- 15 May, 2018 40 commits
-
-
Eric Huang authored
VEGAM specific changes for smu7: 1. add avfs control. 2. add a smc message defferent as smu7. 3. don't switch mc arb memory timing. 4. update LCAC_MC0/1_CNTL value. Signed-off-by:
Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Eric Huang authored
The smumgr handles communication between the driver and the SMU for power management. v2: fix typo (Alex) Signed-off-by:
-
Eric Huang authored
Add functionality to fetch gpio table from vbios. Signed-off-by:
-
Eric Huang authored
used for calculating memory clocks in powerplay. v2: handle endian swapping of atom data (Alex) Signed-off-by:
-
Eric Huang authored
Signed-off-by:
-
Eric Huang authored
Signed-off-by:
-
Harry Wentland authored
Some eDP displays use the extra link rate table to advertise link rate support. If they do that they don't need to provide link rate through the usual registers. Since we don't currently have support for the extra link rate table default to HBR2 for the display in this. Note that this is a HACK. Ultimately we need to teach DC to use the extra link rate table. Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Acked-by:
-
Alex Deucher authored
DC is preferred. Signed-off-by: -
Jerry (Fangzhi) Zuo authored
Add CHIP_VEGAM Signed-off-by:
Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by:
-
Jerry (Fangzhi) Zuo authored
Implement device IDs for VEGAM Signed-off-by:
-
Leo Liu authored
Signed-off-by:
Leo Liu <leo.liu@amd.com> Reviewed-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
v2: use proper register rather than hardcoding. Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
Directly loaded by VBIOS Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Leo Liu authored
Signed-off-by:
-
Mathieu Malaterre authored
AGP mode is unstable on PowerPC. Symptoms are generally of the form: [ 1228.795711] radeon 0000:00:10.0: ring 0 stalled for more than 10240msec Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
-
Rex Zhu authored
when bit14 in module parameter ppfeaturemask was set. od feature will be enabled on Vega10 except vbios not support. user can read od range by reading sysfs pp_od_clk_voltage, cat pp_od_clk_voltage OD_SCLK: 0: 852Mhz 800mV 1: 991Mhz 900mV 2: 1138Mhz 950mV 3: 1269Mhz 1000mV 4: 1348Mhz 1050mV 5: 1399Mhz 1100mV 6: 1440Mhz 1150mV 7: 1500Mhz 1200mV OD_MCLK: 0: 167Mhz 800mV 1: 500Mhz 800mV 2: 800Mhz 950mV 3: 945Mhz 1000mV OD_RANGE: SCLK: 852MHz 2200MHz MCLK: 167MHz 1500MHz VDDC: 800mV 1200mV and can configure the clock/voltage by writing pp_od_clk_voltage for example: echo "s 0 900 820">pp_od_clk_voltage to change the sclk/vddc to 900MHz and 820 mV in dpm level0. echo "r" to change the clk/voltage to default value. echo "c">pp_od_clk_voltage to commit the change v2: squash in warning fix (Alex) Reviewed-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Luc Van Oostenryck authored
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Reviewed-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
-
Luc Van Oostenryck authored
The method struct drm_connector_helper_funcs::mode_valid is defined as returning an 'enum drm_mode_status' but the driver implementation for this method uses an 'int' for it. Fix this by using 'enum drm_mode_status' in the driver too. Signed-off-by:
-
Luc Van Oostenryck authored
The method struct vga_switcheroo_handler::get_client_id() is defined as returning an 'enum vga_switcheroo_client_id' but the implementation in this driver, radeon_atpx_get_client_id(), returns an 'int'. Fix this by returning 'enum vga_switcheroo_client_id' in this driver too. Signed-off-by:
-
Luc Van Oostenryck authored
The method struct vga_switcheroo_handler::get_client_id() is defined as returning an 'enum vga_switcheroo_client_id' but the implementation in this driver, amdgpu_atpx_get_client_id(), returns an 'int'. Fix this by returning 'enum vga_switcheroo_client_id' in this driver too. Signed-off-by:
-
welu authored
1. support more than 8 values when setting get_pp_dpm_mclk/ sclk/pcie, the former design just parse command format like "echo xxxx > pp_dpm_sclk" and current can parse "echo xx xxx xxxx > pp_dpm_sclk" whose operation is more user-friendly and convinent and can offer more values; 2. be compatible with former design like "xx". 3. add DOC: pp_dpm_sclk pp_dpm_mclk pp_dpm_pcie Bug:KFD-385 Signed-off-by:
welu <wei.lu2@amd.com> Reviewed-by:
-
Nicolai Hähnle authored
Otherwise, the SQ may skip some of the register writes, or shader waves may be allocated where we don't expect them, so that as a result we don't actually reset all of the register SRAMs. This can lead to spurious ECC errors later on if a shader uses an uninitialized register. Signed-off-by:
Nicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by:
-
Junwei Zhang authored
Signed-off-by:
Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by:
David Zhou <david1.zhou@amd.com> Signed-off-by:
-
