- 20 Nov, 2013 4 commits
-
-
Ben Hutchings authored
[ Upstream commit 262e827f ] The length calculation here is now invalid on 32-bit architectures, since sk_buff::tail is a pointer and sk_buff::transport_header is an integer offset: drivers/net/ethernet/chelsio/cxgb3/sge.c: In function 'write_ofld_wr': drivers/net/ethernet/chelsio/cxgb3/sge.c:1603:9: warning: passing argument 4 of 'make_sgl' makes integer from pointer without a cast [enabled by default] adap->pdev); ^ drivers/net/ethernet/chelsio/cxgb3/sge.c:964:28: note: expected 'unsigned int' but argument is of type 'sk_buff_data_t' static inline unsigned int make_sgl(const struct sk_buff *skb, ^ Use the appropriate skb accessor functions. Compile-tested only. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Fixes: 1a37e412 ('net: Use 16bits for *_headers fields of struct skbuff') Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hannes Frederic Sowa authored
[ Upstream commit 01ba16d6 ] On receiving a packet too big icmp error we update the expire value by calling rt6_update_expires. This function uses dst_set_expires which is implemented that it can only reduce the expiration value of the dst entry. If we insert new routing non-expiry information into the ipv6 fib where we already have a matching rt6_info we only clear the RTF_EXPIRES flag in rt6i_flags and leave the dst.expires value as is. When new mtu information arrives for that cached dst_entry we again call dst_set_expires. This time it won't update the dst.expire value because we left the dst.expire value intact from the last update. So dst_set_expires won't touch dst.expires. Fix this by resetting dst.expires when clearing the RTF_EXPIRE flag. dst_set_expires checks for a zero expiration and updates the dst.expires. In the past this (not updating dst.expires) was necessary because dst.expire was placed in a union with the dst_entry *from reference and rt6_clean_expires did assign NULL to it. This split happend in ecd98837 ("ipv6: fix race condition regarding dst->expires and dst->from"). Reported-by:
Steinar H. Gunderson <sgunderson@bigfoot.com> Reported-by:
Valentijn Sessink <valentyn@blub.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by:
Eric Dumazet <edumazet@google.com> Tested-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit e3bc10bd ] On receiving a packet too big icmp error we check if our current cached dst_entry in the socket is still valid. This validation check did not care about the expiration of the (cached) route. The error path I traced down: The socket receives a packet too big mtu notification. It still has a valid dst_entry and thus issues the ip6_rt_pmtu_update on this dst_entry, setting RTF_EXPIRE and updates the dst.expiration value (which could fail because of not up-to-date expiration values, see previous patch). In some seldom cases we race with a) the ip6_fib gc or b) another routing lookup which would result in a recreation of the cached rt6_info from its parent non-cached rt6_info. While copying the rt6_info we reinitialize the metrics store by copying it over from the parent thus invalidating the just installed pmtu update (both dsts use the same key to the inetpeer storage). The dst_entry with the just invalidated metrics data would just get its RTF_EXPIRES flag cleared and would continue to stay valid for the socket. We should have not issued the pmtu update on the already expired dst_entry in the first placed. By checking the expiration on the dst entry and doing a relookup in case it is out of date we close the race because we would install a new rt6_info into the fib before we issue the pmtu update, thus closing this race. Not reliably updating the dst.expire value was fixed by the patch "ipv6: reset dst.expires value when clearing expire flag". Reported-by:
-
Pravin B Shelar authored
[ No applicable upstream commit, the upstream implementation is now completely different and doesn't have this bug. ] In case of WCCPv2 GRE header has extra four bytes. Following patch pull those extra four bytes so that skb offsets are set correctly. CC: Eric Dumazet <eric.dumazet@gmail.com> Reported-by:
Peter Schmitt <peter.schmitt82@yahoo.de> Tested-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
- 13 Nov, 2013 36 commits
-
-
Greg Kroah-Hartman authored
-
Jon Mason authored
commit 1517a3f2 upstream. Debugfs was setup in NTB to only have a single debugfs directory. This resulted in the leaking of debugfs directories and files when multiple NTB devices were present, due to each device stomping on the variables containing the previous device's values (thus preventing them from being freed on cleanup). Correct this by creating a secondary directory of the PCI BDF for each device present, and nesting the previously existing information in those directories. Signed-off-by:
Jon Mason <jon.mason@intel.com> Signed-off-by:
-
Jon Mason authored
commit b6750cfe upstream. Due to ambiguous documentation, the USD/DSD identification is backward when compared to the setting in BIOS. Correct the bits to match the BIOS setting. Signed-off-by:
-
Jon Mason authored
commit 87034511 upstream. The NTB Xeon hardware has 16 scratch pad registers and 16 back-to-back scratch pad registers. Correct the #define to represent this and update the variable names to reflect their usage. Signed-off-by:
-
Jon Mason authored
commit 3b12a0d1 upstream. If an error is encountered in ntb_device_setup, it is possible that the spci_cmd isn't populated. Writes to the offset can result in a NULL pointer dereference. This issue is easily encountered by running in NTB-RP mode, as it currently is not supported and will generate an error. To get around this issue, return if an error is encountered prior to attempting to write to the spci_cmd offset. Signed-off-by:
-
Gu Zheng authored
commit 05e16745 upstream. This issue was first pointed out by Jiaxing Wang several months ago, but no further comments: https://lkml.org/lkml/2013/6/29/41 As we know pread() does not change f_pos, so after pread(), file->f_pos and m->read_pos become different. And seq_lseek() does not update file->f_pos if offset equals to m->read_pos, so after pread() and seq_lseek()(lseek to m->read_pos), then a subsequent read may read from a wrong position, the following program produces the problem: char str1[32] = { 0 }; char str2[32] = { 0 }; int poffset = 10; int count = 20; /*open any seq file*/ int fd = open("/proc/modules", O_RDONLY); pread(fd, str1, count, poffset); printf("pread:%s\n", str1); /*seek to where m->read_pos is*/ lseek(fd, poffset+count, SEEK_SET); /*supposed to read from poffset+count, but this read from position 0*/ read(fd, str2, count); printf("read:%s\n", str2); out put: pread: ck_netbios_ns 12665 read: nf_conntrack_netbios /proc/modules: nf_conntrack_netbios_ns 12665 0 - Live 0xffffffffa038b000 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns, Live 0xffffffffa0386000 So we always update file->f_pos to offset in seq_lseek() to fix this issue. Signed-off-by:
Jiaxing Wang <hello.wjx@gmail.com> Signed-off-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Jonghwan Choi <jhbird.choi@gmail.com> Signed-off-by:
-
Alex Deucher authored
commit c23632d4 upstream. Some rs780 asics seem to be affected as well. See: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=91f3a6aaf280294b07c05dfe606e6c27b7ba3c72 Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60791Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Chris Wilson authored
commit bc5bd37c upstream. Pavel Roskin reported that DRM_IOCTL_MODE_GETCONNECTOR was overwritting the 4 bytes beyond the end of its structure with a 32-bit userspace running on a 64-bit kernel. This is due to the padding gcc inserts as the drm_mode_get_connector struct includes a u64 and its size is not a natural multiple of u64s. 64-bit kernel: sizeof(drm_mode_get_connector)=80, alignof=8 sizeof(drm_mode_get_encoder)=20, alignof=4 sizeof(drm_mode_modeinfo)=68, alignof=4 32-bit userspace: sizeof(drm_mode_get_connector)=76, alignof=4 sizeof(drm_mode_get_encoder)=20, alignof=4 sizeof(drm_mode_modeinfo)=68, alignof=4 Fortuituously we can insert explicit padding to the tail of our structures without breaking ABI. Reported-by:
Pavel Roskin <proski@gnu.org> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Chris Wilson authored
commit b062672e upstream. Apply the protections from commit 1b2f1489 Author: Dave Airlie <airlied@redhat.com> Date: Sat Aug 14 20:20:34 2010 +1000 drm: block userspace under allocating buffer and having drivers overwrite it (v2) to the core ioctl structs as well, for we found one instance where there is a 32-/64-bit size mismatch and were guilty of writing beyond the end of the user's buffer. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Thomas Hellstrom authored
commit c4249855 upstream. DRI clients that tried to grab the TTM lock when the master (X server) was switched away during a VT switch were sent the SIGTERM signal by the kernel. Fix this so that they are only sent that signal when the master has exited. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Jakob Bornecrantz <jakob@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 26682480 upstream. The evict code may try to swap them out causing a BUG in the destroy function. Signed-off-by:
-
Zhang Yanfei authored
commit bcb615a8 upstream. When searching a vmap area in the vmalloc space, we use (addr + size - 1) to check if the value is less than addr, which is an overflow. But we assign (addr + size) to vmap_area->va_end. So if we come across the below case: (addr + size - 1) : not overflow (addr + size) : overflow we will assign an overflow value (e.g 0) to vmap_area->va_end, And this will trigger BUG in __insert_vmap_area, causing system panic. So using (addr + size) to check the overflow should be the correct behaviour, not (addr + size - 1). Signed-off-by:
Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Reported-by:
Ghennadi Procopciuc <unix140@gmail.com> Tested-by:
Daniel Baluta <dbaluta@ixiacom.com> Cc: David Rientjes <rientjes@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Anatoly Muliarski <x86ever@gmail.com> Signed-off-by:
-
Chen LinX authored
commit 3017f079 upstream. When walk_page_range walk a memory map's page tables, it'll skip VM_PFNMAP area, then variable 'next' will to assign to vma->vm_end, it maybe larger than 'end'. In next loop, 'addr' will be larger than 'next'. Then in /proc/XXXX/pagemap file reading procedure, the 'addr' will growing forever in pagemap_pte_range, pte_to_pagemap_entry will access the wrong pte. BUG: Bad page map in process procrank pte:8437526f pmd:785de067 addr:9108d000 vm_flags:00200073 anon_vma:f0d99020 mapping: (null) index:9108d CPU: 1 PID: 4974 Comm: procrank Tainted: G B W O 3.10.1+ #1 Call Trace: dump_stack+0x16/0x18 print_bad_pte+0x114/0x1b0 vm_normal_page+0x56/0x60 pagemap_pte_range+0x17a/0x1d0 walk_page_range+0x19e/0x2c0 pagemap_read+0x16e/0x200 vfs_read+0x84/0x150 SyS_read+0x4a/0x80 syscall_call+0x7/0xb Signed-off-by:
Liu ShuoX <shuox.liu@intel.com> Signed-off-by:
Chen LinX <linx.z.chen@intel.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Mel Gorman authored
commit 0255d491 upstream. A THP PMD update is accounted for as 512 pages updated in vmstat. This is large difference when estimating the cost of automatic NUMA balancing and can be misleading when comparing results that had collapsed versus split THP. This patch addresses the accounting issue. Signed-off-by:
Mel Gorman <mgorman@suse.de> Reviewed-by:
Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1381141781-10992-10-git-send-email-mgorman@suse.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Mel Gorman authored
commit 3f926ab9 upstream. THP migration uses the page lock to guard against parallel allocations but there are cases like this still open Task A Task B --------------------- --------------------- do_huge_pmd_numa_page do_huge_pmd_numa_page lock_page mpol_misplaced == -1 unlock_page goto clear_pmdnuma lock_page mpol_misplaced == 2 migrate_misplaced_transhuge pmd = pmd_mknonnuma set_pmd_at During hours of testing, one crashed with weird errors and while I have no direct evidence, I suspect something like the race above happened. This patch extends the page lock to being held until the pmd_numa is cleared to prevent migration starting in parallel while the pmd_numa is being cleared. It also flushes the old pmd entry and orders pagetable insertion before rmap insertion. Signed-off-by:
-
Mel Gorman authored
commit c61109e3 upstream. There are three callers of task_numa_fault(): - do_huge_pmd_numa_page(): Accounts against the current node, not the node where the page resides, unless we migrated, in which case it accounts against the node we migrated to. - do_numa_page(): Accounts against the current node, not the node where the page resides, unless we migrated, in which case it accounts against the node we migrated to. - do_pmd_numa_page(): Accounts not at all when the page isn't migrated, otherwise accounts against the node we migrated towards. This seems wrong to me; all three sites should have the same sementaics, furthermore we should accounts against where the page really is, we already know where the task is. So modify all three sites to always account; we did after all receive the fault; and always account to where the page is after migration, regardless of success. They all still differ on when they clear the PTE/PMD; ideally that would get sorted too. Signed-off-by:
-
Mel Gorman authored
commit 587fe586 upstream. THP migrations are serialised by the page lock but on its own that does not prevent THP splits. If the page is split during THP migration then the pmd_same checks will prevent page table corruption but the unlock page and other fix-ups potentially will cause corruption. This patch takes the anon_vma lock to prevent parallel splits during migration. Signed-off-by:
-
Mel Gorman authored
commit 42836f5f upstream. The locking for migrating THP is unusual. While normal page migration prevents parallel accesses using a migration PTE, THP migration relies on a combination of the page_table_lock, the page lock and the existance of the NUMA hinting PTE to guarantee safety but there is a bug in the scheme. If a THP page is currently being migrated and another thread traps a fault on the same page it checks if the page is misplaced. If it is not, then pmd_numa is cleared. The problem is that it checks if the page is misplaced without holding the page lock meaning that the racing thread can be migrating the THP when the second thread clears the NUMA bit and faults a stale page. This patch checks if the page is potentially being migrated and stalls using the lock_page if it is potentially being migrated before checking if the page is misplaced or not. Signed-off-by:
-
Mel Gorman authored
commit 1dd49bfa upstream. If another task handled a hinting fault in parallel then do not double account for it. Signed-off-by:
-
Jonathan Austin authored
commit 2f9f64bc upstream. The order of arguments in the call to vco_set() for the ICST clocks appears to have been switched in error, which results in the VCO not being initialised correctly. This in turn stops the integrated LCD on things like Integrator/CP from working correctly. This patch fixes the order and restores the expected functionality. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Jonathan Austin <jonathan.austin@arm.com> Signed-off-by:
Mike Turquette <mturquette@linaro.org> Signed-off-by:
-
Dan Carpenter authored
commit f856567b upstream. In commit d496f94d ('[SCSI] aacraid: fix security weakness') we added a check on CAP_SYS_RAWIO to the ioctl. The compat ioctls need the check as well. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ming Lei authored
commit 3d77b50c upstream. Commit b1adaf65 ("[SCSI] block: add sg buffer copy helper functions") introduces two sg buffer copy helpers, and calls flush_kernel_dcache_page() on pages in SG list after these pages are written to. Unfortunately, the commit may introduce a potential bug: - Before sending some SCSI commands, kmalloc() buffer may be passed to block layper, so flush_kernel_dcache_page() can see a slab page finally - According to cachetlb.txt, flush_kernel_dcache_page() is only called on "a user page", which surely can't be a slab page. - ARCH's implementation of flush_kernel_dcache_page() may use page mapping information to do optimization so page_mapping() will see the slab page, then VM_BUG_ON() is triggered. Aaro Koskinen reported the bug on ARM/kirkwood when DEBUG_VM is enabled, and this patch fixes the bug by adding test of '!PageSlab(miter->page)' before calling flush_kernel_dcache_page(). Signed-off-by:
Ming Lei <ming.lei@canonical.com> Reported-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by:
Simon Baatz <gmbnomis@gmail.com> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Cc: Will Deacon <will.deacon@arm.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Tejun Heo <tj@kernel.org> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Linus Torvalds authored
commit 7314e613 upstream. Nico Golde reports a few straggling uses of [io_]remap_pfn_range() that really should use the vm_iomap_memory() helper. This trivially converts two of them to the helper, and comments about why the third one really needs to continue to use remap_pfn_range(), and adds the missing size check. Reported-by:
Nico Golde <nico@ngolde.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org. Signed-off-by:
-
Al Viro authored
commit 1fca06fa upstream. ... and single return is quite sufficient to get out of function, TYVM Signed-off-by:
-
Al Viro authored
commit c607f450 upstream. Signed-off-by:
-
Uwe Kleine-König authored
commit 7294151d upstream. This makes it possible to let gdb access mappings of the process that is being debugged. uio_mmap_logical was moved and uio_vm_ops renamed to group related code and differentiate to new stuff. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
commit 5a73633e upstream. In the next commit this function will be used in the uio subsystem Signed-off-by:
-
Baruch Siach authored
commit cba9a900 upstream. According to create_thread(3): "The new thread does not inherit the creating thread's alternate signal stack". Since commit f9a3879a (Fix sigaltstack corruption among cloned threads), current->sas_ss_size is set to 0 for cloned processes sharing VM with their parent. Don't use the (nonexistent) alternate signal stack in this case. This has been broken since commit 29c4dfd9 ([XTENSA] Remove non-rt signal handling). Fixes the SA_ONSTACK part of the nptl/tst-cancel20 test from uClibc. Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
Chris Zankel <chris@zankel.net> Signed-off-by:
-
Dan Carpenter authored
commit 201f99f1 upstream. We don't cap the size of buffer from the user so we could write past the end of the array here. Only root can write to this file. Reported-by:
Fabian Yamaguchi <fabs@goesec.de> Signed-off-by:
-
Dan Carpenter authored
commit b5e2f339 upstream. We need to check the length parameter before doing the memcpy(). I've actually changed it to strlcpy() as well so that it's NUL terminated. You need CAP_NET_ADMIN to trigger these so it's not the end of the world. Reported-by:
-
Dan Carpenter authored
commit a8b33654 upstream. The icount.reserved[] array isn't initialized so it leaks stack information to userspace. Reported-by:
-
Dan Carpenter authored
commit 8d1e7225 upstream. The DevInfo.u32Reserved[] array isn't initialized so it leaks kernel information to user space. Reported-by:
-
Dan Carpenter authored
commit c2c65cd2 upstream. We need to check "count" so we don't overflow the ei->data buffer. Reported-by:
-
Takashi Iwai authored
commit ff18620c upstream. ... due to a copy & paste error. Spotted by coverity CID 710923. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Takashi Iwai authored
commit 268ff145 upstream. Spotted by coverity CID 115170. Signed-off-by:
-
Russell King authored
commit a4461f41 upstream. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = d5300000 [00000008] *pgd=0d265831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM CPU: 0 PID: 2295 Comm: vlc Not tainted 3.11.0+ #755 task: dee74800 ti: e213c000 task.ti: e213c000 PC is at snd_pcm_info+0xc8/0xd8 LR is at 0x30232065 pc : [<c031b52c>] lr : [<30232065>] psr: a0070013 sp : e213dea8 ip : d81cb0d0 fp : c05f7678 r10: c05f7770 r9 : fffffdfd r8 : 00000000 r7 : d8a968a8 r6 : d8a96800 r5 : d8a96200 r4 : d81cb000 r3 : 00000000 r2 : d81cb000 r1 : 00000001 r0 : d8a96200 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 15300019 DAC: 00000015 Process vlc (pid: 2295, stack limit = 0xe213c248) [<c031b52c>] (snd_pcm_info) from [<c031b570>] (snd_pcm_info_user+0x34/0x9c) [<c031b570>] (snd_pcm_info_user) from [<c03164a4>] (snd_pcm_control_ioctl+0x274/0x280) [<c03164a4>] (snd_pcm_control_ioctl) from [<c0311458>] (snd_ctl_ioctl+0xc0/0x55c) [<c0311458>] (snd_ctl_ioctl) from [<c00eca84>] (do_vfs_ioctl+0x80/0x31c) [<c00eca84>] (do_vfs_ioctl) from [<c00ecd5c>] (SyS_ioctl+0x3c/0x60) [<c00ecd5c>] (SyS_ioctl) from [<c000e500>] (ret_fast_syscall+0x0/0x48) Code: e1a00005 e59530dc e3a01001 e1a02004 (e5933008) ---[ end trace cb3d9bdb8dfefb3c ]--- This is provoked when the ASoC front end is open along with its backend, (which causes the backend to have a runtime assigned to it) and then the SNDRV_CTL_IOCTL_PCM_INFO is requested for the (visible) backend device. Resolve this by ensuring that ASoC internal backend devices are not visible to userspace, just as the commentry for snd_pcm_new_internal() says it should be. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Acked-by:
-
