- 31 Jan, 2019 40 commits
-
-
Nicolas Pitre authored
commit 0c9b1965 upstream. User space using poll() on /dev/vcs devices are not awaken when a screen size change occurs. Let's fix that. Signed-off-by:
Nicolas Pitre <nico@linaro.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Hartkopp authored
commit 93171ba6 upstream. Kyungtae Kim detected a potential integer overflow in bcm_[rx|tx]_setup() when the conversion into ktime multiplies the given value with NSEC_PER_USEC (1000). Reference: https://marc.info/?l=linux-can&m=154732118819828&w=2 Add a check for the given tv_usec, so that the value stays below one second. Additionally limit the tv_sec value to a reasonable value for CAN related use-cases of 400 days and ensure all values to be positive. Reported-by:
Kyungtae Kim <kt0755@gmail.com> Tested-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Andre Naujoks <nautsch2@gmail.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Manfred Schlaegl authored
commit 7b12c818 upstream. This patch revert commit 7da11ba5 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb") After introduction of this change we encountered following new error message on various i.MX plattforms (flexcan): | flexcan 53fc8000.can can0: __can_get_echo_skb: BUG! Trying to echo non | existing skb: can_priv::echo_skb[0] The introduction of the message was a mistake because priv->echo_skb[idx] = NULL is a perfectly valid in following case: If CAN_RAW_LOOPBACK is disabled (setsockopt) in applications, the pkt_type of the tx skb's given to can_put_echo_skb is set to PACKET_LOOPBACK. In this case can_put_echo_skb will not set priv->echo_skb[idx]. It is therefore kept NULL. As additional argument for revert: The order of check and usage of idx was changed. idx is used to access an array element before checking it's boundaries. Signed-off-by:
Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Fixes: 7da11ba5 ("can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb") Cc: linux-stable <stable@vger.kernel.org> Signed-off-by:
-
Marc Zyngier authored
commit 8208d170 upstream. The way we allocate events works fine in most cases, except when multiple PCI devices share an ITS-visible DevID, and that one of them is trying to use MultiMSI allocation. In that case, our allocation is not guaranteed to be zero-based anymore, and we have to make sure we allocate it on a boundary that is compatible with the PCI Multi-MSI constraints. Fix this by allocating the full region upfront instead of iterating over the number of MSIs. MSI-X are always allocated one by one, so this shouldn't change anything on that front. Fixes: b48ac83d ("irqchip: GICv3: ITS: MSI support") Cc: stable@vger.kernel.org Reported-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Thomas Gleixner authored
commit 93ad0fc0 upstream. The recent commit which prevented a division by 0 issue in the alarm timer code broke posix CPU timers as an unwanted side effect. The reason is that the common rearm code checks for timer->it_interval being 0 now. What went unnoticed is that the posix cpu timer setup does not initialize timer->it_interval as it stores the interval in CPU timer specific storage. The reason for the separate storage is historical as the posix CPU timers always had a 64bit nanoseconds representation internally while timer->it_interval is type ktime_t which used to be a modified timespec representation on 32bit machines. Instead of reverting the offending commit and fixing the alarmtimer issue in the alarmtimer code, store the interval in timer->it_interval at CPU timer setup time so the common code check works. This also repairs the existing inconistency of the posix CPU timer code which kept a single shot timer armed despite of the interval being 0. The separate storage can be removed in mainline, but that needs to be a separate commit as the current one has to be backported to stable kernels. Fixes: 0e334db6 ("posix-timers: Fix division by zero bug") Reported-by:
H.J. Lu <hjl.tools@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190111133500.840117406@linutronix.deSigned-off-by:
-
Daniel Drake authored
commit 7e6fc2f5 upstream. The outb() function takes parameters value and port, in that order. Fix the parameters used in the kalsr i8254 fallback code. Fixes: 5bfce5ef ("x86, kaslr: Provide randomness functions") Signed-off-by:
Daniel Drake <drake@endlessm.com> Signed-off-by:
-
Dave Hansen authored
commit e1812933 upstream. There was a bug where the per-mm pkey state was not being preserved across fork() in the child. fork() is performed in the pkey selftests, but all of the pkey activity is performed in the parent. The child does not perform any actions sensitive to pkey state. To make the test more sensitive to these kinds of bugs, add a fork() where the parent exits, and execution continues in the child. To achieve this let the key exhaustion test not terminate at the first allocation failure and fork after 2*NR_PKEYS loops and continue in the child. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
Dave Hansen authored
commit a31e184e upstream. Memory protection key behavior should be the same in a child as it was in the parent before a fork. But, there is a bug that resets the state in the child at fork instead of preserving it. The creation of new mm's is a bit convoluted. At fork(), the code does: 1. memcpy() the parent mm to initialize child 2. mm_init() to initalize some select stuff stuff 3. dup_mmap() to create true copies that memcpy() did not do right For pkeys two bits of state need to be preserved across a fork: 'execute_only_pkey' and 'pkey_allocation_map'. Those are preserved by the memcpy(), but mm_init() invokes init_new_context() which overwrites 'execute_only_pkey' and 'pkey_allocation_map' with "new" values. The author of the code erroneously believed that init_new_context is *only* called at execve()-time. But, alas, init_new_context() is used at execve() and fork(). The result is that, after a fork(), the child's pkey state ends up looking like it does after an execve(), which is totally wrong. pkeys that are already allocated can be allocated again, for instance. To fix this, add code called by dup_mmap() to copy the pkey state from parent to child explicitly. Also add a comment above init_new_context() to make it more clear to the next poor sod what this code is used for. Fixes: e8c24d3a ("x86/pkeys: Allocation/free syscalls") Signed-off-by:
-
Alexander Popov authored
commit 5cc244a2 upstream. The single-step debugging of KVM guests on x86 is broken: if we run gdb 'stepi' command at the breakpoint when the guest interrupts are enabled, RIP always jumps to native_apic_mem_write(). Then other nasty effects follow. Long investigation showed that on Jun 7, 2017 the commit c8401dda ("KVM: x86: fix singlestepping over syscall") introduced the kvm_run.debug corruption: kvm_vcpu_do_singlestep() can be called without X86_EFLAGS_TF set. Let's fix it. Please consider that for -stable. Signed-off-by:
Alexander Popov <alex.popov@linux.com> Cc: stable@vger.kernel.org Fixes: c8401dda ("KVM: x86: fix singlestepping over syscall") Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Milan Broz authored
commit 1856b9f7 upstream. The dm-crypt cipher specification in a mapping table is defined as: cipher[:keycount]-chainmode-ivmode[:ivopts] or (new crypt API format): capi:cipher_api_spec-ivmode[:ivopts] For ESSIV, the parameter includes hash specification, for example: aes-cbc-essiv:sha256 The implementation expected that additional IV option to never include another dash '-' character. But, with SHA3, there are names like sha3-256; so the mapping table parser fails: dmsetup create test --table "0 8 crypt aes-cbc-essiv:sha3-256 9c1185a5c5e9fc54612808977ee8f5b9e 0 /dev/sdb 0" or (new crypt API format) dmsetup create test --table "0 8 crypt capi:cbc(aes)-essiv:sha3-256 9c1185a5c5e9fc54612808977ee8f5b9e 0 /dev/sdb 0" device-mapper: crypt: Ignoring unexpected additional cipher options device-mapper: table: 253:0: crypt: Error creating IV device-mapper: ioctl: error adding target to table Fix the dm-crypt constructor to ignore additional dash in IV options and also remove a bogus warning (that is ignored anyway). Cc: stable@vger.kernel.org # 4.12+ Signed-off-by:
Milan Broz <gmazyland@gmail.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Joe Thornber authored
commit d445bd9c upstream. Commit 00a0ea33 ("dm thin: do not queue freed thin mapping for next stage processing") changed process_prepared_discard_passdown_pt1() to increment all the blocks being discarded until after the passdown had completed to avoid them being prematurely reused. IO issued to a thin device that breaks sharing with a snapshot, followed by a discard issued to snapshot(s) that previously shared the block(s), results in passdown_double_checking_shared_status() being called to iterate through the blocks double checking their reference count is zero and issuing the passdown if so. So a side effect of commit 00a0ea33 is passdown_double_checking_shared_status() was broken. Fix this by checking if the block reference count is greater than 1. Also, rename dm_pool_block_is_used() to dm_pool_block_is_shared(). Fixes: 00a0ea33 ("dm thin: do not queue freed thin mapping for next stage processing") Cc: stable@vger.kernel.org # 4.9+ Reported-by: ryan.p.norwood@gmail.com Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
-
Dan Williams authored
commit 11189c10 upstream. The _DSM function number validation only happens to succeed when the generic Linux command number translation corresponds with a DSM-family-specific function number. This breaks NVDIMM-N implementations that correctly implement _LSR, _LSW, and _LSI, but do not happen to publish support for DSM function numbers 4, 5, and 6. Recall that the support for _LS{I,R,W} family of methods results in the DIMM being marked as supporting those command numbers at acpi_nfit_register_dimms() time. The DSM function mask is only used for ND_CMD_CALL support of non-NVDIMM_FAMILY_INTEL devices. Fixes: 31eca76b ("nfit, libnvdimm: limited/whitelisted dimm command...") Cc: <stable@vger.kernel.org> Link: https://github.com/pmem/ndctl/issues/78Reported-by:
Sujith Pandel <sujith_pandel@dell.com> Tested-by:
Vishal Verma <vishal.l.verma@intel.com> Reviewed-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dan Williams authored
commit 5e9e38d0 upstream. In preparation for using function number 0 as an error value, prevent it from being considered a valid function value by acpi_nfit_ctl(). Cc: <stable@vger.kernel.org> Cc: stuart hayes <stuart.w.hayes@gmail.com> Fixes: e02fb726 ("nfit: add Microsoft NVDIMM DSM command set...") Reported-by:
-
Dmitry Torokhov authored
commit d77651a2 upstream. An integer overflow may arise in uinput_validate_absinfo() if "max - min" can't be represented by an "int". We should check for overflow before trying to use the result. Reported-by:
Peter Hutterer <peter.hutterer@who-t.net> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Rasmus Villemoes authored
commit f0907827 upstream. This adds wrappers for the __builtin overflow checkers present in gcc 5.1+ as well as fallback implementations for earlier compilers. It's not that easy to implement the fully generic __builtin_X_overflow(T1 a, T2 b, T3 *d) in macros, so the fallback code assumes that T1, T2 and T3 are the same. We obviously don't want the wrappers to have different semantics depending on $GCC_VERSION, so we also insist on that even when using the builtins. There are a few problems with the 'a+b < a' idiom for checking for overflow: For signed types, it relies on undefined behaviour and is not actually complete (it doesn't check underflow; e.g. INT_MIN+INT_MIN == 0 isn't caught). Due to type promotion it is wrong for all types (signed and unsigned) narrower than int. Similarly, when a and b does not have the same type, there are subtle cases like u32 a; if (a + sizeof(foo) < a) return -EOVERFLOW; a += sizeof(foo); where the test is always false on 64 bit platforms. Add to that that it is not always possible to determine the types involved at a glance. The new overflow.h is somewhat bulky, but that's mostly a result of trying to be type-generic, complete (e.g. catching not only overflow but also signed underflow) and not relying on undefined behaviour. Linus is of course right [1] that for unsigned subtraction a-b, the right way to check for overflow (underflow) is "b > a" and not "__builtin_sub_overflow(a, b, &d)", but that's just one out of six cases covered here, and included mostly for completeness. So is it worth it? I think it is, if nothing else for the documentation value of seeing if (check_add_overflow(a, b, &d)) return -EGOAWAY; do_stuff_with(d); instead of the open-coded (and possibly wrong and/or incomplete and/or UBsan-tickling) if (a+b < a) return -EGOAWAY; do_stuff_with(a+b); While gcc does recognize the 'a+b < a' idiom for testing unsigned add overflow, it doesn't do nearly as good for unsigned multiplication (there's also no single well-established idiom). So using check_mul_overflow in kcalloc and friends may also make gcc generate slightly better code. [1] https://lkml.org/lkml/2015/11/2/658Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Tom Panfil authored
commit fe2bfd0d upstream. Add support for the SteelSeries Stratus Duo, a wireless Xbox 360 controller. The Stratus Duo ships with a USB dongle to enable wireless connectivity, but it can also function as a wired controller by connecting it directly to a PC via USB, hence the need for two USD PIDs. 0x1430 is the dongle, and 0x1431 is the controller. Signed-off-by:
Tom Panfil <tom@steelseries.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Pavel Shilovsky authored
commit ef68e831 upstream. When executing add_credits() we currently call cifs_reconnect() if the number of credits is zero and there are no requests in flight. In this case we may call cifs_reconnect() recursively twice and cause memory corruption given the following sequence of functions: mid1.callback() -> add_credits() -> cifs_reconnect() -> -> mid2.callback() -> add_credits() -> cifs_reconnect(). Fix this by avoiding to call cifs_reconnect() in add_credits() and checking for zero credits in the demultiplex thread. Cc: <stable@vger.kernel.org> Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Pavel Shilovsky authored
commit ec678eae upstream. We do need to account for credits received in error responses to read requests on encrypted sessions. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Pavel Shilovsky authored
commit 8004c78c upstream. Currently we mark MID as malformed if we get an error from server in a read response. This leads to not properly processing credits in the readv callback. Fix this by marking such a response as normal received response and process it appropriately. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Pavel Shilovsky authored
commit acc58d0b upstream. When doing MTU i/o we need to leave some credits for possible reopen requests and other operations happening in parallel. Currently we leave 1 credit which is not enough even for reopen only: we need at least 2 credits if durable handle reconnect fails. Also there may be other operations at the same time including compounding ones which require 3 credits at a time each. Fix this by leaving 8 credits which is big enough to cover most scenarios. Was able to reproduce this when server was configured to give out fewer credits than usual. The proper fix would be to reconnect a file handle first and then obtain credits for an MTU request but this leads to bigger code changes and should happen in other patches. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dexuan Cui authored
commit ba50bf1c upstream. fc96df16 is good and can already fix the "return stack garbage" issue, but let's also improve hv_ringbuffer_get_debuginfo(), which would silently return stack garbage, if people forget to check channel->state or ring_info->ring_buffer, when using the function in the future. Having an error check in the function would eliminate the potential risk. Add a Fixes tag to indicate the patch depdendency. Fixes: fc96df16 ("Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels") Cc: stable@vger.kernel.org Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Vitaly Kuznetsov authored
commit da8ced36 upstream. Hyper-V memory hotplug protocol has 2M granularity and in Linux x86 we use 128M. To deal with it we implement partial section onlining by registering custom page onlining callback (hv_online_page()). Later, when more memory arrives we try to online the 'tail' (see hv_bring_pgs_online()). It was found that in some cases this 'tail' onlining causes issues: BUG: Bad page state in process kworker/0:2 pfn:109e3a page:ffffe08344278e80 count:0 mapcount:1 mapping:0000000000000000 index:0x0 flags: 0xfffff80000000() raw: 000fffff80000000 dead000000000100 dead000000000200 0000000000000000 raw: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 page dumped because: nonzero mapcount ... Workqueue: events hot_add_req [hv_balloon] Call Trace: dump_stack+0x5c/0x80 bad_page.cold.112+0x7f/0xb2 free_pcppages_bulk+0x4b8/0x690 free_unref_page+0x54/0x70 hv_page_online_one+0x5c/0x80 [hv_balloon] hot_add_req.cold.24+0x182/0x835 [hv_balloon] ... Turns out that we now have deferred struct page initialization for memory hotplug so e.g. memory_block_action() in drivers/base/memory.c does pages_correctly_probed() check and in that check it avoids inspecting struct pages and checks sections instead. But in Hyper-V balloon driver we do PageReserved(pfn_to_page()) check and this is now wrong. Switch to checking online_section_nr() instead. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@kernel.org Signed-off-by:
-
Paul Fulghum authored
commit fc01d8c6 upstream. Fix __might_sleep warning[1] in tty/n_hdlc.c read due to copy_to_user call while current is TASK_INTERRUPTIBLE. This is a false positive since the code path does not depend on current state remaining TASK_INTERRUPTIBLE. The loop breaks out and sets TASK_RUNNING after calling copy_to_user. This patch supresses the warning by setting TASK_RUNNING before calling copy_to_user. [1] https://syzkaller.appspot.com/bug?id=17d5de7f1fcab794cb8c40032f893f52de899324Signed-off-by:
Paul Fulghum <paulkf@microgate.com> Reported-by:
syzbot <syzbot+c244af085a0159d22879@syzkaller.appspotmail.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable <stable@vger.kernel.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Samir Virmani authored
commit aff9cf59 upstream. We were experiencing a crash similar to the one reported as part of commit:a5ba1d95 ("uart: fix race between uart_put_char() and uart_shutdown()") in our testbed as well. We continue to observe the same crash after integrating the commit a5ba1d95 ("uart: fix race between uart_put_char() and uart_shutdown()") On reviewing the change, the port lock should be taken prior to checking for if (!circ->buf) in fn. __uart_put_char and other fns. that update the buffer uart_state->xmit. Traceback: [11/27/2018 06:24:32.4870] Unable to handle kernel NULL pointer dereference at virtual address 0000003b [11/27/2018 06:24:32.4950] PC is at memcpy+0x48/0x180 [11/27/2018 06:24:32.4950] LR is at uart_write+0x74/0x120 [11/27/2018 06:24:32.4950] pc : [<ffffffc0002e6808>] lr : [<ffffffc0003747cc>] pstate: 000001c5 [11/27/2018 06:24:32.4950] sp : ffffffc076433d30 [11/27/2018 06:24:32.4950] x29: ffffffc076433d30 x28: 0000000000000140 [11/27/2018 06:24:32.4950] x27: ffffffc0009b9d5e x26: ffffffc07ce36580 [11/27/2018 06:24:32.4950] x25: 0000000000000000 x24: 0000000000000140 [11/27/2018 06:24:32.4950] x23: ffffffc000891200 x22: ffffffc01fc34000 [11/27/2018 06:24:32.4950] x21: 0000000000000fff x20: 0000000000000076 [11/27/2018 06:24:32.4950] x19: 0000000000000076 x18: 0000000000000000 [11/27/2018 06:24:32.4950] x17: 000000000047cf08 x16: ffffffc000099e68 [11/27/2018 06:24:32.4950] x15: 0000000000000018 x14: 776d726966205948 [11/27/2018 06:24:32.4950] x13: 50203a6c6974755f x12: 74647075205d3333 [11/27/2018 06:24:32.4950] x11: 3a35323a36203831 x10: 30322f37322f3131 [11/27/2018 06:24:32.4950] x9 : 5b205d303638342e x8 : 746164206f742070 [11/27/2018 06:24:32.4950] x7 : 7520736920657261 x6 : 000000000000003b [11/27/2018 06:24:32.4950] x5 : 000000000000817a x4 : 0000000000000008 [11/27/2018 06:24:32.4950] x3 : 2f37322f31312a5b x2 : 000000000000006e [11/27/2018 06:24:32.4950] x1 : ffffffc0009b9cf0 x0 : 000000000000003b [11/27/2018 06:24:32.4950] CPU2: stopping [11/27/2018 06:24:32.4950] CPU: 2 PID: 0 Comm: swapper/2 Tainted: P D O 4.1.51 #3 [11/27/2018 06:24:32.4950] Hardware name: Broadcom-v8A (DT) [11/27/2018 06:24:32.4950] Call trace: [11/27/2018 06:24:32.4950] [<ffffffc0000883b8>] dump_backtrace+0x0/0x150 [11/27/2018 06:24:32.4950] [<ffffffc00008851c>] show_stack+0x14/0x20 [11/27/2018 06:24:32.4950] [<ffffffc0005ee810>] dump_stack+0x90/0xb0 [11/27/2018 06:24:32.4950] [<ffffffc00008e844>] handle_IPI+0x18c/0x1a0 [11/27/2018 06:24:32.4950] [<ffffffc000080c68>] gic_handle_irq+0x88/0x90 Fixes: a5ba1d95 ("uart: fix race between uart_put_char() and uart_shutdown()") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Samir Virmani <samir@embedur.com> Acked-by:
Tycho Andersen <tycho@tycho.ws> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 27cfb3a5 upstream. Some tty line disciplines do not have a receive buf callback, so properly check for that before calling it. If they do not have this callback, just eat the character quietly, as we can't fail this call. Reported-by:
Jann Horn <jannh@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Michael Straube authored
commit 5f74a8cb upstream. This device was added to the stand-alone driver on github. Add it to the staging driver as well. Link: https://github.com/lwfinger/rtl8188eu/commit/a0619a07cd1eSigned-off-by:
Michael Straube <straube.linux@gmail.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 701956d4 upstream. ipcnum is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/char/mwave/mwavedd.c:299 mwave_ioctl() warn: potential spectre issue 'pDrvData->IPCs' [w] (local cap) Fix this by sanitizing ipcnum before using it to index pDrvData->IPCs. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gerald Schaefer authored
commit b7cb707c upstream. smp_rescan_cpus() is called without the device_hotplug_lock, which can lead to a dedlock when a new CPU is found and immediately set online by a udev rule. This was observed on an older kernel version, where the cpu_hotplug_begin() loop was still present, and it resulted in hanging chcpu and systemd-udev processes. This specific deadlock will not show on current kernels. However, there may be other possible deadlocks, and since smp_rescan_cpus() can still trigger a CPU hotplug operation, the device_hotplug_lock should be held. For reference, this was the deadlock with the old cpu_hotplug_begin() loop: chcpu (rescan) systemd-udevd echo 1 > /sys/../rescan -> smp_rescan_cpus() -> (*) get_online_cpus() (increases refcount) -> smp_add_present_cpu() (new CPU found) -> register_cpu() -> device_add() -> udev "add" event triggered -----------> udev rule sets CPU online -> echo 1 > /sys/.../online -> lock_device_hotplug_sysfs() (this is missing in rescan path) -> device_online() -> (**) device_lock(new CPU dev) -> cpu_up() -> cpu_hotplug_begin() (loops until refcount == 0) -> deadlock with (*) -> bus_probe_device() -> device_attach() -> device_lock(new CPU dev) -> deadlock with (**) Fix this by taking the device_hotplug_lock in the CPU rescan path. Cc: <stable@vger.kernel.org> Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Christian Borntraeger authored
commit 03aa047e upstream. Right now the early machine detection code check stsi 3.2.2 for "KVM" and set MACHINE_IS_VM if this is different. As the console detection uses diagnose 8 if MACHINE_IS_VM returns true this will crash Linux early for any non z/VM system that sets a different value than KVM. So instead of assuming z/VM, do not set any of MACHINE_IS_LPAR, MACHINE_IS_VM, or MACHINE_IS_KVM. CC: stable@vger.kernel.org Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Eugeniy Paltsev authored
commit 3affbf0e upstream. So far we've mapped branches to "ijmp" which also counts conditional branches NOT taken. This makes us different from other architectures such as ARM which seem to be counting only taken branches. So use "ijmptak" hardware condition which only counts (all jump instructions that are taken) 'ijmptak' event is available on both ARCompact and ARCv2 ISA based cores. Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked changelog] Signed-off-by:
-
Eugeniy Paltsev authored
commit a3010a04 upstream. In setup_arch_memory we reserve the memory area wherein the kernel is located. Current implementation may reserve more memory than it actually required in case of CONFIG_LINUX_LINK_BASE is not equal to CONFIG_LINUX_RAM_BASE. This happens because we calculate start of the reserved region relatively to the CONFIG_LINUX_RAM_BASE and end of the region relatively to the CONFIG_LINUX_RAM_BASE. For example in case of HSDK board we wasted 256MiB of physical memory: ------------------->8------------------------------ Memory: 770416K/1048576K available (5496K kernel code, 240K rwdata, 1064K rodata, 2200K init, 275K bss, 278160K reserved, 0K cma-reserved) ------------------->8------------------------------ Fix that. Fixes: 9ed68785 ("ARC: mm: Decouple RAM base address from kernel link addr") Cc: stable@vger.kernel.org #4.14+ Signed-off-by:
-
Eugeniy Paltsev authored
commit e6a72b7d upstream. ARCv2 optimized memset uses PREFETCHW instruction for prefetching the next cache line but doesn't ensure that the line is not past the end of the buffer. PRETECHW changes the line ownership and marks it dirty, which can cause issues in SMP config when next line was already owned by other core. Fix the issue by avoiding the PREFETCHW Some more details: The current code has 3 logical loops (ignroing the unaligned part) (a) Big loop for doing aligned 64 bytes per iteration with PREALLOC (b) Loop for 32 x 2 bytes with PREFETCHW (c) any left over bytes loop (a) was already eliding the last 64 bytes, so PREALLOC was safe. The fix was removing PREFETCW from (b). Another potential issue (applicable to configs with 32 or 128 byte L1 cache line) is that PREALLOC assumes 64 byte cache line and may not do the right thing specially for 32b. While it would be easy to adapt, there are no known configs with those lie sizes, so for now, just compile out PREALLOC in such cases. Signed-off-by:
-
Anthony Wong authored
commit 69939038 upstream. Support speaker and mic mute LEDs on HP ProBook 470 G5. BugLink: https://bugs.launchpad.net/bugs/1811254Signed-off-by:
Anthony Wong <anthony.wong@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 060d0bf4 upstream. There is a potential NULL pointer dereference in case devm_kzalloc() fails and returns NULL. Fix this by adding a NULL check on rt5514_dsp. This issue was detected with the help of Coccinelle. Fixes: 6eebf35b ("ASoC: rt5514: add rt5514 SPI driver") Cc: stable@vger.kernel.org Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Kangjie Lu authored
commit 44fabd8c upstream. snd_pcm_lib_malloc_pages() may fail, so let's check its status and return its error code upstream. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Charles Yeh authored
commit 4dcf9ddc upstream. Add new PID to support PL2303TB (TYPE_HX) Signed-off-by:
Charles Yeh <charlesyeh522@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Max Schulze authored
commit b81c2c33 upstream. Add new Motorola Tetra device id for Motorola Solutions TETRA PEI device T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0cad ProdID=9016 Rev=24.16 S: Manufacturer=Motorola Solutions, Inc. S: Product=TETRA PEI interface C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb_serial_simple Signed-off-by:
Max Schulze <max.schulze@posteo.de> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Tomas Winkler authored
commit f7ee8ead upstream. Add the Denverton innovation engine (IE) device ids. The IE is an ME-like device which provides HW security offloading. Cc: <stable@vger.kernel.org> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
-
Vijay Viswanath authored
commit 99d570da upstream. Enable CONFIG_MMC_SDHCI_IO_ACCESSORS so that SDHC controller specific register read and write APIs, if registered, can be used. Signed-off-by:
Vijay Viswanath <vviswana@codeaurora.org> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Cc: Koen Vandeputte <koen.vandeputte@ncentric.com> Cc: Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit f6f2a4a2 ] Setting the low threshold to 0 has no effect on frags allocation, we need to clear high_thresh instead. The code was pre-existent to commit 648700f7 ("inet: frags: use rhashtables for reassembly units"), but before the above, such assignment had a different role: prevent concurrent eviction from the worker and the netns cleanup helper. Fixes: 648700f7 ("inet: frags: use rhashtables for reassembly units") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
