.

So this patch is to fix this issue, firstly init "irq_enabled" flag
before binding sensors to thermal zone. Also change to use the function
irq_get_irqchip_state() to read back real interrupt line state.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

In current code sensor driver registers all 4 sensors together and if
any of them has not bound to thermal zone successfully then driver will
return failure for driver's initialization. As a result, if DT binds
thermal zone with only one sensor, then the thermal driver will not work
well anymore.

So this patch is to fix this issue. It allows the thermal sensor driver
can register any number sensors at initialization phase, and fix up code
for other related code to skip related sensor's accessing if the sensor
has not been enabled in initialization phase.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

The latest information that I have is that there is no thermal IP
block present on the r8a7794 SoC so remove the corresponding binding.

Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Add suspend/resume function in soctherm driver.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Handle HW initialization in one function soctherm_init(),
so that the codes are more clear.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Handle clock enable/disable codes in one function
soctherm_clk_enable(), so that the codes are more clear.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Add support for hardware critical thermal limits to the
SOC_THERM driver. It use the Linux thermal framework to
create critical trip temp, and set it to SOC_THERM hardware.
If these limits are breached, the chip will reset, and if
appropriately configured, will turn off the PMIC.

This support is critical for safe usage of the chip.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

The "critical" type trip in thermal zone can be
set to SOC_THERM hardware, it can trigger shut down
or reset event from hardware.
Signed-off-by: Wei Ni <wni@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

In current of-thermal, the .set_trip_temp only support to
set trip_temp for SW. But some sensors support to set
trip_temp on hardware, so that can trigger interrupt,
shutdown or any other events.
This patch adds .set_trip_temp() callback in
thermal_zone_of_device_ops{}, so that the sensor device can
use it to set trip_temp on hardware.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Add a debugfs interface to show register contents for debug.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Add Tegra210 specific SOC_THERM driver.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Split most of the Tegra124 data and code into a Tegra124-specific
file.
Split most of the fuse-related code into a fuse-related source file.
This is in preparation for adding a Tegra210-specific driver in a
future patch.

Beyond the maintainability improvements, this is intended to separate
chip-specific ATE and characterization-related hacks into chip-specific
files, in the hopes that they won't pollute code for other chips.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Get rid of T124-specific PDIV/HOTSPOT hack.
tegra-soctherm.c contained a hack to set the SENSOR_PDIV and
SENSOR_HOTSPOT_OFFSET registers - it just did two writes of
T124-specific opaque values.  Convert these into a form that can be
substituted on a per-chip basis, and into structure fields that have
at least some independent meaning.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Combine sensor group-related data structures into struct
tegra_tsensor_group. This provides a single location for
sensor group data storage.
More sensor group data will be added in subsequent patches.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Move Tegra soctherm driver to tegra directory, it's easy to maintain
and add more new function support for Tegra platforms.
This will also help to split soctherm driver into common parts and
chip specific data related parts.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-pm@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Jens Thiele <karme@karme.de>
Cc: linux-input@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: lm-sensors@lm-sensors.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: lm-sensors@lm-sensors.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: lm-sensors@lm-sensors.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

This changes the driver to use the devm_ version
of thermal_zone_of_sensor_register and cleans
up the  local points and unregister calls.

Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: lm-sensors@lm-sensors.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Add myself as a co-maintainer for ti-soc-thermal
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

of_node_put is iterating through all terms in the tbps array even though
the bind has failed. We need to only iterate through the terms that have
already passed the binding step.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ulises Brindis <brindisu@lab126.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

There are several places where the English in the document is syntactically
invalid, or unclear. There are also one or two factual errors.
Reviewed-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Andy Champ <andycham@amazon.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

Pull thermal fixes from Eduardo Valentin:
 "A couple of minor fixes for the thermal subsystem.

  Specifics in this pull request:

   - Fixes in hisilicon thermal driver
   - More fixes of unsigned to int type change in thermal_core.c"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: use %d to print S32 parameters
  thermal: hisilicon: increase temperature resolution

Pull powerpc fixes from Michael Ellerman:
 "A few more powerpc fixes for 4.6:

   - cxl: Keep IRQ mappings on context teardown from Michael Neuling

   - cxl: Poll for outstanding IRQs when detaching a context from
     Michael Neuling

   - Wire up preadv2 and pwritev2 syscalls from Rui Salvaterra"

* tag 'powerpc-4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: wire up preadv2 and pwritev2 syscalls
  cxl: Poll for outstanding IRQs when detaching a context
  cxl: Keep IRQ mappings on context teardown

Pull EDAC fix from Borislav Petkov:
 "Make sure sb_edac and i7core_edac do not terminate MCE processing on
  the decoding callchain prematurely"

* tag 'edac_fix_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: i7core, sb_edac: Don't return NOTIFY_BAD from mce_decoder callback

Pull power management fixes from Rafael Wysocki:
 "One revert of a recent cpufreq commit that introduced a regression and
  a fix for intel_pstate's Turbo Activation Ratio handling code.

  Specifics:

   - Revert cpufreq commit that attempted to fix a problem in the
     ondemand/conservative governor code, but did that incorrectly and
     introduced another problem instead (Rafael Wysocki).

   - Fix incorrect decoding of MSR contents related to the Turbo
     Activation Ratio (TAR) handling in the intel_pstate driver
     (Srinivas Pandruvada)"

* tag 'pm+acpi-4.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: Fix processing for turbo activation ratio
  Revert "cpufreq: governor: Fix negative idle_time when configured with CONFIG_HZ_PERIODIC"

Pull MMC fixes from Ulf Hansson:
 "Here are a two MMC host fixes:

  - sdhci-acpi: Reduce Baytrail eMMC/SD/SDIO hangs

  - sunxi: Disable eMMC HS-DDR for Allwinner A80"

* tag 'mmc-v4.6-rc4' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: sunxi: Disable eMMC HS-DDR (MMC_CAP_1_8V_DDR) for Allwinner A80
  mmc: sdhci-acpi: Reduce Baytrail eMMC/SD/SDIO hangs

Pull drm fixes from Dave Airlie:
 "A few fixes all over the place:

  radeon is probably the biggest standout, it's a fix for screen
  corruption or hung black outputs so I thought it was worth pulling in.

  Otherwise some amdgpu power control fixes, some misc vmwgfx fixes, one
  etnaviv fix, one virtio-gpu fix, two DP MST fixes, and a single TTM
  fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/vmwgfx: Fix order of operation
  drm/vmwgfx: use vmw_cmd_dx_cid_check for query commands.
  drm/vmwgfx: Enable SVGA_3D_CMD_DX_SET_PREDICATION
  drm/amdgpu: disable vm interrupts with vm_fault_stop=2
  drm/amdgpu: print a message if ATPX dGPU power control is missing
  Revert "drm/amdgpu: disable runtime pm on PX laptops without dGPU power control"
  drm/radeon: fix vertical bars appear on monitor (v2)
  drm/ttm: fix kref count mess in ttm_bo_move_to_lru_tail
  drm/virtio: send vblank event after crtc updates
  drm/dp/mst: Restore primary hub guid on resume
  drm/dp/mst: Get validated port ref in drm_dp_update_payload_part1()
  drm/etnaviv: don't move linear memory window on 3D cores without MC2.0

Pull rdma fixes from Doug Ledford:
 "Final set of -rc fixes for 4.6.

  I've collected up a number of patches that are all pretty small with
  the exception of only a couple.  The hfi1 driver has a number of
  important patches, and it is what really drives the line count of this
  pull request up.  These are all small and I've got this kernel built
  and running in the test lab (I have most of the hardware, I think nes
  is the only thing in this patch set that I can't say I've personally
  tested and have up and running).

  Summary:

   - A number of collected fixes for oopses, memory corruptions,
     deadlocks, etc.  All of these fixes are small (many only 5-10
     lines), obvious, and tested.

   - Fix for the security issue related to the use of write for
     bi-directional communications"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  RDMA/nes: don't leak skb if carrier down
  IB/security: Restrict use of the write() interface
  IB/hfi1: Use kernel default llseek for ui device
  IB/hfi1: Don't attempt to free resources if initialization failed
  IB/hfi1: Fix missing lock/unlock in verbs drain callback
  IB/rdmavt: Fix send scheduling
  IB/hfi1: Prevent unpinning of wrong pages
  IB/hfi1: Fix deadlock caused by locking with wrong scope
  IB/hfi1: Prevent NULL pointer deferences in caching code
  MAINTAINERS: Update iser/isert maintainer contact info
  IB/mlx5: Expose correct max_sge_rd limit
  RDMA/iw_cxgb4: Fix bar2 virt addr calculation for T4 chips
  iw_cxgb4: handle draining an idle qp
  iw_cxgb3: initialize ibdev.iwcm->ifname for port mapping
  iw_cxgb4: initialize ibdev.iwcm->ifname for port mapping
  IB/core: Don't drain non-existent rq queue-pair
  IB/core: Fix oops in ib_cache_gid_set_default_gid

Merge fixes from Andrew Morton:
 "20 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  Documentation/sysctl/vm.txt: update numa_zonelist_order description
  lib/stackdepot.c: allow the stack trace hash to be zero
  rapidio: fix potential NULL pointer dereference
  mm/memory-failure: fix race with compound page split/merge
  ocfs2/dlm: return zero if deref_done message is successfully handled
  Ananth has moved
  kcov: don't profile branches in kcov
  kcov: don't trace the code coverage code
  mm: wake kcompactd before kswapd's short sleep
  .mailmap: add Frank Rowand
  mm/hwpoison: fix wrong num_poisoned_pages accounting
  mm: call swap_slot_free_notify() with page lock held
  mm: vmscan: reclaim highmem zone if buffer_heads is over limit
  numa: fix /proc/<pid>/numa_maps for THP
  mm/huge_memory: replace VM_NO_THP VM_BUG_ON with actual VMA check
  mailmap: fix Krzysztof Kozlowski's misspelled name
  thp: keep huge zero page pinned until tlb flush
  mm: exclude HugeTLB pages from THP page_mapped() logic
  kexec: export OFFSET(page.compound_head) to find out compound tail page
  kexec: update VMCOREINFO for compound_order/dtor