- 12 Jun, 2023 9 commits
-
-
Matthieu Baerts authored
IPTables commands using 'iptables-nft' fail on old kernels, at least 5.15 because it doesn't see the default IPTables chains: $ iptables -L iptables/1.8.2 Failed to initialize nft: Protocol not supported As a first step before switching to NFTables, we can use iptables-legacy if available. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 8d014eaa ("selftests: mptcp: add ADD_ADDR timeout test case") Cc: stable@vger.kernel.org Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. A new function is now available to easily detect if a feature is missing by looking at the kernel version. That's clearly not ideal and this kind of check should be avoided as soon as possible. But sometimes, there are no external sign that a "feature" is available or not: internal behaviours can change without modifying the uAPI and these selftests are verifying the internal behaviours. Sometimes, the only (easy) way to verify if the feature is present is to run the test but then the validation cannot determine if there is a failure with the feature or if the feature is missing. Then it looks better to check the kernel version instead of having tests that can never fail. In any case, we need a solution not to have a whole selftest being marked as failed just because one sub-test has failed. Note that this env var car be set to 1 not to do such check and run the linked sub-test: SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK. This new helper is going to be used in the following commits. In order to ease the backport of such future patches, it would be good if this patch is backported up to the introduction of MPTCP selftests, hence the Fixes tag below: this type of check was supposed to be done from the beginning. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 048d19d4 ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Signed-off-by:
-
Jakub Kicinski authored
Maxime Chevallier says: ==================== fixes for Q-USGMII speeds and autoneg This is the second version of a small changeset for QUSGMII support, fixing inconsistencies in reported max speed and control word parsing. As reported here [1], there are some inconsistencies for the Q-USGMII mode speeds and configuration. The first patch in this fixup series makes so that we correctly report the max speed of 1Gbps for this mode. The second patch uses a dedicated helper to decode the control word. This is necessary as although USGMII control words are close to USXGMII, they don't support the same speeds. [1] : https://lore.kernel.org/netdev/ZHnd+6FUO77XFJvQ@shell.armlinux.org.uk/ ==================== Link: https://lore.kernel.org/r/20230609080305.546028-1-maxime.chevallier@bootlin.comSigned-off-by:
-
Maxime Chevallier authored
Q-USGMII is a derivative of USGMII, that uses a specific formatting for the control word. The layout is close to the USXGMII control word, but doesn't support speeds over 1Gbps. Use a dedicated decoding logic for the USGMII control word, re-using USXGMII definitions but only considering 10/100/1000Mbps speeds Fixes: 5e61fe15 ("net: phy: Introduce QUSGMII PHY mode") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Maxime Chevallier authored
Q-USGMII is the quad port version of USGMII, and supports a max speed of 1Gbps on each line. Make so that phylink_interface_max_speed() reports this information correctly. Fixes: ae0e4bb2 ("net: phylink: Adjust link settings based on rate matching") Signed-off-by:
-
Dan Carpenter authored
The sctp_sf_eat_auth() function is supposed to enum sctp_disposition values and returning a kernel error code will cause issues in the caller. Change -ENOMEM to SCTP_DISPOSITION_NOMEM. Fixes: 65b07e5d ("[SCTP]: API updates to suport SCTP-AUTH extensions.") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Acked-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The sctp_sf_eat_auth() function is supposed to return enum sctp_disposition values but if the call to sctp_ulpevent_make_authkey() fails, it returns -ENOMEM. This results in calling BUG() inside the sctp_side_effects() function. Calling BUG() is an over reaction and not helpful. Call WARN_ON_ONCE() instead. This code predates git. Signed-off-by:
-
Hangbin Liu authored
The commit 59a0b022 ("ipvlan: Make skb->skb_iif track skb->dev for l3s mode") fixed ipvlan bonded dev checking by updating skb skb_iif. This fix works for IPv4, as in raw_v4_input() the dif is from inet_iif(skb), which is skb->skb_iif when there is no route. But for IPv6, the fix is not enough, because in ipv6_raw_deliver() -> raw_v6_match(), the dif is inet6_iif(skb), which is returns IP6CB(skb)->iif instead of skb->skb_iif if it's not a l3_slave. To fix the IPv6 part issue. Let's set IP6CB(skb)->iif to correct ifindex. BTW, ipvlan handles NS/NA specifically. Since it works fine, I will not reset IP6CB(skb)->iif when addr->atype is IPVL_ICMPV6. Fixes: c675e06a ("ipvlan: decouple l3s mode dependencies from other modes") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2196710Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by:
-
Jakub Kicinski authored
When compiling YNL generated code compiler complains about array-initializer-out-of-bounds. Turns out the MAX value for STATS_GRP uses the value for STATS. This may lead to random corruptions in user space (kernel itself doesn't use this value as it never parses stats). Fixes: f09ea6fb ("ethtool: add a new command for reading standard stats") Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
- 10 Jun, 2023 23 commits
-
-
David Christensen authored
In the last step of the EEH recovery process, the EEH driver calls into bnx2x_io_resume() to re-initialize the NIC hardware via the function bnx2x_nic_load(). If an error occurs during bnx2x_nic_load(), OS and hardware resources are released and an error code is returned to the caller. When called from bnx2x_io_resume(), the return code is ignored and the network interface is brought up unconditionally. Later attempts to send a packet via this interface result in a page fault due to a null pointer reference. This patch checks the return code of bnx2x_nic_load(), prints an error message if necessary, and does not enable the interface. Signed-off-by:
David Christensen <drc@linux.vnet.ibm.com> Reviewed-by:
Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller authored
netfilter pull request 23-06-08 Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter fixes for net: 1) Add commit and abort set operation to pipapo set abort path. 2) Bail out immediately in case of ENOMEM in nfnetlink batch. 3) Incorrect error path handling when creating a new rule leads to dangling pointer in set transaction list. ==================== Signed-off-by: -
Dmitry Mastykin authored
There is a shift wrapping bug in this code on 32-bit architectures. NETLBL_CATMAP_MAPTYPE is u64, bitmap is unsigned long. Every second 32-bit word of catmap becomes corrupted. Signed-off-by:
Dmitry Mastykin <dmastykin@astralinux.ru> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
David S. Miller authored
Naveen Mamindlapalli says: ==================== RVU NIX AF driver fixes This patch series contains few fixes to the RVU NIX AF driver. The first patch modifies the driver check to validate whether the req count for contiguous and non-contiguous arrays is less than the maximum limit. The second patch fixes HW lbk interface link credit programming. ==================== Signed-off-by: -
Nithin Dabilpuram authored
Fix LBK link credits on CN10K to be same as CN9K i.e 16 * MAX_LBK_DATA_RATE instead of current scheme of calculation based on LBK buf length / FIFO size. Fixes: 6e54e1c5 ("octeontx2-af: cn10K: Add MTU configuration") Signed-off-by:
Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by:
Naveen Mamindlapalli <naveenm@marvell.com> Reviewed-by:
-
Satha Rao authored
txschq_alloc response have two different arrays to store continuous and non-continuous schedulers of each level. Requested count should be checked for each array separately. Fixes: 5d9b976d ("octeontx2-af: Support fixed transmit scheduler topology") Signed-off-by:
Satha Rao <skoteshwar@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-06-08 (ice) This series contains updates to ice driver only. Simon Horman stops null pointer dereference for GNSS error path. Kamil fixes memory leak when downing interface when XDP is enabled. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix XDP memory leak when NIC is brought up and down ice: Don't dereference NULL in ice_gnss_read error path ==================== Link: https://lore.kernel.org/r/20230608200051.451752-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Ahmed Zaki authored
Enable more than 32 IRQs by removing the u32 bit mask in iavf_irq_enable_queues(). There is no need for the mask as there are no callers that select individual IRQs through the bitmask. Also, if the PF allocates more than 32 IRQs, this mask will prevent us from using all of them. Modify the comment in iavf_register.h to show that the maximum number allowed for the IRQ index is 63 as per the iAVF standard 1.0 [1]. link: [1] https://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/ethernet-adaptive-virtual-function-hardware-spec.pdf Fixes: 5eae00c5 ("i40evf: main driver core") Signed-off-by:
Ahmed Zaki <ahmed.zaki@intel.com> Tested-by:
Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Reviewed-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230608200226.451861-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Matthieu Baerts says: ==================== selftests: mptcp: skip tests not supported by old kernels (part 2) After a few years of increasing test coverage in the MPTCP selftests, we realised [1] the last version of the selftests is supposed to run on old kernels without issues. Supporting older versions is not that easy for this MPTCP case: these selftests are often validating the internals by checking packets that are exchanged, when some MIB counters are incremented after some actions, how connections are getting opened and closed in some cases, etc. In other words, it is not limited to the socket interface between the userspace and the kernelspace. In addition to that, the current MPTCP selftests run a lot of different sub-tests but the TAP13 protocol used in the selftests don't support sub-tests: one failure in sub-tests implies that the whole selftest is seen as failed at the end because sub-tests are not tracked. It is then important to skip sub-tests not supported by old kernels. To minimise the modifications and reduce the complexity to support old versions, the idea is to look at external signs and skip the whole selftests or just some sub-tests before starting them. This cannot be applied in all cases. This second part focuses on marking different sub-tests as skipped if some MPTCP features are not supported. A few techniques are used here: - Before starting some tests: - Check if a file (sysctl knob) is present: that's what patch 13/14 is doing for the userspace PM feature. - Check if a symbol is present in /proc/kallsyms: patch 1/14 adds some helpers in mptcp_lib.sh to ease its use. Then these helpers are used in patches 2, 3, 4, 10, 11 and 14/14. - Set a flag and get the status to check if a feature is supported: patch 8/14 is doing that with the 'fullmesh' flag. - After having launched the tests: - Retrieve the counters after a test and check if they are different than 0. Similar to the check with the flag, that's not ideal but in this case, the counters were already present before the introduction of MPTCP but they have been supported by MPTCP sockets only later. Patches 5 and 6/14 are using this technique. Before skipping tests, SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var value is checked: if it is set to 1, the test is marked as "failed" instead of "skipped". MPTCP public CI expects to have all features supported and it sets this env var to 1 to catch regressions in these new checks. Patches 7/14 and 9/14 are a bit different because they don't skip tests: - Patch 7/14 retrieves the default values instead of using hardcoded ones because these default values have been modified at some points. Then the comparisons are done with the default values. - patch 9/14 relaxes the expected returned size from MPTCP's getsockopt because the different structures gathering various info can get new fields and get bigger over time. We cannot expect that the userspace is using the same structure as the kernel. Patch 12/14 marks the test as "skipped" instead of "failed" if the "ip" tool is not available. In this second part, the "mptcp_join" selftest is not modified yet. This will come soon after in the third part with quite a few patches. Link: https://lore.kernel.org/stable/CA+G9fYtDGpgT4dckXD-y-N92nqUxuvue_7AtDdBcHrbOMsDZLg@mail.gmail.com/ [1] Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 ==================== Link: https://lore.kernel.org/r/20230608-upstream-net-20230608-mptcp-selftests-support-old-kernels-part-2-v1-0-20997a6fd841@tessares.netSigned-off-by: -
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the new listener events linked to the path-manager introduced by commit f8c9dfbd ("mptcp: add pm listener events"). It is possible to look for "mptcp_event_pm_listener" in kallsyms to know in advance if the kernel supports this feature and skip these sub-tests if the feature is not supported. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 6c73008a ("selftests: mptcp: listener test for userspace PM") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the MPTCP Userspace PM introduced by commit 4638de5a ("mptcp: handle local addrs announced by userspace PMs"). We can skip all these tests if the feature is not supported simply by looking for the MPTCP pm_type's sysctl knob. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 259a834f ("selftests: mptcp: functional tests for the userspace PM type") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
When a required tool is missing, the return code 4 (SKIP) should be returned instead of 1 (FAIL). Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 259a834f ("selftests: mptcp: functional tests for the userspace PM type") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is TCP_INQ cmsg support introduced in commit 2c9e7765 ("mptcp: add TCP_INQ cmsg support"). It is possible to look for "mptcp_ioctl" in kallsyms because it was needed to introduce the mentioned feature. We can skip these tests and not set TCPINQ option if the feature is not supported. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 5cbd886c ("selftests: mptcp: add TCP_INQ support") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP connections introduced by commit 55c42fa7 ("mptcp: add MPTCP_INFO getsockopt") and the following ones. It is possible to look for "mptcp_diag_fill_info" in kallsyms because it is introduced by the mentioned feature. So we can know in advance if the feature is supported and skip the sub-test if not. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ce997912 ("selftests: mptcp: add mptcp getsockopt test cases") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP connections introduced by commit 55c42fa7 ("mptcp: add MPTCP_INFO getsockopt") and the following ones. We cannot guess in advance which sizes the kernel will returned: older kernel can returned smaller sizes, e.g. recently the tcp_info structure has been modified in commit 71fc7047 ("tcp: add rcv_wnd and plb_rehash to TCP_INFO") where a new field has been added. The userspace can also expect a smaller size if it is compiled with old uAPI kernel headers. So for these sizes, we can only check if they are above a certain threshold, 0 for the moment. We can also only compared sizes with the ones set by the kernel. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ce997912 ("selftests: mptcp: add mptcp getsockopt test cases") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the fullmesh flag that can be given to the MPTCP in-kernel path-manager and introduced in commit 2843ff6f ("mptcp: remote addresses fullmesh"). If the flag is not visible in the dump after having set it, we don't check the content. Note that if we expect to have this feature and SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, we always check the content to avoid regressions. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 6da1dfdd ("selftests: mptcp: add set_flags tests in pm_netlink.sh") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the checks of the default limits returned by the MPTCP in-kernel path-manager. The default values have been modified by commit 72bcbc46 ("mptcp: increase default max additional subflows to 2"). Instead of comparing with hardcoded values, we can get the default one and compare with them. Note that if we expect to have the latest version, we continue to check the hardcoded values to avoid unexpected behaviour changes. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: eedbc685 ("selftests: add PM netlink functional tests") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the reporting of the MPTCP sockets being used, introduced by commit c558246e ("mptcp: add statistics for mptcp socket in use"). Similar to the parent commit, it looks like there is no good pre-check to do here, i.e. dedicated function available in kallsyms. Instead, we try to get info and if nothing is returned, the test is marked as skipped. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: e04a30f7 ("selftest: mptcp: add test for mptcp socket in use") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the listen diag dump support introduced by commit 4fa39b70 ("mptcp: listen diag dump support"). It looks like there is no good pre-check to do here, i.e. dedicated function available in kallsyms. Instead, we try to get info if nothing is returned, the test is marked as skipped. That's not ideal because something could be wrong with the feature and instead of reporting an error, the test could be marked as skipped. If we know in advanced that the feature is supposed to be supported, the tester can set SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var to 1: in this case the test will report an error instead of marking the test as skipped if nothing is returned. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: f2ae0fa6 ("selftests/mptcp: add diag listen tests") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of TCP_FASTOPEN socket option with MPTCP connections introduced by commit 4ffb0a02 ("mptcp: add TCP_FASTOPEN sock option"). It is possible to look for "mptcp_fastopen_" in kallsyms to know if the feature is supported or not. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ca7ae891 ("selftests: mptcp: mptfo Initiator/Listener") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the full support of disconnections from the userspace introduced by commit b29fcfb5 ("mptcp: full disconnect implementation"). It is possible to look for "mptcp_pm_data_reset" in kallsyms because a preparation patch added it to ease the introduction of the mentioned feature. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 05be5e27 ("selftests: mptcp: add disconnect tests") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of IP(V6)_TRANSPARENT socket option with MPTCP connections introduced by commit c9406a23 ("mptcp: sockopt: add SOL_IP freebind & transparent options"). It is possible to look for "__ip_sock_set_tos" in kallsyms because IP(V6)_TRANSPARENT socket option support has been added after TOS support which came with the required infrastructure in MPTCP sockopt code. To support TOS, the following function has been exported (T). Not great but better than checking for a specific kernel version. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 5fb62e9c ("selftests: mptcp: add tproxy test case") Cc: stable@vger.kernel.org Signed-off-by:
-
Matthieu Baerts authored
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. New functions are now available to easily detect if a certain feature is missing by looking at kallsyms. These new helpers are going to be used in the following commits. In order to ease the backport of such future patches, it would be good if this patch is backported up to the introduction of MPTCP selftests, hence the Fixes tag below: this type of check was supposed to be done from the beginning. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 048d19d4 ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Signed-off-by:
-
- 09 Jun, 2023 8 commits
-
-
Lee Jones authored
In the event of a failure in tcf_change_indev(), u32_set_parms() will immediately return without decrementing the recently incremented reference counter. If this happens enough times, the counter will rollover and the reference freed, leading to a double free which can be used to do 'bad things'. In order to prevent this, move the point of possible failure above the point where the reference counter is incremented. Also save any meaningful return values to be applied to the return data at the appropriate point in time. This issue was caught with KASAN. Fixes: 705c7091 ("net: sched: cls_u32: no need to call tcf_exts_change for newly allocated struct") Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Lee Jones <lee@kernel.org> Reviewed-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Zhengchao Shao authored
As shown in [1], out-of-bounds access occurs in two cases: 1)when the qdisc of the taprio type is used to replace the previously configured taprio, count and offset in tc_to_txq can be set to 0. In this case, the value of *txq in taprio_next_tc_txq() will increases continuously. When the number of accessed queues exceeds the number of queues on the device, out-of-bounds access occurs. 2)When packets are dequeued, taprio can be deleted. In this case, the tc rule of dev is cleared. The count and offset values are also set to 0. In this case, out-of-bounds access is also caused. Now the restriction on the queue number is added. [1] https://groups.google.com/g/syzkaller-bugs/c/_lYOKgkBVMg Fixes: 2f530df7 ("net/sched: taprio: give higher priority to higher TCs in software dequeue mode") Reported-by: syzbot+04afcb3d2c840447559a@syzkaller.appspotmail.com Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Tested-by:
Pedro Tammela <pctammela@mojatatu.com> Signed-off-by:
-
Ratheesh Kannoth authored
CN10KB silicon introduced a new exact match feature, which is used for DMAC filtering. The state of installed DMAC filters in this exact match table is getting corrupted when promiscuous mode is toggled. Fix this by not touching Exact match related config when promiscuous mode is toggled. Fixes: 2dba9459 ("octeontx2-af: Wrapper functions for MAC addr add/del/update/reset") Signed-off-by:
Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by:
-
Yoshihiro Shimoda authored
The timestamp descriptors were intended to act cyclically. Descriptors from index 0 through gq->ring_size - 1 contain actual information, and the last index (gq->ring_size) should have LINKFIX to indicate the first index 0 descriptor. However, the LINKFIX value is missing, causing the timestamp feature to stop after all descriptors are used. To resolve this issue, set the LINKFIX to the timestamp descritors. Reported-by:
Phong Hoang <phong.hoang.wz@renesas.com> Fixes: 33f5d733 ("net: renesas: rswitch: Improve TX timestamp accuracy") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
-
Max Tottenham authored
Instead of relying on skb->transport_header being set correctly, opt instead to parse the L3 header length out of the L3 headers for both IPv4/IPv6 when the Extended Layer Op for tcp/udp is used. This fixes a bug if GRO is disabled, when GRO is disabled skb->transport_header is set by __netif_receive_skb_core() to point to the L3 header, it's later fixed by the upper protocol layers, but act_pedit will receive the SKB before the fixups are completed. The existing behavior causes the following to edit the L3 header if GRO is disabled instead of the UDP header: tc filter add dev eth0 ingress protocol ip flower ip_proto udp \ dst_ip 192.168.1.3 action pedit ex munge udp set dport 18053 Also re-introduce a rate-limited warning if we were unable to extract the header offset when using the 'ex' interface. Fixes: 71d0ed70 ("net/act_pedit: Support using offset relative to the conventional network headers") Signed-off-by:Max Tottenham <mtottenh@akamai.com> Reviewed-by:
Josh Hunt <johunt@akamai.com> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202305261541.N165u9TZ-lkp@intel.com/Reviewed-by:
-
Wes Huang authored
Add support for Compal RXM-G1 which is based on Qualcomm SDX55 chip. This patch adds support for two compositions: 0x9091: DIAG + MODEM + QMI_RMNET + ADB 0x90db: DIAG + DUN + RMNET + DPL + QDSS(Trace) + ADB T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=05c6 ProdID=9091 Rev= 4.14 S: Manufacturer=QCOM S: Product=SDXPRAIRIE-MTP _SN:719AB680 S: SerialNumber=719ab680 C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=05c6 ProdID=90db Rev= 4.14 S: Manufacturer=QCOM S: Product=SDXPRAIRIE-MTP _SN:719AB680 S: SerialNumber=719ab680 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=84(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by:
Wes Huang <wes.huang@moxa.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20230608030141.3546-1-wes.huang@moxa.comSigned-off-by:
-
Yuezhen Luan authored
82580/i354/i350 features circle-counter-like timestamp registers that are different with newer i210. The EXTTS capture value in AUXTSMPx should be converted from raw circle counter value to timestamp value in resolution of 1 nanosec by the driver. This issue can be reproduced on i350 nics, connecting an 1PPS signal to a SDP pin, and run 'ts2phc' command to read external 1PPS timestamp value. On i210 this works fine, but on i350 the extts is not correctly converted. The i350/i354/82580's SYSTIM and other timestamp registers are 40bit counters, presenting time range of 2^40 ns, that means these registers overflows every about 1099s. This causes all these regs can't be used directly in contrast to the newer i210/i211s. The igb driver needs to convert these raw register values to valid time stamp format by using kernel timecounter apis for i350s families. Here the igb_extts() just forgot to do the convert. Fixes: 38970eac ("igb: support EXTTS on 82580/i354/i350") Signed-off-by:
Yuezhen Luan <eggcar.luan@gmail.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
Guillaume Nault authored
Ping sockets can't send packets when they're bound to a VRF master device and the output interface is set to a slave device. For example, when net.ipv4.ping_group_range is properly set, so that ping6 can use ping sockets, the following kind of commands fails: $ ip vrf exec red ping6 fe80::854:e7ff:fe88:4bf1%eth1 What happens is that sk->sk_bound_dev_if is set to the VRF master device, but 'oif' is set to the real output device. Since both are set but different, ping_v6_sendmsg() sees their value as inconsistent and fails. Fix this by allowing 'oif' to be a slave device of ->sk_bound_dev_if. This fixes the following kselftest failure: $ ./fcnal-test.sh -t ipv6_ping [...] TEST: ping out, vrf device+address bind - ns-B IPv6 LLA [FAIL] Reported-by:
Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Closes: https://lore.kernel.org/netdev/b6191f90-ffca-dbca-7d06-88a9788def9c@alu.unizg.hr/Tested-by:
Guillaume Nault <gnault@redhat.com> Reviewed-by:
-
