- 19 Aug, 2016 1 commit
-
-
Dave Gordon authored
In the recent patch bc3d6744 drm/i915: Allow userspace to request no-error-capture upon ... the final version moved the flags and the associated #defines around so they were adjacent; unfortunately, they ended up between a comment and the thing (hw_id) to which the comment applies :( So this patch reshuffles the comment and subject back together. Also, as we're touching 'hw_id', let's change it from just 'unsigned' to a fully-specified 'unsigned int', because some code checking tools (including checkpatch) object to plain 'unsigned'. Fixes: bc3d6744 ("drm/i915: Allow userspace to request no-error-capture...") Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1471616622-6919-1-git-send-email-david.s.gordon@intel.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 18 Aug, 2016 39 commits
-
-
Chris Wilson authored
If we need to use clflush to prepare our batch for reads from memory, we can bypass the cache instead by using non-temporal copies. Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-39-chris@chris-wilson.co.uk
-
Chris Wilson authored
A significant proportion of the cmdparsing time for some batches is the cost to find the register in the mmiotable. We ensure that those tables are in ascending order such that we could do a binary search if it was ever merited. It is. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-38-chris@chris-wilson.co.uk
-
Chris Wilson authored
If the command descriptor says to skip it, ignore checking for anyother other conflict. Signed-off-by:
-
Chris Wilson authored
On the blitter (and in test code), we see long sequences of repeated commands, e.g. XY_PIXEL_BLT, XY_SCANLINE_BLT, or XY_SRC_COPY. For these, we can skip the hashtable lookup by remembering the previous command descriptor and doing a straightforward compare of the command header. The corollary is that we need to do one extra comparison before lookup up new commands. v2: Less magic mask (ok, it is still magic, but now you cannot see!) Signed-off-by:
-
Chris Wilson authored
The existing code's hashfunction is very suboptimal (most 3D commands use the same bucket degrading the hash to a long list). The code even acknowledge that the issue was known and the fix simple: /* * If we attempt to generate a perfect hash, we should be able to look at bits * 31:29 of a command from a batch buffer and use the full mask for that * client. The existing INSTR_CLIENT_MASK/SHIFT defines can be used for this. */ Signed-off-by:
-
Chris Wilson authored
For simplicity, we want to continue using a contiguous mapping of the command buffer, but we can reduce the number of vmappings we hold by switching over to a page-by-page copy from the user batch buffer to the shadow. The cost for saving one linear mapping is about 5% in trivial workloads - which is more or less the overhead in calling kmap_atomic(). Signed-off-by:
-
Chris Wilson authored
The single largest factor in the overhead of parsing the commands is the setup of the virtual mapping to provide a continuous block for the batch buffer. If we keep those vmappings around (against the better judgement of mm/vmalloc.c, which we offset by handwaving and looking suggestively at the shrinker) we can dramatically improve the performance of the parser for small batches (such as media workloads). Furthermore, we can use the prepare shmem read/write functions to determine how best we need to clflush the range (rather than every page of the object). The impact of caching both src/dst vmaps is +80% on ivb and +140% on byt for the throughput on small batches. (Caching just the dst vmap and iterating over the src, doing a page by page copy is roughly 5% slower on both platforms. That may be an acceptable trade-off to eliminate one cached vmapping, and we may be able to reduce the per-page copying overhead further.) For *this* simple test case, the cmdparser is now within a factor of 2 of ideal performance. Signed-off-by:
-
Chris Wilson authored
Since I have been using the BCS_TIMESTAMP to measure latency of execution upon the blitter ring, allow regular userspace to also read from that register. They are already allowed RCS_TIMESTAMP! Signed-off-by:
-
Chris Wilson authored
If the developer adds a register in the wrong order, we BUG during boot. That makes development and testing very difficult. Let's be a bit more friendly and disable the command parser with a big warning if the tables are invalid. Signed-off-by:
-
Chris Wilson authored
Since commit 43566ded ("drm/i915: Broaden application of set-domain(GTT)") we allowed objects to be in the GTT domain, but unbound. Therefore removing the GTT cache domain when removing the GGTT vma is no longer semantically correct. An unfortunate side-effect is we lose the wondrously named i915_gem_object_finish_gtt(), not to be confused with i915_gem_gtt_finish_object()! Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-30-chris@chris-wilson.co.uk
-
Chris Wilson authored
We track the LRU access for eviction and bump the last access for the user GGTT on set-to-gtt. When we do so we need to not only bump the primary GGTT VMA but all partials as well. Similarly we want to bump the last access tracking for when unpinning an object from the scanout so that they do not get promptly evicted and hopefully remain available for reuse on the next frame. Signed-off-by:
-
Chris Wilson authored
When using the aliasing ppgtt and pageflipping with the shrinker/eviction active, we note that we often have to rebind the backbuffer before flipping onto the scanout because it has an invalid alignment. If we store the worst-case alignment required for a VMA, we can avoid having to rebind at critical junctures. Signed-off-by:
-
Chris Wilson authored
The existing ABI says that scanouts are pinned into the mappable region so that legacy clients (e.g. old Xorg or plymouthd) can write directly into the scanout through a GTT mapping. However if the surface does not fit into the mappable region, we are better off just trying to fit it anywhere and hoping for the best. (Any userspace that is capable of using ginormous scanouts is also likely not to rely on pure GTT updates.) With the partial vma fault support, we are no longer restricted to only using scanouts that we can pin (though it is still preferred for performance reasons and for powersaving features like FBC). v2: Skip fence pinning when not mappable. v3: Add a comment to explain the possible ramifications of not being able to use fences for unmappable scanouts. v4: Rebase to skip over some local patches v5: Rebase to defer until after we have unmappable GTT fault support Signed-off-by: -
Chris Wilson authored
Often times we do not want to evict mapped objects from the GGTT as these are quite expensive to teardown and frequently reused (causing an equally, if not more so, expensive setup). In particular, when faulting in a new object we want to avoid evicting an active object, or else we may trigger a page-fault-of-doom as we ping-pong between evicting two objects. Signed-off-by:
-
Chris Wilson authored
If FBC is set on a framebuffer that is unmapped, all GTT faults will be from a partial mapping. Writes by the user through the partial VMA are then untracked by the FBC and so we must use the ORIGIN_CPU when flushing the I915_GEM_DOMAIN_GTT. v2: Keep ORIGIN_CPU for set-to-domain(.write=CPU) Signed-off-by:
-
Chris Wilson authored
If we want to create a partial vma from a chunk that is the same size as the object, create a normal ggtt vma instead. The benefit is that it will match future requests for the normal ggtt. Signed-off-by:
-
Chris Wilson authored
We want to always use the partial VMA as a fallback for a failure to bind the object into the GGTT. This extends the support partial objects in the GGTT to cover everything, not just objects too large. v2: Call the partial view, view not partial. Signed-off-by:
-
Chris Wilson authored
In order to support setting up fences for partial mappings of an object, we have to align those mappings with the fence. The minimum chunksize we choose is at least the size of a single tile row. v2: Make minimum chunk size a define for later use Signed-off-by:
-
Chris Wilson authored
In order to handle tiled partial GTT mmappings, we need to associate the fence with an individual vma. v2: A couple of silly drops replaced spotted by Joonas Signed-off-by:
-
Chris Wilson authored
Our current practice is to only name the actual list (here dev_priv->fence_list) using "list", and elements upon that list are referred to as "link". Further, the lru nature is of the list and not of the node and including in the name does not disambiguate the link from anything else. Signed-off-by:
-
Chris Wilson authored
Keep any error reported by the gup_worker until we are notified that the arena has changed (via the mmu-notifier). This has the importance of making two consecutive calls to i915_gem_object_get_pages() reporting the same error, and curtailing a loop of detecting a fault and requeueing a gup_worker. Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-19-chris@chris-wilson.co.uk
-
Chris Wilson authored
If we have stolen available, make use of it for ringbuffer allocation. Previously this was restricted to !llc platforms, as writing to stolen requires a GGTT mapping - but now that we have partial mappable support, the mappable aperture isn't quite so precious so we can use it more freely and ringbuffers are a good user for the otherwise wasted stolen. Signed-off-by:
-
Chris Wilson authored
Now that we have WC vmapping available, we can bind our rings anywhere in the GGTT and do not need to restrict them to the mappable region. Except for stolen objects, for which direct access is verbatim and we must use the mappable aperture. Signed-off-by:
-
Chris Wilson authored
By moving map-and-fenceable tracking from the object to the VMA, we gain fine-grained tracking and the ability to track individual fences on the VMA (subsequent patch). Signed-off-by:
-
Chris Wilson authored
As we cannot access the backing pages behind stolen objects, we should not attempt to do so for relocations. Signed-off-by:
-
Chris Wilson authored
If we cannot pin the entire object into the mappable region of the GTT, try to pin a single page instead. This is much more likely to succeed, and prevents us falling back to the clflush slow path. Signed-off-by:
-
Chris Wilson authored
With the introduction of the reloc page cache, we are just one step away from refactoring the relocation write functions into one. Not only does it tidy the code (slightly), but it greatly simplifies the control logic much to gcc's satisfaction. v2: Add selftests to document the relationship between the clflush flags, the KMAP bit and packing into the page-aligned pointer. Signed-off-by:
-
Chris Wilson authored
Since we know the write domain, we can drop the local variable and make the code look a tiny bit simpler. Signed-off-by:
-
Chris Wilson authored
There is an improbable, but not impossible, case that if we leave the pages unpin as we operate on the object, then somebody via the shrinker may steal the lock (which lock? right now, it is struct_mutex, THE lock) and change the cache domains after we have already inspected them. (Whilst here, avail ourselves of the opportunity to take a couple of steps to make the two functions look more similar.) Signed-off-by:
-
Chris Wilson authored
If we quickly switch from writing through the GTT to a read of the physical page directly with the CPU (e.g. performing relocations through the GTT and then running the command parser), we can observe that the writes are not visible to the CPU. It is not a coherency problem, as extensive investigations with clflush have demonstrated, but a mere timing issue - we have to wait for the GTT to complete it's write before we start our read from the CPU. The issue can be illustrated in userspace with: gtt = gem_mmap__gtt(fd, handle, 0, OBJECT_SIZE, PROT_READ | PROT_WRITE); cpu = gem_mmap__cpu(fd, handle, 0, OBJECT_SIZE, PROT_READ | PROT_WRITE); gem_set_domain(fd, handle, I915_GEM_DOMAIN_GTT, I915_GEM_DOMAIN_GTT); for (i = 0; i < OBJECT_SIZE / 64; i++) { int x = 16*i + (i%16); gtt[x] = i; clflush(&cpu[x], sizeof(cpu[x])); assert(cpu[x] == i); } Experimenting with that shows that this behaviour is indeed limited to recent Atom-class hardware. Testcase: igt/gem_exec_flush/basic-batch-default-cmd #byt Signed-off-by: -
Chris Wilson authored
If we want to read the pages directly via the CPU, we have to be sure that we have to flush the writes via the GTT (as the CPU can not see the address aliasing). Signed-off-by:
-
Chris Wilson authored
This is a companion to i915_gem_obj_prepare_shmem_read() that prepares the backing storage for direct writes. It first serialises with the GPU, pins the backing storage and then indicates what clfushes are required in order for the writes to be coherent. Whilst here, fix support for ancient CPUs without clflush for which we cannot do the GTT+clflush tricks. v2: Add i915_gem_obj_finish_shmem_access() for symmetry Signed-off-by:
-
Chris Wilson authored
When doing relocations, we have to obtain a mapping to the page containing the target address. This is either a kmap or iomap depending on GPU and its cache coherency. Neighbouring relocation entries are typically within the same page and so we can cache our kmapping between them and avoid those pesky TLB flushes. Note that there is some sleight-of-hand in how the slow relocate works as the reloc_entry_cache implies pagefaults disabled (as we are inside a kmap_atomic section). However, the slow relocate code is meant to be the fallback from the atomic fast path failing. Fortunately it works as we already have performed the copy_from_user for the relocation array (no more pagefaults there) and the kmap_atomic cache is enabled after we have waited upon an active buffer (so no more sleeping in atomic). Magic! Signed-off-by:
-
Chris Wilson authored
If we cannot release the fence (for example if someone is inexplicably trying to write into a tiled framebuffer that is currently pinned to the display! *cough* kms_frontbuffer_tracking *cough*) fallback to using the page-by-page pwrite/pread interface, rather than fail the syscall entirely. Since this is triggerable by the user (along pwrite) we have to remove the WARN_ON(fence->pin_count). Signed-off-by:
-
Chris Wilson authored
Similarly to invalidating beforehand, if the object is mmapped via I915_MMAP_WC we cannot track writes through the I915_GEM_DOMAIN_GTT. At the conclusion of the write, i915_gem_object_flush_gtt_writes() we also need to treat the origin carefully in case it may have been untracked. See also commit aeecc969 ("drm/i915: use ORIGIN_CPU for frontbuffer invalidation on WC mmaps"). Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-5-chris@chris-wilson.co.uk
-
Chris Wilson authored
As pwrite does not use the fence for its GTT access, and may even go through a secondary interface avoiding the main VMA, we cannot treat the write as automatically invalidated by the hardware and so we require ORIGIN_CPU frontbufer invalidate/flushes. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Chris Wilson authored
Since vfree() now likes to WARN when passed a non-page-aligned pointer, we need to discard the low bits to comply with it. Fixes: d31d7cb1 ("drm/i915: Support for creating write combined type vmaps") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Chris Wilson authored
After we update one PTE for a page, the caller expects to be able to immediately use that through a GGTT read/write. To comply with the callers expectations we therefore need to flush the chipset buffers before returning. Reported-by:
Matti Hämäläinen <ccr@tnsp.org> Fixes: d6473f56 ("drm/i915: Add support for mapping an object page...") Signed-off-by:
-
Chris Wilson authored
If userspace is asynchronously streaming into the batch or other execobjects, we may not flush those writes along with a change in cache domain (as there is no change). Therefore those writes may end up in internal chipset buffers and not visible to the GPU upon execution. We must issue a flush command or otherwise we encounter incoherency in the batchbuffers and the GPU executing invalid commands (i.e. hanging) quite regularly. v2: Throw a paranoid wmb() into the general flush so that we remain consistent with before. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90841 Fixes: 1816f923 ("drm/i915: Support creation of unbound wc user...") Signed-off-by:
-
