Eric Dumazet says:

====================
net/sched: two fixes for cls_u32

One syzbot report brought my attention to cls_u32.

This series addresses the syzbot report, and an additional
issue discovered in code review.
====================

Link: https://lore.kernel.org/r/20220413173542.533060-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

While investigating a related syzbot report,
I found that whenever call to tcf_exts_init()
from u32_init_knode() is failing, we end up
with an elevated refcount on ht->refcnt

To avoid that, only increase the refcount after
all possible errors have been evaluated.

Fixes: b9a24bb7 ("net_sched: properly handle failure case of tcf_exts_init()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We are now able to detect extra put_net() at the moment
they happen, instead of much later in correct code paths.

u32_init_knode() / tcf_exts_init() populates the ->exts.net
pointer, but as mentioned in tcf_exts_init(),
the refcount on netns has not been elevated yet.

The refcount is taken only once tcf_exts_get_net()
is called.

So the two u32_destroy_key() calls from u32_change()
are attempting to release an invalid reference on the netns.

syzbot report:

refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 21708 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 21708 Comm: syz-executor.5 Not tainted 5.18.0-rc2-next-20220412-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 14 b6 b2 09 31 ff 89 de e8 6d e9 89 fd 84 db 75 e0 e8 84 e5 89 fd 48 c7 c7 40 aa 26 8a c6 05 f4 b5 b2 09 01 e8 e5 81 2e 05 <0f> 0b eb c4 e8 68 e5 89 fd 0f b6 1d e3 b5 b2 09 31 ff 89 de e8 38
RSP: 0018:ffffc900051af1b0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff8160a0c8 RDI: fffff52000a35e28
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff81604a9e R11: 0000000000000000 R12: 1ffff92000a35e3b
R13: 00000000ffffffef R14: ffff8880211a0194 R15: ffff8880577d0a00
FS:  00007f25d183e700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f19c859c028 CR3: 0000000051009000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __refcount_dec include/linux/refcount.h:344 [inline]
 refcount_dec include/linux/refcount.h:359 [inline]
 ref_tracker_free+0x535/0x6b0 lib/ref_tracker.c:118
 netns_tracker_free include/net/net_namespace.h:327 [inline]
 put_net_track include/net/net_namespace.h:341 [inline]
 tcf_exts_put_net include/net/pkt_cls.h:255 [inline]
 u32_destroy_key.isra.0+0xa7/0x2b0 net/sched/cls_u32.c:394
 u32_change+0xe01/0x3140 net/sched/cls_u32.c:909
 tc_new_tfilter+0x98d/0x2200 net/sched/cls_api.c:2148
 rtnetlink_rcv_msg+0x80d/0xb80 net/core/rtnetlink.c:6016
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2495
 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
 netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:725
 ____sys_sendmsg+0x6e2/0x800 net/socket.c:2413
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f25d0689049
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f25d183e168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f25d079c030 RCX: 00007f25d0689049
RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000005
RBP: 00007f25d06e308d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffd0b752e3f R14: 00007f25d183e300 R15: 0000000000022000
 </TASK>

Fixes: 35c55fc1 ("cls_u32: use tcf_exts_get_net() before call_rcu()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-04-13

This series contains updates to igc and e1000e drivers.

Sasha removes waiting for hardware semaphore as it could cause an
infinite loop and changes usleep_range() calls done under atomic
context to udelay() for igc. For e1000e, he changes some variables from
u16 to u32 to prevent possible overflow of values.

Vinicius disables PTM when going to suspend as it is causing hang issues
on some platforms for igc.

* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  e1000e: Fix possible overflow in LTR decoding
  igc: Fix suspending when PTM is active
  igc: Fix BUG: scheduling while atomic
  igc: Fix infinite loop in release_swfw_sync
====================

Link: https://lore.kernel.org/r/20220413170814.2066855-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The displayed list of Ethernet devices in make menuconfig
has gotten out of order. This is mostly due to changes in vendor
names etc, but also because of new Microsoft entry in wrong place.

This restores so that the display is in order even if the names
of the sub directories are not.

Fixes: ca9c54d2 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Given a sufficiently large number of actions, while copying and
reserving memory for a new action of a new flow, if next_offset is
greater than MAX_ACTIONS_BUFSIZE, the function reserve_sfa_size() does
not return -EMSGSIZE as expected, but it allocates MAX_ACTIONS_BUFSIZE
bytes increasing actions_len by req_size. This can then lead to an OOB
write access, especially when further actions need to be copied.

Fix it by rearranging the flow action size check.

KASAN splat below:

==================================================================
BUG: KASAN: slab-out-of-bounds in reserve_sfa_size+0x1ba/0x380 [openvswitch]
Write of size 65360 at addr ffff888147e4001c by task handler15/836

CPU: 1 PID: 836 Comm: handler15 Not tainted 5.18.0-rc1+ #27
...
Call Trace:
 <TASK>
 dump_stack_lvl+0x45/0x5a
 print_report.cold+0x5e/0x5db
 ? __lock_text_start+0x8/0x8
 ? reserve_sfa_size+0x1ba/0x380 [openvswitch]
 kasan_report+0xb5/0x130
 ? reserve_sfa_size+0x1ba/0x380 [openvswitch]
 kasan_check_range+0xf5/0x1d0
 memcpy+0x39/0x60
 reserve_sfa_size+0x1ba/0x380 [openvswitch]
 __add_action+0x24/0x120 [openvswitch]
 ovs_nla_add_action+0xe/0x20 [openvswitch]
 ovs_ct_copy_action+0x29d/0x1130 [openvswitch]
 ? __kernel_text_address+0xe/0x30
 ? unwind_get_return_address+0x56/0xa0
 ? create_prof_cpu_mask+0x20/0x20
 ? ovs_ct_verify+0xf0/0xf0 [openvswitch]
 ? prep_compound_page+0x198/0x2a0
 ? __kasan_check_byte+0x10/0x40
 ? kasan_unpoison+0x40/0x70
 ? ksize+0x44/0x60
 ? reserve_sfa_size+0x75/0x380 [openvswitch]
 __ovs_nla_copy_actions+0xc26/0x2070 [openvswitch]
 ? __zone_watermark_ok+0x420/0x420
 ? validate_set.constprop.0+0xc90/0xc90 [openvswitch]
 ? __alloc_pages+0x1a9/0x3e0
 ? __alloc_pages_slowpath.constprop.0+0x1da0/0x1da0
 ? unwind_next_frame+0x991/0x1e40
 ? __mod_node_page_state+0x99/0x120
 ? __mod_lruvec_page_state+0x2e3/0x470
 ? __kasan_kmalloc_large+0x90/0xe0
 ovs_nla_copy_actions+0x1b4/0x2c0 [openvswitch]
 ovs_flow_cmd_new+0x3cd/0xb10 [openvswitch]
 ...

Cc: stable@vger.kernel.org
Fixes: f28cd2af ("openvswitch: fix flow actions reallocation")
Signed-off-by: Paolo Valerio <pvalerio@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Feng reported an skb_under_panic BUG triggered by running
test_ip6gretap() in tools/testing/selftests/bpf/test_tunnel.sh:

[   82.492551] skbuff: skb_under_panic: text:ffffffffb268bb8e len:403 put:12 head:ffff9997c5480000 data:ffff9997c547fff8 tail:0x18b end:0x2c0 dev:ip6gretap11
<...>
[   82.607380] Call Trace:
[   82.609389]  <TASK>
[   82.611136]  skb_push.cold.109+0x10/0x10
[   82.614289]  __gre6_xmit+0x41e/0x590
[   82.617169]  ip6gre_tunnel_xmit+0x344/0x3f0
[   82.620526]  dev_hard_start_xmit+0xf1/0x330
[   82.623882]  sch_direct_xmit+0xe4/0x250
[   82.626961]  __dev_queue_xmit+0x720/0xfe0
<...>
[   82.633431]  packet_sendmsg+0x96a/0x1cb0
[   82.636568]  sock_sendmsg+0x30/0x40
<...>

The following sequence of events caused the BUG:

1. During ip6gretap device initialization, tunnel->tun_hlen (e.g. 4) is
   calculated based on old flags (see ip6gre_calc_hlen());
2. packet_snd() reserves header room for skb A, assuming
   tunnel->tun_hlen is 4;
3. Later (in clsact Qdisc), the eBPF program sets a new tunnel key for
   skb A using bpf_skb_set_tunnel_key() (see _ip6gretap_set_tunnel());
4. __gre6_xmit() detects the new tunnel key, and recalculates
   "tun_hlen" (e.g. 12) based on new flags (e.g. TUNNEL_KEY and
   TUNNEL_SEQ);
5. gre_build_header() calls skb_push() with insufficient reserved header
   room, triggering the BUG.

As sugguested by Cong, fix it by moving the call to skb_cow_head() after
the recalculation of tun_hlen.

Reproducer:

  OBJ=$LINUX/tools/testing/selftests/bpf/test_tunnel_kern.o

  ip netns add at_ns0
  ip link add veth0 type veth peer name veth1
  ip link set veth0 netns at_ns0
  ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0
  ip netns exec at_ns0 ip link set dev veth0 up
  ip link set dev veth1 up mtu 1500
  ip addr add dev veth1 172.16.1.200/24

  ip netns exec at_ns0 ip addr add ::11/96 dev veth0
  ip netns exec at_ns0 ip link set dev veth0 up
  ip addr add dev veth1 ::22/96
  ip link set dev veth1 up

  ip netns exec at_ns0 \
  	ip link add dev ip6gretap00 type ip6gretap seq flowlabel 0xbcdef key 2 \
  	local ::11 remote ::22

  ip netns exec at_ns0 ip addr add dev ip6gretap00 10.1.1.100/24
  ip netns exec at_ns0 ip addr add dev ip6gretap00 fc80::100/96
  ip netns exec at_ns0 ip link set dev ip6gretap00 up

  ip link add dev ip6gretap11 type ip6gretap external
  ip addr add dev ip6gretap11 10.1.1.200/24
  ip addr add dev ip6gretap11 fc80::200/24
  ip link set dev ip6gretap11 up

  tc qdisc add dev ip6gretap11 clsact
  tc filter add dev ip6gretap11 egress bpf da obj $OBJ sec ip6gretap_set_tunnel
  tc filter add dev ip6gretap11 ingress bpf da obj $OBJ sec ip6gretap_get_tunnel

  ping6 -c 3 -w 10 -q ::11

Fixes: 6712abc1 ("ip6_gre: add ip6 gre and gretap collect_md mode")
Reported-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Co-developed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do not update tunnel->tun_hlen in data plane code.  Use a local variable
instead, just like "tunnel_hlen" in net/ipv4/ip_gre.c:gre_fb_xmit().
Co-developed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-04-14

This series contains updates to ice driver only.

Maciej adjusts implementation in __ice_alloc_rx_bufs_zc() for when
ice_fill_rx_descs() does not return the entire buffer request and fixes a
return value for !CONFIG_NET_SWITCHDEV configuration which was preventing
VF creation.

Wojciech prevents eswitch transmit when VFs are being removed which was
causing NULL pointer dereference.

Jianglei Nie fixes a memory leak on error path of getting OROM data.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2022-04-14

1) Fix the output interface for VRF cases in xfrm_dst_lookup.
   From David Ahern.

2) Fix write out of bounds by doing COW on esp output when the
   packet size is larger than a page.
   From Sabrina Dubroca.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

packet_sock xmit could be dev_queue_xmit, which also returns negative
errors. So only checking positive errors is not enough, or userspace
sendmsg may return success while packet is not send out.

Move the net_xmit_errno() assignment in the braces as checkpatch.pl said
do not use assignment in if condition.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit e5d5aadc ("net/smc: fix sk_refcnt underflow on linkdown
and fallback"), for a fallback connection, __smc_release() does not call
sock_put() if its state is already SMC_CLOSED.

When calling smc_shutdown() after falling back, its state is set to
SMC_CLOSED but does not call sock_put(), so this patch calls it.

Reported-and-tested-by: syzbot+6e29a053eb165bd50de5@syzkaller.appspotmail.com
Fixes: e5d5aadc ("net/smc: fix sk_refcnt underflow on linkdown and fallback")
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A recent patch[1] from Eric Dumazet flipped the order in which the
keepalive timer and the keepalive worker were cancelled in order to fix a
syzbot reported issue[2].  Unfortunately, this enables the mirror image bug
whereby the timer races with rxrpc_exit_net(), restarting the worker after
it has been cancelled:

	CPU 1		CPU 2
	===============	=====================
			if (rxnet->live)
			<INTERRUPT>
	rxnet->live = false;
 	cancel_work_sync(&rxnet->peer_keepalive_work);
			rxrpc_queue_work(&rxnet->peer_keepalive_work);
	del_timer_sync(&rxnet->peer_keepalive_timer);

Fix this by restoring the removed del_timer_sync() so that we try to remove
the timer twice.  If the timer runs again, it should see ->live == false
and not restart the worker.

Fixes: 1946014c ("rxrpc: fix a race in rxrpc_exit_net()")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Eric Dumazet <edumazet@google.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/20220404183439.3537837-1-eric.dumazet@gmail.com/ [1]
Link: https://syzkaller.appspot.com/bug?extid=724378c4bb58f703b09a [2]
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added the phy_poll_cable_test flag for the lan937x phy driver.
Tested using command -  ethtool --cable-test <dev>

Fixes: 680baca5 ("net: phy: added the LAN937x phy support")
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Paolo Abeni:
 "Including fixes from wireless and netfilter.

  Current release - regressions:

   - smc: fix af_ops of child socket pointing to released memory

   - wifi: ath9k: fix usage of driver-private space in tx_info

  Previous releases - regressions:

   - ipv6: fix panic when forwarding a pkt with no in6 dev

   - sctp: use the correct skb for security_sctp_assoc_request

   - smc: fix NULL pointer dereference in smc_pnet_find_ib()

   - sched: fix initialization order when updating chain 0 head

   - phy: don't defer probe forever if PHY IRQ provider is missing

   - dsa: revert "net: dsa: setup master before ports"

   - dsa: felix: fix tagging protocol changes with multiple CPU ports

   - eth: ice:
      - fix use-after-free when freeing @rx_cpu_rmap
      - revert "iavf: fix deadlock occurrence during resetting VF
        interface"

   - eth: lan966x: stop processing the MAC entry is port is wrong

  Previous releases - always broken:

   - sched:
      - flower: fix parsing of ethertype following VLAN header
      - taprio: check if socket flags are valid

   - nfc: add flush_workqueue to prevent uaf

   - veth: ensure eth header is in skb's linear part

   - eth: stmmac: fix altr_tse_pcs function when using a fixed-link

   - eth: macb: restart tx only if queue pointer is lagging

   - eth: macvlan: fix leaking skb in source mode with nodst option"

* tag 'net-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
  net: bcmgenet: Revert "Use stronger register read/writes to assure ordering"
  rtnetlink: Fix handling of disabled L3 stats in RTM_GETSTATS replies
  net: dsa: felix: fix tagging protocol changes with multiple CPU ports
  tun: annotate access to queue->trans_start
  nfc: nci: add flush_workqueue to prevent uaf
  net: dsa: realtek: don't parse compatible string for RTL8366S
  net: dsa: realtek: fix Kconfig to assure consistent driver linkage
  net: ftgmac100: access hardware register after clock ready
  Revert "net: dsa: setup master before ports"
  macvlan: Fix leaking skb in source mode with nodst option
  netfilter: nf_tables: nft_parse_register can return a negative value
  net: lan966x: Stop processing the MAC entry is port is wrong.
  net: lan966x: Fix when a port's upper is changed.
  net: lan966x: Fix IGMP snooping when frames have vlan tag
  net: lan966x: Update lan966x_ptp_get_nominal_value
  sctp: Initialize daddr on peeled off socket
  net/smc: Fix af_ops of child socket pointing to released memory
  net/smc: Fix NULL pointer dereference in smc_pnet_find_ib()
  net/smc: use memcpy instead of snprintf to avoid out of bounds read
  net: macb: Restart tx only if queue pointer is lagging
  ...

Pull sound fixes from Takashi Iwai:
 "This became an unexpectedly large pull request due to various
  regression fixes in the previous kernels.

  The majority of fixes are a series of patches to address the
  regression at probe errors in devres'ed drivers, while there are yet
  more fixes for the x86 SG allocations and for USB-audio buffer
  management. In addition, a few HD-audio quirks and other small fixes
  are found"

* tag 'sound-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (52 commits)
  ALSA: usb-audio: Limit max buffer and period sizes per time
  ALSA: memalloc: Add fallback SG-buffer allocations for x86
  ALSA: nm256: Don't call card private_free at probe error path
  ALSA: mtpav: Don't call card private_free at probe error path
  ALSA: rme9652: Fix the missing snd_card_free() call at probe error
  ALSA: hdspm: Fix the missing snd_card_free() call at probe error
  ALSA: hdsp: Fix the missing snd_card_free() call at probe error
  ALSA: oxygen: Fix the missing snd_card_free() call at probe error
  ALSA: lx6464es: Fix the missing snd_card_free() call at probe error
  ALSA: cmipci: Fix the missing snd_card_free() call at probe error
  ALSA: aw2: Fix the missing snd_card_free() call at probe error
  ALSA: als300: Fix the missing snd_card_free() call at probe error
  ALSA: lola: Fix the missing snd_card_free() call at probe error
  ALSA: bt87x: Fix the missing snd_card_free() call at probe error
  ALSA: sis7019: Fix the missing error handling
  ALSA: intel_hdmi: Fix the missing snd_card_free() call at probe error
  ALSA: via82xx: Fix the missing snd_card_free() call at probe error
  ALSA: sonicvibes: Fix the missing snd_card_free() call at probe error
  ALSA: rme96: Fix the missing snd_card_free() call at probe error
  ALSA: rme32: Fix the missing snd_card_free() call at probe error
  ...

Pull btrfs fixes from David Sterba:
 "A few more code and warning fixes.

  There's one feature ioctl removal patch slated for 5.18 that did not
  make it to the main pull request. It's just a one-liner and the ioctl
  has a v2 that's in use for a long time, no point to postpone it to
  5.19.

  Late update:

   - remove balance v1 ioctl, superseded by v2 in 2012

  Fixes:

   - add back cgroup attribution for compressed writes

   - add super block write start/end annotations to asynchronous balance

   - fix root reference count on an error handling path

   - in zoned mode, activate zone at the chunk allocation time to avoid
     ENOSPC due to timing issues

   - fix delayed allocation accounting for direct IO

  Warning fixes:

   - simplify assertion condition in zoned check

   - remove an unused variable"

* tag 'for-5.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix btrfs_submit_compressed_write cgroup attribution
  btrfs: fix root ref counts in error handling in btrfs_get_root_ref
  btrfs: zoned: activate block group only for extent allocation
  btrfs: return allocated block group from do_chunk_alloc()
  btrfs: mark resumed async balance as writing
  btrfs: remove support of balance v1 ioctl
  btrfs: release correct delalloc amount in direct IO write path
  btrfs: remove unused variable in btrfs_{start,write}_dirty_block_groups()
  btrfs: zoned: remove redundant condition in btrfs_run_delalloc_range

Merge tag 'fscache-fixes-20220413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull fscache fixes from David Howells:
 "Here's a collection of fscache and cachefiles fixes and misc small
  cleanups. The two main fixes are:

   - Add a missing unmark of the inode in-use mark in an error path.

   - Fix a KASAN slab-out-of-bounds error when setting the xattr on a
     cachefiles volume due to the wrong length being given to memcpy().

  In addition, there's the removal of an unused parameter, removal of an
  unused Kconfig option, conditionalising a bit of procfs-related stuff
  and some doc fixes"

* tag 'fscache-fixes-20220413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  fscache: remove FSCACHE_OLD_API Kconfig option
  fscache: Use wrapper fscache_set_cache_state() directly when relinquishing
  fscache: Move fscache_cookies_seq_ops specific code under CONFIG_PROC_FS
  fscache: Remove the cookie parameter from fscache_clear_page_bits()
  docs: filesystems: caching/backend-api.rst: fix an object withdrawn API
  docs: filesystems: caching/backend-api.rst: correct two relinquish APIs use
  cachefiles: Fix KASAN slab-out-of-bounds in cachefiles_set_volume_xattr
  cachefiles: unmark inode in use in error path

A memory chunk was allocated for orom_data in ice_get_orom_civd_data()
by vzmalloc(). But when ice_read_flash_module() fails, the allocated
memory is not freed, which will lead to a memory leak.

We can fix it by freeing the orom_data when ce_read_flash_module() fails.

Fixes: af18d886 ("ice: reduce time to read Option ROM CIVD data")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Below steps end up with crash:
- modprobe ice
- devlink dev eswitch set $PF1_PCI mode switchdev
- echo 64 > /sys/class/net/$PF1/device/sriov_numvfs
- rmmod ice

Calling ice_eswitch_port_start_xmit while the process of removing
VFs is in progress ends up with NULL pointer dereference.
That's because PR netdev is not released but some resources
are already freed. Fix it by checking if ICE_VF_DIS bit is set.

Call trace:
[ 1379.595146] BUG: kernel NULL pointer dereference, address: 0000000000000040
[ 1379.595284] #PF: supervisor read access in kernel mode
[ 1379.595410] #PF: error_code(0x0000) - not-present page
[ 1379.595535] PGD 0 P4D 0
[ 1379.595657] Oops: 0000 [#1] PREEMPT SMP PTI
[ 1379.595783] CPU: 4 PID: 974 Comm: NetworkManager Kdump: loaded Tainted: G           OE     5.17.0-rc8_mrq_dev-queue+ #12
[ 1379.595926] Hardware name: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.03.01.0042.013020190050 01/30/2019
[ 1379.596063] RIP: 0010:ice_eswitch_port_start_xmit+0x46/0xd0 [ice]
[ 1379.596292] Code: c7 c8 09 00 00 e8 9a c9 fc ff 84 c0 0f 85 82 00 00 00 4c 89 e7 e8 ca 70 fe ff 48 8b 7d 58 48 89 c3 48 85 ff 75 5e 48 8b 53 20 <8b> 42 40 85 c0 74 78 8d 48 01 f0 0f b1 4a 40 75 f2 0f b6 95 84 00
[ 1379.596456] RSP: 0018:ffffaba0c0d7bad0 EFLAGS: 00010246
[ 1379.596584] RAX: ffff969c14c71680 RBX: ffff969c14c71680 RCX: 000100107a0f0000
[ 1379.596715] RDX: 0000000000000000 RSI: ffff969b9d631000 RDI: 0000000000000000
[ 1379.596846] RBP: ffff969c07b46500 R08: ffff969becfca8ac R09: 0000000000000001
[ 1379.596977] R10: 0000000000000004 R11: ffffaba0c0d7bbec R12: ffff969b9d631000
[ 1379.597106] R13: ffffffffc08357a0 R14: ffff969c07b46500 R15: ffff969b9d631000
[ 1379.597237] FS:  00007f72c0e25c80(0000) GS:ffff969f13500000(0000) knlGS:0000000000000000
[ 1379.597414] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1379.597562] CR2: 0000000000000040 CR3: 000000012b316006 CR4: 00000000003706e0
[ 1379.597713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1379.597863] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1379.598015] Call Trace:
[ 1379.598153]  <TASK>
[ 1379.598294]  dev_hard_start_xmit+0xd9/0x220
[ 1379.598444]  sch_direct_xmit+0x8a/0x340
[ 1379.598592]  __dev_queue_xmit+0xa3c/0xd30
[ 1379.598739]  ? packet_parse_headers+0xb4/0xf0
[ 1379.598890]  packet_sendmsg+0xa15/0x1620
[ 1379.599038]  ? __check_object_size+0x46/0x140
[ 1379.599186]  sock_sendmsg+0x5e/0x60
[ 1379.599330]  ____sys_sendmsg+0x22c/0x270
[ 1379.599474]  ? import_iovec+0x17/0x20
[ 1379.599622]  ? sendmsg_copy_msghdr+0x59/0x90
[ 1379.599771]  ___sys_sendmsg+0x81/0xc0
[ 1379.599917]  ? __pollwait+0xd0/0xd0
[ 1379.600061]  ? preempt_count_add+0x68/0xa0
[ 1379.600210]  ? _raw_write_lock_irq+0x1a/0x40
[ 1379.600369]  ? ep_done_scan+0xc9/0x110
[ 1379.600494]  ? _raw_spin_unlock_irqrestore+0x25/0x40
[ 1379.600622]  ? preempt_count_add+0x68/0xa0
[ 1379.600747]  ? _raw_spin_lock_irq+0x1a/0x40
[ 1379.600899]  ? __fget_light+0x8f/0x110
[ 1379.601024]  __sys_sendmsg+0x49/0x80
[ 1379.601148]  ? release_ds_buffers+0x50/0xe0
[ 1379.601274]  do_syscall_64+0x3b/0x90
[ 1379.601399]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 1379.601525] RIP: 0033:0x7f72c1e2e35d

Fixes: f5396b8a ("ice: switchdev slow path")
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reported-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Currently for !CONFIG_NET_SWITCHDEV kernel builds it is not possible to
create VFs properly as call to ice_eswitch_configure() returns
-EOPNOTSUPP for us. This is because CONFIG_ICE_SWITCHDEV depends on
CONFIG_NET_SWITCHDEV.

Change the ice_eswitch_configure() implementation for
!CONFIG_ICE_SWITCHDEV to return 0 instead -EOPNOTSUPP and let
ice_ena_vfs() finish its work properly.

CC: Grzegorz Nitka <grzegorz.nitka@intel.com>
Fixes: 1a1c40df ("ice: set and release switchdev environment")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

__ice_alloc_rx_bufs_zc() checks if a number of the descriptors to be
allocated would cause the ring wrap. In that case, driver will issue two
calls to xsk_buff_alloc_batch() - one that will fill the ring up to the
end and the second one that will start with filling descriptors from the
beginning of the ring.

ice_fill_rx_descs() is a wrapper for taking care of what
xsk_buff_alloc_batch() gave back to the driver. It works in a best
effort approach, so for example when driver asks for 64 buffers,
ice_fill_rx_descs() could assign only 32. Such case needs to be checked
when ring is being filled up to the end, because in that situation ntu
might not reached the end of the ring.

Fix the ring wrap by checking if nb_buffs_extra has the expected value.
If not, bump ntu and go directly to tail update.

Fixes: 3876ff52 ("ice: xsk: Handle SW XDP ring wrap and bump tail more often")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Shwetha Nagaraju <Shwetha.nagaraju@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

It turns out after digging deeper into this bug, that it was being
triggered by GCC12 failing to call the bcmgenet_enable_dma()
routine. Given that a gcc12 fix has been merged [1] and the genet
driver now works properly when built with gcc12, this commit should
be reverted.

[1]
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105160
https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=aabb9a261ef060cf24fd626713f1d7d9df81aa57

Fixes: 8d3ea3d4 ("net: bcmgenet: Use stronger register read/writes to assure ordering")
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220412210420.1129430-1-jeremy.linton@arm.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When L3 stats are disabled, rtnl_offload_xstats_get_size_stats() returns
size of 0, which is supposed to be an indication that the corresponding
attribute should not be emitted. However, instead, the current code
reserves a 0-byte attribute.

The reason this does not show up as a citation on a kasan kernel is that
netdev_offload_xstats_get(), which is supposed to fill in the data, never
ends up getting called, because rtnl_offload_xstats_get_stats() notices
that the stats are not actually used and skips the call.

Thus a zero-length IFLA_OFFLOAD_XSTATS_L3_STATS attribute ends up in a
response, confusing the userspace.

Fix by skipping the L3-stats related block in rtnl_offload_xstats_fill().

Fixes: 0e7788fd ("net: rtnetlink: Add UAPI for obtaining L3 offload xstats")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/591b58e7623edc3eb66dd1fcfa8c8f133d090974.1649794741.git.petrm@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When the device tree has 2 CPU ports defined, a single one is active
(has any dp->cpu_dp pointers point to it). Yet the second one is still a
CPU port, and DSA still calls ->change_tag_protocol on it.

On the NXP LS1028A, the CPU ports are ports 4 and 5. Port 4 is the
active CPU port and port 5 is inactive.

After the following commands:

 # Initial setting
 cat /sys/class/net/eno2/dsa/tagging
 ocelot
 echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging
 echo ocelot > /sys/class/net/eno2/dsa/tagging

traffic is now broken, because the driver has moved the NPI port from
port 4 to port 5, unbeknown to DSA.

The problem can be avoided by detecting that the second CPU port is
unused, and not doing anything for it. Further rework will be needed
when proper support for multiple CPU ports is added.

Treat this as a bug and prepare current kernels to work in single-CPU
mode with multiple-CPU DT blobs.

Fixes: adb3dccf ("net: dsa: felix: convert to the new .change_tag_protocol DSA API")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220412172209.2531865-1-vladimir.oltean@nxp.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Commit 5337824f ("net: annotate accesses to queue->trans_start")
introduced a new helper, txq_trans_cond_update, to update
queue->trans_start using WRITE_ONCE. One snippet in drivers/net/tun.c
was missed, as it was introduced roughly at the same time.

Fixes: 5337824f ("net: annotate accesses to queue->trans_start")
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220412135852.466386-1-atenart@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When we decode the latency and the max_latency, u16 value may not fit
the required size and could lead to the wrong LTR representation.

Scaling is represented as:
scale 0 - 1         (2^(5*0)) = 2^0
scale 1 - 32        (2^(5 *1))= 2^5
scale 2 - 1024      (2^(5 *2)) =2^10
scale 3 - 32768     (2^(5 *3)) =2^15
scale 4 - 1048576   (2^(5 *4)) = 2^20
scale 5 - 33554432  (2^(5 *4)) = 2^25
scale 4 and scale 5 required 20 and 25 bits respectively.
scale 6 reserved.

Replace the u16 type with the u32 type and allow corrected LTR
representation.

Cc: stable@vger.kernel.org
Fixes: 44a13a5d ("e1000e: Fix the max snoop/no-snoop latency for 10M")
Reported-by: James Hutchinson <jahutchinson99@googlemail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215689Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Tested-by: James Hutchinson <jahutchinson99@googlemail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Some mainboard/CPU combinations, in particular, Alder Lake-S with a
W680 mainboard, have shown problems (system hangs usually, no kernel
logs) with suspend/resume when PCIe PTM is enabled and active. In some
cases, it could be reproduced when removing the igc module.

The best we can do is to stop PTM dialogs from the downstream/device
side before the interface is brought down. PCIe PTM will be re-enabled
when the interface is being brought up.

Fixes: a90ec848 ("igc: Add support for PTP getcrosststamp()")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Replace usleep_range() method with udelay() method to allow atomic contexts
in low-level MDIO access functions.

The following issue can be seen by doing the following:
$ modprobe -r bonding
$ modprobe -v bonding max_bonds=1 mode=1 miimon=100 use_carrier=0
$ ip link set bond0 up
$ ifenslave bond0 eth0 eth1

[  982.357308] BUG: scheduling while atomic: kworker/u64:0/9/0x00000002
[  982.364431] INFO: lockdep is turned off.
[  982.368824] Modules linked in: bonding sctp ip6_udp_tunnel udp_tunnel mlx4_ib ib_uverbs ib_core mlx4_en mlx4_core nfp tls sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support mxm_wmi dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate intel_uncore pcspkr lpc_ich mei_me ipmi_ssif mei ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci crc32c_intel libata i2c_algo_bit tg3 megaraid_sas igc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: bonding]
[  982.437941] CPU: 25 PID: 9 Comm: kworker/u64:0 Kdump: loaded Tainted: G        W        --------- -  - 4.18.0-348.el8.x86_64+debug #1
[  982.451333] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 2.7.0 12/005/2017
[  982.459791] Workqueue: bond0 bond_mii_monitor [bonding]
[  982.465622] Call Trace:
[  982.468355]  dump_stack+0x8e/0xd0
[  982.472056]  __schedule_bug.cold.60+0x3a/0x60
[  982.476919]  __schedule+0x147b/0x1bc0
[  982.481007]  ? firmware_map_remove+0x16b/0x16b
[  982.485967]  ? hrtimer_fixup_init+0x40/0x40
[  982.490625]  schedule+0xd9/0x250
[  982.494227]  schedule_hrtimeout_range_clock+0x10d/0x2c0
[  982.500058]  ? hrtimer_nanosleep_restart+0x130/0x130
[  982.505598]  ? hrtimer_init_sleeper_on_stack+0x90/0x90
[  982.511332]  ? usleep_range+0x88/0x130
[  982.515514]  ? recalibrate_cpu_khz+0x10/0x10
[  982.520279]  ? ktime_get+0xab/0x1c0
[  982.524175]  ? usleep_range+0x88/0x130
[  982.528355]  usleep_range+0xdd/0x130
[  982.532344]  ? console_conditional_schedule+0x30/0x30
[  982.537987]  ? igc_put_hw_semaphore+0x17/0x60 [igc]
[  982.543432]  igc_read_phy_reg_gpy+0x111/0x2b0 [igc]
[  982.548887]  igc_phy_has_link+0xfa/0x260 [igc]
[  982.553847]  ? igc_get_phy_id+0x210/0x210 [igc]
[  982.558894]  ? lock_acquire+0x34d/0x890
[  982.563187]  ? lock_downgrade+0x710/0x710
[  982.567659]  ? rcu_read_unlock+0x50/0x50
[  982.572039]  igc_check_for_copper_link+0x106/0x210 [igc]
[  982.577970]  ? igc_config_fc_after_link_up+0x840/0x840 [igc]
[  982.584286]  ? rcu_read_unlock+0x50/0x50
[  982.588661]  ? lock_release+0x591/0xb80
[  982.592939]  ? lock_release+0x591/0xb80
[  982.597220]  igc_has_link+0x113/0x330 [igc]
[  982.601887]  ? lock_downgrade+0x710/0x710
[  982.606362]  igc_ethtool_get_link+0x6d/0x90 [igc]
[  982.611614]  bond_check_dev_link+0x131/0x2c0 [bonding]
[  982.617350]  ? bond_time_in_interval+0xd0/0xd0 [bonding]
[  982.623277]  ? rcu_read_lock_held+0x62/0xc0
[  982.627944]  ? rcu_read_lock_sched_held+0xe0/0xe0
[  982.633198]  bond_mii_monitor+0x314/0x2500 [bonding]
[  982.638738]  ? lock_contended+0x880/0x880
[  982.643214]  ? bond_miimon_link_change+0xa0/0xa0 [bonding]
[  982.649336]  ? lock_acquire+0x34d/0x890
[  982.653615]  ? lock_downgrade+0x710/0x710
[  982.658089]  ? debug_object_deactivate+0x221/0x340
[  982.663436]  ? rcu_read_unlock+0x50/0x50
[  982.667811]  ? debug_print_object+0x2b0/0x2b0
[  982.672672]  ? __switch_to_asm+0x41/0x70
[  982.677049]  ? __switch_to_asm+0x35/0x70
[  982.681426]  ? _raw_spin_unlock_irq+0x24/0x40
[  982.686288]  ? trace_hardirqs_on+0x20/0x195
[  982.690956]  ? _raw_spin_unlock_irq+0x24/0x40
[  982.695818]  process_one_work+0x8f0/0x1770
[  982.700390]  ? pwq_dec_nr_in_flight+0x320/0x320
[  982.705443]  ? debug_show_held_locks+0x50/0x50
[  982.710403]  worker_thread+0x87/0xb40
[  982.714489]  ? process_one_work+0x1770/0x1770
[  982.719349]  kthread+0x344/0x410
[  982.722950]  ? kthread_insert_work_sanity_check+0xd0/0xd0
[  982.728975]  ret_from_fork+0x3a/0x50

Fixes: 5586838f ("igc: Add code for PHY support")
Reported-by: Corinna Vinschen <vinschen@redhat.com>
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Corinna Vinschen <vinschen@redhat.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

An infinite loop may occur if we fail to acquire the HW semaphore,
which is needed for resource release.
This will typically happen if the hardware is surprise-removed.
At this stage there is nothing to do, except log an error and quit.

Fixes: c0071c7a ("igc: Add HW initialization code")
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Our detector found a concurrent use-after-free bug when detaching an
NCI device. The main reason for this bug is the unexpected scheduling
between the used delayed mechanism (timer and workqueue).

The race can be demonstrated below:

Thread-1                           Thread-2
                                 | nci_dev_up()
                                 |   nci_open_device()
                                 |     __nci_request(nci_reset_req)
                                 |       nci_send_cmd
                                 |         queue_work(cmd_work)
nci_unregister_device()          |
  nci_close_device()             | ...
    del_timer_sync(cmd_timer)[1] |
...                              | Worker
nci_free_device()                | nci_cmd_work()
  kfree(ndev)[3]                 |   mod_timer(cmd_timer)[2]

In short, the cleanup routine thought that the cmd_timer has already
been detached by [1] but the mod_timer can re-attach the timer [2], even
it is already released [3], resulting in UAF.

This UAF is easy to trigger, crash trace by POC is like below

[   66.703713] ==================================================================
[   66.703974] BUG: KASAN: use-after-free in enqueue_timer+0x448/0x490
[   66.703974] Write of size 8 at addr ffff888009fb7058 by task kworker/u4:1/33
[   66.703974]
[   66.703974] CPU: 1 PID: 33 Comm: kworker/u4:1 Not tainted 5.18.0-rc2 #5
[   66.703974] Workqueue: nfc2_nci_cmd_wq nci_cmd_work
[   66.703974] Call Trace:
[   66.703974]  <TASK>
[   66.703974]  dump_stack_lvl+0x57/0x7d
[   66.703974]  print_report.cold+0x5e/0x5db
[   66.703974]  ? enqueue_timer+0x448/0x490
[   66.703974]  kasan_report+0xbe/0x1c0
[   66.703974]  ? enqueue_timer+0x448/0x490
[   66.703974]  enqueue_timer+0x448/0x490
[   66.703974]  __mod_timer+0x5e6/0xb80
[   66.703974]  ? mark_held_locks+0x9e/0xe0
[   66.703974]  ? try_to_del_timer_sync+0xf0/0xf0
[   66.703974]  ? lockdep_hardirqs_on_prepare+0x17b/0x410
[   66.703974]  ? queue_work_on+0x61/0x80
[   66.703974]  ? lockdep_hardirqs_on+0xbf/0x130
[   66.703974]  process_one_work+0x8bb/0x1510
[   66.703974]  ? lockdep_hardirqs_on_prepare+0x410/0x410
[   66.703974]  ? pwq_dec_nr_in_flight+0x230/0x230
[   66.703974]  ? rwlock_bug.part.0+0x90/0x90
[   66.703974]  ? _raw_spin_lock_irq+0x41/0x50
[   66.703974]  worker_thread+0x575/0x1190
[   66.703974]  ? process_one_work+0x1510/0x1510
[   66.703974]  kthread+0x2a0/0x340
[   66.703974]  ? kthread_complete_and_exit+0x20/0x20
[   66.703974]  ret_from_fork+0x22/0x30
[   66.703974]  </TASK>
[   66.703974]
[   66.703974] Allocated by task 267:
[   66.703974]  kasan_save_stack+0x1e/0x40
[   66.703974]  __kasan_kmalloc+0x81/0xa0
[   66.703974]  nci_allocate_device+0xd3/0x390
[   66.703974]  nfcmrvl_nci_register_dev+0x183/0x2c0
[   66.703974]  nfcmrvl_nci_uart_open+0xf2/0x1dd
[   66.703974]  nci_uart_tty_ioctl+0x2c3/0x4a0
[   66.703974]  tty_ioctl+0x764/0x1310
[   66.703974]  __x64_sys_ioctl+0x122/0x190
[   66.703974]  do_syscall_64+0x3b/0x90
[   66.703974]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[   66.703974]
[   66.703974] Freed by task 406:
[   66.703974]  kasan_save_stack+0x1e/0x40
[   66.703974]  kasan_set_track+0x21/0x30
[   66.703974]  kasan_set_free_info+0x20/0x30
[   66.703974]  __kasan_slab_free+0x108/0x170
[   66.703974]  kfree+0xb0/0x330
[   66.703974]  nfcmrvl_nci_unregister_dev+0x90/0xd0
[   66.703974]  nci_uart_tty_close+0xdf/0x180
[   66.703974]  tty_ldisc_kill+0x73/0x110
[   66.703974]  tty_ldisc_hangup+0x281/0x5b0
[   66.703974]  __tty_hangup.part.0+0x431/0x890
[   66.703974]  tty_release+0x3a8/0xc80
[   66.703974]  __fput+0x1f0/0x8c0
[   66.703974]  task_work_run+0xc9/0x170
[   66.703974]  exit_to_user_mode_prepare+0x194/0x1a0
[   66.703974]  syscall_exit_to_user_mode+0x19/0x50
[   66.703974]  do_syscall_64+0x48/0x90
[   66.703974]  entry_SYSCALL_64_after_hwframe+0x44/0xae

To fix the UAF, this patch adds flush_workqueue() to ensure the
nci_cmd_work is finished before the following del_timer_sync.
This combination will promise the timer is actually detached.

Fixes: 6a2968aa ("NFC: basic NCI protocol implementation")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This switch is not even supported, but if someone were to actually put
this compatible string "realtek,rtl8366s" in their device tree, they
would be greeted with a kernel panic because the probe function would
dereference NULL. So let's just remove it.

Link: https://lore.kernel.org/all/CACRpkdYdKZs0WExXc3=0yPNOwP+oOV60HRz7SRoGjZvYHaT=1g@mail.gmail.com/Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The kernel test robot reported a build failure:

or1k-linux-ld: drivers/net/dsa/realtek/realtek-smi.o:(.rodata+0x16c): undefined reference to `rtl8366rb_variant'

... with the following build configuration:

CONFIG_NET_DSA_REALTEK=y
CONFIG_NET_DSA_REALTEK_SMI=y
CONFIG_NET_DSA_REALTEK_RTL8365MB=y
CONFIG_NET_DSA_REALTEK_RTL8366RB=m

The problem here is that the realtek-smi interface driver gets built-in,
while the rtl8366rb switch subdriver gets built as a module, hence the
symbol rtl8366rb_variant is not reachable when defining the OF device
table in the interface driver.

The Kconfig dependencies don't help in this scenario because they just
say that the subdriver(s) depend on at least one interface driver. In
fact, the subdrivers don't depend on the interface drivers at all, and
can even be built even in their absence. Somewhat strangely, the
interface drivers can also be built in the absence of any subdriver,
BUT, if a subdriver IS enabled, then it must be reachable according to
the linkage of the interface driver: effectively what the IS_REACHABLE()
macro achieves. If it is not reachable, the above kind of linker error
will be observed.

Rather than papering over the above build error by simply using
IS_REACHABLE(), we can do a little better and admit that it is actually
the interface drivers that have a dependency on the subdrivers. So this
patch does exactly that. Specifically, we ensure that:

1. The interface drivers' Kconfig symbols must have a value no greater
   than the value of any subdriver Kconfig symbols.

2. The subdrivers should by default enable both interface drivers, since
   most users probably want at least one of them; those interface
   drivers can be explicitly disabled however.

What this doesn't do is prevent a user from building only a subdriver,
without any interface driver. To that end, add an additional line of
help in the menu to guide users in the right direction.

Link: https://lore.kernel.org/all/202204110757.XIafvVnj-lkp@intel.com/Reported-by: kernel test robot <lkp@intel.com>
Fixes: aac94001 ("net: dsa: realtek: add new mdio interface for drivers")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kalle Valo says:

====================
wireless fixes for v5.18

First set of fixes for v5.18. Maintainers file updates, two
compilation warning fixes, one revert for ath11k and smaller fixes to
drivers and stack. All the usual stuff.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

AST2600 MAC register 0x58 is writable only when the MAC clock is
enabled.  Usually, the MAC clock is enabled by the bootloader so
register 0x58 is set normally when the bootloader is involved.  To make
ast2600 ftgmac100 work without the bootloader, postpone the register
write until the clock is ready.

Fixes: 137d23ce ("net: ftgmac100: Fix Aspeed ast2600 TX hang issue")
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 11fd667d.

dsa_slave_change_mtu() updates the MTU of the DSA master and of the
associated CPU port, but only if it detects a change to the master MTU.

The blamed commit in the Fixes: tag below addressed a regression where
dsa_slave_change_mtu() would return early and not do anything due to
ds->ops->port_change_mtu() not being implemented.

However, that commit also had the effect that the master MTU got set up
to the correct value by dsa_master_setup(), but the associated CPU port's
MTU did not get updated. This causes breakage for drivers that rely on
the ->port_change_mtu() DSA call to account for the tagging overhead on
the CPU port, and don't set up the initial MTU during the setup phase.

Things actually worked before because they were in a fragile equilibrium
where dsa_slave_change_mtu() was called before dsa_master_setup() was.
So dsa_slave_change_mtu() could actually detect a change and update the
CPU port MTU too.

Restore the code to the way things used to work by reverting the reorder
of dsa_tree_setup_master() and dsa_tree_setup_ports(). That change did
not have a concrete motivation going for it anyway, it just looked
better.

Fixes: 066dfc42 ("Revert "net: dsa: stop updating master MTU from master.c"")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MACVLAN receive handler clones skbs to all matching source MACVLAN
interfaces, before it passes the packet along to match on destination
based MACVLANs.

When using the MACVLAN nodst mode, passing the packet to destination based
MACVLANs is omitted and the handler returns with RX_HANDLER_CONSUMED.
However, the passed skb is not freed, leaking for any packet processed
with the nodst option.

Properly free the skb when consuming packets to fix that leak.

Fixes: 427f0c8c ("macvlan: Add nodst option to macvlan type source")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit ebe48d36 ("esp: Fix possible buffer overflow in ESP
transformation") tried to fix skb_page_frag_refill usage in ESP by
capping allocsize to 32k, but that doesn't completely solve the issue,
as skb_page_frag_refill may return a single page. If that happens, we
will write out of bounds, despite the check introduced in the previous
patch.

This patch forces COW in cases where we would end up calling
skb_page_frag_refill with a size larger than a page (first in
esp_output_head with tailen, then in esp_output_tail with
skb->data_len).

Fixes: cac2661c ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

In the previous fix, we increased the max buffer bytes from 1MB to 4MB
so that we can use bigger buffers for the modern HiFi devices with
higher rates, more channels and wider formats.  OTOH, extending this
has a concern that too big buffer is allowed for the lower rates, less
channels and narrower formats; when an application tries to allocate
as big buffer as possible, it'll lead to unexpectedly too huge size.

Also, we had a problem about the inconsistent max buffer and period
bytes for the implicit feedback mode when both streams have different
channels.  This was fixed by the (relatively complex) patch to reduce
the max buffer and period bytes accordingly.

This is an alternative fix for those, a patch to kill two birds with
one stone (*): instead of increasing the max buffer bytes blindly and
applying the reduction per channels, we simply use the hw constraints
for the buffer and period "time".  Meanwhile the max buffer and period
bytes are set unlimited instead.

Since the inconsistency of buffer (and period) bytes comes from the
difference of the channels in the tied streams, as long as we care
only about the buffer (and period) time, it doesn't matter; the buffer
time is same for different channels, although we still allow higher
buffer size.  Similarly, this will allow more buffer bytes for HiFi
devices while it also keeps the reasonable size for the legacy
devices, too.

As of this patch, the max period and buffer time are set to 1 and 2
seconds, which should be large enough for all possible use cases.

(*) No animals were harmed in the making of this patch.

Fixes: 98c27add ("ALSA: usb-audio: Cap upper limits of buffer/period bytes for implicit fb")
Fixes: fee2ec8c ("ALSA: usb-audio: Increase max buffer size")
Link: https://lore.kernel.org/r/20220412130740.18933-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>