- 12 Dec, 2015 21 commits
-
-
Maor Gottlieb authored
Introducing the following objects: mlx5_flow_root_namespace: represent the root of specific flow table type tree(e.g NIC receive, FDB, etc..) mlx5_flow_group: define the mask of the flow specification. fs_fte(flow steering flow table entry): defines the value of the flow specification. The following describes the relationships between the tree objects: root_namespace --> priorities -->namespaces --> priorities -->flow-tables --> flow-groups --> flow-entries --> destinations When we create new object(flow table/flow group/flow table entry), we call to the FW command and then we add the related sw object to the tree. When we destroy object, e.g. call to mlx5_destroy_flow_table, we use the tree node destructor for destroying the FW object and remove the node from the tree. Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maor Gottlieb authored
Introduce the flow steering mlx5_flow_namespace (Namespace) and fs_prio (Flow Steering Priority) tree nodes. Namespaces are used in order to isolate different usages or types of steering (for example, downstream patches will add a different namespaces for the NIC driver and for E-Switch FDB usages). Flow Steering Priorities are objects that describes priorities ranges between different flow objects under the same namespace. Example, entries in priority i are matched before entries in priority i+1. This patch adds the following algorithms: 1) Calculate level: Each flow table has level(the priority between the flow tables). When we initialize the flow steering tree, we assign range of levels to each priority, therefore the level for new flow table is the location within the priority related to the range of the priority. 2) Match between match criteria. This function is used for searching flow group when new flow rule is added. 3) Match between match values. This function is used for searching flow table entry when new flow rule is added. 4) Add essential macros for traversing on a node's children. E.g. traversing on all the flow table of some priority Signed-off-by:
-
Maor Gottlieb authored
Introducing the base data structure and its operations that are going to represent ConnectX-4 Flow Steering, this data structure is basically a tree and all Flow steering objects such as (Flow Table/Flow Group/FTE/etc ..) are represented as fs_node(s). fs_node is the base object which describes a basic tree node, with the following extra info: type: describes the runtime type of the node (Object). lock: lock this node sub-tree. ref_count: number of children + current references. remove_func: a generic destructor. fs_node types will be used and explained once the usage is added in the following patches. Signed-off-by: -
Maor Gottlieb authored
Introduce new Flow Steering (FS) firmware commands, in-order to support the new flow steering infrastructure. Signed-off-by:
-
Saeed Mahameed authored
Under SRIOV there might be a case where VFs are loaded without pre-assigned MAC address. In this case, the VF will randomize its own MAC. This will address the case of administrator not assigning MAC to the VF through the PF OS APIs and keep udev happy. Signed-off-by:
-
Saeed Mahameed authored
E-Switch capabilities should be queried only if E-Switch flow table is supported and not only when vport group manager. Fixes: d6666753 ("net/mlx5: E-Switch, Introduce HCA cap and E-Switch vport context") Signed-off-by:
-
David S. Miller authored
Sunil Goutham says: ==================== net: thunderx: Support for pass-2 hw features This patch set adds support for new features added in pass-2 revision of hardware like TSO and count based interrupt coalescing. Changes from v1: - Addressed comments received regarding boolean bit field changes by excluding them from this patch. Will submit a seperate patch along with cleanup of unsed field. - Got rid of new macro 'VNIC_NAPI_WEIGHT' introduced in count threshold interrupt patch. ==================== Reviewed-by:
Pavel Fedin <p.fedin@samsung.com> Signed-off-by:
-
Sunil Goutham authored
This feature is introduced in pass-2 chip and with this CQ interrupt coalescing will work based on both timer and count. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
-
Sunil Goutham authored
This adds support for offloading TCP segmentation to HW in pass-2 revision of hardware. Both driver level SW TSO for pass1.x chips and HW TSO for pass-2 chip will co-exist. Modified SQ descriptor structures to reflect pass-2 hw implementation. Signed-off-by:
-
Andrew Lunn authored
Phy properties are expected to be found in the PHY OF node. However this Micrel driver also allows them to be placed into the MAC OF node. This is deprecated. Document it as such, and remove the example using the deprecated method to prevent people copying it into new device tree files. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David S. Miller authored
Gregory CLEMENT says: ==================== mvneta: Introduce RSS support and XPS configuration this series is the first step add RSS support on mvneta. It will allow associating an ethernet interface to a given CPU through RSS by using "ethtool -X ethX weight". Indeed, currently I only enable one entry in the RSS lookup table. Even if it is not really RSS, it allows to get back the irq affinity feature we lost by using the percpu interrupt. The main change compared to the second version is the setup for the XPS instead of using specific hack inside the driver in the forth patch. Th first patch make the default queue associate to each port and no more a global variable. The second patch really associates the RX queues with the CPUs instead of masking the percpu interrupts for doing it. All the RX queues are enabled and are statically associated with the CPUs by using a modulo of the number of present CPUs. But at this stage only one RX queue will receive the stream. The third patch introduces a first level of RSS support through the ethtool functions. As explained in the introduction there is only one entry in the RSS lookup table which permits at the end to associate an mvneta port to a CPU through the RX queues because the mapping is static. ==================== Signed-off-by: -
Gregory CLEMENT authored
With this patch each CPU is associated with its own set of TX queues. It also setup the XPS with an initial configuration which set the affinity matching the hardware configuration. Suggested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Gregory CLEMENT authored
This patch adds the support for the RSS related ethtool function. Currently it only uses one entry in the indirection table which allows associating an mvneta interface to a given CPU. Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Signed-off-by:
-
Gregory CLEMENT authored
We enable the percpu interrupt for all the CPU and we just associate a CPU to a few queue at the neta level. The mapping between the CPUs and the queues is static. The queues are associated to the CPU module the number of CPUs. However currently we only use on RX queue for a given Ethernet port. Signed-off-by:
-
Gregory CLEMENT authored
Instead of using the same default queue for all the port. Move it in the port struct. It will allow have a different default queue for each port. Signed-off-by:
-
Roopa Prabhu authored
This gets rid of the following compile warn: net/mpls/mpls_iptunnel.c:40:5: warning: no previous prototype for mpls_output [-Wmissing-prototypes] Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by:
Robert Shearman <rshearma@brocade.com> Signed-off-by:
-
Hariprasad Shenai authored
Add a warn message when clip table overflows. If clip table isn't allocated, return from cxgb4_clip_release() to avoid panic. Disable offload if clip isn't enabled in the hardware. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Dan Carpenter authored
We already know "err" is zero so there is no need to check. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Dan Carpenter authored
The "err = " assignment is missing here. Fixes: 0d65fc13 ('mlxsw: spectrum: Implement LAG port join/leave') Signed-off-by:
-
Arnd Bergmann authored
The handling of epib and psdata remains a bit unclear in the driver, as we access the same fields both as CPU-endian and through DMA from the device. Sparse warns about this: ti/netcp_core.c:1147:21: warning: incorrect type in assignment (different base types) ti/netcp_core.c:1147:21: expected unsigned int [usertype] *[assigned] epib ti/netcp_core.c:1147:21: got restricted __le32 *<noident> This uses __le32 types in a few places and uses __force where the code looks fishy. The previous patch should really have produced the correct behavior, but this second patch is needed to shut up the warnings about it. Ideally it would be slightly rewritten to not need those casts, but I don't dare do that without access to the hardware for proper testing. Signed-off-by:
-
Arnd Bergmann authored
The netcp driver produces tons of warnings when CONFIG_LPAE is enabled on ARM: drivers/net/ethernet/ti/netcp_core.c: In function 'netcp_tx_map_skb': drivers/net/ethernet/ti/netcp_core.c:1084:13: warning: passing argument 1 of 'set_words' from incompatible pointer type [-Wincompatible-pointer-types] This is the result of trying to pass a pointer to a dma_addr_t to a function that expects a u32 pointer to copy that into a DMA descriptor. Looking at that code in more detail to fix the warnings, I see multiple related problems: * The conversion functions are not endian-safe, as the DMA descriptors are almost certainly fixed-endian, but the CPU is not. * On 64-bit machines, passing a pointer through a u32 variable is a bug, accessing an indirect pointer as a u32 pointer even more so. * The handling of epib and psdata mixes native-endian and device-endian data. In this patch, I try to sort out the types for most accesses here, adding le32_to_cpu/cpu_to_le32 where appropriate, and passing pointers through two 32-bit words in the descriptor padding, to make it plausible that the driver does the right thing if compiled for big-endian or 64-bit systems. Signed-off-by:
-
- 09 Dec, 2015 19 commits
-
-
Tejun Heo authored
sock_cgroup_data is a struct containing an anonymous union. sock_cgroup_set_prioidx() and sock_cgroup_set_classid() were initializing a field inside the anonymous union as follows. struct sock_ccgroup_data skcd_buf = { .val = VAL }; While this is fine on more recent compilers, gcc-4.4.7 triggers the following errors. include/linux/cgroup-defs.h: In function ‘sock_cgroup_set_prioidx’: include/linux/cgroup-defs.h:619: error: unknown field ‘val’ specified in initializer include/linux/cgroup-defs.h:619: warning: missing braces around initializer include/linux/cgroup-defs.h:619: warning: (near initialization for ‘skcd_buf.<anonymous>’) This is because .val belongs to the anonymous union nested inside the struct but the initializer is missing the nesting. Fix it by adding an extra pair of braces. Signed-off-by:Tejun Heo <tj@kernel.org> Reported-by:
Alaa Hleihel <alaa@dev.mellanox.co.il> Fixes: bd1060a1 ("sock, cgroup: add sock->sk_cgroup") Signed-off-by:
-
Julia Lawall authored
The cmac_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Eric Dumazet authored
These fields are updated but never read. Remove the overhead. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
Under heavy TX load, bnx2x_poll() can loop forever and trigger soft lockup bugs. A napi poll handler must yield after one TX completion round, risk of livelock is too high otherwise. Bug is very easy to trigger using a debug build, and udp flood, because of added cpu cycles in TX completion, and we do not receive enough packets to break the loop. Reported-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Herbert Xu authored
The patch 9497df88 ("rhashtable: Fix reader/rehash race") added a pair of barriers. In fact the wmb is superfluous because every subsequent write to the old or new hash table uses rcu_assign_pointer, which itself carriers a full barrier prior to the assignment. Therefore we may remove the explicit wmb. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== Update Kconfig and some fixes for cxgb4 This series update Kconfig to add description for Chelsio's next generation T6 family of adapters, also fixes ethtool stats alignment and prevents simultaneous execution of service_ofldq thread, deals with queue wrap around and adds some fl counters for debugging purpose and device ID for new T5 adapters. This patch series has been created against net-next tree and includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. Thanks V2: Declare 'service_ofldq_running' as bool in Patch 4/7 ("cxgb4: prevent simultaneous execution of service_ofldq()") based on review comment by David Miller ==================== Signed-off-by: -
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
Add Free List DMA Mapping Errors to SGE Queue info for Free Lists. Add Free List "Low" counter to count the number of times we see the number of pointers that we _think_ the hardware sees in the Free List below the Egress Threshold. Signed-off-by:
-
Hariprasad Shenai authored
The WR headers may not fit within one descriptor. So we need to deal with wrap-around here. Based on original patch by Pranjal Joshi <pjoshi@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Change mutual exclusion mechanism to prevent multiple threads of execution from running in service_ofldq() at the same time. The old mechanism used an implicit guard on the down-call path and none on the restart path and wasn't working. This checking makes the mechanism explicit and is much easier to understand as a result. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Use helper macro ACCESS_ONCE() to load from the SGE status page to prevent the compiler loading multiple times. Based on original work by Mike Werner <werner@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
yankejian authored
here is the patch raising the performance of XGE by: 1)changes the way page management method for enet momery, and 2)reduces the count of rmb, and 3)adds Memory prefetching Signed-off-by:
Kejian Yan <yankejian@huawei.com> Signed-off-by:
-
Tejun Heo authored
In cgroup v1, dealing with cgroup membership was difficult because the number of membership associations was unbound. As a result, cgroup v1 grew several controllers whose primary purpose is either tagging membership or pull in configuration knobs from other subsystems so that cgroup membership test can be avoided. net_cls and net_prio controllers are examples of the latter. They allow configuring network-specific attributes from cgroup side so that network subsystem can avoid testing cgroup membership; unfortunately, these are not only cumbersome but also problematic. Both net_cls and net_prio aren't properly hierarchical. Both inherit configuration from the parent on creation but there's no interaction afterwards. An ancestor doesn't restrict the behavior in its subtree in anyway and configuration changes aren't propagated downwards. Especially when combined with cgroup delegation, this is problematic because delegatees can mess up whatever network configuration implemented at the system level. net_prio would allow the delegatees to set whatever priority value regardless of CAP_NET_ADMIN and net_cls the same for classid. While it is possible to solve these issues from controller side by implementing hierarchical allowable ranges in both controllers, it would involve quite a bit of complexity in the controllers and further obfuscate network configuration as it becomes even more difficult to tell what's actually being configured looking from the network side. While not much can be done for v1 at this point, as membership handling is sane on cgroup v2, it'd be better to make cgroup matching behave like other network matches and classifiers than introducing further complications. In preparation, this patch updates sock->sk_cgrp_data handling so that it points to the v2 cgroup that sock was created in until either net_prio or net_cls is used. Once either of the two is used, sock->sk_cgrp_data reverts to its previous role of carrying prioidx and classid. This is to avoid adding yet another cgroup related field to struct sock. As the mode switching can happen at most once per boot, the switching mechanism is aimed at lowering hot path overhead. It may leak a finite, likely small, number of cgroup refs and report spurious prioidx or classid on switching; however, dynamic updates of prioidx and classid have always been racy and lossy - socks between creation and fd installation are never updated, config changes don't update existing sockets at all, and prioidx may index with dead and recycled cgroup IDs. Non-critical inaccuracies from small race windows won't make any noticeable difference. This patch doesn't make use of the pointer yet. The following patch will implement netfilter match for cgroup2 membership. v2: Use sock_cgroup_data to avoid inflating struct sock w/ another cgroup specific field. v3: Add comments explaining why sock_data_prioidx() and sock_data_classid() use different fallback values. Signed-off-by: -
Tejun Heo authored
Introduce sock->sk_cgrp_data which is a struct sock_cgroup_data. ->sk_cgroup_prioidx and ->sk_classid are moved into it. The struct and its accessors are defined in cgroup-defs.h. This is to prepare for overloading the fields with a cgroup pointer. This patch mostly performs equivalent conversions but the followings are noteworthy. * Equality test before updating classid is removed from sock_update_classid(). This shouldn't make any noticeable difference and a similar test will be implemented on the helper side later. * sock_update_netprioidx() now takes struct sock_cgroup_data and can be moved to netprio_cgroup.h without causing include dependency loop. Moved. * The dummy version of sock_update_netprioidx() converted to a static inline function while at it. Signed-off-by:
-
Tejun Heo authored
netprio builds per-netdev contiguous priomap array which is indexed by css->id. The array is allocated using kzalloc() effectively limiting the maximum ID supported to some thousand range. This patch caps the maximum supported css->id to USHRT_MAX which should be way above what is actually useable. This allows reducing sock->sk_cgrp_prioidx to u16 from u32. The freed up part will be used to overload the cgroup related fields. sock->sk_cgrp_prioidx's position is swapped with sk_mark so that the two cgroup related fields are adjacent. Signed-off-by:
Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Daniel Borkmann <daniel@iogearbox.net> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupDavid S. Miller authored
Preparatory changes for some new socket cgroup infrastructure and netfilter targets. Signed-off-by: -
Stefan Hajnoczi authored
This reverts commit 0d76d6e8 and merge commit c402293b, reversing changes made to c89359a4. The virtio-vsock device specification is not finalized yet. Michael Tsirkin voiced concerned about merging this code when the hardware interface (and possibly the userspace interface) could still change. Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
