Fix the sequence required for PCIE-AER. While slot reset occurs, firmware
might not be ready and the driver needs to check for its recovery.  We
also need to remap the health registers for some chips and clear the
resource reservations.  The resources will be allocated again during
bnxt_io_resume().

Fixes: fb1e6e56 ("bnxt_en: Fix AER recovery.")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Introduce bnxt_clear_reservations() to clear the reserved attributes only.
This will be used in the next patch to fix PCI AER handling.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

kmemleak reports after running test_progs:

unreferenced object 0xffff8881b1672dc0 (size 232):
  comm "test_progs", pid 394388, jiffies 4354712116 (age 841.975s)
  hex dump (first 32 bytes):
    e0 84 d7 a8 81 88 ff ff 80 2c 67 b1 81 88 ff ff  .........,g.....
    00 40 c5 9b 81 88 ff ff 00 00 00 00 00 00 00 00  .@..............
  backtrace:
    [<00000000c8f01748>] napi_skb_cache_get+0xd4/0x150
    [<0000000041c7fc09>] __napi_build_skb+0x15/0x50
    [<00000000431c7079>] __napi_alloc_skb+0x26e/0x540
    [<000000003ecfa30e>] napi_get_frags+0x59/0x140
    [<0000000099b2199e>] tun_get_user+0x183d/0x3bb0 [tun]
    [<000000008a5adef0>] tun_chr_write_iter+0xc0/0x1b1 [tun]
    [<0000000049993ff4>] do_iter_readv_writev+0x19f/0x320
    [<000000008f338ea2>] do_iter_write+0x135/0x630
    [<000000008a3377a4>] vfs_writev+0x12e/0x440
    [<00000000a6b5639a>] do_writev+0x104/0x280
    [<00000000ccf065d8>] do_syscall_64+0x3b/0x90
    [<00000000d776e329>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

The issue occurs in the following scenarios:
tun_get_user()
  napi_gro_frags()
    napi_frags_finish()
      case GRO_NORMAL:
        gro_normal_one()
          list_add_tail(&skb->list, &napi->rx_list);
          <-- While napi->rx_count < READ_ONCE(gro_normal_batch),
          <-- gro_normal_list() is not called, napi->rx_list is not empty
  <-- not ask to complete the gro work, will cause memory leaks in
  <-- following tun_napi_del()
...
tun_napi_del()
  netif_napi_del()
    __netif_napi_del()
    <-- &napi->rx_list is not empty, which caused memory leaks

To fix, add napi_complete() after napi_gro_frags().

Fixes: 90e33d45 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In scenarios where multiple errors have occurred
for a SQ before SW starts handling error interrupt,
SQ_CTX[OP_INT] may get overwritten leading to
NIX_LF_SQ_OP_INT returning incorrect value.
To workaround this read LMT, MNQ and SQ individual
error status registers to determine the cause of error.

Fixes: 4ff7d148 ("octeontx2-pf: Error handling support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move am65_cpsw_nuss_phylink_cleanup() call to after
am65_cpsw_nuss_cleanup_ndev() so phylink is still valid
to prevent the below Segmentation fault on module remove when
first slave link is up.

[   31.652944] Unable to handle kernel paging request at virtual address 00040008000005f4
[   31.684627] Mem abort info:
[   31.687446]   ESR = 0x0000000096000004
[   31.704614]   EC = 0x25: DABT (current EL), IL = 32 bits
[   31.720663]   SET = 0, FnV = 0
[   31.723729]   EA = 0, S1PTW = 0
[   31.740617]   FSC = 0x04: level 0 translation fault
[   31.756624] Data abort info:
[   31.759508]   ISV = 0, ISS = 0x00000004
[   31.776705]   CM = 0, WnR = 0
[   31.779695] [00040008000005f4] address between user and kernel address ranges
[   31.808644] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[   31.814928] Modules linked in: wlcore_sdio wl18xx wlcore mac80211 libarc4 cfg80211 rfkill crct10dif_ce phy_gmii_sel ti_am65_cpsw_nuss(-) sch_fq_codel ipv6
[   31.828776] CPU: 0 PID: 1026 Comm: modprobe Not tainted 6.1.0-rc2-00012-gfabfcf7dafdb-dirty #160
[   31.837547] Hardware name: Texas Instruments AM625 (DT)
[   31.842760] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   31.849709] pc : phy_stop+0x18/0xf8
[   31.853202] lr : phylink_stop+0x38/0xf8
[   31.857031] sp : ffff80000a0839f0
[   31.860335] x29: ffff80000a0839f0 x28: ffff000000de1c80 x27: 0000000000000000
[   31.867462] x26: 0000000000000000 x25: 0000000000000000 x24: ffff80000a083b98
[   31.874589] x23: 0000000000000800 x22: 0000000000000001 x21: ffff000001bfba90
[   31.881715] x20: ffff0000015ee000 x19: 0004000800000200 x18: 0000000000000000
[   31.888842] x17: ffff800076c45000 x16: ffff800008004000 x15: 000058e39660b106
[   31.895969] x14: 0000000000000144 x13: 0000000000000144 x12: 0000000000000000
[   31.903095] x11: 000000000000275f x10: 00000000000009e0 x9 : ffff80000a0837d0
[   31.910222] x8 : ffff000000de26c0 x7 : ffff00007fbd6540 x6 : ffff00007fbd64c0
[   31.917349] x5 : ffff00007fbd0b10 x4 : ffff00007fbd0b10 x3 : ffff00007fbd3920
[   31.924476] x2 : d0a07fcff8b8d500 x1 : 0000000000000000 x0 : 0004000800000200
[   31.931603] Call trace:
[   31.934042]  phy_stop+0x18/0xf8
[   31.937177]  phylink_stop+0x38/0xf8
[   31.940657]  am65_cpsw_nuss_ndo_slave_stop+0x28/0x1e0 [ti_am65_cpsw_nuss]
[   31.947452]  __dev_close_many+0xa4/0x140
[   31.951371]  dev_close_many+0x84/0x128
[   31.955115]  unregister_netdevice_many+0x130/0x6d0
[   31.959897]  unregister_netdevice_queue+0x94/0xd8
[   31.964591]  unregister_netdev+0x24/0x38
[   31.968504]  am65_cpsw_nuss_cleanup_ndev.isra.0+0x48/0x70 [ti_am65_cpsw_nuss]
[   31.975637]  am65_cpsw_nuss_remove+0x58/0xf8 [ti_am65_cpsw_nuss]

Cc: <Stable@vger.kernel.org> # v5.18+
Fixes: e8609e69 ("net: ethernet: ti: am65-cpsw: Convert to PHYLINK")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sabrina Dubroca says:

====================
macsec: offload-related fixes

I'm working on a dummy offload for macsec on netdevsim. It just has a
small SecY and RXSC table so I can trigger failures easily on the
ndo_* side. It has exposed a couple of issues.

The first patch is a revert of commit c850240b ("net: macsec:
report real_dev features when HW offloading is enabled"). That commit
tried to improve the performance of macsec offload by taking advantage
of some of the NIC's features, but in doing so, broke macsec offload
when the lower device supports both macsec and ipsec offload, as the
ipsec offload feature flags were copied from the real device. Since
the macsec device doesn't provide xdo_* ops, the XFRM core rejects the
registration of the new macsec device in xfrm_api_check.

I'm working on re-adding those feature flags when offload is
available, but I haven't fully solved that yet. I think it would be
safer to do that second part in net-next considering how complex
feature interactions tend to be.

v2:
 - better describe the issue introduced by commit c850240b (Leon
   Romanovsky)
 - patch #3: drop unnecessary !! (Leon Romanovsky)

v3:
 - patch #3: drop extra newline (Jakub Kicinski)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

macsec_add_rxsa and macsec_add_txsa copy the key to an on-stack
offloading context to pass it to the drivers, but leaves it there when
it's done. Clear it with memzero_explicit as soon as it's not needed
anymore.

Fixes: 3cf3227a ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

macsec_is_configured incorrectly uses secy->n_rx_sc to check if some
RXSCs exist. secy->n_rx_sc only counts the number of active RXSCs, but
there can also be inactive SCs as well, which may be stored in the
driver (in case we're disabling offloading), or would have to be
pushed to the device (in case we're trying to enable offloading).

As long as RXSCs active on creation and never turned off, the issue is
not visible.

Fixes: dcb780fb ("net: macsec: add nla support for changing the offloading selection")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

secy->n_rx_sc is supposed to be the number of _active_ rxsc's within a
secy. This is then used by macsec_send_sci to help decide if we should
add the SCI to the header or not.

This logic is currently broken when we create a new RXSC and turn it
off at creation, as create_rx_sc always sets ->active to true (and
immediately uses that to increment n_rx_sc), and only later
macsec_add_rxsc sets rx_sc->active.

Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we get an inconsistent state:
 - netlink returns the error to userspace
 - the RXSC is installed but not offloaded

Then the device could get confused when we try to add an RXSA, because
the RXSC isn't supposed to exist.

Fixes: 3cf3227a ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit c850240b.

That commit tried to improve the performance of macsec offload by
taking advantage of some of the NIC's features, but in doing so, broke
macsec offload when the lower device supports both macsec and ipsec
offload, as the ipsec offload feature flags (mainly NETIF_F_HW_ESP)
were copied from the real device. Since the macsec device doesn't
provide xdo_* ops, the XFRM core rejects the registration of the new
macsec device in xfrm_api_check.

Example perf trace when running
  ip link add link eni1np1 type macsec port 4 offload mac

    ip   737 [003]   795.477676: probe:xfrm_dev_event__REGISTER      name="macsec0" features=0x1c000080014869
              xfrm_dev_event+0x3a
              notifier_call_chain+0x47
              register_netdevice+0x846
              macsec_newlink+0x25a

    ip   737 [003]   795.477687:   probe:xfrm_dev_event__return      ret=0x8002 (NOTIFY_BAD)
             notifier_call_chain+0x47
             register_netdevice+0x846
             macsec_newlink+0x25a

dev->features includes NETIF_F_HW_ESP (0x04000000000000), so
xfrm_api_check returns NOTIFY_BAD because we don't have
dev->xfrmdev_ops on the macsec device.

We could probably propagate GSO and a few other features from the
lower device, similar to macvlan. This will be done in a future patch.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In some conditions, background processes in udpgro don't have enough
time to set up the sockets. When foreground processes start, this
results in the test failing with "./udpgso_bench_tx: sendmsg: Connection
refused". For instance, this happens from time to time on a Qualcomm
SA8540P SoC running CentOS Stream 9.

To fix this, increase the time given to background processes to
complete the startup before foreground processes start.
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As the argument struct hnae3_handle *h of function hclge_get_dscp_prio()
can be other client registered in hnae3 layer, we need to transform it
into hnae3_handle of local nic client to get right dscp settings for
other clients.

Fixes: dfea275e ("net: hns3: optimize converting dscp to priority process of hns3_nic_select_queue()")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix build errors when MACSEC=m and OCTEONTX2_PF=y by having
OCTEONTX2_PF depend on MACSEC if it is enabled. By adding
"|| !MACSEC", this means that MACSEC is not required -- it can
be disabled for this driver.

drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_remove':
../drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:(.text+0x2fd0): undefined reference to `cn10k_mcs_free'
mips64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_mbox_up_handler_mcs_intr_notify':
../drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:(.text+0x4610): undefined reference to `cn10k_handle_mcs_event'
Reported-by: kernel test robot <lkp@intel.com>
Fixes: c54ffc73 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Subbaraya Sundeep <sbhatta@marvell.com>
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: Geetha sowjanya <gakula@marvell.com>
Cc: hariprasad <hkelam@marvell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Kalle Valo says:

====================
wireless fixes for v6.1

Second set of fixes for v6.1. Some fixes to char type usage in
drivers, memory leaks in the stack and also functionality fixes. The
rt2x00 char type fix is a larger (but still simple) commit, otherwise
the fixes are small in size.

* tag 'wireless-2022-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update()
  wifi: ath11k: Fix QCN9074 firmware boot on x86
  wifi: mac80211: Set TWT Information Frame Disabled bit as 1
  wifi: mac80211: Fix ack frame idr leak when mesh has no route
  wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit()
  wifi: brcmfmac: Fix potential buffer overflow in brcmf_fweh_event_worker()
  wifi: airo: do not assign -1 to unsigned char
  wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support
  wifi: cfg80211: Fix bitrates overflow issue
  wifi: cfg80211: fix memory leak in query_regdb_file()
  wifi: mac80211: fix memory free error when registering wiphy fail
  wifi: cfg80211: silence a sparse RCU warning
  wifi: rt2x00: use explicitly signed or unsigned types
====================

Link: https://lore.kernel.org/r/20221103125315.04E57C433C1@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit 3dcbdb13 ("net: gso: Fix skb_segment splat when
splitting gso_size mangled skb having linear-headed frag_list"), it is
allowed to change gso_size of a GRO packet. However, that commit assumes
that "checking the first list_skb member suffices; i.e if either of the
list_skb members have non head_frag head, then the first one has too".

It turns out this assumption does not hold. We've seen BUG_ON being hit
in skb_segment when skbs on the frag_list had differing head_frag with
the vmxnet3 driver. This happens because __netdev_alloc_skb and
__napi_alloc_skb can return a skb that is page backed or kmalloced
depending on the requested size. As the result, the last small skb in
the GRO packet can be kmalloced.

There are three different locations where this can be fixed:

(1) We could check head_frag in GRO and not allow GROing skbs with
    different head_frag. However, that would lead to performance
    regression on normal forward paths with unmodified gso_size, where
    !head_frag in the last packet is not a problem.

(2) Set a flag in bpf_skb_net_grow and bpf_skb_net_shrink indicating
    that NETIF_F_SG is undesirable. That would need to eat a bit in
    sk_buff. Furthermore, that flag can be unset when all skbs on the
    frag_list are page backed. To retain good performance,
    bpf_skb_net_grow/shrink would have to walk the frag_list.

(3) Walk the frag_list in skb_segment when determining whether
    NETIF_F_SG should be cleared. This of course slows things down.

This patch implements (3). To limit the performance impact in
skb_segment, the list is walked only for skbs with SKB_GSO_DODGY set
that have gso_size changed. Normal paths thus will not hit it.

We could check only the last skb but since we need to walk the whole
list anyway, let's stay on the safe side.

Fixes: 3dcbdb13 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/e04426a6a91baf4d1081e1b478c82b5de25fdf21.1667407944.git.jbenc@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
bpf 2022-11-04

We've added 8 non-merge commits during the last 3 day(s) which contain
a total of 10 files changed, 113 insertions(+), 16 deletions(-).

The main changes are:

1) Fix memory leak upon allocation failure in BPF verifier's stack state
   tracking, from Kees Cook.

2) Fix address leakage when BPF progs release reference to an object,
   from Youlin Li.

3) Fix BPF CI breakage from buggy in.h uapi header dependency,
   from Andrii Nakryiko.

4) Fix bpftool pin sub-command's argument parsing, from Pu Lehui.

5) Fix BPF sockmap lockdep warning by cancelling psock work outside
   of socket lock, from Cong Wang.

6) Follow-up for BPF sockmap to fix sk_forward_alloc accounting,
   from Wang Yufen.

bpf-for-netdev

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Add verifier test for release_reference()
  bpf: Fix wrong reg type conversion in release_reference()
  bpf, sock_map: Move cancel_work_sync() out of sock lock
  tools/headers: Pull in stddef.h to uapi to fix BPF selftests build in CI
  net/ipv4: Fix linux/in.h header dependencies
  bpftool: Fix NULL pointer dereference when pin {PROG, MAP, LINK} without FILE
  bpf, sockmap: Fix the sk->sk_forward_alloc warning of sk_stream_kill_queues
  bpf, verifier: Fix memory leak in array reallocation for stack state
====================

Link: https://lore.kernel.org/r/20221104000445.30761-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add a test case to ensure that released pointer registers will not be
leaked into the map.

Before fix:

  ./test_verifier 984
    984/u reference tracking: try to leak released ptr reg FAIL
    Unexpected success to load!
    verification time 67 usec
    stack depth 4
    processed 23 insns (limit 1000000) max_states_per_insn 0 total_states 2
    peak_states 2 mark_read 1
    984/p reference tracking: try to leak released ptr reg OK
    Summary: 1 PASSED, 0 SKIPPED, 1 FAILED

After fix:

  ./test_verifier 984
    984/u reference tracking: try to leak released ptr reg OK
    984/p reference tracking: try to leak released ptr reg OK
    Summary: 2 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Youlin Li <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221103093440.3161-2-liulin063@gmail.com

Some helper functions will allocate memory. To avoid memory leaks, the
verifier requires the eBPF program to release these memories by calling
the corresponding helper functions.

When a resource is released, all pointer registers corresponding to the
resource should be invalidated. The verifier use release_references() to
do this job, by apply  __mark_reg_unknown() to each relevant register.

It will give these registers the type of SCALAR_VALUE. A register that
will contain a pointer value at runtime, but of type SCALAR_VALUE, which
may allow the unprivileged user to get a kernel pointer by storing this
register into a map.

Using __mark_reg_not_init() while NOT allow_ptr_leaks can mitigate this
problem.

Fixes: fd978bf7 ("bpf: Add reference tracking to verifier")
Signed-off-by: Youlin Li <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221103093440.3161-1-liulin063@gmail.com

Pull networking fixes from Paolo Abeni:
 "Including fixes from bluetooth and netfilter.

  Current release - regressions:

   - net: several zerocopy flags fixes

   - netfilter: fix possible memory leak in nf_nat_init()

   - openvswitch: add missing .resv_start_op

  Previous releases - regressions:

   - neigh: fix null-ptr-deref in neigh_table_clear()

   - sched: fix use after free in red_enqueue()

   - dsa: fall back to default tagger if we can't load the one from DT

   - bluetooth: fix use-after-free in l2cap_conn_del()

  Previous releases - always broken:

   - netfilter: netlink notifier might race to release objects

   - nfc: fix potential memory leak of skb

   - bluetooth: fix use-after-free caused by l2cap_reassemble_sdu

   - bluetooth: use skb_put to set length

   - eth: tun: fix bugs for oversize packet when napi frags enabled

   - eth: lan966x: fixes for when MTU is changed

   - eth: dwmac-loongson: fix invalid mdio_node"

* tag 'net-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
  vsock: fix possible infinite sleep in vsock_connectible_wait_data()
  vsock: remove the unused 'wait' in vsock_connectible_recvmsg()
  ipv6: fix WARNING in ip6_route_net_exit_late()
  bridge: Fix flushing of dynamic FDB entries
  net, neigh: Fix null-ptr-deref in neigh_table_clear()
  net/smc: Fix possible leaked pernet namespace in smc_init()
  stmmac: dwmac-loongson: fix invalid mdio_node
  ibmvnic: Free rwi on reset success
  net: mdio: fix undefined behavior in bit shift for __mdiobus_register
  Bluetooth: L2CAP: Fix attempting to access uninitialized memory
  Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
  Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
  Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
  Bluetooth: L2CAP: Fix memory leak in vhci_write
  Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
  Bluetooth: virtio_bt: Use skb_put to set length
  Bluetooth: hci_conn: Fix CIS connection dst_type handling
  Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
  netfilter: ipset: enforce documented limit to prevent allocating huge memory
  isdn: mISDN: netjet: fix wrong check of device registration
  ...

Pull powerpc fixes from Michael Ellerman:

 - Fix an endian thinko in the asm-generic compat_arg_u64() which led to
   syscall arguments being swapped for some compat syscalls.

 - Fix syscall wrapper handling of syscalls with 64-bit arguments on
   32-bit kernels, which led to syscall arguments being misplaced.

 - A build fix for amdgpu on Book3E with AltiVec disabled.

Thanks to Andreas Schwab, Christian Zigotzky, and Arnd Bergmann.

* tag 'powerpc-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/32: Select ARCH_SPLIT_ARG64
  powerpc/32: fix syscall wrappers with 64-bit arguments
  asm-generic: compat: fix compat_arg_u64() and compat_arg_u64_dual()
  powerpc/64e: Fix amdgpu build on Book3E w/o AltiVec

Stanislav reported a lockdep warning, which is caused by the
cancel_work_sync() called inside sock_map_close(), as analyzed
below by Jakub:

psock->work.func = sk_psock_backlog()
  ACQUIRE psock->work_mutex
    sk_psock_handle_skb()
      skb_send_sock()
        __skb_send_sock()
          sendpage_unlocked()
            kernel_sendpage()
              sock->ops->sendpage = inet_sendpage()
                sk->sk_prot->sendpage = tcp_sendpage()
                  ACQUIRE sk->sk_lock
                    tcp_sendpage_locked()
                  RELEASE sk->sk_lock
  RELEASE psock->work_mutex

sock_map_close()
  ACQUIRE sk->sk_lock
  sk_psock_stop()
    sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED)
    cancel_work_sync()
      __cancel_work_timer()
        __flush_work()
          // wait for psock->work to finish
  RELEASE sk->sk_lock

We can move the cancel_work_sync() out of the sock lock protection,
but still before saved_close() was called.

Fixes: 799aa7f9 ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20221102043417.279409-1-xiyou.wangcong@gmail.com

With recent sync of linux/in.h tools/include headers are now relying on
__DECLARE_FLEX_ARRAY macro, which isn't itself defined inside
tools/include headers anywhere and is instead assumed to be present in
system-wide UAPI header. This breaks isolated environments that don't
have kernel UAPI headers installed system-wide, like BPF CI ([0]).

To fix this, bring in include/uapi/linux/stddef.h into tools/include.
We can't just copy/paste it, though, it has to be processed with
scripts/headers_install.sh, which has a dependency on scripts/unifdef.
So the full command to (re-)generate stddef.h for inclusion into
tools/include directory is:

  $ make scripts_unifdef && \
    cp $KBUILD_OUTPUT/scripts/unifdef scripts/ && \
    scripts/headers_install.sh include/uapi/linux/stddef.h tools/include/uapi/linux/stddef.h

This assumes KBUILD_OUTPUT envvar is set and used for out-of-tree builds.

  [0] https://github.com/kernel-patches/bpf/actions/runs/3379432493/jobs/5610982609

Fixes: 036b8f5b ("tools headers uapi: Update linux/in.h copy")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20221102182517.2675301-2-andrii@kernel.org

__DECLARE_FLEX_ARRAY is defined in include/uapi/linux/stddef.h but
doesn't seem to be explicitly included from include/uapi/linux/in.h,
which breaks BPF selftests builds (once we sync linux/stddef.h into
tools/include directory in the next patch). Fix this by explicitly
including linux/stddef.h.

Given this affects BPF CI and bpf tree, targeting this for bpf tree.

Fixes: 5854a09b ("net/ipv4: Use __DECLARE_FLEX_ARRAY() helper")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20221102182517.2675301-1-andrii@kernel.org

Dexuan Cui says:

====================
vsock: remove an unused variable and fix infinite sleep

Patch 1 removes the unused 'wait' variable.
Patch 2 fixes an infinite sleep issue reported by a hv_sock user.
====================

Link: https://lore.kernel.org/r/20221101021706.26152-1-decui@microsoft.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Currently vsock_connectible_has_data() may miss a wakeup operation
between vsock_connectible_has_data() == 0 and the prepare_to_wait().

Fix the race by adding the process to the wait queue before checking
vsock_connectible_has_data().

Fixes: b3f7fd54 ("af_vsock: separate wait data loop")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reported-by: Frédéric Dalleau <frederic.dalleau@docker.com>
Tested-by: Frédéric Dalleau <frederic.dalleau@docker.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Remove the unused variable introduced by 19c1b90e.

Fixes: 19c1b90e ("af_vsock: separate receive data loop")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

During the initialization of ip6_route_net_init_late(), if file
ipv6_route or rt6_stats fails to be created, the initialization is
successful by default. Therefore, the ipv6_route or rt6_stats file
doesn't be found during the remove in ip6_route_net_exit_late(). It
will cause WRNING.

The following is the stack information:
name 'rt6_stats'
WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
PKRU: 55555554
Call Trace:
<TASK>
ops_exit_list+0xb0/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>

Fixes: cdb18761 ("[NETNS][IPV6] route6 - create route6 proc files for the namespace")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221102020610.351330-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The following commands should result in all the dynamic FDB entries
being flushed, but instead all the non-local (non-permanent) entries are
flushed:

 # bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static
 # bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic
 # ip link set dev br0 type bridge fdb_flush
 # bridge fdb show brport dummy1
 00:00:00:00:00:01 master br0 permanent
 33:33:00:00:00:01 self permanent
 01:00:5e:00:00:01 self permanent

This is because br_fdb_flush() works with FDB flags and not the
corresponding enumerator values. Fix by passing the FDB flag instead.

After the fix:

 # bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static
 # bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic
 # ip link set dev br0 type bridge fdb_flush
 # bridge fdb show brport dummy1
 00:aa:bb:cc:dd:ee master br0 static
 00:00:00:00:00:01 master br0 permanent
 33:33:00:00:00:01 self permanent
 01:00:5e:00:00:01 self permanent

Fixes: 1f78ee14 ("net: bridge: fdb: add support for fine-grained flushing")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20221101185753.2120691-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When IPv6 module gets initialized but hits an error in the middle,
kenel panic with:

KASAN: null-ptr-deref in range [0x0000000000000598-0x000000000000059f]
CPU: 1 PID: 361 Comm: insmod
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:__neigh_ifdown.isra.0+0x24b/0x370
RSP: 0018:ffff888012677908 EFLAGS: 00000202
...
Call Trace:
 <TASK>
 neigh_table_clear+0x94/0x2d0
 ndisc_cleanup+0x27/0x40 [ipv6]
 inet6_init+0x21c/0x2cb [ipv6]
 do_one_initcall+0xd3/0x4d0
 do_init_module+0x1ae/0x670
...
Kernel panic - not syncing: Fatal exception

When ipv6 initialization fails, it will try to cleanup and calls:

neigh_table_clear()
  neigh_ifdown(tbl, NULL)
    pneigh_queue_purge(&tbl->proxy_queue, dev_net(dev == NULL))
    # dev_net(NULL) triggers null-ptr-deref.

Fix it by passing NULL to pneigh_queue_purge() in neigh_ifdown() if dev
is NULL, to make kernel not panic immediately.

Fixes: 66ba215c ("neigh: fix possible DoS due to net iface start/stop loop")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Link: https://lore.kernel.org/r/20221101121552.21890-1-chenzhongjin@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In smc_init(), register_pernet_subsys(&smc_net_stat_ops) is called
without any error handling.
If it fails, registering of &smc_net_ops won't be reverted.
And if smc_nl_init() fails, &smc_net_stat_ops itself won't be reverted.

This leaves wild ops in subsystem linkedlist and when another module
tries to call register_pernet_operations() it triggers page fault:

BUG: unable to handle page fault for address: fffffbfff81b964c
RIP: 0010:register_pernet_operations+0x1b9/0x5f0
Call Trace:
  <TASK>
  register_pernet_subsys+0x29/0x40
  ebtables_init+0x58/0x1000 [ebtables]
  ...

Fixes: 194730a9 ("net/smc: Make SMC statistics network namespace aware")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20221101093722.127223-1-chenzhongjin@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In current code "plat->mdio_node" is always NULL, the mdio
support is lost as there is no "mdio_bus_data". The original
driver could work as the "mdio" variable is never set to
false, which is described in commit <b0e03950> ("stmmac:
dwmac-loongson: fix uninitialized variable ......"). And
after this commit merged, the "mdio" variable is always
false, causing the mdio supoort logic lost.

Fixes: 30bba69d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221101060218.16453-1-liupeibao@loongson.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Free the rwi structure in the event that the last rwi in the list
processed successfully. The logic in commit 4f408e1f ("ibmvnic:
retry reset if there are no other resets") introduces an issue that
results in a 32 byte memory leak whenever the last rwi in the list
gets processed.

Fixes: 4f408e1f ("ibmvnic: retry reset if there are no other resets")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20221031150642.13356-1-nnac123@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:

UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
 <TASK>
 dump_stack_lvl+0x7d/0xa5
 dump_stack+0x15/0x1b
 ubsan_epilogue+0xe/0x4e
 __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
 __mdiobus_register+0x49d/0x4e0
 fixed_mdio_bus_init+0xd8/0x12d
 do_one_initcall+0x76/0x430
 kernel_init_freeable+0x3b3/0x422
 kernel_init+0x24/0x1e0
 ret_from_fork+0x1f/0x30
 </TASK>

Fixes: 4fd5f812 ("phylib: allow incremental scanning of an mii bus")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221031132645.168421-1-cuigaosheng1@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

1) netlink socket notifier might win race to release objects that are
   already pending to be released via commit release path, reported by
   syzbot.

2) No need to postpone flow rule release to commit release path, this
   triggered the syzbot report, complementary fix to previous patch.

3) Use explicit signed chars in IPVS to unbreak arm, from Jason A. Donenfeld.

4) Missing check for proc entry creation failure in IPVS, from Zhengchao Shao.

5) Incorrect error path handling when BPF NAT fails to register, from
   Chen Zhongjin.

6) Prevent huge memory allocation in ipset hash types, from Jozsef Kadlecsik.

Except the incorrect BPF NAT error path which is broken in 6.1-rc, anything
else has been broken for several releases.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: ipset: enforce documented limit to prevent allocating huge memory
  netfilter: nf_nat: Fix possible memory leak in nf_nat_init()
  ipvs: fix WARNING in ip_vs_app_net_cleanup()
  ipvs: fix WARNING in __ip_vs_cleanup_batch()
  ipvs: use explicitly signed chars
  netfilter: nf_tables: release flow rule object from commit path
  netfilter: nf_tables: netlink notifier might race to release objects
====================

Link: https://lore.kernel.org/r/20221102184659.2502-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Luiz Augusto von Dentz says:

====================
bluetooth 2022-11-02

 - Fix memory leak in hci_vhci driver
 - Fix handling of skb on virtio_bt driver
 - Fix accepting connection for invalid L2CAP PSM
 - Fix attemting to access uninitialized memory
 - Fix use-after-free in l2cap_reassemble_sdu
 - Fix use-after-free in l2cap_conn_del
 - Fix handling of destination address type for CIS
 - Fix not restoring ISO buffer count on disconnect

* tag 'for-net-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: L2CAP: Fix attempting to access uninitialized memory
  Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
  Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
  Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
  Bluetooth: L2CAP: Fix memory leak in vhci_write
  Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
  Bluetooth: virtio_bt: Use skb_put to set length
  Bluetooth: hci_conn: Fix CIS connection dst_type handling
  Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
====================

Link: https://lore.kernel.org/r/20221102235927.3324891-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On l2cap_parse_conf_req the variable efs is only initialized if
remote_efs has been set.

CVE: CVE-2022-42895
CC: stable@vger.kernel.org
Reported-by: Tamás Koczka <poprdi@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>

l2cap_global_chan_by_psm shall not return fixed channels as they are not
meant to be connected by (S)PSM.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>

The Bluetooth spec states that the valid range for SPSM is from
0x0001-0x00ff so it is invalid to accept values outside of this range:

  BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 3, Part A
  page 1059:
  Table 4.15: L2CAP_LE_CREDIT_BASED_CONNECTION_REQ SPSM ranges

CVE: CVE-2022-42896
CC: stable@vger.kernel.org
Reported-by: Tamás Koczka <poprdi@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>

When disconnecting an ISO link the controller may not generate
HCI_EV_NUM_COMP_PKTS for unacked packets which needs to be restored in
hci_conn_del otherwise the host would assume they are still in use and
would not be able to use all the buffers available.

Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Frédéric Danis <frederic.danis@collabora.com>