- 11 Nov, 2020 3 commits
-
-
Dave Airlie authored
This removes the code to move resources directly between SYSTEM and VRAM in favour of using the core ttm mulithop code. Signed-off-by:
Dave Airlie <airlied@redhat.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201109005432.861936-4-airlied@gmail.com
-
Dave Airlie authored
This removes the code to move resources directly between SYSTEM and VRAM in favour of using the core ttm mulithop code. Signed-off-by:
-
Dave Airlie authored
Currently drivers get called to move a buffer, but if they have to move it temporarily through another space (SYSTEM->VRAM via TT) then they can end up with a lot of ttm->driver->ttm call stacks, if the temprorary space moves requires eviction. Instead of letting the driver do all the placement/space for the temporary, allow it to report back (-EMULTIHOP) and a placement (hop) to the move code, which will then do the temporary move, and the correct placement move afterwards. This removes a lot of code from drivers, at the expense of adding some midlayering. I've some further ideas on how to turn it inside out, but I think this is a good solution to the call stack problems. v2: separate out the driver patches, add WARN for getting MULTHOP in paths we shouldn't (Daniel) v3: use memset (Christian) Reviewed-by:
-
- 10 Nov, 2020 21 commits
-
-
Koba Ko authored
This reverts commit ad44c032. Currently DRM driver assume the source device caps is higher than the MST device caps. With this commit, this statement would be broken. e.g. the source device only support DP1.2 and the mst device support DP1.4. Signed-off-by:
Koba Ko <koba.ko@canonical.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Jason Gunthorpe authored
commit f8f6ae5d ("mm: always have io_remap_pfn_range() set pgprot_decrypted()") moves the pgprot_decrypted() into io_remap_pfn_range(). Delete any, now confusing, open coded calls that directly precede io_remap_pfn_range(): - drm_io_prot() is only in drm_mmap_locked() to call io_remap_pfn_range() - fb_mmap() immediately calls vm_iomap_memory() which is a convenience wrapper for io_remap_pfn_range() Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
-
Geert Uytterhoeven authored
The Intel Keem Bay display controller is only present on Intel Keem Bay SoCs. Hence add a dependency on ARCH_KEEMBAY, to prevent asking the user about this driver when configuring a kernel without Intel Keem Bay platform support. Note that: 1. The dependency on ARM is dropped, as Keem Bay SoCs are only supported in arm64 kernel builds, 2. The dependencies on OF and COMMON_CLK can be dropped for compile-testing, as the driver builds fine regardless. Fixes: ed794057 ("drm/kmb: Build files for KeemBay Display driver") Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Geert Uytterhoeven authored
If CONFIG_DRM_MIPI_DSI=n: aarch64-linux-gnu-ld: drivers/gpu/drm/kmb/kmb_dsi.o: in function `kmb_dsi_host_unregister': kmb_dsi.c:(.text+0xa48): undefined reference to `mipi_dsi_host_unregister' aarch64-linux-gnu-ld: drivers/gpu/drm/kmb/kmb_dsi.o: in function `kmb_dsi_host_bridge_init': kmb_dsi.c:(.text+0xb14): undefined reference to `mipi_dsi_host_register' Fix this be selecting DRM_MIPI_DSI, like other drivers do. Fixes: ed794057 ("drm/kmb: Build files for KeemBay Display driver") Signed-off-by: -
Thomas Zimmermann authored
We need commit f8f6ae5d ("mm: always have io_remap_pfn_range() set pgprot_decrypted()") to be able to merge Jason's cleanup patch. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de>
-
Daniel Abrecht authored
This will make sure applications which use the IN_FORMATS blob to figure out which modifiers they can use will pick up the linear modifier which is needed by mxsfb. Such applications will not work otherwise if an incompatible implicit modifier ends up being selected. Before commit ae1ed009 ("drm: mxsfb: Stop using DRM simple display pipeline helper"), the DRM simple display pipeline helper took care of this. Signed-off-by:
Daniel Abrecht <public@danielabrecht.ch> Fixes: ae1ed009 ("drm: mxsfb: Stop using DRM simple display pipeline helper") Signed-off-by:
-
Deepak R Varma authored
idr_init() uses base 0 which is an invalid identifier. The new function idr_init_base allows IDR to set the ID lookup from base 1. This avoids all lookups that otherwise starts from 0 since 0 is always unused. References: commit 6ce711f2 ("idr: Make 1-based IDRs more efficient") Signed-off-by:
Deepak R Varma <mh12gx2825@gmail.com> Signed-off-by:
-
Daniel Vetter authored
We need commit f8f6ae5d ("mm: always have io_remap_pfn_range() set pgprot_decrypted()") to be able to merge Jason's cleanup patch. Signed-off-by:
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. However, users of its direct wrappers in omapdrm assume that PM usage counter will not change on error. Thus a pairing decrement is needed on the error handling path for these wrappers to keep the counter balanced. Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200822065743.13671-1-dinghao.liu@zju.edu.cn
-
Alexander A. Klimov authored
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by:Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by:
-
Wang Xiaojun authored
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Signed-off-by:
Wang Xiaojun <wangxiaojun11@huawei.com> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/omapdrm/dss/dsi.c: In function ‘_dsi_print_reset_status’: drivers/gpu/drm/omapdrm/dss/dsi.c:1131:6: warning: variable ‘l’ set but not used [-Wunused-but-set-variable] drivers/gpu/drm/omapdrm/dss/dsi.c: In function ‘dsi_update’: drivers/gpu/drm/omapdrm/dss/dsi.c:3943:10: warning: variable ‘dh’ set but not used [-Wunused-but-set-variable] drivers/gpu/drm/omapdrm/dss/dsi.c:3943:6: warning: variable ‘dw’ set but not used [-Wunused-but-set-variable] Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Lee Jones <lee.jones@linaro.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Lee Jones authored
The API has been updated, but the header was not. Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Function parameter or member 'crtc' not described in 'omap_irq_enable_vblank' drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Excess function parameter 'dev' description in 'omap_irq_enable_vblank' drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Excess function parameter 'pipe' description in 'omap_irq_enable_vblank' drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Function parameter or member 'crtc' not described in 'omap_irq_disable_vblank' drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Excess function parameter 'dev' description in 'omap_irq_disable_vblank' drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Excess function parameter 'pipe' description in 'omap_irq_disable_vblank' Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob.clark@linaro.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:313: warning: Function parameter or member 'dmm' not described in 'dmm_txn_init' drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:313: warning: Function parameter or member 'tcm' not described in 'dmm_txn_init' drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'txn' not described in 'dmm_txn_append' drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'area' not described in 'dmm_txn_append' drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'pages' not described in 'dmm_txn_append' drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'npages' not described in 'dmm_txn_append' drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'roll' not described in 'dmm_txn_append' drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:399: warning: Function parameter or member 'txn' not described in 'dmm_txn_commit' drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:399: warning: Function parameter or member 'wait' not described in 'dmm_txn_commit' Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <rob@ti.com> Cc: Andy Gross <andy.gross@ti.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/omapdrm/omap_gem.c:593: warning: Function parameter or member 'file' not described in 'omap_gem_dumb_create' drivers/gpu/drm/omapdrm/omap_gem.c:593: warning: Excess function parameter 'drm_file' description in 'omap_gem_dumb_create' drivers/gpu/drm/omapdrm/omap_gem.c:619: warning: Function parameter or member 'offset' not described in 'omap_gem_dumb_map_offset' Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Rob Clark <rob.clark@linaro.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by:
-
Maxime Ripard authored
Many drivers reference the crtc->pointer in order to get the current CRTC state in their atomic_begin or atomic_flush hooks, which would be the new CRTC state in the global atomic state since _swap_state happened when those hooks are run. Use the drm_atomic_get_new_crtc_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ crtc_atomic_func @ identifier helpers; identifier func; @@ ( static struct drm_crtc_helper_funcs helpers = { ..., .atomic_begin = func, ..., }; | static struct drm_crtc_helper_funcs helpers = { ..., .atomic_flush = func, ..., }; ) @@ identifier crtc_atomic_func.func; identifier crtc, state; symbol crtc_state; expression e; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { ... - struct tegra_dc_state *crtc_state = e; + struct tegra_dc_state *dc_state = e; <+... - crtc_state + dc_state ...+> } @@ identifier crtc_atomic_func.func; identifier crtc, state; symbol crtc_state; expression e; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { ... - struct mtk_crtc_state *crtc_state = e; + struct mtk_crtc_state *mtk_crtc_state = e; <+... - crtc_state + mtk_crtc_state ...+> } @ replaces_new_state @ identifier crtc_atomic_func.func; identifier crtc, state, crtc_state; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { ... - struct drm_crtc_state *crtc_state = crtc->state; + struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); ... } @@ identifier crtc_atomic_func.func; identifier crtc, state, crtc_state; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); ... - crtc->state + crtc_state ... } @ adds_new_state @ identifier crtc_atomic_func.func; identifier crtc, state; @@ func(struct drm_crtc *crtc, struct drm_atomic_state *state) { + struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc); ... - crtc->state + crtc_state ... } @ include depends on adds_new_state || replaces_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && (adds_new_state || replaces_new_state) @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Suggested-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Reviewed-by:
-
Thomas Zimmermann authored
Fixes a build failure with mediatek. This change was supposed to be part of commit 49a3f51d ("drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends"), but mediatek was forgotten. Signed-off-by:
-
Thomas Zimmermann authored
Fixes a build failure with msm. This change was supposed to be part of commit 49a3f51d ("drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends"), but msm was forgotten. Signed-off-by:
-
Geert Uytterhoeven authored
On arm32: drivers/gpu/drm/drm_fb_helper.c: In function ‘fb_read_screen_base’: include/linux/minmax.h:18:28: warning: comparison of distinct pointer types lacks a cast ... drivers/gpu/drm/drm_fb_helper.c:2041:22: note: in expansion of macro ‘min’ 2041 | size_t alloc_size = min(count, PAGE_SIZE); | ^~~ drivers/gpu/drm/drm_fb_helper.c: In function ‘fb_write_screen_base’: include/linux/minmax.h:18:28: warning: comparison of distinct pointer types lacks a cast ... drivers/gpu/drm/drm_fb_helper.c:2115:22: note: in expansion of macro ‘min’ 2115 | size_t alloc_size = min(count, PAGE_SIZE); | ^~~ Indeed, on 32-bit size_t is "unsigned int", not "unsigned long". Fixes: 222ec45f ("drm/fb_helper: Support framebuffers in I/O memory") Signed-off-by: -
KuoHsiang Chou authored
[New] Support AST2600 Signed-off-by:
KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.11-2020-11-05: amdgpu: - Add initial support for Vangogh - Add support for Green Sardine - Add initial support for Dimgrey Cavefish - Scatter/Gather display support for Renoir - Updates for Sienna Cichlid - Updates for Navy Flounder - SMU7 power improvements - Modifier support for gfx9+ - CI BACO fixes - Arcturus SMU fixes - Lots of code cleanups - DC fixes - Kernel doc fixes - Add more GPU HW client information to page fault error logging - MPO clock tuning for RV - FP fixes for DCN3 on ARM and PPC radeon: - Expose voltage via hwmon on Sumo APUs amdkfd: - Fix unique id handling - Misc fixes From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201105222749.201798-1-alexander.deucher@amd.com
-
- 09 Nov, 2020 16 commits
-
-
Thomas Zimmermann authored
Apparently, the function was never used at all. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20201106124224.21201-1-tzimmermann@suse.de
-
Thomas Zimmermann authored
As GEM object functions are now mandatory, DRM drivers based on CMA helpers either set them in their implementation of gem_create_object, or use the default via drm_gem_cma_create_object_default_funcs(). Simplify this by setting the default CMA object functions for all objects that don't have any functions of their own. Follows the pattern of similar code in SHMEM and VRAM helpers. The function drm_gem_cma_create_object_default_funcs() is redundant and therefore being removed. Signed-off-by:
-
Thomas Zimmermann authored
At least sparc64 requires I/O-specific access to framebuffers. This patch updates the fbdev console accordingly. For drivers with direct access to the framebuffer memory, the callback functions in struct fb_ops test for the type of memory and call the rsp fb_sys_ of fb_cfb_ functions. Read and write operations are implemented internally by DRM's fbdev helper. For drivers that employ a shadow buffer, fbdev's blit function retrieves the framebuffer address as struct dma_buf_map, and uses dma_buf_map interfaces to access the buffer. The bochs driver on sparc64 uses a workaround to flag the framebuffer as I/O memory and avoid a HW exception. With the introduction of struct dma_buf_map, this is not required any longer. The patch removes the rsp code from both, bochs and fbdev. v7: * use min_t(size_t,) (kernel test robot) * return the number of bytes read/written, if any (fbdev testcase) v5: * implement fb_read/fb_write internally (Daniel, Sam) v4: * move dma_buf_map changes into separate patch (Daniel) * TODO list: comment on fbdev updates (Daniel) Signed-off-by:
-
Thomas Zimmermann authored
To do framebuffer updates, one needs memcpy from system memory and a pointer-increment function. Add both interfaces with documentation. v5: * include <linux/string.h> to build on sparc64 (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Kernel DRM clients now store their framebuffer address in an instance of struct dma_buf_map. Depending on the buffer's location, the address refers to system or I/O memory. Callers of drm_client_buffer_vmap() receive a copy of the value in the call's supplied arguments. It can be accessed and modified with dma_buf_map interfaces. v6: * don't call page_to_phys() on framebuffers in I/O memory; warn instead (Daniel) Signed-off-by:
-
Thomas Zimmermann authored
GEM's vmap and vunmap interfaces now wrap memory pointers in struct dma_buf_map. Signed-off-by:
-
Thomas Zimmermann authored
This patch replaces the vmap/vunmap's use of raw pointers in GEM object functions with instances of struct dma_buf_map. GEM backends are converted as well. For most of them, this simply changes the returned type. TTM-based drivers now return information about the location of the memory, either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap() et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of implementing their own vmap callbacks. v7: * init QXL cursor to mapped BO buffer (kernel test robot) v5: * update vkms after switch to shmem v4: * use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian) * fix a trailing { in drm_gem_vmap() * remove several empty functions instead of converting them (Daniel) * comment uses of raw pointers with a TODO (Daniel) * TODO list: convert more helpers to use struct dma_buf_map Signed-off-by: -
Thomas Zimmermann authored
The new functions ttm_bo_{vmap,vunmap}() map and unmap a TTM BO in kernel address space. The mapping's address is returned as struct dma_buf_map. Each function is a simplified version of TTM's existing kmap code. Both functions respect the memory's location ani/or writecombine flags. On top TTM's functions, GEM TTM helpers got drm_gem_ttm_{vmap,vunmap}(), two helpers that convert a GEM object into the TTM BO and forward the call to TTM's vmap/vunmap. These helpers can be dropped into the rsp GEM object callbacks. v5: * use size_t for storing mapping size (Christian) * ignore premapped memory areas correctly in ttm_bo_vunmap() * rebase onto latest TTM interfaces (Christian) * remove BUG() from ttm_bo_vmap() (Christian) v4: * drop ttm_kmap_obj_to_dma_buf() in favor of vmap helpers (Daniel, Christian) Signed-off-by: -
Thomas Zimmermann authored
The functions exynos_drm_gem_prime_{vmap,vunmap}() are empty. Remove them before changing the interface to use struct drm_buf_map. As a side effect of removing drm_gem_prime_vmap(), the error code changes from ENOMEM to EOPNOTSUPP. Signed-off-by: -
Thomas Zimmermann authored
The function etnaviv_gem_prime_vunmap() is empty. Remove it before changing the interface to use struct drm_buf_map. Signed-off-by:
-
Thomas Zimmermann authored
The function drm_gem_cma_prime_vunmap() is empty. Remove it before changing the interface to use struct drm_buf_map. Signed-off-by:
-
Thomas Zimmermann authored
The parameters map and is_iomem are always of the same value. Removed them to prepares the function for conversion to struct dma_buf_map. v4: * don't check for !kmap->virtual; will always be false Signed-off-by:
-
Thomas Zimmermann authored
Drop the driver's udev field in favor of struct drm_device.dev. No functional changes made. v3: * upcast dev with udl_to_usb_device() v2: * upcast dev with drm_dev_get_usb_device() Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
-
Thomas Zimmermann authored
Drop the driver's udev field in favor of struct drm_device.dev. No functional changes made. v3: * upcast dev with gm12u320_to_usb_device() v2: * upcast dev with drm_dev_get_usb_device() Signed-off-by:
-
KuoHsiang Chou authored
[Bug] Change the vertical synchroous polary of 1920x1080 @60Hz from Negtive to Positive Signed-off-by: -
Alex Shi authored
Couple of variables are actually useless, remove them to save some gcc warning: drivers/video/fbdev/riva/riva_hw.c:250:21: warning: variable ‘mlwm’ set but not used [-Wunused-but-set-variable] drivers/video/fbdev/riva/riva_hw.c:665:15: warning: variable ‘vraw’ set but not used [-Wunused-but-set-variable] drivers/video/fbdev/riva/riva_hw.c:665:9: warning: variable ‘craw’ set but not used [-Wunused-but-set-variable] drivers/video/fbdev/riva/riva_hw.c:659:73: warning: variable ‘align’ set but not used [-Wunused-but-set-variable] drivers/video/fbdev/riva/riva_hw.c:659:50: warning: variable ‘color_key_enable’ set but not used [-Wunused-but-set-variable] Signed-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
