Commit 0a6b76dd ("mm: workingset: make shadow node shrinker memcg
aware") enabled cgroup-awareness in the shadow node shrinker, but forgot
to also enable cgroup-awareness in the list_lru the shadow nodes sit on.

Consequently, all shadow nodes are sitting on a global (per-NUMA node)
list, while the shrinker applies the limits according to the amount of
cache in the cgroup its shrinking.  The result is excessive pressure on
the shadow nodes from cgroups that have very little cache.

Enable memcg-mode on the shadow node LRUs, such that per-cgroup limits
are applied to per-cgroup lists.

Fixes: 0a6b76dd ("mm: workingset: make shadow node shrinker memcg aware")
Link: http://lkml.kernel.org/r/20170322005320.8165-1-hannes@cmpxchg.orgSigned-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vladimir Davydov <vdavydov@tarantool.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>	[4.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Huge pages are accounted as single units in the memcg's "file_mapped"
counter.  Account the correct number of base pages, like we do in the
corresponding node counter.

Link: http://lkml.kernel.org/r/20170322005111.3156-1-hannes@cmpxchg.orgSigned-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>	[4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Yang Li has reported that drain_all_pages triggers a WARN_ON which means
that this function is called earlier than the mm_percpu_wq is
initialized on arm64 with CMA configured:

  WARNING: CPU: 2 PID: 1 at mm/page_alloc.c:2423 drain_all_pages+0x244/0x25c
  Modules linked in:
  CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.11.0-rc1-next-20170310-00027-g64dfbc5 #127
  Hardware name: Freescale Layerscape 2088A RDB Board (DT)
  task: ffffffc07c4a6d00 task.stack: ffffffc07c4a8000
  PC is at drain_all_pages+0x244/0x25c
  LR is at start_isolate_page_range+0x14c/0x1f0
  [...]
   drain_all_pages+0x244/0x25c
   start_isolate_page_range+0x14c/0x1f0
   alloc_contig_range+0xec/0x354
   cma_alloc+0x100/0x1fc
   dma_alloc_from_contiguous+0x3c/0x44
   atomic_pool_init+0x7c/0x208
   arm64_dma_init+0x44/0x4c
   do_one_initcall+0x38/0x128
   kernel_init_freeable+0x1a0/0x240
   kernel_init+0x10/0xfc
   ret_from_fork+0x10/0x20

Fix this by moving the whole setup_vmstat which is an initcall right now
to init_mm_internals which will be called right after the WQ subsystem
is initialized.

Link: http://lkml.kernel.org/r/20170315164021.28532-1-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Yang Li <pku.leo@gmail.com>
Tested-by: Yang Li <pku.leo@gmail.com>
Tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I found that calling page migration for ksm pages causes the following
bug:

    page:ffffea0004d51180 count:2 mapcount:2 mapping:ffff88013c785141 index:0x913
    flags: 0x57ffffc0040068(uptodate|lru|active|swapbacked)
    raw: 0057ffffc0040068 ffff88013c785141 0000000000000913 0000000200000001
    raw: ffffea0004d5f9e0 ffffea0004d53f60 0000000000000000 ffff88007d81b800
    page dumped because: VM_BUG_ON_PAGE(!PageLocked(page))
    page->mem_cgroup:ffff88007d81b800
    ------------[ cut here ]------------
    kernel BUG at /src/linux-dev/mm/rmap.c:1086!
    invalid opcode: 0000 [#1] SMP
    Modules linked in: ppdev parport_pc virtio_balloon i2c_piix4 pcspkr parport i2c_core acpi_cpufreq ip_tables xfs libcrc32c ata_generic pata_acpi ata_piix 8139too libata virtio_blk 8139cp crc32c_intel mii virtio_pci virtio_ring serio_raw virtio floppy dm_mirror dm_region_hash dm_log dm_mod
    CPU: 0 PID: 3162 Comm: bash Not tainted 4.11.0-rc2-mm1+ #1
    Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
    RIP: 0010:do_page_add_anon_rmap+0x1ba/0x260
    RSP: 0018:ffffc90002473b30 EFLAGS: 00010282
    RAX: 0000000000000021 RBX: ffffea0004d51180 RCX: 0000000000000006
    RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff88007dc0dfe0
    RBP: ffffc90002473b58 R08: 00000000fffffffe R09: 00000000000001c1
    R10: 0000000000000005 R11: 00000000000001c0 R12: ffff880139ab3d80
    R13: 0000000000000000 R14: 0000700000000200 R15: 0000160000000000
    FS:  00007f5195f50740(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007fd450287000 CR3: 000000007a08e000 CR4: 00000000001406f0
    Call Trace:
     page_add_anon_rmap+0x18/0x20
     remove_migration_pte+0x220/0x2c0
     rmap_walk_ksm+0x143/0x220
     rmap_walk+0x55/0x60
     remove_migration_ptes+0x53/0x80
     migrate_pages+0x8ed/0xb60
     soft_offline_page+0x309/0x8d0
     store_soft_offline_page+0xaf/0xf0
     dev_attr_store+0x18/0x30
     sysfs_kf_write+0x3a/0x50
     kernfs_fop_write+0xff/0x180
     __vfs_write+0x37/0x160
     vfs_write+0xb2/0x1b0
     SyS_write+0x55/0xc0
     do_syscall_64+0x67/0x180
     entry_SYSCALL64_slow_path+0x25/0x25
    RIP: 0033:0x7f51956339e0
    RSP: 002b:00007ffcfa0dffc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
    RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f51956339e0
    RDX: 000000000000000c RSI: 00007f5195f53000 RDI: 0000000000000001
    RBP: 00007f5195f53000 R08: 000000000000000a R09: 00007f5195f50740
    R10: 000000000000000b R11: 0000000000000246 R12: 00007f5195907400
    R13: 000000000000000c R14: 0000000000000001 R15: 0000000000000000
    Code: fe ff ff 48 81 c2 00 02 00 00 48 89 55 d8 e8 2e c3 fd ff 48 8b 55 d8 e9 42 ff ff ff 48 c7 c6 e0 52 a1 81 48 89 df e8 46 ad fe ff <0f> 0b 48 83 e8 01 e9 7f fe ff ff 48 83 e8 01 e9 96 fe ff ff 48
    RIP: do_page_add_anon_rmap+0x1ba/0x260 RSP: ffffc90002473b30
    ---[ end trace a679d00f4af2df48 ]---
    Kernel panic - not syncing: Fatal exception
    Kernel Offset: disabled
    ---[ end Kernel panic - not syncing: Fatal exception

The problem is in the following lines:

    new = page - pvmw.page->index +
        linear_page_index(vma, pvmw.address);

The 'new' is calculated with 'page' which is given by the caller as a
destination page and some offset adjustment for thp.  But this doesn't
properly work for ksm pages because pvmw.page->index doesn't change for
each address but linear_page_index() changes, which means that 'new'
points to different pages for each addresses backed by the ksm page.  As
a result, we try to set totally unrelated pages as destination pages,
and that causes kernel crash.

This patch fixes the miscalculation and makes ksm page migration work
fine.

Fixes: 3fe87967 ("mm: convert remove_migration_pte() to use page_vma_mapped_walk()")
Link: http://lkml.kernel.org/r/1489717683-29905-1-git-send-email-n-horiguchi@ah.jp.nec.comSigned-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull PCI fixes from Bjorn Helgaas:

 - fix iProc memory corruption

 - fix ThunderX usage of unregistered PNP/ACPI ID

 - fix ThunderX resource reservation on early firmware

* tag 'pci-v4.11-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: thunder-pem: Add legacy firmware support for Cavium ThunderX host controller
  PCI: thunder-pem: Use Cavium assigned hardware ID for ThunderX host controller
  PCI: iproc: Save host bridge window resource in struct iproc_pcie

Pull thermal management fixes from Zhang Rui:

 - Fix a potential deadlock in cpu_cooling driver, which was introduced
   in 4.11-rc1. (Matthew Wilcox)

 - Fix the cpu_cooling and devfreq_cooling code to handle possible error
   return value from OPP calls, together with three minor fixes in the
   same patch series. (Viresh Kumar)

* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: cpu_cooling: Check OPP for errors
  thermal: cpu_cooling: Replace dev_warn with dev_err
  thermal: devfreq: Check OPP for errors
  thermal: devfreq_cooling: Replace dev_warn with dev_err
  thermal: devfreq: Simplify expression
  thermal: Fix potential deadlock in cpu_cooling

Pull block fixes from Jens Axboe:
 "Five fixes for this series:

   - a fix from me to ensure that blk-mq drivers that terminate IO in
     their ->queue_rq() handler by returning QUEUE_ERROR don't stall
     with a scheduler enabled.

   - four nbd fixes from Josef and Ratna, fixing various problems that
     are critical enough to go in for this cycle. They have been well
     tested"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nbd: replace kill_bdev() with __invalidate_device()
  nbd: set queue timeout properly
  nbd: set rq->errors to actual error code
  nbd: handle ERESTARTSYS properly
  blk-mq: include errors in did_work calculation

Merge xfrm_user validation fixes from Andy Whitcroft:
 "Two patches we are applying to Ubuntu for XFRM_MSG_NEWAE validation
  issue reported by ZDI.

  The first of these is the primary fix, and the second is for a more
  theoretical issue that Kees pointed out when reviewing the first"

* emailed patches from Andy Whitcroft <apw@canonical.com>:
  xfrm_user: validate XFRM_MSG_NEWAE incoming ESN size harder
  xfrm_user: validate XFRM_MSG_NEWAE XFRMA_REPLAY_ESN_VAL replay_window

Merge PTRACE_SETREGSET leakage fixes from Dave Martin:
 "This series is the collection of fixes I proposed on this topic, that
  have not yet appeared upstream or in the stable branches,

  The issue can leak kernel stack, but doesn't appear to allow userspace
  to attack the kernel directly.  The affected architectures are c6x,
  h8300, metag, mips and sparc.

  [ Mark Salter points out that c6x has no MMU or other mechanism to
    prevent userspace access to kernel code or data on c6x, but it
    doesn't hurt to clean that case up too. ]

  The bugs arise from use of user_regset_copyin(). Users of
  user_regset_copyin() can work in one of two ways:

   1) Copy directly to thread_struct or equivalent. (This seems to be
      the design assumption of the regset API, and is the most common
      approach.)

   2) Copy to a local variable and then transfer to thread_struct. (A
      significant minority of cases.)

  Buggy code typically involves approach 2"

* emailed patches from Dave Martin <Dave.Martin@arm.com>:
  sparc/ptrace: Preserve previous registers for short regset write
  mips/ptrace: Preserve previous registers for short regset write
  metag/ptrace: Reject partial NT_METAG_RPIPE writes
  metag/ptrace: Provide default TXSTATUS for short NT_PRSTATUS
  metag/ptrace: Preserve previous registers for short regset write
  h8300/ptrace: Fix incorrect register transfer count
  c6x/ptrace: Remove useless PTRACE_SETREGSET implementation

Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It's not clear what behaviour is sensible when doing partial write of
NT_METAG_RPIPE, so just don't bother.

This patch assumes that userspace will never rely on a partial SETREGSET
in this case, since it's not clear what should happen anyway.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill TXSTATUS, a well-defined default value is used, based on the
task's current value.
Suggested-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

regs_set() and regs_get() are vulnerable to an off-by-1 buffer overrun
if CONFIG_CPU_H8S is set, since this adds an extra entry to
register_offset[] but not to user_regs_struct.

So, iterate over user_regs_struct based on its actual size, not based on
the length of register_offset[].
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpr_set won't work correctly and can never have been tested, and the
correct behaviour is not clear due to the endianness-dependent task
layout.

So, just remove it.  The core code will now return -EOPNOTSUPPORT when
trying to set NT_PRSTATUS on this architecture until/unless a correct
implementation is supplied.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Kees Cook has pointed out that xfrm_replay_state_esn_len() is subject to
wrapping issues.  To ensure we are correctly ensuring that the two ESN
structures are the same size compare both the overall size as reported
by xfrm_replay_state_esn_len() and the internal length are the same.

CVE-2017-7184
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When a new xfrm state is created during an XFRM_MSG_NEWSA call we
validate the user supplied replay_esn to ensure that the size is valid
and to ensure that the replay_window size is within the allocated
buffer.  However later it is possible to update this replay_esn via a
XFRM_MSG_NEWAE call.  There we again validate the size of the supplied
buffer matches the existing state and if so inject the contents.  We do
not at this point check that the replay_window is within the allocated
memory.  This leads to out-of-bounds reads and writes triggered by
netlink packets.  This leads to memory corruption and the potential for
priviledge escalation.

We already attempt to validate the incoming replay information in
xfrm_new_ae() via xfrm_replay_verify_len().  This confirms that the user
is not trying to change the size of the replay state buffer which
includes the replay_esn.  It however does not check the replay_window
remains within that buffer.  Add validation of the contained
replay_window.

CVE-2017-7184
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull virtio fixes from Michael Tsirkin:
 "Fixes to multiple issues in virtio.

  Most notably a regression fix for crashes reported by Fedora users.
  Hibernate is still reportedly broken, working on it"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_balloon: prevent uninitialized variable use
  virtio-balloon: use actual number of stats for stats queue buffers
  virtio_balloon: init 1st buffer in stats vq
  virtio_pci: fix out of bound access for msix_names

Pull KVM fixes from Paolo Bonzini:
 "All x86-specific, apart from some arch-independent syzkaller fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: cleanup the page tracking SRCU instance
  KVM: nVMX: fix nested EPT detection
  KVM: pci-assign: do not map smm memory slot pages in vt-d page tables
  KVM: kvm_io_bus_unregister_dev() should never fail
  KVM: VMX: Fix enable VPID conditions
  KVM: nVMX: Fix nested VPID vmx exec control
  KVM: x86: correct async page present tracepoint
  kvm: vmx: Flush TLB when the APIC-access address changes
  KVM: x86: use pic/ioapic destructor when destroy vm
  KVM: x86: check existance before destroy
  KVM: x86: clear bus pointer when destroyed
  KVM: Documentation: document MCE ioctls
  KVM: nVMX: don't reset kvm mmu twice
  PTP: fix ptr_ret.cocci warnings
  kvm: fix usage of uninit spinlock in avic_vm_destroy()
  KVM: VMX: downgrade warning on unexpected exit code

The latest gcc-7.0.1 snapshot reports a new warning:

virtio/virtio_balloon.c: In function 'update_balloon_stats':
virtio/virtio_balloon.c:258:26: error: 'events[2]' is used uninitialized in this function [-Werror=uninitialized]
virtio/virtio_balloon.c:260:26: error: 'events[3]' is used uninitialized in this function [-Werror=uninitialized]
virtio/virtio_balloon.c:261:56: error: 'events[18]' is used uninitialized in this function [-Werror=uninitialized]
virtio/virtio_balloon.c:262:56: error: 'events[17]' is used uninitialized in this function [-Werror=uninitialized]

This seems absolutely right, so we should add an extra check to
prevent copying uninitialized stack data into the statistics.
>From all I can tell, this has been broken since the statistics code
was originally added in 2.6.34.

Fixes: 9564e138 ("virtio: Add memory statistics reporting to the balloon driver (V4)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

The virtio balloon driver contained a not-so-obvious invariant that
update_balloon_stats has to update exactly VIRTIO_BALLOON_S_NR counters
in order to send valid stats to the host. This commit fixes it by having
update_balloon_stats return the actual number of counters, and its
callers use it when pushing buffers to the stats virtqueue.

Note that it is still out of spec to change the number of counters
at run-time. "Driver MUST supply the same subset of statistics in all
buffers submitted to the statsq."
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

When init_vqs runs, virtio_balloon.stats is either uninitialized or
contains stale values. The host updates its state with garbage data
because it has no way of knowing that this is just a marker buffer
used for signaling.

This patch updates the stats before pushing the initial buffer.

Alternative fixes:
* Push an empty buffer in init_vqs. Not easily done with the current
  virtio implementation and violates the spec "Driver MUST supply the
  same subset of statistics in all buffers submitted to the statsq".
* Push a buffer with invalid tags in init_vqs. Violates the same
  spec clause, plus "invalid tag" is not really defined.

Note: the spec says:
	When using the legacy interface, the device SHOULD ignore all values in
	the first buffer in the statsq supplied by the driver after device
	initialization. Note: Historically, drivers supplied an uninitialized
	buffer in the first buffer.

Unfortunately QEMU does not seem to implement the recommendation
even for the legacy interface.

Cc: stable@vger.kernel.org
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Fedora has received multiple reports of crashes when running
4.11 as a guest

https://bugzilla.redhat.com/show_bug.cgi?id=1430297
https://bugzilla.redhat.com/show_bug.cgi?id=1434462
https://bugzilla.kernel.org/show_bug.cgi?id=194911
https://bugzilla.redhat.com/show_bug.cgi?id=1433899

The crashes are not always consistent but they are generally
some flavor of oops or GPF in virtio related code. Multiple people
have done bisections (Thank you Thorsten Leemhuis and
Richard W.M. Jones) and found this commit to be at fault

07ec5148 is the first bad commit
commit 07ec5148
Author: Christoph Hellwig <hch@lst.de>
Date:   Sun Feb 5 18:15:19 2017 +0100

    virtio_pci: use shared interrupts for virtqueues

The issue seems to be an out of bounds access to the msix_names
array corrupting kernel memory.

Fixes: 07ec5148 ("virtio_pci: use shared interrupts for virtqueues")
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>

SRCU uses a delayed work item.  Skip cleaning it up, and
the result is use-after-free in the work item callbacks.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: 0eb05bf2Reviewed-by: Xiao Guangrong <xiaoguangrong.eric@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The nested_ept_enabled flag introduced in commit 7ca29de2 was not
computed correctly. We are interested only in L1's EPT state, not the
the combined L0+L1 value.

In particular, if L0 uses EPT but L1 does not, nested_ept_enabled must
be false to make sure that PDPSTRs are loaded based on CR3 as usual,
because the special case described in 26.3.2.4 Loading Page-Directory-
Pointer-Table Entries does not apply.

Fixes: 7ca29de2 ("KVM: nVMX: fix CR3 load if L2 uses PAE paging and EPT")
Cc: qemu-stable@nongnu.org
Reported-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

or VM memory are not put thus leaked in kvm_iommu_unmap_memslots() when
destroy VM.

This is consistent with current vfio implementation.
Signed-off-by: herongguang <herongguang.he@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull EDAC updates from Borislav Petkov:
 "A new EDAC driver for the Pondicherry2 memory controller IP found in
  the Intel Apollo Lake platform and the Denverton microserver.

  Plus small fixlets.

  Normally I had this queued for 4.12 but Tony requested for the
  pnd2_edac driver to possibly land in 4.11 therefore I'm sending it to
  you now.

  It is a driver for new hardware which people don't have yet so it
  shouldn't cause any regressions.

  The couple of patches ontop of it show that Qiuxu actually did test it
  on the hardware he has access to :)"

* tag 'edac_for_4.11_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, pnd2_edac: Fix reported DIMM number
  EDAC, pnd2_edac: Fix !EDAC_DEBUG build
  EDAC: Select DEBUG_FS
  EDAC, pnd2_edac: Add new EDAC driver for Intel SoC platforms
  EDAC, i5000, i5400: Fix use of MTR_DRAM_WIDTH macro
  EDAC, xgene: Fix wrongly spelled "procesing"

Pull more pin control fixes from Linus Walleij:
 "Here is a bunch of pin control fixes again

  A bit more than I'd like for this subsystem at this point, but what
  can I do. They are all driver fixes for hardware issues, as like "we
  forgot", "we didn't think of the fact that this could happen", "oops
  that one goes there" etc

   - Kconfig fixup for the TI IOdelay pinctrl-single add-on

   - fix up a typo in the meson i2c ao groups

   - switch a remapping back to use devm_ioremap() as
     devm_ioremap_resource() does not allow for sharing memory regions

   - do not clear the Qualcomm irq status bit in irq_unmask(), as this
     can lead to missing interrupts while the irq handler is executing

   - add irq_request/release_resources() on the ST driver

   - add a bunch of mysteriously missing pingroups for high numbered
     pins in the Qualcomm ipq4019 driver"

* tag 'pinctrl-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: ipq4019: add missing pingroups for pins > 70
  pinctrl: st: add irq_request/release_resources callbacks
  pinctrl: qcom: Don't clear status bit on irq_unmask
  pinctrl: samsung: Fix memory mapping code
  pinctrl: meson-gxbb: Fix typo in i2c ao groups
  pinctrl: ti: The IODelay driver is a DRA7xxx feature so depend on that SoC

Pull m68k updates from Geert Uytterhoeven:

  - build warning fix

  - defconfig updates

  - wire up new statx syscall

* tag 'm68k-for-v4.11-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Wire up statx
  m68k/defconfig: Update defconfigs for v4.11-rc1
  m68k/bitops: Correct signature of test_bit()

Pull char/misc driver fixes from Greg KH:
 "A smattering of different small fixes for some random driver
  subsystems. Nothing all that major, just resolutions for reported
  issues and bugs.

  All have been in linux-next with no reported issues"

* tag 'char-misc-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  extcon: int3496: Set the id pin to direction-input if necessary
  extcon: int3496: Use gpiod_get instead of gpiod_get_index
  extcon: int3496: Add dependency on X86 as it's Intel specific
  extcon: int3496: Add GPIO ACPI mapping table
  extcon: int3496: Rename GPIO pins in accordance with binding
  vmw_vmci: handle the return value from pci_alloc_irq_vectors correctly
  ppdev: fix registering same device name
  parport: fix attempt to write duplicate procfiles
  auxdisplay: img-ascii-lcd: add missing sentinel entry in img_ascii_lcd_matches
  Drivers: hv: vmbus: Don't leak memory when a channel is rescinded
  Drivers: hv: vmbus: Don't leak channel ids
  Drivers: hv: util: don't forget to init host_ts.lock
  Drivers: hv: util: move waiting for release to hv_utils_transport itself
  vmbus: remove hv_event_tasklet_disable/enable
  vmbus: use rcu for per-cpu channel list
  mei: don't wait for os version message reply
  mei: fix deadlock on mei reset
  intel_th: pci: Add Gemini Lake support
  intel_th: pci: Add Denverton SOC support
  intel_th: Don't leak module refcount on failure to activate
  ...

Merge tag 'driver-core-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fix from Greg KH:
 "Here is a single kernfs fix for 4.11-rc4 that resolves a reported
  issue.

  It has been in linux-next with no reported issues"

* tag 'driver-core-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kernfs: Check KERNFS_HAS_RELEASE before calling kernfs_release_file()

Pull tty/serial driver fixes from Greg KH:
 "Here are some tty and serial driver fixes for 4.11-rc4.

  One of these fix a long-standing issue in the ldisc code that was
  found by Dmitry Vyukov with his great fuzzing work. The other fixes
  resolve other reported issues, and there is one revert of a patch in
  4.11-rc1 that wasn't correct.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: fix data race in tty_ldisc_ref_wait()
  tty: don't panic on OOM in tty_set_ldisc()
  Revert "tty: serial: pl011: add ttyAMA for matching pl011 console"
  tty: acpi/spcr: QDF2400 E44 checks for wrong OEM revision
  serial: 8250_dw: Fix breakage when HAVE_CLK=n
  serial: 8250_dw: Honor clk_round_rate errors in dw8250_set_termios

Pull IIO driver fixes from Greg KH:
 "Here are some small IIO driver fixes for 4.11-rc4 that resolve a
  number of tiny reported issues. All of these have been in linux-next
  for a while with no reported issues"

* tag 'staging-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: imu: st_lsm6dsx: fix FIFO_CTRL2 overwrite during watermark configuration
  iio: adc: ti_am335x_adc: fix fifo overrun recovery
  iio: sw-device: Fix config group initialization
  iio: magnetometer: ak8974: remove incorrect __exit markups
  iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3

Pull USB/PHY fixes from Greg KH:
 "Here are a number of small USB and PHY driver fixes for 4.11-rc4.

  Nothing major here, just an bunch of small fixes, and a handfull of
  good fixes from Johan for devices with crazy descriptors. There are a
  few new device ids in here as well.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  usb: gadget: f_hid: fix: Don't access hidg->req without spinlock held
  usb: gadget: udc: remove pointer dereference after free
  usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed
  usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval
  usb: gadget: acm: fix endianness in notifications
  usb: dwc3: gadget: delay unmap of bounced requests
  USB: serial: qcserial: add Dell DW5811e
  usb: hub: Fix crash after failure to read BOS descriptor
  ACM gadget: fix endianness in notifications
  USB: usbtmc: fix probe error path
  USB: usbtmc: add missing endpoint sanity check
  USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems
  usb: musb: fix possible spinlock deadlock
  usb: musb: dsps: fix iounmap in error and exit paths
  usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer
  usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk
  uwb: i1480-dfu: fix NULL-deref at probe
  uwb: hwa-rc: fix NULL-deref at probe
  USB: wusbcore: fix NULL-deref at probe
  USB: uss720: fix NULL-deref at probe
  ...

Pull more powerpc fixes from Michael Ellerman:
 "These are all pretty minor. The fix for idle wakeup would be a bad bug
  but has not been observed in practice.

  The update to the gcc-plugins docs was Cc'ed to Kees and Jon, Kees
  OK'ed it going via powerpc and I didn't hear from Jon.

   - cxl: Route eeh events to all slices for pci_channel_io_perm_failure state

   - powerpc/64s: Fix idle wakeup potential to clobber registers

   - Revert "powerpc/64: Disable use of radix under a hypervisor"

   - gcc-plugins: update architecture list in documentation

  Thanks to: Andrew Donnellan, Nicholas Piggin, Paul Mackerras, Vaibhav
  Jain"

* tag 'powerpc-4.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  gcc-plugins: update architecture list in documentation
  Revert "powerpc/64: Disable use of radix under a hypervisor"
  powerpc/64s: Fix idle wakeup potential to clobber registers
  cxl: Route eeh events to all slices for pci_channel_io_perm_failure state

Pull ext4 fixes from Ted Ts'o:
 "Fix a memory leak on an error path, and two races when modifying
  inodes relating to the inline_data and metadata checksum features"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix two spelling nits
  ext4: lock the xattr block before checksuming it
  jbd2: don't leak memory if setting up journal fails
  ext4: mark inode dirty after converting inline directory

DIMM number passed to edac_mc_handle_error() was accidentally hardcoded
to zero. Pass in the correct daddr->dimm value.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>

Pull fscrypto fixes from Ted Ts'o:
 "A code cleanup and bugfix for fs/crypto"

* tag 'fscrypt-for-linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
  fscrypt: eliminate ->prepare_context() operation
  fscrypt: remove broken support for detecting keyring key revocation