The patch:

	commit a6f76f23
	CRED: Make execve() take advantage of copy-on-write credentials

moved the place in which the 'safeness' of a SUID/SGID exec was performed to
before de_thread() was called.  This means that LSM_UNSAFE_SHARE is now
calculated incorrectly.  This flag is set if any of the usage counts for
fs_struct, files_struct and sighand_struct are greater than 1 at the time the
determination is made.  All of which are true for threads created by the
pthread library.

However, since we wish to make the security calculation before irrevocably
damaging the process so that we can return it an error code in the case where
we decide we want to reject the exec request on this basis, we have to make the
determination before calling de_thread().

So, instead, we count up the number of threads (CLONE_THREAD) that are sharing
our fs_struct (CLONE_FS), files_struct (CLONE_FILES) and sighand_structs
(CLONE_SIGHAND/CLONE_THREAD) with us.  These will be killed by de_thread() and
so can be discounted by check_unsafe_exec().

We do have to be careful because CLONE_THREAD does not imply FS or FILES.

We _assume_ that there will be no extra references to these structs held by the
threads we're going to kill.

This can be tested with the attached pair of programs.  Build the two programs
using the Makefile supplied, and run ./test1 as a non-root user.  If
successful, you should see something like:

	[dhowells@andromeda tmp]$ ./test1
	--TEST1--
	uid=4043, euid=4043 suid=4043
	exec ./test2
	--TEST2--
	uid=4043, euid=0 suid=0
	SUCCESS - Correct effective user ID

and if unsuccessful, something like:

	[dhowells@andromeda tmp]$ ./test1
	--TEST1--
	uid=4043, euid=4043 suid=4043
	exec ./test2
	--TEST2--
	uid=4043, euid=4043 suid=4043
	ERROR - Incorrect effective user ID!

The non-root user ID you see will depend on the user you run as.

[test1.c]
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <pthread.h>

static void *thread_func(void *arg)
{
	while (1) {}
}

int main(int argc, char **argv)
{
	pthread_t tid;
	uid_t uid, euid, suid;

	printf("--TEST1--\n");
	getresuid(&uid, &euid, &suid);
	printf("uid=%d, euid=%d suid=%d\n", uid, euid, suid);

	if (pthread_create(&tid, NULL, thread_func, NULL) < 0) {
		perror("pthread_create");
		exit(1);
	}

	printf("exec ./test2\n");
	execlp("./test2", "test2", NULL);
	perror("./test2");
	_exit(1);
}

[test2.c]
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

int main(int argc, char **argv)
{
	uid_t uid, euid, suid;

	getresuid(&uid, &euid, &suid);
	printf("--TEST2--\n");
	printf("uid=%d, euid=%d suid=%d\n", uid, euid, suid);

	if (euid != 0) {
		fprintf(stderr, "ERROR - Incorrect effective user ID!\n");
		exit(1);
	}
	printf("SUCCESS - Correct effective user ID\n");
	exit(0);
}

[Makefile]
CFLAGS = -D_GNU_SOURCE -Wall -Werror -Wunused
all: test1 test2

test1: test1.c
	gcc $(CFLAGS) -o test1 test1.c -lpthread

test2: test2.c
	gcc $(CFLAGS) -o test2 test2.c
	sudo chown root.root test2
	sudo chmod +s test2
Reported-by: David Smith <dsmith@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: David Smith <dsmith@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Add missing COEF initialization for ALC887
  ALSA: hda - Add missing initialization for ALC272
  sound: usb-audio: handle wMaxPacketSize for FIXED_ENDPOINT devices
  ALSA: hda - Fix misc workqueue issues
  ALSA: hda - Add quirk for FSC Amilo Xi2550

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: dv1394: move deprecation message from module init to file open
  firewire: core: Remove card from list of cards when enable fails

This fixes the shortlog attribution e.g. for 106757b3Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I created commit 7971db5a on a machine
where I forgot to set user.name and user.email before.  The default
values were not optimal.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I happened to forked lots of processes, and hit NULL pointer dereference.
It is because in copy_process() after checking max_threads, 0 is returned
but not -EAGAIN.

The bug is introduced by "CRED: Detach the credentials from task_struct"
(commit f1752eec).
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://neil.brown.name/md:
  md: Ensure an md array never has too many devices.
  md: Fix a bug in linear.c causing which_dev() to return the wrong device.
  md: Allow read error in a single drive raid1 to be passed up.

On many Linux installations, the dv1394 driver will be auto-loaded
whenever an AV/C device (e.g. camcorder or audio device) is plugged in.
An irritating message would then appear in the kernel log.

Defer this message to until a dv1394 character device file is actually
used by a program.  Also include the program name in the message and
update the message slightly.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALC272 needs EAPD for speaker outputs as well as other similar ALC
codecs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

For audio devices that do not have proper audio descriptors (e.g.,
Edirol UA-20), we use hardcoded parameters from our quirks list.
However, we must still read the maximum packet size from the standard
endpoint descriptor; otherwise, we might use packets that are too big
and therefore rejected by the USB core.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Each different metadata format supported by md supports a
different maximum number of devices.
We really should be enforcing this maximum in the kernel, but
we aren't quite doing that properly.

We currently only enforce it at the 'hot_add' point, which is an
older interface which is not used by current userspace.

We need to also enforce it at 'add_new_disk' time for active arrays
and at 'do_md_run' time when starting a new array.

So move the test from 'hot_add' into 'bind_rdev_to_array' which is
called from both 'hot_add' and 'add_new_disk, and add a new
test in 'analyse_sbs' which is called from 'do_md_run'.

This bug (or missing feature) has been around "forever" and so
the patch is suitable for any -stable that is currently maintained.

Cc: stable@kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>

ab5bd5cb introduced the following
bug in linear software raid for large arrays on 32 bit machines:

which_dev() computes the device holding a given sector by shifting
down the sector number to a 32 bit range, dividing by the array
spacing and looking up the resulting index in the hash table of
the array.

Because the computed index might be slightly too small, a loop at
the end of which_dev() increases the index until the given sector
actually falls into the range of the device associated with that index.

The changes of the above mentioned commit caused this loop to check
whether the _index_ rather than the sector number is small enough,
effectively bypassing the loop and thus possibly returning the wrong
device.

As reported by Simon Kirby, this leads to errors such as

	linear_make_request: Sector 2340486136 out of bounds on dev sdi: 156301312 sectors, offset 2109870464

Fix this bug by introducing a local variable for the index so that
the variable containing the passed sector is left unchanged.

Cc: stable@kernel.org
Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>

If a raid1 only has a single working device and gets a read error, 
we choose to simply return that error up to the filesystem (or whatever)
rather than failing the whole array.

However the codes doesn't quite do that.  We attempt a readbalance
which allocates the same drive, so we retry the read - indefinitely. 

Instead:  If read_balance in the error case chooses the same drive that just
failed, treat it as a failure and don't retry.
Signed-off-by: NeilBrown <neilb@suse.de>

Prevent kprobes from catching spurious faults which will cause infinite
recursive page-fault and memory corruption by stack overflow.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: <stable@kernel.org>		[2.6.28.x]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

... and yes, gcc is insane enough to eat that without complaint.
We probably want sparse to scream on those...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  Revert "configfs: Silence lockdep on mkdir(), rmdir() and configfs_depend_item()"

* 'sh/for-2.6.29' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix up T-bit error handling in SH-4A mutex fastpath.
  sh: Fix up spurious syscall restarting.
  sh: fcnvds fix with denormalized numbers on SH-4 FPU.
  sh: Only reserve memory under CONFIG_ZERO_PAGE_OFFSET when it != 0.
  sh: Handle calling csum_partial with misaligned data
  sh: ap325rxa: Enable ov772x in defconfig.
  sh: ap325rxa: Add ov772x support.
  sh: ap325rxa: control camera power toggling.
  sh: mach-migor: Enable ov772x and tw9910 in defconfig.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  Revert "tcp: Always set urgent pointer if it's beyond snd_nxt"
  ipv6: Copy cork options in ip6_append_data
  udp: Fix UDP short packet false positive
  gianfar: Fix potential soft reset race
  gianfar: Fix BD_LENGTH_MASK definition
  cxgb3: Fix lro switch
  iwlwifi: save PCI state before suspend, restore after resume
  iwlwifi: clean key table in iwl_clear_stations_table

This reverts commit 64ff3b93.

Jeff Chua reports that it breaks rlogin for him.
Signed-off-by: David S. Miller <davem@davemloft.net>

As the options passed to ip6_append_data may be ephemeral, we need
to duplicate it for corking.  This patch applies the simplest fix
which is to memdup all the relevant bits.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The UDP header pointer assignment must happen after calling
pskb_may_pull().  As pskb_may_pull() can potentially alter the SKB
buffer.

This was exposted by running multicast traffic through the NIU driver,
as it won't prepull the protocol headers into the linear area on
receive.
Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

lseek() further than length of the file will leave stale ->index
(second-to-last during iteration). Next seq_read() will not notice
that ->f_pos is big enough to return 0, but will print last item
as if ->f_pos is pointing to it.

Introduced in commit cb510b81
aka "seq_file: more atomicity in traverse()".
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In 2.6.25 some /proc files were converted to use the seq_file
infrastructure.  But seq_files do not correctly support pread(), which
broke some usersapce applications.

To handle pread correctly we can't assume that f_pos is where we left it
in seq_read.  So move traverse() so that we can eventually use it in
seq_read and do thus some day support pread().
Signed-off-by: Eric Biederman <ebiederm@xmission.com>
Cc: Paul Turner <pjt@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

A missing type cast results in writing way beyond the end of a kzalloc()'d
memory segment resulting in slab corruption. But it seems like the better
solution is to define ->recv_msg_slots as a 'void *' rather than a
'struct xpc_notify_mq_msg_uv *' and add the type cast.
Signed-off-by: Dean Nelson <dcn@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Do usual do {} while (0) dance, otherwise

fs/gfs2/util.c:99: error: expected expression before 'else'
drivers/scsi/lpfc/lpfc_sli.c:363: error: expected expression before 'else'
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If we return directly with -EPERM then lock_kernel() is still held.

This was found with a code checker (http://repo.or.cz/w/smatch.git/).

[akpm@linux-foundation.org: fix another such path - missed func_exit()]
Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: <R.E.Wolff@BitWizard.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix namespace violations by changing non-kconfig CONFIG_ names to CNFG_*.

Fixes breakage in staging/, which adds a real CONFIG_PANEL.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rtc/rtc-ds1390.c:125: warning: unused variable 'rtc'
Signed-off-by: Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently both da903x backlight and voltage reulator drivers have the
same name. Rename the backlight driver to allow use of both drivers as
modules.
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The ssc pointer is not valid when the id is not found in the list.
Convert the message from a debug one into an error message and avoid
dereferencing the bad pointer.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Huang Weiyi <weiyi.huang@gmail.com>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix do_wp_page for VM_MIXEDMAP mappings.

In the case where pfn_valid returns 0 for a pfn at the beginning of
do_wp_page and the mapping is not shared writable, the code branches to
label `gotten:' with old_page == NULL.

In case the vma is locked (vma->vm_flags & VM_LOCKED), lock_page,
clear_page_mlock, and unlock_page try to access the old_page.

This patch checks whether old_page is valid before it is dereferenced.

The regression was introduced by "mlock: mlocked pages are unevictable"
(commit b291f000).
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@kernel.org>		[2.6.28.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With exclusive waiters, every process woken up through the wait queue must
ensure that the next waiter down the line is woken when it has finished.

Interruptible waiters don't do that when aborting due to a signal.  And if
an aborting waiter is concurrently woken up through the waitqueue, noone
will ever wake up the next waiter.

This has been observed with __wait_on_bit_lock() used by
lock_page_killable(): the first contender on the queue was aborting when
the actual lock holder woke it up concurrently.  The aborted contender
didn't acquire the lock and therefor never did an unlock followed by
waking up the next waiter.

Add abort_exclusive_wait() which removes the process' wait descriptor from
the waitqueue, iff still queued, or wakes up the next waiter otherwise.
It does so under the waitqueue lock.  Racing with a wake up means the
aborting process is either already woken (removed from the queue) and will
wake up the next waiter, or it will remove itself from the queue and the
concurrent wake up will apply to the next waiter after it.

Use abort_exclusive_wait() in __wait_event_interruptible_exclusive() and
__wait_on_bit_lock() when they were interrupted by other means than a wake
up through the queue.

[akpm@linux-foundation.org: coding-style fixes]
Reported-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Mentored-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Chuck Lever <cel@citi.umich.edu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>		["after some testing"]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I got the "list is moderated message," so add it here.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add support for the HP laptops of model 6710x for having correctly setup
axes.
Signed-off-by: Martin Kebert <gkmarty@gmail.com>
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add support for the HP laptops of model 6730x for having correctly setup
axes.
Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add support for the HP laptops of model 6530x for having correctly setup
axes.
Reported-by: Jerome Poulin <jeromepoulin@gmail.com>
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>