- 21 Dec, 2022 6 commits
-
-
Changbin Du authored
perf tools: Add .DELETE_ON_ERROR special Makefile target to clean up partially updated files on error. As kbuild, this adds .DELETE_ON_ERROR special target to clean up partially updated files on error. A known issue is the empty vmlinux.h generted by bpftool if it failed to dump btf info. Reviewed-by:
Leo Yan <leo.yan@linaro.org> Signed-off-by:
Changbin Du <changbin.du@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20221217225151.90387-1-changbin.du@gmail.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
Add more tests for the new filters. $ sudo perf test contention -v 87: kernel lock contention analysis test : --- start --- test child forked, pid 412379 Testing perf lock record and perf lock contention Testing perf lock contention --use-bpf Testing perf lock record and perf lock contention at the same time Testing perf lock contention --threads Testing perf lock contention --lock-addr Testing perf lock contention --type-filter Testing perf lock contention --lock-filter test child finished with 0 ---- end ---- kernel lock contention analysis test: Ok Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Tested-by:
-
Namhyung Kim authored
Likewise, add addr_filter BPF hash map and check it with the lock address. $ sudo ./perf lock con -ab -L tasklist_lock -- ./perf bench sched messaging # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.169 [sec] contended total wait max wait avg wait type caller 18 174.09 us 25.31 us 9.67 us rwlock:W do_exit+0x36d 5 32.34 us 10.87 us 6.47 us rwlock:R do_wait+0x8b 4 15.41 us 4.73 us 3.85 us rwlock:W release_task+0x6e Signed-off-by: -
Namhyung Kim authored
The -L/--lock-filter option is to filter only given locks. The locks can be specified by address or name (if exists). $ sudo ./perf lock record -a sleep 1 $ sudo ./perf lock con -l contended total wait max wait avg wait address symbol 57 1.11 ms 42.83 us 19.54 us ffff9f4140059000 15 280.88 us 23.51 us 18.73 us ffffffff9d007a40 jiffies_lock 1 20.49 us 20.49 us 20.49 us ffffffff9d0d50c0 rcu_state 1 9.02 us 9.02 us 9.02 us ffff9f41759e9ba0 $ sudo ./perf lock con -L jiffies_lock,rcu_state contended total wait max wait avg wait type caller 15 280.88 us 23.51 us 18.73 us spinlock tick_sched_do_timer+0x93 1 20.49 us 20.49 us 20.49 us spinlock __softirqentry_text_start+0xeb $ sudo ./perf lock con -L ffff9f4140059000 contended total wait max wait avg wait type caller 38 779.40 us 42.83 us 20.51 us spinlock worker_thread+0x50 11 216.30 us 39.87 us 19.66 us spinlock queue_work_on+0x39 8 118.13 us 20.51 us 14.77 us spinlock kthread+0xe5 Committer testing: # uname -a Linux quaco 6.0.12-200.fc36.x86_64 #1 SMP PREEMPT_DYNAMIC Thu Dec 8 17:15:53 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux # perf lock record ^C[ perf record: Woken up 1 times to write data ] # perf lock con -L jiffies_lock,rcu_state contended total wait max wait avg wait type caller # perf lock con contended total wait max wait avg wait type caller 1 9.06 us 9.06 us 9.06 us spinlock call_timer_fn+0x24 # perf lock con -L call ignore unknown symbol: call contended total wait max wait avg wait type caller 1 9.06 us 9.06 us 9.06 us spinlock call_timer_fn+0x24 # Signed-off-by: -
Namhyung Kim authored
Likewise, add type_filter BPF hash map and check it when user gave a lock type filter. $ sudo ./perf lock con -ab -Y rwlock -- ./perf bench sched messaging # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.203 [sec] contended total wait max wait avg wait type caller 15 156.19 us 19.45 us 10.41 us rwlock:W do_exit+0x36d 1 11.12 us 11.12 us 11.12 us rwlock:R do_wait+0x8b 1 5.09 us 5.09 us 5.09 us rwlock:W release_task+0x6e Signed-off-by: -
Namhyung Kim authored
The -Y/--type-filter option is to filter the result for specific lock types only. It can accept comma-separated values. Note that it would accept type names like one in the output. spinlock, mutex, rwsem:R and so on. For RW-variant lock types, it converts the name to the both variants. In other words, "rwsem" is same as "rwsem:R,rwsem:W". Also note that "mutex" has two different encoding - one for sleeping wait, another for optimistic spinning. Add "mutex-spin" entry for the lock_type_table so that we can add it for "mutex" under the table. $ sudo ./perf lock record -a -- ./perf bench sched messaging $ sudo ./perf lock con -E 5 -Y spinlock contended total wait max wait avg wait type caller 802 1.26 ms 11.73 us 1.58 us spinlock __wake_up_common_lock+0x62 13 787.16 us 105.44 us 60.55 us spinlock remove_wait_queue+0x14 12 612.96 us 78.70 us 51.08 us spinlock prepare_to_wait+0x27 114 340.68 us 12.61 us 2.99 us spinlock try_to_wake_up+0x1f5 83 226.38 us 9.15 us 2.73 us spinlock folio_lruvec_lock_irqsave+0x5e Committer notes: Make get_type_flag() return UINT_MAX for error instad of -1UL, as that function returns 'unsigned int' and we store the value on a 'unsigned int' 'flags' variable which makes clang unhappy: 35 98.23 fedora:37 : FAIL clang version 15.0.6 (Fedora 15.0.6-1.fc37) builtin-lock.c:2012:14: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned int' is always true [-Werror,-Wtautological-constant-out-of-range-compare] if (flags != -1UL) { ~~~~~ ^ ~~~~ builtin-lock.c:2021:14: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned int' is always true [-Werror,-Wtautological-constant-out-of-range-compare] if (flags != -1UL) { ~~~~~ ^ ~~~~ builtin-lock.c:2037:14: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned int' is always true [-Werror,-Wtautological-constant-out-of-range-compare] if (flags != -1UL) { ~~~~~ ^ ~~~~ 3 errors generated. Signed-off-by:
-
- 20 Dec, 2022 8 commits
-
-
Namhyung Kim authored
Move it out of get_type_str() so that we can reuse the table for others later. Signed-off-by:
-
Yang Jihong authored
Check the -q and -v options first to return earlier on error. Before: # perf probe -q -v test probe-definition(0): test symbol:test file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Error: -v and -q are exclusive. After: # perf probe -q -v test Error: -v and -q are exclusive. Fixes: 5e17b28f ("perf probe: Add --quiet option to suppress output result message") Reviewed-by:Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Yang Jihong <yangjihong1@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carsten Haitzler <carsten.haitzler@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <martin.lau@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lore.kernel.org/r/20221220035702.188413-4-yangjihong1@huawei.comSigned-off-by:
-
Yang Jihong authored
The data type of the verbose variable is integer and can be negative, replace improperly used cases in a unified manner: 1. if (verbose) => if (verbose > 0) 2. if (!verbose) => if (verbose <= 0) 3. if (XX && verbose) => if (XX && verbose > 0) 4. if (XX && !verbose) => if (XX && verbose <= 0) Reviewed-by:
-
Yang Jihong authored
perf debug: Set debug_peo_args and redirect_to_stderr variable to correct values in perf_quiet_option() When perf uses quiet mode, perf_quiet_option() sets the 'debug_peo_args' variable to -1, and display_attr() incorrectly determines the value of 'debug_peo_args'. As a result, unexpected information is displayed. Before: # perf record --quiet -- ls > /dev/null ------------------------------------------------------------ perf_event_attr: size 128 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|PERIOD read_format ID|LOST disabled 1 inherit 1 mmap 1 comm 1 freq 1 enable_on_exec 1 task 1 precise_ip 3 sample_id_all 1 exclude_guest 1 mmap2 1 comm_exec 1 ksymbol 1 bpf_event 1 ------------------------------------------------------------ ... After: # perf record --quiet -- ls > /dev/null # redirect_to_stderr is a similar problem. Fixes: f78eaef0 ("perf tools: Allow to force redirect pr_debug to stderr.") Fixes: ccd26741 ("perf tool: Provide an option to print perf_event_open args and return value") Suggested-by: -
Arnaldo Carvalho de Melo authored
To pick the changes in: 86bdf3eb ("KVM: Support dirty ring in conjunction with bitmap") That just rebuilds perf, as these patches don't add any new KVM ioctl to be harvested for the the 'perf trace' ioctl syscall argument beautifiers. This is also by now used by tools/testing/selftests/kvm/, a simple test build didn't succeed, but for another reason: lib/kvm_util.c: In function ‘vm_enable_dirty_ring’: lib/kvm_util.c:125:30: error: ‘KVM_CAP_DIRTY_LOG_RING_ACQ_REL’ undeclared (first use in this function); did you mean ‘KVM_CAP_DIRTY_LOG_RING’? 125 | if (vm_check_cap(vm, KVM_CAP_DIRTY_LOG_RING_ACQ_REL)) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | KVM_CAP_DIRTY_LOG_RING I'll send a separate patch for that. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Gavin Shan <gshan@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Link: http://lore.kernel.org/lkml/Y6H3b1Q4Msjy5Yz3@kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To pick the changes in these csets: ce883a2b ("powerpc/32: fix syscall wrappers with 64-bit arguments") That doesn't cause any changes in the perf tools. This table is used in tools perf to allow features as described in the last update to this file. This addresses this perf build warning: Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl' diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/Y6H0C5plZ4V4aiPm@kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To pick up the changes in: 97fa21f6 ("x86/resctrl: Move MSR defines into msr-index.h") 7420ae3b ("x86/intel_epb: Set Alder Lake N and Raptor Lake P normal EPB") Addressing these tools/perf build warnings: diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' That makes the beautification scripts to pick some new entries: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2022-12-20 14:28:40.893794072 -0300 +++ after 2022-12-20 14:28:54.831993914 -0300 @@ -266,6 +266,7 @@ [0xc0000104 - x86_64_specific_MSRs_offset] = "AMD64_TSC_RATIO", [0xc000010e - x86_64_specific_MSRs_offset] = "AMD64_LBR_SELECT", [0xc000010f - x86_64_specific_MSRs_offset] = "AMD_DBG_EXTN_CFG", + [0xc0000200 - x86_64_specific_MSRs_offset] = "IA32_MBA_BW_BASE", [0xc0000300 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_STATUS", [0xc0000301 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_CTL", [0xc0000302 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_STATUS_CLR", $ Now one can trace systemwide asking to see backtraces to where that MSR is being read/written, see this example with a previous update: # perf trace -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB" ^C# If we use -v (verbose mode) we can see what it does behind the scenes: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB" Using CPUID AuthenticAMD-25-21-0 0x6a0 0x6a8 New filter for msr:read_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313) 0x6a0 0x6a8 New filter for msr:write_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313) mmap size 528384B ^C# Example with a frequent msr: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2 Using CPUID AuthenticAMD-25-21-0 0x48 New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841) 0x48 New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841) mmap size 528384B Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols 0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __schedule ([kernel.kallsyms]) schedule ([kernel.kallsyms]) futex_wait_queue_me ([kernel.kallsyms]) futex_wait ([kernel.kallsyms]) do_futex ([kernel.kallsyms]) __x64_sys_futex ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) entry_SYSCALL_64_after_hwframe ([kernel.kallsyms]) __futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so) 0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __schedule ([kernel.kallsyms]) schedule_idle ([kernel.kallsyms]) do_idle ([kernel.kallsyms]) cpu_startup_entry ([kernel.kallsyms]) secondary_startup_64_no_verify ([kernel.kallsyms]) # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/lkml/Y6HyTOGRNvKfCVe4@kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To pick up the changes in: bc7ed4d3 ("drm/i915/perf: Apply Wa_18013179988") 81d5f7d9 ("drm/i915/perf: Add 32-bit OAG and OAR formats for DG2") 8133a6da ("drm/i915: enable PS64 support for DG2") b76c14c8 ("drm/i915/huc: better define HuC status getparam possible return values.") 94dfc73e ("treewide: uapi: Replace zero-length arrays with flexible-array members") That doesn't add any ioctl, so no changes in tooling. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Link: https://lore.kernel.org/lkml/Y6HukoRaZh2R4j5U@kernel.orgSigned-off-by:
-
- 19 Dec, 2022 16 commits
-
-
Arnaldo Carvalho de Melo authored
To pick the changes from: f8b435f9 ("fscrypt: remove unused Speck definitions") e0cefada ("fscrypt: Add SM4 XTS/CTS symmetric algorithm support") That don't result in any changes in tooling, just causes this to be rebuilt: CC /tmp/build/perf-urgent/trace/beauty/sync_file_range.o LD /tmp/build/perf-urgent/trace/beauty/perf-in.o addressing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h' diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Link: https://lore.kernel.org/lkml/Y6CHSS6Rn9YOqpAd@kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To pick the changes from: 5e85c4eb ("x86: KVM: Advertise AVX-IFMA CPUID to user space") af2872f6 ("x86: KVM: Advertise AMX-FP16 CPUID to user space") 6a19d7aa ("x86: KVM: Advertise CMPccXADD CPUID to user space") aaa65d17 ("x86/tsx: Add a feature bit for TSX control MSR support") b1599915 ("x86/cpufeatures: Move X86_FEATURE_CALL_DEPTH from bit 18 to bit 19 of word 11, to leave space for WIP X86_FEATURE_SGX_EDECCSSA bit") 16a7fe37 ("KVM/VMX: Allow exposing EDECCSSA user leaf function to KVM guest") 80e4c1cd ("x86/retbleed: Add X86_FEATURE_CALL_DEPTH") 7df54884 ("x86/bugs: Add "unknown" reporting for MMIO Stale Data") This only causes these perf files to be rebuilt: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Chang S. Bae <chang.seok.bae@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiaxi Chen <jiaxi.chen@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kai Huang <kai.huang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/lkml/Y6CD%2FIcEbDW5X%2FpN@kernel.org/Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To pick the changes from: 15e15d64 ("x86/cpufeatures: Add X86_FEATURE_XENPV to disabled-features.h") This only causes these perf files to be rebuilt: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h' diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h Cc: Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/Y6B2w3WqifB%2FV70T@kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To pick up fixes. Signed-off-by: -
Arnaldo Carvalho de Melo authored
The python3-setuptools package is needed to build the python binding, so that one can use things like: # ~acme/git/perf/tools/perf/python/twatch.py cpu: 6, pid: 4573, tid: 2184618 { type: exit, pid: 4573, ppid: 4172, tid: 2184618, ptid: 4172, time: 12563190090107} cpu: 24, pid: 4573, tid: 4573 { type: fork, pid: 4573, ppid: 4573, tid: 2190991e, ptid: 4573, time: 12563415289331} cpu: 29, pid: 4573, tid: 2190991e { type: comm, pid: 4573, tid: 2190991e, comm: StreamT~ns #401 } cpu: 29, pid: 4573, tid: 2190991e { type: comm, pid: 4573, tid: 2190991e, comm: StreamT~ns #401 } ^CTraceback (most recent call last): File "/var/home/acme/git/perf/tools/perf/python/twatch.py", line 61, in <module> main() File "/var/home/acme/git/perf/tools/perf/python/twatch.py", line 33, in main evlist.poll(timeout = -1) KeyboardInterrupt # That have 'import perf;'. But distros don't always have that python3-setuptools (or equivalent) installed, which was breaking the build. Just check if it is installed and emit a warning that such binding isn't being built and continue the build without it: With it: $ rpm -q python3-setuptools python3-setuptools-59.6.0-3.fc36.noarch $ rm -rf /tmp/build/perf; mkdir -p /tmp/build/perf $ make O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/var/home/acme/git/perf/tools/perf' <SNIP> ... libpython: [ on ] <SNIP> GEN /tmp/build/perf/python/perf.cpython-310-x86_64-linux-gnu.so <SNIP> $ ls -la /tmp/build/perf/python/perf.cpython-310-x86_64-linux-gnu.so -rwxr-xr-x. 1 acme acme 1609112 Dec 17 11:39 /tmp/build/perf/python/perf.cpython-310-x86_64-linux-gnu.so $ Without it: $ sudo rpm -e python3-setuptools $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf $ make O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/var/home/acme/git/perf/tools/perf' <SNIP> ... libpython: [ on ] <SNIP> $ ls -la /tmp/build/perf/python/perf.cpython-310-x86_64-linux-gnu.so ls: cannot access '/tmp/build/perf/python/perf.cpython-310-x86_64-linux-gnu.so': No such file or directory $ Reported-by:Linus Torvalds <torvalds@linux-foundation.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/Y53XHw3rlsaaUgOs@kernel.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull more nfsd updates from Chuck Lever: "This contains a number of crasher fixes that were not ready for the initial pull request last week. In particular, Jeff's patch attempts to address reference count underflows in NFSD's filecache, which have been very difficult to track down because there is no reliable reproducer. Common failure modes: https://bugzilla.kernel.org/show_bug.cgi?id=216691#c11 https://bugzilla.kernel.org/show_bug.cgi?id=216674#c6 https://bugzilla.redhat.com/show_bug.cgi?id=2138605 The race windows were found by inspection and the clean-ups appear sensible and pass regression testing, so we include them here in the hope that they address the problem. However we remain vigilant because we don't have 100% certainty yet that the problem is fully addressed. Summary: - Address numerous reports of refcount underflows in NFSD's filecache - Address a UAF in callback setup error handling - Address a UAF during server-to-server copy" * tag 'nfsd-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: NFSD: fix use-after-free in __nfs42_ssc_open() nfsd: under NFSv4.1, fix double svc_xprt_put on rpc_create failure nfsd: rework refcounting in filecache -
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "Most of the changes are a rework of the cmos driver by Rafael and fixes for issues found using static checkers. The removal of a driver leads to a reduction of the number of LOC of the subsystem. Removed driver: - davinci Updates: - convert i2c drivers to .probe_new - fix spelling mistakes and duplicated words in comments - cmos: rework wake setup and ACPI event handling - cros-ec: Limit RTC alarm range to fix alarmtimer - ds1347: fix century register handling - efi: wakeup support - isl12022: temperature sensor support - pcf85063: fix read_alarm and clkout - pcf8523: use stop bit to detect invalid time - pcf8563: use RTC_FEATURE_ALARM - snvs: be more flexible on LPSRT reads - many static checker fixes" * tag 'rtc-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (48 commits) rtc: ds1742: use devm_platform_get_and_ioremap_resource() rtc: mxc_v2: Add missing clk_disable_unprepare() rtc: rs5c313: correct some spelling mistakes rtc: at91rm9200: Fix syntax errors in comments rtc: remove duplicated words in comments rtc: rv3028: Use IRQ flags obtained from device tree if available rtc: ds1307: use sysfs_emit() to instead of scnprintf() rtc: isl12026: drop obsolete dependency on COMPILE_TEST dt-bindings: rtc: m41t80: Convert text schema to YAML one rtc: pcf85063: fix pcf85063_clkout_control rtc: rx6110: fix warning with !OF rtc: rk808: reduce 'struct rk808' usage rtc: msc313: Fix function prototype mismatch in msc313_rtc_probe() dt-bindings: rtc: convert rtc-meson.txt to dt-schema rtc: pic32: Move devm_rtc_allocate_device earlier in pic32_rtc_probe() rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe() rtc: pcf85063: Fix reading alarm rtc: pcf8523: fix for stop bit rtc: efi: Add wakeup support rtc: pcf8563: clear RTC_FEATURE_ALARM if no irq ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengineLinus Torvalds authored
Pull dmaengine updates from Vinod Koul: "New support: - Qualcomm SDM670, SM6115 and SM6375 GPI controller support - Ingenic JZ4755 dmaengine support - Removal of iop-adma driver Updates: - Tegra support for dma-channel-mask - at_hdmac cleanup and virt-chan support for this driver" * tag 'dmaengine-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (46 commits) dmaengine: Revert "dmaengine: remove s3c24xx driver" dmaengine: tegra: Add support for dma-channel-mask dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA dmaengine: idxd: Remove linux/msi.h include dt-bindings: dmaengine: qcom: gpi: add compatible for SM6375 dmaengine: idxd: Fix crc_val field for completion record dmaengine: at_hdmac: Convert driver to use virt-dma dmaengine: at_hdmac: Remove unused member of at_dma_chan dmaengine: at_hdmac: Rename "chan_common" to "dma_chan" dmaengine: at_hdmac: Rename "dma_common" to "dma_device" dmaengine: at_hdmac: Use bitfield access macros dmaengine: at_hdmac: Keep register definitions and structures private to at_hdmac.c dmaengine: at_hdmac: Set include entries in alphabetic order dmaengine: at_hdmac: Use pm_ptr() dmaengine: at_hdmac: Use devm_clk_get() dmaengine: at_hdmac: Use devm_platform_ioremap_resource dmaengine: at_hdmac: Use devm_kzalloc() and struct_size() dmaengine: at_hdmac: Introduce atc_get_llis_residue() dmaengine: at_hdmac: s/atc_get_bytes_left/atc_get_residue dmaengine: at_hdmac: Pass residue by address to avoid unnecessary implicit casts ... -
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwireLinus Torvalds authored
Pull soundwire updates from Vinod Koul: "This include bunch of Intel driver code reorganization and support for qcom v1.7.0 controller: - intel: reorganization of hw_ops callbacks, splitting files etc - qcom: support for v1.7.0 qcom controllers" * tag 'soundwire-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: intel: split auxdevice to different file soundwire: intel: add in-band wake callbacks in hw_ops soundwire: intel: add link power management callbacks in hw_ops soundwire: intel: add bus management callbacks in hw_ops soundwire: intel: add register_dai callback in hw_ops soundwire: intel: add debugfs callbacks in hw_ops soundwire: intel: start using hw_ops dt-bindings: soundwire: Convert text bindings to DT Schema soundwire: cadence: use dai_runtime_array instead of dma_data soundwire: cadence: rename sdw_cdns_dai_dma_data as sdw_cdns_dai_runtime soundwire: qcom: add support for v1.7 Soundwire Controller dt-bindings: soundwire: qcom: add v1.7.0 support soundwire: qcom: make reset optional for v1.6 controller soundwire: qcom: remove unused SWRM_SPECIAL_CMD_ID soundwire: dmi-quirks: add quirk variant for LAPBC710 NUC15
-
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phyLinus Torvalds authored
Pull phy updates from Vinod Koul: "This tme we have again a big pile of qcom-qmp-* changes, one new driver and bunch of new hardware support. New hardware support: - Allwinner H616 USB PHY and A100 DPHY support - TI J721s2, J784s4 and J721e support - Freescale i.MX8MP PCIe PHY support - New driver for Renesas Ethernet SERDES supporting R-Car S4-8 - Qualcomm SM8450 PCIe1 PHY support in EP mode - Qualcomm SC8280XP PCIe PHY support (including x4 mode) - Fixed Qualcomm SC8280XP USB4-USB3-DP PHY DT bindings Updates: - A big pile of updates on qcom-qmp-* drivers following the driver split and reorganization merged earlier - Phy order of API calls documentation update" * tag 'phy-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (174 commits) phy: ti: phy-j721e-wiz: add j721s2-wiz-10g module support dt-bindings: phy-j721e-wiz: add j721s2 compatible string phy: use devm_platform_get_and_ioremap_resource() phy: allwinner: phy-sun6i-mipi-dphy: Add the A100 DPHY variant phy: allwinner: phy-sun6i-mipi-dphy: Add a variant power-on hook phy: allwinner: phy-sun6i-mipi-dphy: Set the enable bit last phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional dt-bindings: sun6i-a31-mipi-dphy: Add the A100 DPHY variant dt-bindings: sun6i-a31-mipi-dphy: Add the interrupts property phy: qcom-qmp-pcie: drop redundant clock allocation phy: qcom-qmp-usb: drop redundant clock allocation phy: qcom-qmp: drop unused type header phy: qcom-qmp-usb: drop sc8280xp reference-clock source dt-bindings: phy: qcom,sc8280xp-qmp-usb3-uni: drop reference-clock source phy: qcom-qmp-combo: add support for updated sc8280xp binding phy: qcom-qmp-combo: rename DP_PHY register pointer phy: qcom-qmp-combo: rename common-register pointers phy: qcom-qmp-combo: clean up DP clock callbacks phy: qcom-qmp-combo: separate clock and provider registration phy: qcom-qmp-combo: add clock registration helper ... -
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu updates from Joerg Roedel: "Core code: - map/unmap_pages() cleanup - SVA and IOPF refactoring - Clean up and document return codes from device/domain attachment AMD driver: - Rework and extend parsing code for ivrs_ioapic, ivrs_hpet and ivrs_acpihid command line options - Some smaller cleanups Intel driver: - Blocking domain support - Cleanups S390 driver: - Fixes and improvements for attach and aperture handling PAMU driver: - Resource leak fix and cleanup Rockchip driver: - Page table permission bit fix Mediatek driver: - Improve safety from invalid dts input - Smaller fixes and improvements Exynos driver: - Fix driver initialization sequence Sun50i driver: - Remove IOMMU_DOMAIN_IDENTITY as it has not been working forever - Various other fixes" * tag 'iommu-updates-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (74 commits) iommu/mediatek: Fix forever loop in error handling iommu/mediatek: Fix crash on isr after kexec() iommu/sun50i: Remove IOMMU_DOMAIN_IDENTITY iommu/amd: Fix typo in macro parameter name iommu/mediatek: Remove unused "mapping" member from mtk_iommu_data iommu/mediatek: Improve safety for mediatek,smi property in larb nodes iommu/mediatek: Validate number of phandles associated with "mediatek,larbs" iommu/mediatek: Add error path for loop of mm_dts_parse iommu/mediatek: Use component_match_add iommu/mediatek: Add platform_device_put for recovering the device refcnt iommu/fsl_pamu: Fix resource leak in fsl_pamu_probe() iommu/vt-d: Use real field for indication of first level iommu/vt-d: Remove unnecessary domain_context_mapped() iommu/vt-d: Rename domain_add_dev_info() iommu/vt-d: Rename iommu_disable_dev_iotlb() iommu/vt-d: Add blocking domain support iommu/vt-d: Add device_block_translation() helper iommu/vt-d: Allocate pasid table in device probe path iommu/amd: Check return value of mmu_notifier_register() iommu/amd: Fix pci device refcount leak in ppr_notifier() ... -
Linus Torvalds authored
Merge tag 'loongarch-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Switch to relative exception tables - Add unaligned access support - Add alternative runtime patching mechanism - Add FDT booting support from efi system table - Add suspend/hibernation (ACPI S3/S4) support - Add basic STACKPROTECTOR support - Add ftrace (function tracer) support - Update the default config file * tag 'loongarch-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits) LoongArch: Update Loongson-3 default config file LoongArch: modules/ftrace: Initialize PLT at load time LoongArch/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support LoongArch/ftrace: Add HAVE_DYNAMIC_FTRACE_WITH_ARGS support LoongArch/ftrace: Add HAVE_DYNAMIC_FTRACE_WITH_REGS support LoongArch/ftrace: Add dynamic function graph tracer support LoongArch/ftrace: Add dynamic function tracer support LoongArch/ftrace: Add recordmcount support LoongArch/ftrace: Add basic support LoongArch: module: Use got/plt section indices for relocations LoongArch: Add basic STACKPROTECTOR support LoongArch: Add hibernation (ACPI S4) support LoongArch: Add suspend (ACPI S3) support LoongArch: Add processing ISA Node in DeviceTree LoongArch: Add FDT booting support from efi system table LoongArch: Use alternative to optimize libraries LoongArch: Add alternative runtime patching mechanism LoongArch: Add unaligned access support LoongArch: BPF: Add BPF exception tables LoongArch: Remove the .fixup section usage ...
-
https://github.com/c-sky/csky-linuxLinus Torvalds authored
Pull arch/csky updates from Guo Ren: - Revert rseq support - it wasn't ready - Add current_stack_pointer support - Typo fixup * tag 'csky-for-linus-6.2-rc1' of https://github.com/c-sky/csky-linux: Revert "csky: Add support for restartable sequence" Revert "csky: Fixup CONFIG_DEBUG_RSEQ" csky: Kconfig: Fix spelling mistake "Meory" -> "Memory" csky: add arch support current_stack_pointer
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc updates from Michael Ellerman: - Add powerpc qspinlock implementation optimised for large system scalability and paravirt. See the merge message for more details - Enable objtool to be built on powerpc to generate mcount locations - Use a temporary mm for code patching with the Radix MMU, so the writable mapping is restricted to the patching CPU - Add an option to build the 64-bit big-endian kernel with the ELFv2 ABI - Sanitise user registers on interrupt entry on 64-bit Book3S - Many other small features and fixes Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang, Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A. R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng, XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu, and Wolfram Sang. * tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits) powerpc/code-patching: Fix oops with DEBUG_VM enabled powerpc/qspinlock: Fix 32-bit build powerpc/prom: Fix 32-bit build powerpc/rtas: mandate RTAS syscall filtering powerpc/rtas: define pr_fmt and convert printk call sites powerpc/rtas: clean up includes powerpc/rtas: clean up rtas_error_log_max initialization powerpc/pseries/eeh: use correct API for error log size powerpc/rtas: avoid scheduling in rtas_os_term() powerpc/rtas: avoid device tree lookups in rtas_os_term() powerpc/rtasd: use correct OF API for event scan rate powerpc/rtas: document rtas_call() powerpc/pseries: unregister VPA when hot unplugging a CPU powerpc/pseries: reset the RCU watchdogs after a LPM powerpc: Take in account addition CPU node when building kexec FDT powerpc: export the CPU node count powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state powerpc/dts/fsl: Fix pca954x i2c-mux node names cxl: Remove unnecessary cxl_pci_window_alignment() selftests/powerpc: Fix resource leaks ...
-
Linus Torvalds authored
Merge tag 'mm-nonmm-stable-2022-12-17-20-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull fault-injection updates from Andrew Morton: "Some fault-injection improvements from Wei Yongjun which enable stacktrace filtering on x86_64" * tag 'mm-nonmm-stable-2022-12-17-20-32' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: fault-injection: make stacktrace filter works as expected fault-injection: make some stack filter attrs more readable fault-injection: skip stacktrace filtering by default fault-injection: allow stacktrace filter for x86-64
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull more mm updates from Andrew Morton: - A few late-breaking minor fixups - Two minor feature patches which were awkwardly dependent on mm-nonmm. I need to set up a new branch to handle such things. * tag 'mm-stable-2022-12-17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: MAINTAINERS: zram: zsmalloc: Add an additional co-maintainer mm/kmemleak: use %pK to display kernel pointers in backtrace mm: use stack_depot for recording kmemleak's backtrace maple_tree: update copyright dates for test code maple_tree: fix mas_find_rev() comment mm/gup_test: free memory allocated via kvcalloc() using kvfree()
-
- 17 Dec, 2022 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 mm updates from Dave Hansen: "New Feature: - Randomize the per-cpu entry areas Cleanups: - Have CR3_ADDR_MASK use PHYSICAL_PAGE_MASK instead of open coding it - Move to "native" set_memory_rox() helper - Clean up pmd_get_atomic() and i386-PAE - Remove some unused page table size macros" * tag 'x86_mm_for_6.2_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits) x86/mm: Ensure forced page table splitting x86/kasan: Populate shadow for shared chunk of the CPU entry area x86/kasan: Add helpers to align shadow addresses up and down x86/kasan: Rename local CPU_ENTRY_AREA variables to shorten names x86/mm: Populate KASAN shadow for entire per-CPU range of CPU entry area x86/mm: Recompute physical address for every page of per-CPU CEA mapping x86/mm: Rename __change_page_attr_set_clr(.checkalias) x86/mm: Inhibit _PAGE_NX changes from cpa_process_alias() x86/mm: Untangle __change_page_attr_set_clr(.checkalias) x86/mm: Add a few comments x86/mm: Fix CR3_ADDR_MASK x86/mm: Remove P*D_PAGE_MASK and P*D_PAGE_SIZE macros mm: Convert __HAVE_ARCH_P..P_GET to the new style mm: Remove pointless barrier() after pmdp_get_lockless() x86/mm/pae: Get rid of set_64bit() x86_64: Remove pointless set_64bit() usage x86/mm/pae: Be consistent with pXXp_get_and_clear() x86/mm/pae: Use WRITE_ONCE() x86/mm/pae: Don't (ab)use atomic64 mm/gup: Fix the lockless PMD access ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platformsLinus Torvalds authored
Pull MSI fixes from Marc Zyngier: "Thomas tasked me with sending out a few urgent fixes after the giant MSI rework that landed in 6.2, as both s390 and powerpc ended-up suffering from it (they do not use the full core code infrastructure, leading to these previously undetected issues): - Return MSI_XA_DOMAIN_SIZE as the maximum MSI index when the architecture does not make use of irq domains instead of returning 0, which is pretty limiting. - Check for the presence of an irq domain when validating the MSI iterator, as s390/powerpc won't have one. - Fix powerpc's MSI backends which fail to clear the descriptor's IRQ field on teardown, leading to a splat and leaked descriptors" * tag 'msi-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms: powerpc/msi: Fix deassociation of MSI descriptors genirq/msi: Return MSI_XA_DOMAIN_SIZE as the maximum MSI index when no domain is present genirq/msi: Check for the presence of an irq domain when validating msi_ctrl -
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsiLinus Torvalds authored
Pull HSI updates from Sebastian Reichel: - misc small fixes * tag 'hsi-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: omap_ssi_core: Fix error handling in ssi_init() headers: Remove some left-over license text in include/uapi/linux/hsi/ HSI: omap_ssi_core: fix possible memory leak in ssi_probe() HSI: omap_ssi_core: fix unbalanced pm_runtime_disable() HSI: ssi_protocol: Fix return type of ssip_pn_xmit()
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply and reset updates from Sebastian Reichel: - bq25890: add charge voltage/current support - bd99954: convert to linear range - convert all i2c drivers to use probe_new - misc fixes and cleanups * tag 'for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (51 commits) power: supply: fix null pointer dereferencing in power_supply_get_battery_info power: supply: bq25890: Fix usb-notifier probe and remove races power: supply: bq25890: Ensure pump_express_work is cancelled on remove power: supply: Fix refcount leak in rk817_charger_probe power: supply: bq25890: Only use pdata->regulator_init_data for vbus power: supply: ab8500: Fix error handling in ab8500_charger_init() power: supply: cw2015: Fix potential null-ptr-deref in cw_bat_probe() power: supply: z2_battery: Fix possible memleak in z2_batt_probe() power: supply: z2_battery: Convert to i2c's .probe_new() power: supply: ucs1002: Convert to i2c's .probe_new() power: supply: smb347: Convert to i2c's .probe_new() power: supply: sbs-manager: Convert to i2c's .probe_new() power: supply: sbs: Convert to i2c's .probe_new() power: supply: rt9455: Convert to i2c's .probe_new() power: supply: rt5033_battery: Convert to i2c's .probe_new() power: supply: max17042_battery: Convert to i2c's .probe_new() power: supply: max17040: Convert to i2c's .probe_new() power: supply: max14656: Convert to i2c's .probe_new() power: supply: ltc4162-l: Convert to i2c's .probe_new() power: supply: ltc2941: Convert to i2c's .probe_new() ...
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: - Add Advantech EC watchdog driver - Add support for MT6795 Helio X10 watchdog and toprgu - Add support for MT8188 watchdog device - Remove #ifdef guards for PM related functions - Other fixes and improvements * tag 'linux-watchdog-6.2-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: aspeed: Enable pre-timeout interrupt watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already running watchdog: rn5t618: add support for read out bootstatus watchdog: kempld: Remove #ifdef guards for PM related functions watchdog: omap: Remove #ifdef guards for PM related functions watchdog: twl4030: Remove #ifdef guards for PM related functions watchdog: at91rm9200: Remove #ifdef guards for PM related functions watchdog: Add Advantech EC watchdog driver dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT8173 dt-bindings: watchdog: mediatek,mtk-wdt: Add compatible for MT6795 dt-bindings: watchdog: mediatek: Convert mtk-wdt to json-schema watchdog: mediatek: mt8188: add wdt support dt-bindings: reset: mt8188: add toprgu reset-controller header file dt-bindings: watchdog: Add compatible for MediaTek MT8188 watchdog: mtk_wdt: Add support for MT6795 Helio X10 watchdog and toprgu
-
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-ledsLinus Torvalds authored
Pull LED updates from Pavel Machek: "Lee Jones offered his help with maintaining LEDs, thanks a lot. Plus, there are some bugfixes as a bonus" * tag 'leds-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: MAINTAINERS: include dt-bindings headers leds: qcom,pm8058-led: Convert to DT schema leds: use sysfs_emit() to instead of scnprintf() leds: is31fl319x: Fix setting current limit for is31fl319{0,1,3} MAINTAINERS: Add additional co-maintainer to LEDs leds: lp5523: fix out-of-bounds bug in lp5523_selftest() dt-bindings: leds: Add 'cpuX' to 'linux,default-trigger' led: qcom-lpg: Fix sleeping in atomic leds: max8997: Don't error if there is no pdata leds: lp55xx: remove variable j leds-pca955x: Remove the unused function pca95xx_num_led_regs()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Fix two build warnings on 32 bit platforms It seems the linux-next CI and 0-day bot are not testing enough 32 bit configurations, as soon as you merged the rdma pull request there were two instant reports of warnings on these sytems that I would have thought should have been covered by time in linux-next Anyhow, here are the fixes so people don't hit problems with -Werror" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/siw: Fix pointer cast warning RDMA/rxe: Fix compile warnings on 32-bit
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 updtaes from Andreas Gruenbacher: - Revert a change to delete_work_func() that has gone wrong in commit c412a97c ("gfs2: Use TRY lock in gfs2_inode_lookup for UNLINKED inodes"). - Avoid dequeuing GL_ASYNC glock holders twice by first checking if the holder is still queued. - gfs2: Always check the inode size of inline inodes when reading in inodes to prevent corrupt filesystem images from causing weid errors. - Properly handle a race between gfs2_create_inode() and gfs2_inode_lookup() that causes insert_inode_locked4() to return -EBUSY. - Fix and clean up the interaction between gfs2_create_inode() and gfs2_evict_inode() by completely handling the inode deallocation and destruction in gfs2_evict_inode(). - Remove support for glock holder auto-demotion as we have no current plans of using this feature again. - And a few more minor cleanups and clarifications. * tag 'gfs2-v6.1-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Remove support for glock holder auto-demotion (2) gfs2: Remove support for glock holder auto-demotion gfs2: Minor gfs2_try_evict cleanup gfs2: Partially revert gfs2_inode_lookup change gfs2: Add gfs2_inode_lookup comment gfs2: Uninline and improve glock_{set,clear}_object gfs2: Simply dequeue iopen glock in gfs2_evict_inode gfs2: Clean up after gfs2_create_inode rework gfs2: Avoid dequeuing GL_ASYNC glock holders twice gfs2: Make gfs2_glock_hold return its glock argument gfs2: Always check inode size of inline inodes gfs2: Cosmetic gfs2_dinode_{in,out} cleanup gfs2: Handle -EBUSY result of insert_inode_locked4 gfs2: Fix and clean up create / evict interaction gfs2: Clean up initialization of "ip" in gfs2_create_inode gfs2: Get rid of ghs[] in gfs2_create_inode gfs2: Add extra error check in alloc_dinode
-
Marc Zyngier authored
Since 2f2940d1 ("genirq/msi: Remove filter from msi_free_descs_free_range()"), the core MSI code relies on the msi_desc->irq field to have been cleared before the descriptor can be freed, as it indicates that there is no association with a device anymore. The irq domain code provides this guarantee, and so does s390, which is one of the two architectures not using irq domains for MSIs. Powerpc, however, is missing this particular requirements, leading in a splat and leaked MSI descriptors. Adding the now required irq reset to the handful of powerpc backends that implement MSIs fixes that particular problem. Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/70dab88e-6119-0c12-7c6a-61bcbe239f66@roeck-us.net
-
- 16 Dec, 2022 1 commit
-
-
Arnd Bergmann authored
The previous build fix left a remaining issue in configurations with 64-bit dma_addr_t on 32-bit architectures: drivers/infiniband/sw/siw/siw_qp_tx.c: In function 'siw_get_pblpage': drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 32 | return virt_to_page((void *)paddr); | ^ Use the same double cast here that the driver uses elsewhere to convert between dma_addr_t and void*. Fixes: 0d1b756a ("RDMA/siw: Pass a pointer to virt_to_page()") Link: https://lore.kernel.org/r/20221215170347.2612403-1-arnd@kernel.orgSigned-off-by:Arnd Bergmann <arnd@arndb.de> Acked-by:
Bernard Metzler <bmt@zurich.ibm.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com>
-
