- 19 Jul, 2014 2 commits
-
-
Eric Sandeen authored
commit 99994cde btrfs: dev delete should remove sysfs entry added a btrfs_kobj_rm_device, which dereferences device->bdev... right after we check whether device->bdev might be NULL. I don't honestly know if it's possible to have a NULL device->bdev here, but assuming that it is (given the test), we need to move the kobject removal to be under that test. (Coverity spotted this) Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
Liu Bo authored
xfstests generic/127 detected this problem. With commit 7fc34a62, now fsync will only flush data within the passed range. This is the cause of the above problem, -- btrfs's fsync has a stage called 'sync log' which will wait for all the ordered extents it've recorded to finish. In xfstests/generic/127, with mixed operations such as truncate, fallocate, punch hole, and mapwrite, we get some pre-allocated extents, and mapwrite will mmap, and then msync. And I find that msync will wait for quite a long time (about 20s in my case), thanks to ftrace, it turns out that the previous fallocate calls 'btrfs_wait_ordered_range()' to flush dirty pages, but as the range of dirty pages may be larger than 'btrfs_wait_ordered_range()' wants, there can be some ordered extents created but not getting corresponding pages flushed, then they're left in memory until we fsync which runs into the stage 'sync log', and fsync will just wait for the system writeback thread to flush those pages and get ordered extents finished, so the latency is inevitable. This adds a flush similar to btrfs_start_ordered_extent() in btrfs_wait_logged_extents() to fix that. Reviewed-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
- 03 Jul, 2014 11 commits
-
-
Filipe Manana authored
Often when starting a transaction we commit the currently running transaction, which can end up writing block group caches when the current process has its journal_info set to NULL (and not to a transaction). This makes our assertion at btrfs_check_data_free_space() (current_journal != NULL) fail, resulting in a crash/hang. Therefore fix it by setting journal_info. Two different traces of this issue follow below. 1) [51502.241936] BTRFS: assertion failed: current->journal_info, file: fs/btrfs/extent-tree.c, line: 3670 [51502.242213] ------------[ cut here ]------------ [51502.242493] kernel BUG at fs/btrfs/ctree.h:3964! [51502.242669] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC (...) [51502.244010] Call Trace: [51502.244010] [<ffffffffa02bc025>] btrfs_check_data_free_space+0x395/0x3a0 [btrfs] [51502.244010] [<ffffffffa02c3bdc>] btrfs_write_dirty_block_groups+0x4ac/0x640 [btrfs] [51502.244010] [<ffffffffa0357a6a>] commit_cowonly_roots+0x164/0x226 [btrfs] [51502.244010] [<ffffffffa02d53cd>] btrfs_commit_transaction+0x4ed/0xab0 [btrfs] [51502.244010] [<ffffffff8168ec7b>] ? _raw_spin_unlock+0x2b/0x40 [51502.244010] [<ffffffffa02d6259>] start_transaction+0x459/0x620 [btrfs] [51502.244010] [<ffffffffa02d67ab>] btrfs_start_transaction+0x1b/0x20 [btrfs] [51502.244010] [<ffffffffa02d73e1>] __unlink_start_trans+0x31/0xe0 [btrfs] [51502.244010] [<ffffffffa02dea67>] btrfs_unlink+0x37/0xc0 [btrfs] [51502.244010] [<ffffffff811bb054>] ? do_unlinkat+0x114/0x2a0 [51502.244010] [<ffffffff811baebc>] vfs_unlink+0xcc/0x150 [51502.244010] [<ffffffff811bb1a0>] do_unlinkat+0x260/0x2a0 [51502.244010] [<ffffffff811a9ef4>] ? filp_close+0x64/0x90 [51502.244010] [<ffffffff810aaea6>] ? trace_hardirqs_on_caller+0x16/0x1e0 [51502.244010] [<ffffffff81349cab>] ? trace_hardirqs_on_thunk+0x3a/0x3f [51502.244010] [<ffffffff811be9eb>] SyS_unlinkat+0x1b/0x40 [51502.244010] [<ffffffff81698452>] system_call_fastpath+0x16/0x1b [51502.244010] Code: 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 89 f1 48 c7 c2 71 13 36 a0 48 89 fe 31 c0 48 c7 c7 b8 43 36 a0 48 89 e5 e8 5d b0 32 e1 <0f> 0b 0f 1f 44 00 00 55 b9 11 00 00 00 48 89 e5 41 55 49 89 f5 [51502.244010] RIP [<ffffffffa03575da>] assfail.constprop.88+0x1e/0x20 [btrfs] 2) [25405.097230] BTRFS: assertion failed: current->journal_info, file: fs/btrfs/extent-tree.c, line: 3670 [25405.097488] ------------[ cut here ]------------ [25405.097767] kernel BUG at fs/btrfs/ctree.h:3964! [25405.097940] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC (...) [25405.100008] Call Trace: [25405.100008] [<ffffffffa02bc025>] btrfs_check_data_free_space+0x395/0x3a0 [btrfs] [25405.100008] [<ffffffffa02c3bdc>] btrfs_write_dirty_block_groups+0x4ac/0x640 [btrfs] [25405.100008] [<ffffffffa035755a>] commit_cowonly_roots+0x164/0x226 [btrfs] [25405.100008] [<ffffffffa02d53cd>] btrfs_commit_transaction+0x4ed/0xab0 [btrfs] [25405.100008] [<ffffffff8109c170>] ? bit_waitqueue+0xc0/0xc0 [25405.100008] [<ffffffffa02d6259>] start_transaction+0x459/0x620 [btrfs] [25405.100008] [<ffffffffa02d67ab>] btrfs_start_transaction+0x1b/0x20 [btrfs] [25405.100008] [<ffffffffa02e3407>] btrfs_create+0x47/0x210 [btrfs] [25405.100008] [<ffffffffa02d74cc>] ? btrfs_permission+0x3c/0x80 [btrfs] [25405.100008] [<ffffffff811bc63b>] vfs_create+0x9b/0x130 [25405.100008] [<ffffffff811bcf19>] do_last+0x849/0xe20 [25405.100008] [<ffffffff811b9409>] ? link_path_walk+0x79/0x820 [25405.100008] [<ffffffff811bd5b5>] path_openat+0xc5/0x690 [25405.100008] [<ffffffff810ab07d>] ? trace_hardirqs_on+0xd/0x10 [25405.100008] [<ffffffff811cdcd2>] ? __alloc_fd+0x32/0x1d0 [25405.100008] [<ffffffff811be2a3>] do_filp_open+0x43/0xa0 [25405.100008] [<ffffffff811cddf1>] ? __alloc_fd+0x151/0x1d0 [25405.100008] [<ffffffff811abcfc>] do_sys_open+0x13c/0x230 [25405.100008] [<ffffffff810aaea6>] ? trace_hardirqs_on_caller+0x16/0x1e0 [25405.100008] [<ffffffff811abe12>] SyS_open+0x22/0x30 [25405.100008] [<ffffffff81698452>] system_call_fastpath+0x16/0x1b [25405.100008] Code: 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 89 f1 48 c7 c2 51 13 36 a0 48 89 fe 31 c0 48 c7 c7 d0 43 36 a0 48 89 e5 e8 6d b5 32 e1 <0f> 0b 0f 1f 44 00 00 55 b9 11 00 00 00 48 89 e5 41 55 49 89 f5 [25405.100008] RIP [<ffffffffa03570ca>] assfail.constprop.88+0x1e/0x20 [btrfs] Signed-off-by:Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by:
-
Josef Bacik authored
We wouldn't actuall print the extent information if we had a skinny metadata item, this fixes that. Thanks, Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Liu Bo authored
This percpu counter @total_bytes_pinned is introduced to skip unnecessary operations of 'commit transaction', it accounts for those space we may free but are stuck in delayed refs. And we zero out @space_info->total_bytes_pinned every transaction period so we have a better idea of how much space we'll actually free up by committing this transaction. However, we do the 'zero out' part a little earlier, before we actually unpin space, so we end up returning ENOSPC when we actually have free space that's just unpinned from committing transaction. xfstests/generic/074 complained then. This fixes it by actually accounting the percpu pinned number when 'unpin', and since it's protected by space_info->lock, the race is gone now. Signed-off-by:
-
David Sterba authored
Return codes got updated in 60e1975a (btrfs: return errno instead of -1 from compression) lzo wrapper returns E2BIG in this case, do the same for zlib. Signed-off-by:
David Sterba <dsterba@suse.cz>
-
David Sterba authored
Commit fcebe456 (Btrfs: rework qgroup accounting) removed the qgroup accounting after delayed refs. Signed-off-by:
-
Filipe Manana authored
The transaction handle was being used after being freed. Cc: Chris Mason <clm@fb.com> Signed-off-by:
-
Anand Jain authored
dev->name is null but missing flag is not set. Strictly speaking the missing flag should have been set, but there are more places where code just checks if name is null. For now this patch does the same. stack: BUG: unable to handle kernel NULL pointer dereference at 0000000000000064 IP: [<ffffffffa0228908>] btrfs_show_devname+0x58/0xf0 [btrfs] [<ffffffff81198879>] show_vfsmnt+0x39/0x130 [<ffffffff81178056>] m_show+0x16/0x20 [<ffffffff8117d706>] seq_read+0x296/0x390 [<ffffffff8115aa7d>] vfs_read+0x9d/0x160 [<ffffffff8115b549>] SyS_read+0x49/0x90 [<ffffffff817abe52>] system_call_fastpath+0x16/0x1b reproducer: mkfs.btrfs -draid1 -mraid1 /dev/sdg1 /dev/sdg2 btrfstune -S 1 /dev/sdg1 modprobe -r btrfs && modprobe btrfs mount -o degraded /dev/sdg1 /btrfs btrfs dev add /dev/sdg3 /btrfs Signed-off-by:
Anand Jain <Anand.Jain@oracle.com> Signed-off-by:
-
Anand Jain authored
when one of the device path is missing btrfs_device name is null. So this patch will check for that. stack: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff812e18c0>] strlen+0x0/0x30 [<ffffffffa01cd92a>] ? clone_fs_devices+0xaa/0x160 [btrfs] [<ffffffffa01cdcf7>] btrfs_init_new_device+0x317/0xca0 [btrfs] [<ffffffff81155bca>] ? __kmalloc_track_caller+0x15a/0x1a0 [<ffffffffa01d6473>] btrfs_ioctl+0xaa3/0x2860 [btrfs] [<ffffffff81132a6c>] ? handle_mm_fault+0x48c/0x9c0 [<ffffffff81192a61>] ? __blkdev_put+0x171/0x180 [<ffffffff817a784c>] ? __do_page_fault+0x4ac/0x590 [<ffffffff81193426>] ? blkdev_put+0x106/0x110 [<ffffffff81179175>] ? mntput+0x35/0x40 [<ffffffff8116d4b0>] do_vfs_ioctl+0x460/0x4a0 [<ffffffff8115c72e>] ? ____fput+0xe/0x10 [<ffffffff81068033>] ? task_work_run+0xb3/0xd0 [<ffffffff8116d547>] SyS_ioctl+0x57/0x90 [<ffffffff817a793e>] ? do_page_fault+0xe/0x10 [<ffffffff817abe52>] system_call_fastpath+0x16/0x1b reproducer: mkfs.btrfs -draid1 -mraid1 /dev/sdg1 /dev/sdg2 btrfstune -S 1 /dev/sdg1 modprobe -r btrfs && modprobe btrfs mount -o degraded /dev/sdg1 /btrfs btrfs dev add /dev/sdg3 /btrfs Signed-off-by:
-
Eric Sandeen authored
The commit 07802534 btrfs: Cleanup the btrfs_parse_options for remount. broke ssd options quite badly; it stopped making ssd_spread imply ssd, and it made "nossd" unsettable. Put things back at least as well as they were before (though ssd mount option handling is still pretty odd: # mount -o "nossd,ssd_spread" works?) Reported-by:
Roman Mamedov <rm@romanrm.net> Signed-off-by:
-
Wang Shilong authored
Balance recovery is called when RW mounting or remounting from RO to RW, it is called to finish roots merging. When doing balance recovery, relocation root's corresponding fs root(whose root refs is 0) might be destroyed by cleaner thread, this will make btrfs fail to mount. Fix this problem by holding @cleaner_mutex when doing balance recovery. Signed-off-by:
Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by:
-
Filipe Manana authored
This change is based on the corresponding recent change for ext4: ext4: atomically set inode->i_flags in ext4_set_inode_flags() That has the following commit message that applies to btrfs as well: "Use cmpxchg() to atomically set i_flags instead of clearing out the S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the EXT4_IMMUTABLE_FL, EXT4_APPEND_FL flags, since this opens up a race where an immutable file has the immutable flag cleared for a brief window of time." Replacing EXT4_IMMUTABLE_FL and EXT4_APPEND_FL with BTRFS_INODE_IMMUTABLE and BTRFS_INODE_APPEND, respectively. Reviewed-by:
Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Signed-off-by:
-
- 28 Jun, 2014 9 commits
-
-
Josef Bacik authored
This is a regression from my patch a26e8c9f, we need to only unlock the block if we were the one who locked it. Otherwise this will trip BUG_ON()'s in locking.c Thanks, cc: stable@vger.kernel.org Signed-off-by:
-
Filipe Manana authored
When starting a transaction just assert that current->journal_info doesn't contain a send transaction stub, since send isn't supposed to start transactions and when it finishes (either successfully or not) it's supposed to set current->journal_info to NULL. This is motivated by the change titled: Btrfs: fix crash when starting transaction Signed-off-by: -
Sergey Senozhatsky authored
Add compression `workspace' in free_workspace() to `idle_workspace' list head, instead of tail. So we have better chances to reuse most recently used `workspace'. Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by:
-
Liu Bo authored
The reproducer is $ mkfs.btrfs D1 D2 D3 -mraid5 $ mkfs.ext4 D2 && mkfs.ext4 D3 $ mount D1 /btrfs -odegraded ------------------- [ 87.672992] ------------[ cut here ]------------ [ 87.673845] kernel BUG at fs/btrfs/raid56.c:1828! ... [ 87.673845] RIP: 0010:[<ffffffff813efc7e>] [<ffffffff813efc7e>] __raid_recover_end_io+0x4ae/0x4d0 ... [ 87.673845] Call Trace: [ 87.673845] [<ffffffff8116bbc6>] ? mempool_free+0x36/0xa0 [ 87.673845] [<ffffffff813f0255>] raid_recover_end_io+0x75/0xa0 [ 87.673845] [<ffffffff81447c5b>] bio_endio+0x5b/0xa0 [ 87.673845] [<ffffffff81447cb2>] bio_endio_nodec+0x12/0x20 [ 87.673845] [<ffffffff81374621>] end_workqueue_fn+0x41/0x50 [ 87.673845] [<ffffffff813ad2aa>] normal_work_helper+0xca/0x2c0 [ 87.673845] [<ffffffff8108ba2b>] process_one_work+0x1eb/0x530 [ 87.673845] [<ffffffff8108b9c9>] ? process_one_work+0x189/0x530 [ 87.673845] [<ffffffff8108c15b>] worker_thread+0x11b/0x4f0 [ 87.673845] [<ffffffff8108c040>] ? rescuer_thread+0x290/0x290 [ 87.673845] [<ffffffff810939c4>] kthread+0xe4/0x100 [ 87.673845] [<ffffffff810938e0>] ? kthread_create_on_node+0x220/0x220 [ 87.673845] [<ffffffff817e7c7c>] ret_from_fork+0x7c/0xb0 [ 87.673845] [<ffffffff810938e0>] ? kthread_create_on_node+0x220/0x220 ------------------- It's because that we miscalculate @rbio->bbio->error so that it doesn't reach maximum of tolerable errors while it should have. Signed-off-by:
-
Anand Jain authored
Creating sprout will change the fsid of the mounted root. do the same on the sysfs as well. reproducer: mount /dev/sdb /btrfs (seed disk) btrfs dev add /dev/sdc /btrfs mount -o rw,remount /btrfs btrfs dev del /dev/sdb /btrfs mount /dev/sdb /btrfs Error: kobject_add_internal failed for fe350492-dc28-4051-a601-e017b17e6145 with -EEXIST, don't try to register things with the same name in the same directory. Signed-off-by:
-
Anand Jain authored
when we replace the device its corresponding sysfs entry has to be replaced as well Signed-off-by:
-
Anand Jain authored
we would need the device links to be created, when device is added. Signed-off-by:
-
Anand Jain authored
when we delete the device from the mounted btrfs, we would need its corresponding sysfs enty to be removed as well. Signed-off-by:
-
Anand Jain authored
Signed-off-by:
-
- 19 Jun, 2014 9 commits
-
-
Miao Xie authored
The original bio might be submitted, so we shoud increase bi_remaining to account for it when we deal with the error that the device is missing or is not writeable, or we would skip the endio handle. Signed-off-by:
-
Miao Xie authored
The deadlock happened when we mount degraded filesystem, the reproduced steps are following: # mkfs.btrfs -f -m raid1 -d raid1 <dev0> <dev1> # echo 1 > /sys/block/`basename <dev0>`/device/delete # mount -o degraded <dev1> <mnt> The reason was that the counter -- bi_remaining was wrong. If the missing or unwriteable device was the last device in the mapping array, we would not submit the original bio, so we shouldn't increase bi_remaining of it in btrfs_end_bio(), or we would skip the final endio handle. Fix this problem by adding a flag into btrfs bio structure. If we submit the original bio, we will set the flag, and we increase bi_remaining counter, or we don't. Though there is another way to fix it -- decrease bi_remaining counter of the original bio when we make sure the original bio is not submitted, this method need add more check and is easy to make mistake. Signed-off-by:
-
Miao Xie authored
Signed-off-by:
-
Wang Shilong authored
While running balance, scrub, fsstress concurrently we hit the following kernel crash: [56561.448845] BTRFS info (device sde): relocating block group 11005853696 flags 132 [56561.524077] BUG: unable to handle kernel NULL pointer dereference at 0000000000000078 [56561.524237] IP: [<ffffffffa038956d>] scrub_chunk.isra.12+0xdd/0x130 [btrfs] [56561.524297] PGD 9be28067 PUD 7f3dd067 PMD 0 [56561.524325] Oops: 0000 [#1] SMP [....] [56561.527237] Call Trace: [56561.527309] [<ffffffffa038980e>] scrub_enumerate_chunks+0x24e/0x490 [btrfs] [56561.527392] [<ffffffff810abe00>] ? abort_exclusive_wait+0x50/0xb0 [56561.527476] [<ffffffffa038add4>] btrfs_scrub_dev+0x1a4/0x530 [btrfs] [56561.527561] [<ffffffffa0368107>] btrfs_ioctl+0x13f7/0x2a90 [btrfs] [56561.527639] [<ffffffff811c82f0>] do_vfs_ioctl+0x2e0/0x4c0 [56561.527712] [<ffffffff8109c384>] ? vtime_account_user+0x54/0x60 [56561.527788] [<ffffffff810f768c>] ? __audit_syscall_entry+0x9c/0xf0 [56561.527870] [<ffffffff811c8551>] SyS_ioctl+0x81/0xa0 [56561.527941] [<ffffffff815707f7>] tracesys+0xdd/0xe2 [...] [56561.528304] RIP [<ffffffffa038956d>] scrub_chunk.isra.12+0xdd/0x130 [btrfs] [56561.528395] RSP <ffff88004c0f5be8> [56561.528454] CR2: 0000000000000078 This is because in btrfs_relocate_chunk(), we will free @bdev directly while scrub may still hold extent mapping, and may access freed memory. Fix this problem by wrapping freeing @bdev work into free_extent_map() which is based on reference count. Reported-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by:
-
Qu Wenruo authored
When run scrub with balance, sometimes -ENOENT will be returned, since in scrub_enumerate_chunks() will search dev_extent in *COMMIT_ROOT*, but btrfs_lookup_block_group() will search block group in *MEMORY*, so if a chunk is removed but not committed, -ENOENT will be returned. However, there is no need to stop scrubbing since other chunks may be scrubbed without problem. So this patch changes the behavior to skip removed chunks and continue to scrub the rest. Signed-off-by:
-
Miao Xie authored
When we mounted the filesystem after the crash, we got the following message: BTRFS error (device xxx): block group xxxx has wrong amount of free space BTRFS error (device xxx): failed to load free space cache for block group xxx It is because we didn't update the metadata of the allocated space (in extent tree) until the file data was written into the disk. During this time, there was no information about the allocated spaces in either the extent tree nor the free space cache. when we wrote out the free space cache at this time (commit transaction), those spaces were lost. In fact, only the free space that is used to store the file data had this problem, the others didn't because the metadata of them is updated in the same transaction context. There are many methods which can fix the above problem - track the allocated space, and write it out when we write out the free space cache - account the size of the allocated space that is used to store the file data, if the size is not zero, don't write out the free space cache. The first one is complex and may make the performance drop down. This patch chose the second method, we use a per-block-group variant to account the size of that allocated space. Besides that, we also introduce a per-block-group read-write semaphore to avoid the race between the allocation and the free space cache write out. Signed-off-by:
-
Miao Xie authored
This patch makes the free space cache write out functions more readable, and beisdes that, it also reduces the stack space that the function -- __btrfs_write_out_cache uses from 194bytes to 144bytes. Signed-off-by:
-
Filipe Manana authored
The lock_wq wait queue is not used anywhere, therefore just remove it. On a x86_64 system, this reduced sizeof(struct extent_buffer) from 320 bytes down to 296 bytes, which means a 4Kb page can now be used for 13 extent buffers instead of 12. Signed-off-by:
-
Chris Mason authored
The Btrfs tree trylock function is poorly named. It always takes the spinlock and backs off if the blocking lock is held. This can lead to surprising lockups because people expect it to really be a trylock. This commit makes it a pure trylock, both for the spinlock and the blocking lock. It also reworks the nested lock handling slightly to avoid taking the read lock while a spinning write lock might be held. Signed-off-by:
-
- 13 Jun, 2014 9 commits
-
-
Eric Sandeen authored
fcebe456 cut and pasted some code to a later point in create_pending_snapshot(), but didn't switch to the appropriate error handling for this stage of the function. Signed-off-by:
-
Eric Sandeen authored
If this condition in end_extent_writepage() is false: if (tree->ops && tree->ops->writepage_end_io_hook) we will then test an uninitialized "ret" at: ret = ret < 0 ? ret : -EIO; The test for ret is for the case where ->writepage_end_io_hook failed, and we'd choose that ret as the error; but if there is no ->writepage_end_io_hook, nothing sets ret. Initializing ret to 0 should be sufficient; if writepage_end_io_hook wasn't set, (!uptodate) means non-zero err was passed in, so we choose -EIO in that case. Signed-of-by:
-
Eric Sandeen authored
If tmp = ulist_alloc(GFP_NOFS) fails, we return without freeing the previously allocated qgroups = ulist_alloc(GFP_NOFS) and cause a memory leak. Signed-off-by:
-
Filipe Manana authored
Often when running the qgroups sanity test, a crash or a hang happened. This is because the extent buffer the test uses for the root node doesn't have an header level explicitly set, making it have a random level value. This is a problem when it's not zero for the btrfs_search_slot() calls the test ends up doing, resulting in crashes or hangs such as the following: [ 6454.127192] Btrfs loaded, debug=on, assert=on, integrity-checker=on (...) [ 6454.127760] BTRFS: selftest: Running qgroup tests [ 6454.127964] BTRFS: selftest: Running test_test_no_shared_qgroup [ 6454.127966] BTRFS: selftest: Qgroup basic add [ 6480.152005] BUG: soft lockup - CPU#0 stuck for 23s! [modprobe:5383] [ 6480.152005] Modules linked in: btrfs(+) xor raid6_pq binfmt_misc nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc i2c_piix4 i2c_core pcspkr evbug psmouse serio_raw e1000 [last unloaded: btrfs] [ 6480.152005] irq event stamp: 188448 [ 6480.152005] hardirqs last enabled at (188447): [<ffffffff8168ef5c>] restore_args+0x0/0x30 [ 6480.152005] hardirqs last disabled at (188448): [<ffffffff81698e6a>] apic_timer_interrupt+0x6a/0x80 [ 6480.152005] softirqs last enabled at (188446): [<ffffffff810516cf>] __do_softirq+0x1cf/0x450 [ 6480.152005] softirqs last disabled at (188441): [<ffffffff81051c25>] irq_exit+0xb5/0xc0 [ 6480.152005] CPU: 0 PID: 5383 Comm: modprobe Not tainted 3.15.0-rc8-fdm-btrfs-next-33+ #4 [ 6480.152005] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 6480.152005] task: ffff8802146125a0 ti: ffff8800d0d00000 task.ti: ffff8800d0d00000 [ 6480.152005] RIP: 0010:[<ffffffff81349a63>] [<ffffffff81349a63>] __write_lock_failed+0x13/0x20 [ 6480.152005] RSP: 0018:ffff8800d0d038e8 EFLAGS: 00000287 [ 6480.152005] RAX: 0000000000000000 RBX: ffffffff8168ef5c RCX: 000005deb8525852 [ 6480.152005] RDX: 0000000000000000 RSI: 0000000000001d45 RDI: ffff8802105000b8 [ 6480.152005] RBP: ffff8800d0d038e8 R08: fffffe12710f63db R09: ffffffffa03196fb [ 6480.152005] R10: ffff8802146125a0 R11: ffff880214612e28 R12: ffff8800d0d03858 [ 6480.152005] R13: 0000000000000000 R14: ffff8800d0d00000 R15: ffff8802146125a0 [ 6480.152005] FS: 00007f14ff804700(0000) GS:ffff880215e00000(0000) knlGS:0000000000000000 [ 6480.152005] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 6480.152005] CR2: 00007fff4df0dac8 CR3: 00000000d1796000 CR4: 00000000000006f0 [ 6480.152005] Stack: [ 6480.152005] ffff8800d0d03908 ffffffff810ae967 0000000000000001 ffff8802105000b8 [ 6480.152005] ffff8800d0d03938 ffffffff8168e57e ffffffffa0319c16 0000000000000007 [ 6480.152005] ffff880210500000 ffff880210500100 ffff8800d0d039b8 ffffffffa0319c16 [ 6480.152005] Call Trace: [ 6480.152005] [<ffffffff810ae967>] do_raw_write_lock+0x47/0xa0 [ 6480.152005] [<ffffffff8168e57e>] _raw_write_lock+0x5e/0x80 [ 6480.152005] [<ffffffffa0319c16>] ? btrfs_tree_lock+0x116/0x270 [btrfs] [ 6480.152005] [<ffffffffa0319c16>] btrfs_tree_lock+0x116/0x270 [btrfs] [ 6480.152005] [<ffffffffa02b2acb>] btrfs_lock_root_node+0x3b/0x50 [btrfs] [ 6480.152005] [<ffffffffa02b81a6>] btrfs_search_slot+0x916/0xa20 [btrfs] [ 6480.152005] [<ffffffff811a727f>] ? create_object+0x23f/0x300 [ 6480.152005] [<ffffffffa02b9958>] btrfs_insert_empty_items+0x78/0xd0 [btrfs] [ 6480.152005] [<ffffffffa036041a>] insert_normal_tree_ref.constprop.4+0xa2/0x19a [btrfs] [ 6480.152005] [<ffffffffa03605c3>] test_no_shared_qgroup+0xb1/0x1ca [btrfs] [ 6480.152005] [<ffffffff8108cad6>] ? local_clock+0x16/0x30 [ 6480.152005] [<ffffffffa035ef8e>] btrfs_test_qgroups+0x1ae/0x1d7 [btrfs] [ 6480.152005] [<ffffffffa03a69d2>] ? ftrace_define_fields_btrfs_space_reservation+0xfd/0xfd [btrfs] [ 6480.152005] [<ffffffffa03a6a86>] init_btrfs_fs+0xb4/0x153 [btrfs] [ 6480.152005] [<ffffffff81000352>] do_one_initcall+0x102/0x150 [ 6480.152005] [<ffffffff8103d223>] ? set_memory_nx+0x43/0x50 [ 6480.152005] [<ffffffff81682668>] ? set_section_ro_nx+0x6d/0x74 [ 6480.152005] [<ffffffff810d91cc>] load_module+0x1cdc/0x2630 (...) Therefore initialize the extent buffer as an empty leaf (level 0). Issue easy to reproduce when btrfs is built as a module via: $ for ((i = 1; i <= 1000000; i++)); do rmmod btrfs; modprobe btrfs; done Signed-off-by: -
Sasha Levin authored
Mark the dereference as protected by lock. Not doing so triggers an RCU warning since the radix tree assumed that RCU is in use. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Wang Shilong authored
Steps to reproduce: # mkfs.btrfs -f /dev/sd[b-f] -m raid5 -d raid5 # mkfs.ext4 /dev/sdc --->corrupt one of btrfs device # mount /dev/sdb /mnt -o degraded # btrfs scrub start -BRd /mnt This is because readahead would skip missing device, this is not true for RAID5/6, because REQ_GET_READ_MIRRORS return 1 for RAID5/6 block mapping. If expected data locates in missing device, readahead thread would not call __readahead_hook() which makes event @rc->elems=0 wait forever. Fix this problem by checking return value of btrfs_map_block(),we can only skip missing device safely if there are several mirrors. Signed-off-by:
-
Gerhard Heift authored
This new ioctl call allows the user to supply a buffer of varying size in which a tree search can store its results. This is much more flexible if you want to receive items which are larger than the current fixed buffer of 3992 bytes or if you want to fetch more items at once. Items larger than this buffer are for example some of the type EXTENT_CSUM. Signed-off-by:
Gerhard Heift <Gerhard@Heift.Name> Signed-off-by:
-
Gerhard Heift authored
By copying each found item seperatly to userspace, we do not need extra buffer in the kernel. Signed-off-by:
-
Gerhard Heift authored
This new function reads the content of an extent directly to user memory. Signed-off-by:
-
