After the prep work in the previous patches,
this patch removes all the dup code from bpf_setsockopt(SOL_TCP)
and reuses the do_tcp_setsockopt().

The existing optname white-list is refactored into a new
function sol_tcp_setsockopt().  The sol_tcp_setsockopt()
also calls the bpf_sol_tcp_setsockopt() to handle
the TCP_BPF_XXX specific optnames.

bpf_setsockopt(TCP_SAVE_SYN) now also allows a value 2 to
save the eth header also and it comes for free from
do_tcp_setsockopt().
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061819.4180146-1-kafai@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The patch moves all bpf specific tcp optnames (TCP_BPF_XXX)
to a new function bpf_sol_tcp_setsockopt().  This will make
the next patch easier to follow.
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061812.4179645-1-kafai@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

After the prep work in the previous patches,
this patch removes most of the dup code from bpf_setsockopt(SOL_SOCKET)
and reuses them from sk_setsockopt().

The sock ptr test is added to the SO_RCVLOWAT because
the sk->sk_socket could be NULL in some of the bpf hooks.

The existing optname white-list is refactored into a new
function sol_socket_setsockopt().
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061804.4178920-1-kafai@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This patch moves the "#ifdef CONFIG_XXX" check into the "if/else"
statement itself.  The change is done for the bpf_setsockopt()
function only.  It will make the latter patches easier to follow
without the surrounding ifdef macro.
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061758.4178374-1-kafai@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The bpf-iter-prog for tcp and unix sk can do bpf_setsockopt()
which needs has_current_bpf_ctx() to decide if it is called by a
bpf prog.  This patch initializes the bpf_run_ctx in
bpf_iter_run_prog() for the has_current_bpf_ctx() to use.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061751.4177657-1-kafai@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Similar to the earlier patch that avoids sk_setsockopt() from
taking sk lock and doing capable test when called by bpf.  This patch
changes do_ipv6_setsockopt() to use the sockopt_{lock,release}_sock()
and sockopt_[ns_]capable().
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061744.4176893-1-kafai@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Similar to the earlier patch that avoids sk_setsockopt() from
taking sk lock and doing capable test when called by bpf.  This patch
changes do_ip_setsockopt() to use the sockopt_{lock,release}_sock()
and sockopt_[ns_]capable().
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061737.4176402-1-kafai@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Similar to the earlier patch that avoids sk_setsockopt() from
taking sk lock and doing capable test when called by bpf.  This patch
changes do_tcp_setsockopt() to use the sockopt_{lock,release}_sock()
and sockopt_[ns_]capable().
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061730.4176021-1-kafai@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

When bpf program calling bpf_setsockopt(SOL_SOCKET),
it could be run in softirq and doesn't make sense to do the capable
check.  There was a similar situation in bpf_setsockopt(TCP_CONGESTION).
In commit 8d650cde ("tcp: fix tcp_set_congestion_control() use from bpf hook"),
tcp_set_congestion_control(..., cap_net_admin) was added to skip
the cap check for bpf prog.

This patch adds sockopt_ns_capable() and sockopt_capable() for
the sk_setsockopt() to use.  They will consider the
has_current_bpf_ctx() before doing the ns_capable() and capable() test.
They are in EXPORT_SYMBOL for the ipv6 module to use in a latter patch.
Suggested-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061723.4175820-1-kafai@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Most of the code in bpf_setsockopt(SOL_SOCKET) are duplicated from
the sk_setsockopt().  The number of supported optnames are
increasing ever and so as the duplicated code.

One issue in reusing sk_setsockopt() is that the bpf prog
has already acquired the sk lock.  This patch adds a
has_current_bpf_ctx() to tell if the sk_setsockopt() is called from
a bpf prog.  The bpf prog calling bpf_setsockopt() is either running
in_task() or in_serving_softirq().  Both cases have the current->bpf_ctx
initialized.  Thus, the has_current_bpf_ctx() only needs to
test !!current->bpf_ctx.

This patch also adds sockopt_{lock,release}_sock() helpers
for sk_setsockopt() to use.  These helpers will test
has_current_bpf_ctx() before acquiring/releasing the lock.  They are
in EXPORT_SYMBOL for the ipv6 module to use in a latter patch.

Note on the change in sock_setbindtodevice().  sockopt_lock_sock()
is done in sock_setbindtodevice() instead of doing the lock_sock
in sock_bindtoindex(..., lock_sk = true).
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061717.4175589-1-kafai@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

A latter patch refactors bpf_setsockopt(SOL_SOCKET) with the
sock_setsockopt() to avoid code duplication and code
drift between the two duplicates.

The current sock_setsockopt() takes sock ptr as the argument.
The very first thing of this function is to get back the sk ptr
by 'sk = sock->sk'.

bpf_setsockopt() could be called when the sk does not have
the sock ptr created.  Meaning sk->sk_socket is NULL.  For example,
when a passive tcp connection has just been established but has yet
been accept()-ed.  Thus, it cannot use the sock_setsockopt(sk->sk_socket)
or else it will pass a NULL ptr.

This patch moves all sock_setsockopt implementation to the newly
added sk_setsockopt().  The new sk_setsockopt() takes a sk ptr
and immediately gets the sock ptr by 'sock = sk->sk_socket'

The existing sock_setsockopt(sock) is changed to call
sk_setsockopt(sock->sk).  All existing callers have both sock->sk
and sk->sk_socket pointer.

The latter patch will make bpf_setsockopt(SOL_SOCKET) call
sk_setsockopt(sk) directly.  The bpf_setsockopt(SOL_SOCKET) does
not use the optnames that require sk->sk_socket, so it will
be safe.
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220817061711.4175048-1-kafai@fb.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Add the ethtool_op_get_ts_info() callback to ethtool ops, so that we can
at least use software timestamping.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://lore.kernel.org/r/20220817095725.97444-1-maxime.chevallier@bootlin.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The 'has_crossts' flag was not used anywhere in the stmmac driver,
removing it from both header file and dwmac-intel driver.
Signed-off-by: Wong Vee Khee <veekhee@apple.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20220817064324.10025-1-veekhee@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Andrii Nakryiko says:

====================
bpf-next 2022-08-17

We've added 45 non-merge commits during the last 14 day(s) which contain
a total of 61 files changed, 986 insertions(+), 372 deletions(-).

The main changes are:

1) New bpf_ktime_get_tai_ns() BPF helper to access CLOCK_TAI, from Kurt
   Kanzenbach and Jesper Dangaard Brouer.

2) Few clean ups and improvements for libbpf 1.0, from Andrii Nakryiko.

3) Expose crash_kexec() as kfunc for BPF programs, from Artem Savkov.

4) Add ability to define sleepable-only kfuncs, from Benjamin Tissoires.

5) Teach libbpf's bpf_prog_load() and bpf_map_create() to gracefully handle
   unsupported names on old kernels, from Hangbin Liu.

6) Allow opting out from auto-attaching BPF programs by libbpf's BPF skeleton,
   from Hao Luo.

7) Relax libbpf's requirement for shared libs to be marked executable, from
   Henqgi Chen.

8) Improve bpf_iter internals handling of error returns, from Hao Luo.

9) Few accommodations in libbpf to support GCC-BPF quirks, from James Hilliard.

10) Fix BPF verifier logic around tracking dynptr ref_obj_id, from Joanne Koong.

11) bpftool improvements to handle full BPF program names better, from Manu
    Bretelle.

12) bpftool fixes around libcap use, from Quentin Monnet.

13) BPF map internals clean ups and improvements around memory allocations,
    from Yafang Shao.

14) Allow to use cgroup_get_from_file() on cgroupv1, allowing BPF cgroup
    iterator to work on cgroupv1, from Yosry Ahmed.

15) BPF verifier internal clean ups, from Dave Marchevsky and Joanne Koong.

16) Various fixes and clean ups for selftests/bpf and vmtest.sh, from Daniel
    Xu, Artem Savkov, Joanne Koong, Andrii Nakryiko, Shibin Koikkara Reeny.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
  selftests/bpf: Few fixes for selftests/bpf built in release mode
  libbpf: Clean up deprecated and legacy aliases
  libbpf: Streamline bpf_attr and perf_event_attr initialization
  libbpf: Fix potential NULL dereference when parsing ELF
  selftests/bpf: Tests libbpf autoattach APIs
  libbpf: Allows disabling auto attach
  selftests/bpf: Fix attach point for non-x86 arches in test_progs/lsm
  libbpf: Making bpf_prog_load() ignore name if kernel doesn't support
  selftests/bpf: Update CI kconfig
  selftests/bpf: Add connmark read test
  selftests/bpf: Add existing connection bpf_*_ct_lookup() test
  bpftool: Clear errno after libcap's checks
  bpf: Clear up confusion in bpf_skb_adjust_room()'s documentation
  bpftool: Fix a typo in a comment
  libbpf: Add names for auxiliary maps
  bpf: Use bpf_map_area_alloc consistently on bpf map creation
  bpf: Make __GFP_NOWARN consistent in bpf map creation
  bpf: Use bpf_map_area_free instread of kvfree
  bpf: Remove unneeded memset in queue_stack_map creation
  libbpf: preserve errno across pr_warn/pr_info/pr_debug
  ...
====================

Link: https://lore.kernel.org/r/20220817215656.1180215-1-andrii@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix few issues found when building and running test_progs in
release mode.

First, potentially uninitialized idx variable in xskxceiver,
force-initialize to zero to satisfy compiler.

Few instances of defining uprobe trigger functions break in release mode
unless marked as noinline, due to being static. Add noinline to make
sure everything works.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-5-andrii@kernel.org

Remove three missed deprecated APIs that were aliased to new APIs:
bpf_object__unload, bpf_prog_attach_xattr and btf__load.

Also move legacy API libbpf_find_kernel_btf (aliased to
btf__load_vmlinux_btf) into libbpf_legacy.h.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-4-andrii@kernel.org

Make sure that entire libbpf code base is initializing bpf_attr and
perf_event_attr with memset(0). Also for bpf_attr make sure we
clear and pass to kernel only relevant parts of bpf_attr. bpf_attr is
a huge union of independent sub-command attributes, so there is no need
to clear and pass entire union bpf_attr, which over time grows quite
a lot and for most commands this growth is completely irrelevant.

Few cases where we were relying on compiler initialization of BPF UAPI
structs (like bpf_prog_info, bpf_map_info, etc) with `= {};` were
switched to memset(0) pattern for future-proofing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-3-andrii@kernel.org

Fix if condition filtering empty ELF sections to prevent NULL
dereference.

Fixes: 47ea7417 ("libbpf: Skip empty sections in bpf_object__init_global_data_maps")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220816001929.369487-2-andrii@kernel.org

Florian Fainelli says:

====================
net: dsa: bcm_sf2: Utilize PHYLINK for all ports

This patch series has the bcm_sf2 driver utilize PHYLINK to configure
the CPU port link parameters to unify the configuration and pave the way
for DSA to utilize PHYLINK for all ports in the future.

Tested on BCM7445 and BCM7278
====================

Link: https://lore.kernel.org/r/20220815175009.2681932-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove the artificial limitations imposed upon
bcm_sf2_sw_mac_link_{up,down} and allow us to override the link
parameters for IMP port(s) as well as regular ports by accounting for
the special differences that exist there.

Remove the code that did override the link parameters in
bcm_sf2_imp_setup().
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Depending upon the generation of switches, we have different offsets for
configuring a given port's status override where link parameters are
applied. Introduce a helper function that we re-use throughout the code
in order to let phylink callbacks configure the IMP/CPU port(s) in
subsequent changes.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This makes the code look cleaner and easier to read.
Signed-off-by: Beniamin Sandu <beniaminsandu@gmail.com>
Link: https://lore.kernel.org/r/20220813204658.848372-1-beniaminsandu@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Adds test for libbpf APIs that toggle bpf program auto-attaching.
Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220816234012.910255-2-haoluo@google.com

Adds libbpf APIs for disabling auto-attach for individual functions.
This is motivated by the use case of cgroup iter [1]. Some iter
types require their parameters to be non-zero, therefore applying
auto-attach on them will fail. With these two new APIs, users who
want to use auto-attach and these types of iters can disable
auto-attach on the program and perform manual attach.

[1] https://lore.kernel.org/bpf/CAEf4BzZ+a2uDo_t6kGBziqdz--m2gh2_EUwkGLDtMd65uwxUjA@mail.gmail.com/Signed-off-by: Hao Luo <haoluo@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220816234012.910255-1-haoluo@google.com

M Chetan Kumar says:

====================
net: wwan: t7xx: fw flashing & coredump support

This patch series brings-in the support for FM350 wwan device firmware
flashing & coredump collection using devlink interface.

Below is the high level description of individual patches.
Refer to individual patch commit message for details.

PATCH1:  Enables AP CLDMA communication for firmware flashing &
coredump collection.

PATCH2: Enables the infrastructure & queue configuration required
for early ports enumeration.

PATCH3: Implements device reset and rescan logic required to enter
or exit fastboot mode.

PATCH4: Implements devlink interface & uses the fastboot protocol for
fw flashing and coredump collection.

PATCH5: t7xx devlink commands documentation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Document the t7xx devlink commands usage for fw flashing &
coredump collection.

Refer to t7xx.rst file for details.
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch brings-in support for t7xx wwan device firmware flashing &
coredump collection using devlink.

Driver Registers with Devlink framework.
Implements devlink ops flash_update callback that programs modem firmware.
Creates region & snapshot required for device coredump log collection.
On early detection of wwan device in fastboot mode driver sets up CLDMA0 HW
tx/rx queues for raw data transfer then registers with devlink framework.
Upon receiving firmware image & partition details driver sends fastboot
commands for flashing the firmware.

In this flow the fastboot command & response gets exchanged between driver
and device. Once firmware flashing is success completion status is reported
to user space application.

Below is the devlink command usage for firmware flashing

$devlink dev flash pci/$BDF file ABC.img component ABC

Note: ABC.img is the firmware to be programmed to "ABC" partition.

In case of coredump collection when wwan device encounters an exception
it reboots & stays in fastboot mode for coredump collection by host driver.
On detecting exception state driver collects the core dump, creates the
devlink region & reports an event to user space application for dump
collection. The user space application invokes devlink region read command
for dump collection.

Below are the devlink commands used for coredump collection.

devlink region new pci/$BDF/mr_dump
devlink region read pci/$BDF/mr_dump snapshot $ID address $ADD length $LEN
devlink region del pci/$BDF/mr_dump snapshot $ID
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Signed-off-by: Mishra Soumya Prakash <soumya.prakash.mishra@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PCI rescan module implements "rescan work queue". In firmware flashing
or coredump collection procedure WWAN device is programmed to boot in
fastboot mode and a work item is scheduled for removal & detection.
The WWAN device is reset using APCI call as part driver removal flow.
Work queue rescans pci bus at fixed interval for device detection,
later when device is detect work queue exits.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Co-developed-by: Madhusmita Sahu <madhusmita.sahu@intel.com>
Signed-off-by: Madhusmita Sahu <madhusmita.sahu@intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To support cases such as FW update or Core dump, the t7xx device
is capable of signaling the host that a special port needs
to be created before the handshake phase.

This patch adds the infrastructure required to create the
early ports which also requires a different configuration of
CLDMA queues.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Co-developed-by: Madhusmita Sahu <madhusmita.sahu@intel.com>
Signed-off-by: Madhusmita Sahu <madhusmita.sahu@intel.com>
Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com>
Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The t7xx device contains two Cross Layer DMA (CLDMA) interfaces to
communicate with AP and Modem processors respectively. So far only
MD-CLDMA was being used, this patch enables AP-CLDMA.

Rename small Application Processor (sAP) to AP.
Signed-off-by: Haijun Liu <haijun.liu@mediatek.com>
Co-developed-by: Madhusmita Sahu <madhusmita.sahu@intel.com>
Signed-off-by: Madhusmita Sahu <madhusmita.sahu@intel.com>
Signed-off-by: Moises Veleta <moises.veleta@linux.intel.com>
Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Implement the suspend/resume procedure for the Broadcom AC131 and BCM5241 type
of PHYs (10/100 only) by entering the standard power down followed by the
proprietary standby mode in the auxiliary mode 4 shadow register. On resume,
the PHY software reset is enough to make it come out of standby mode so we can
utilize brcm_fet_config_init() as the resume hook.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

t-queue

Tony Nguyen says:

====================
ice: detect and report PTP timestamp issues

Jacob Keller says:

This series fixes a few small issues with the cached PTP Hardware Clock
timestamp used for timestamp extension. It also introduces extra checks to
help detect issues with this logic, such as if the cached timestamp is not
updated within the 2 second window.

This introduces a few statistics similar to the ones already available in
other Intel drivers, including tx_hwtstamp_skipped and tx_hwtstamp_timeouts.

It is intended to aid in debugging issues we're seeing with some setups
which might be related to incorrect cached timestamp values.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of the hardcoded TCP_TIMEOUT_INIT, this diff calls tcp_timeout_init
to initiate req->timeout like the non TFO SYN ACK case.

Tested using the following packetdrill script, on a host with a BPF
program that sets the initial connect timeout to 10ms.

`../../common/defaults.sh`

// Initialize connection
    0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
   +0 setsockopt(3, SOL_TCP, TCP_FASTOPEN, [1], 4) = 0
   +0 bind(3, ..., ...) = 0
   +0 listen(3, 1) = 0

   +0 < S 0:0(0) win 32792 <mss 1000,sackOK,FO TFO_COOKIE>
   +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
   +.01 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
   +.02 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
   +.04 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
   +.01 < . 1:1(0) ack 1 win 32792

   +0 accept(3, ..., ...) = 4
Signed-off-by: Jie Meng <jmeng@fb.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The input parameter p is unused in qdisc_create. Delete it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20220815061023.51318-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

in-tech smart charging is now chargebyte. So update the email address
accordingly.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220815080626.9688-2-stefan.wahren@i2se.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

in-tech smart charging is now chargebyte. So update the email address
accordingly.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220815080626.9688-1-stefan.wahren@i2se.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Return value of unregister_qdisc is unused, remove it.
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20220815030417.271894-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use SYS_PREFIX macro from bpf_misc.h instead of hard-coded '__x64_'
prefix for sys_setdomainname attach point in lsm test.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220816055231.717006-1-asavkov@redhat.com

If the PTP hardware clock is adjusted, the ice driver must update the
cached PHC timestamp. This is required in order to perform timestamp
extension on the shorter timestamps captured by the PHY.

Currently, we simply call ice_ptp_update_cached_phctime in the settime and
adjtime callbacks. This has a few issues:

1) if ICE_CFG_BUSY is set because another thread is updating the Rx rings,
   we will exit with an error. This is not checked, and the functions do
   not re-schedule the update. This could leave the cached timestamp
   incorrect until the next scheduled work item execution.

2) even if we did handle an update, any currently outstanding Tx timestamp
   would be extended using the wrong cached PHC time. This would produce
   incorrect results.

To fix these issues, introduce a new ice_ptp_reset_cached_phctime function.
This function calls the ice_ptp_update_cached_phctime, and discards
outstanding Tx timestamps.

If the ice_ptp_update_cached_phctime function fails because ICE_CFG_BUSY is
set, we log a warning and schedule the thread to execute soon. The update
function is modified so that it always updates the cached copy in the PF
regardless. This ensures we have the most up to date values possible and
minimizes the risk of a packet timestamp being extended with the wrong
value.

It would be nice if we could skip reporting Rx timestamps until the cached
values are up to date. However, we can't access the Rx rings while
ICE_CFG_BUSY is set because they are actively being updated by another
thread.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

A following change is going to want to make use of ice_ptp_flush_tx_tracker
earlier in the ice_ptp.c file. To make this work, move the Tx timestamp
tracking functions higher up in the file, and pull the
ice_ptp_update_cached_timestamp function below them. This should have no
functional change.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>