- 09 Sep, 2022 40 commits
-
-
Alex Elder authored
In gsi_channel_trans_complete(), use the completed and pending IDs to determine whether there are any transactions in completed state. Similarly, in gsi_channel_trans_cancel_pending(), use the pending and committed IDs to mark pending transactions cancelled. Rearrange the logic a bit there for a simpler result. This removes the only user of list_last_entry_or_null(), so get rid of that macro. Remove the temporary warnings added by the previous commit. Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vladimir Oltean says: ==================== Standardized ethtool counters for Felix DSA driver The main purpose of this change set is to add reporting of structured ethtool statistics counters to the felix DSA driver (see patch 11/14 for details), as a prerequisite for extending these counters to the eMAC/pMAC defined by the IEEE MAC Merge layer. Along the way, the main purpose has diverged into multiple sub-purposes which are also tackled: - A bug fix patch submitted to "net" has made ocelot->stats_lock a spin lock, which is not an issue currently (all Ocelot switches are MMIO), but will be an issue for Colin Foster who is working on a SPI controlled Ocelot switch. We restore the hardware access to port stats to be sleepable. - PSFP (tc-gate, tc-police) tc-flower stats on Felix use a non-converged procedure to access the hardware counters, although the interface is very similar to what is used for the port counters. Benefit from the logic used for the port counters, which gains us 64-bit tc-flower stats that are resistant to overflows. - Also export the ndo_get_stats64 method used by the ocelot switchdev driver to Felix, so that ifconfig sees something hardware-based as well (but not 100% up to date). - Create a new ocelot_stats.c file which groups everything stats-related together. Along with this, also move some other topic-specific code, like FDB and PTP, out of the main ocelot.c. - Minimize the lines of code for the stats layout definitions. These changes alone cause the patch set to have an overall reduction of lines of code in the driver, even though we are adding new functionality as well. Tested the port counters with lockdep and friends, with some garden-variety traffic (ping, iperf3) and the PSFP counters with tools/testing/selftests/drivers/net/ocelot/psfp.sh. ==================== Signed-off-by: -
Vladimir Oltean authored
All switch families supported by the ocelot lib (ocelot, felix, seville) export the same registers so far. But for example felix also has TSN counters, while the others don't. To reduce the bloat even further, create an OCELOT_COMMON_STATS() macro which just lists all stats that are common between switches. The array elements are still replicated among all of vsc9959_stats_layout, vsc9953_stats_layout and ocelot_stats_layout. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
The current definition of struct ocelot_stat_layout is long-winded (4 lines per entry, and we have hundreds of entries), so we could make an effort to use the C preprocessor and reduce the line count. Create an implicit correspondence between enum ocelot_reg, which tells us the register address (SYS_COUNT_RX_OCTETS etc) and enum ocelot_stat which allows us to index the ocelot->stats array (OCELOT_STAT_RX_OCTETS etc), and don't require us to specify both when we define what stats each switch family has. Create an OCELOT_STAT() macro that pairs only an enum ocelot_stat to an enum ocelot_reg, and an OCELOT_STAT_ETHTOOL() macro which also contains a name exported to the unstructured ethtool -S stringset API. For now, we define all counters as having the OCELOT_STAT_ETHTOOL() kind, but we will add more counters in the future which are not exported to the unstructured ethtool -S. Signed-off-by:
-
Vladimir Oltean authored
The hardware counter is called C_TX_AGED, so rename SYS_COUNT_TX_AGING to SYS_COUNT_TX_AGED. This will become important since we want to minimize the way in which we declare struct ocelot_stat_layout elements, using the C preprocessor. Signed-off-by:
-
Vladimir Oltean authored
DSA is integrated with the new standardized ethtool -S --groups option, but the felix driver only exports unstructured statistics. Reuse the array of 64-bit statistics collected by ocelot_check_stats_work(), but just export select values from it. Since ocelot_check_stats_work() runs periodically to avoid 32-bit overflow, and the ethtool calling context is sleepable, we update the 64-bit stats one more time, to provide up-to-date values. The locking scheme with a mutex followed by a spinlock is a bit hard to digest, so we create and use a ocelot_port_stats_run() helper with a callback that populates the ethool stats group the caller is interested in. The exported stats are: ethtool -S swp0 --groups eth-phy ethtool -S swp0 --groups eth-mac ethtool -S swp0 --groups eth-ctrl ethtool -S swp0 --groups rmon ethtool --include-statistics --show-pause swp0 Signed-off-by:
-
Vladimir Oltean authored
We want to introduce elements kept in ocelot->stats that aren't exposed to the unstructured ethtool -S (so they won't have their name populated), but are otherwise checked for 32-bit wraparounds by ocelot_port_update_stats(). This isn't possible today because ocelot_prepare_stats_regions() skips over ocelot_stat_layout elements with no name. Now that we've changed struct ocelot_stat_layout to keep the absolute register address rather than the offset relative to SYS_CNT, we can make use of the unpopulated "reg" value of 0 to mean that the counter isn't present on the current switch revision, and skip it from the preparation of bulk regions. Signed-off-by:
-
Vladimir Oltean authored
Move the logic from the ocelot switchdev driver's ocelot_get_stats64() method to the common switch lib and reuse it for the DSA driver. Signed-off-by:
-
Vladimir Oltean authored
Decongest ocelot.c a bit more by moving all PTP related logic (including timestamp processing and PTP packet traps) to ocelot_ptp.c. Signed-off-by:
-
Vladimir Oltean authored
ocelot_port_fdb_do_dump() is only used by ocelot_net.c, so move it there. Signed-off-by:
-
Vladimir Oltean authored
The main C file of the ocelot switch lib, ocelot.c, is getting larger and larger, and there are plans to add more logic related to stats. So it seems like an appropriate moment to split the statistics code to a new file. Signed-off-by:
-
Vladimir Oltean authored
Create a clear ordering of the files used to compile the switch lib and the switchdev driver. Signed-off-by:
-
Vladimir Oltean authored
if_link.h says: * @rx_dropped: Number of packets received but not processed, * e.g. due to lack of resources or unsupported protocol. * For hardware interfaces this counter may include packets discarded * due to L2 address filtering but should not include packets dropped * by the device due to buffer exhaustion which are counted separately in * @rx_missed_errors (since procfs folds those two counters together). Currently we report "stats->rx_dropped = dev->stats.rx_dropped", the latter being incremented by various entities in the stack. This is not wrong, but we'd like to move ocelot_get_stats64() in the common ocelot switch lib which is independent of struct net_device. To do that, report the hardware RX drop counters instead. These drops are due to policer action, or due to no destinations. When we have no memory in the queue system, report this through rx_missed_errors, as instructed. Signed-off-by:
-
Vladimir Oltean authored
The Felix PSFP counters suffer from the same problem as the ocelot ndo_get_stats64 ones - they are 32-bit, so they can easily overflow and this can easily go undetected. Add a custom hook in ocelot_check_stats_work() through which driver specific actions can be taken, and update the stats for the existing PSFP filters from that hook. Previously, vsc9959_psfp_filter_add() and vsc9959_psfp_filter_del() were serialized with respect to each other via rtnl_lock(). However, with the new entry point into &psfp->sfi_list coming from the periodic worker, we now need an explicit mutex to serialize access to these lists. We used to keep a struct felix_stream_filter_counters on stack, through which vsc9959_psfp_stats_get() - a FLOW_CLS_STATS callback - would retrieve data from vsc9959_psfp_counters_get(). We need to become smarter about that in 3 ways: - we need to keep a persistent set of counters for each stream instead of keeping them on stack - we need to promote those counters from u32 to u64, and create a procedure that properly keeps 64-bit counters. Since we clear the hardware counters anyway, and we poll every 2 seconds, a simple increment of a u64 counter with a u32 value will perfectly do the job. - FLOW_CLS_STATS also expect incremental counters, so we also need to zeroize our u64 counters every time sch_flower calls us Signed-off-by:
-
Vladimir Oltean authored
To support SPI-controlled switches in the future, access to SYS_STAT_CFG_STAT_VIEW needs to be done outside of any spinlock protected region, but it still needs to be serialized (by a mutex). Split the ocelot->stats_lock spinlock into a mutex that serializes indirect access to hardware registers (ocelot->stat_view_lock) and a spinlock that serializes access to the u64 ocelot->stats array. Signed-off-by:
-
Vladimir Oltean authored
TSN stream (802.1Qci, 802.1CB) filters are also accessed through STAT_VIEW, just like the port registers, but these counters are per stream, rather than per port. So we don't keep them in ocelot_port_update_stats(). What we can do, however, is we can create register definitions for them just like we have for the port counters, and delete the last remaining user of the SYS_CNT register + a group index (read_gix). Signed-off-by:
-
David S. Miller authored
Zhengchao Shao says: ==================== net: refactor the walk and lookup hook functions in tc_action_ops The implementation logic of the walk/lookup hook function in each action module is the same. Therefore, the two functions can be reconstructed. When registering tc_action_ops of each action module, the corresponding net_id is saved to tc_action_ops. In this way, the net_id of the corresponding module can be directly obtained in act_api without executing the specific walk and lookup hook functions. Then, generic functions can be added to replace the walk and lookup hook functions of each action module. Last, modify each action module in alphabetical order. Reserve the walk and lookup interfaces and delete them when they are no longer used. This patchset has been tested by using TDC, and I will add selftest in other patchset. Last, thanks to Jamal Hadi Salim and Cong Wang for their advice. --- v3: remove hole from the structure tc_action_ops v2: save the net_id of each TC action module to the tc_action_ops structure ==================== Signed-off-by: -
Zhengchao Shao authored
tcf_vlan_walker() and tcf_vlan_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Zhengchao Shao authored
tunnel_key_walker() and tunnel_key_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_skbmod_walker() and tcf_skbmod_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_skbedit_walker() and tcf_skbedit_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_simp_walker() and tcf_simp_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_sample_walker() and tcf_sample_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_police_walker() and tcf_police_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_pedit_walker() and tcf_pedit_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_nat_walker() and tcf_nat_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_mpls_walker() and tcf_mpls_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_mirred_walker() and tcf_mirred_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_ipt_walker()/tcf_xt_walker() and tcf_ipt_search()/tcf_xt_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_ife_walker() and tcf_ife_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_gate_walker() and tcf_gate_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_gact_walker() and tcf_gact_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_ctinfo_walker() and tcf_ctinfo_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_ct_walker() and tcf_ct_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_csum_walker() and tcf_csum_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_connmark_walker() and tcf_connmark_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
tcf_bpf_walker() and tcf_bpf_search() do the same thing as generic walk/search function, so remove them. Signed-off-by:
-
Zhengchao Shao authored
Being able to get tc_action_net by using net_id stored in tc_action_ops and execute the generic walk/search function, add __tcf_generic_walker() and __tcf_idr_search() helpers. Signed-off-by:
-
Zhengchao Shao authored
Each tc action module has a corresponding net_id, so put net_id directly into the structure tc_action_ops. Signed-off-by:
-
David S. Miller authored
Raju Lakkaraju says: ==================== net: lan743x: Fix to use multiqueue start/stop APIs This patch series address the fix to use multiqueue start/stop APIs and Add Rx IP and TCP checksum offload Changes: ======== V1 -> V2: - Fix the sparse warnings V0 -> V1: - Remove chip SKU check conditionals - Update the changes description ==================== Signed-off-by:
-
