- 22 Sep, 2021 4 commits
-
-
Ville Syrjälä authored
The intention was to check whether the primary plane is enabled without any sprites planes being enabled. Instead we ended up checking whether just any one of the planes is enabled. g4x isn't vlv/chv and cxsr only works with the primary plane. Fix the check to examine the bitmask of active planes rather than the number of bits set in said bitmask. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210514125751.17075-3-ville.syrjala@linux.intel.comReviewed-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
Be consistent in that active_planes bitmask fits in a u8. Signed-off-by:
-
Ville Syrjälä authored
intel_plane_atomic_calc_changes() deals with both the old and new crtc/plane states. Make the variable names reflect that more clearly. Signed-off-by:
-
Tejas Upadhyay authored
Add helper function with returns if HDR mode in on Signed-off-by:
Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210907113658.1351456-1-tejaskumarx.surendrakumar.upadhyay@intel.com [vsyrjala: fix up alignment to match codingstyle] Signed-off-by:
-
- 20 Sep, 2021 12 commits
-
-
Jani Nikula authored
There's a new register pair for 128b/132b mode where you need to set the pixel clock in Hz. v2: Fix UHBR rate check, use intel_dp_is_uhbr() helper Bspec: 54128 Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a2902cc188973f022f282f2a77e693afdecefb5a.1631191763.git.jani.nikula@intel.com
-
Jani Nikula authored
128b/132b has a separate transcoder DDI mode, which also requires the MST transport select to be set. Note that we'll use DP MST also for single-stream 128b/132b. Having the FDI and 128b/132b modes share the register mode value complicates things a bit. v2: - Use HAS_DP20 abstraction for 128b/132b mode (Ville) - Use intel_dp_is_uhbr() helper Bspec: 50493 Reviewed-by:
-
Jani Nikula authored
Let's abstract the DP 2.0 feature. Initially just DG2. Reviewed-by:
-
Jani Nikula authored
Set the DP 2.0 128b/132b channel encoding for UHBR rates. v2: Fix UHBR port clock check, use intel_dp_is_uhbr() Bspec: 54128 Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Jani Nikula authored
UHBR rates and 128b/132b channel encoding go hand in hand. v2: Fix check for >= UHBR rates using intel_dp_is_uhbr() (Ville) Reviewed-by:
-
Jani Nikula authored
128b/132b channel encoding has separate TPS1 and TPS2, although the DPCD register values coincide with 8b/10b TPS1 and TPS2 values. Use 128b/132b TPS2 for channel equalization. v2: Use intel_dp_is_uhbr Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> # v1 Signed-off-by:
-
Jani Nikula authored
Helpful abstraction to avoid duplication. Reviewed-by:
-
Jani Nikula authored
Unfortunately, the DP 2.0 128b/132b DDI mode selection in the register conflicts with FDI. Since we have to deal with both meanings in the same code, for different platforms, clarify the macro name so we don't forget. Bspec: 50493 Reviewed-by:
-
Jani Nikula authored
The DP 2.0 128b/132b channel coding uses TX FFE presets instead of vswing and pre-emphasis. Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
-
Jani Nikula authored
DP 2.0 brings some new DPCD addresses for PHY repeaters. Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
Jani Nikula authored
Extend the use of extended receiver cap at 0x2200 to cover MAIN_LINK_CHANNEL_CODING_CAP in 0x2206, in case an implementation hides the DP 2.0 128b/132b channel encoding cap. v2: Extend to DP_RECEIVER_CAP_SIZE (Ville) Cc: Lyude Paul <lyude@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Acked-by:
-
Jani Nikula authored
The bw code equals link_rate / 0.27 Gbps only for 8b/10b link rates. Handle DP 2.0 UHBR rates as special cases, though this is not pretty. Cc: dri-devel@lists.freedesktop.org Reviewed-by:
-
- 17 Sep, 2021 6 commits
-
-
José Roberto de Souza authored
Wa_16014451276 fixes the starting coordinate for PSR2 selective updates. CHICKEN_TRANS definition of the workaround bit has a wrong name based on workaround definition and HSD. Wa_14014971508 allows the screen to continue to be updated when coming back from DC5/DC6 and SF_SINGLE_FULL_FRAME bit is not kept set in PSR2_MAN_TRK_CTL. Wa_16012604467 fixes underruns when exiting PSR2 when it is in one of its internal states. Wa_14014971508 is still in pending status in BSpec but by the time this is reviewed and ready to be merged it will be finalized. v2: - renamed register to ADLP_1_BASED_X_GRANULARITY - added comment about all ADL-P supported panels being 1 based X granularity BSpec: 54369 BSpec: 50054 Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210914212507.177511-5-jose.souza@intel.com
-
José Roberto de Souza authored
drm_atomic_helper_damage_iter_init() + drm_atomic_for_each_plane_damage() returns the full plane area in case no damaged area was set by userspace or it was discarted by driver. This is important to fix the rendering of userspace applications that does frontbuffer rendering and notify driver about dirty areas but do not set any dirty clips. With this we don't need to worry about to check and mark the whole area as damaged in page flips. Another important change here is the move of drm_atomic_add_affected_planes() call, it needs to called late otherwise the area of all the planes would be added to pipe_clip and not saving power. Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by:
-
José Roberto de Souza authored
Not sure why but when moving the cursor fast it causes some artifacts of the cursor to be left in the cursor path, adding some pixels above the cursor to the damaged area fixes the issue, so leaving this as a workaround until proper fix is found. This is reproducile on TGL and ADL-P. Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Reviewed-by:
-
José Roberto de Souza authored
BSpec states that the minimum number of frames before selective update is 2, so making sure this minimum limit is fulfilled. BSpec: 50422 Reviewed-by:
-
José Roberto de Souza authored
As the SU_REGION_START begins at 0, the SU_REGION_END should be number of lines - 1. BSpec: 50424 Reviewed-by:
-
Anusha Srivatsa authored
The release notes mentions that this version- 1. Fix for unblock indication to punit. 2. Robustness fix for DC6/6v abort scenarios. Cc: Imre Deak <Imre Deak <imre.deak@intel.com>> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
- 16 Sep, 2021 1 commit
-
-
Chris Wilson authored
Free all the DMC payloads, not just DMC_MAIN. unreferenced object 0xffff88ff32d4d800 (size 1024): comm "kworker/1:5", pid 701, jiffies 4294904239 (age 109.736s) hex dump (first 32 bytes): 40 40 00 0c 03 00 00 00 00 00 00 00 00 00 00 00 @@.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000ba9d0d95>] dmc_load_work_fn+0x34d/0x510 [i915] [<000000001049fcab>] process_one_work+0x261/0x550 [<00000000eeb995ac>] worker_thread+0x49/0x3c0 [<0000000021031dc3>] kthread+0x10b/0x140 [<000000004a0f69ee>] ret_from_fork+0x1f/0x30 unreferenced object 0xffff88ff0bde4000 (size 1024): comm "kworker/0:3", pid 708, jiffies 4294904469 (age 108.816s) hex dump (first 32 bytes): 40 40 00 0c 01 00 00 00 00 00 00 00 00 00 00 00 @@.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000ba9d0d95>] dmc_load_work_fn+0x34d/0x510 [i915] [<000000001049fcab>] process_one_work+0x261/0x550 [<00000000eeb995ac>] worker_thread+0x49/0x3c0 [<0000000021031dc3>] kthread+0x10b/0x140 [<000000004a0f69ee>] ret_from_fork+0x1f/0x30 Fixes: 3d5928a1 ("drm/i915/xelpd: Pipe A DMC plugging") Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
- 15 Sep, 2021 8 commits
-
-
Radhakrishna Sripada authored
Earlier while calculating derated bw we would use 90% of the calculated bw. Starting ADL-P we use a non standard derating. Updating the formulae to reflect the same. Bspec: 64631 v2: Use the new derating value only for ADL-P(MattR) Fixes: 4d32fe2f ("drm/i915/adl_p: Update memory bandwidth parameters") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Extract the "panel transcoder" bitmask into a helper. We'll have a couple of uses for this later. Signed-off-by:
-
Ville Syrjälä authored
Pass the crtc+cpu_transcoder rather than the crtc state to intel_dsc_power_domain(). This should allow us to reuse it during readout as well. Signed-off-by:
-
Ville Syrjälä authored
Add the _if_enabled() counterpart to with_intel_display_power(). Signed-off-by:
-
Ville Syrjälä authored
PIPECONF becamse TRANSCONF when HSW introduced the EDP transcoder. Bigjoiner is making life even more confusing by introducing a N:1 relationship between pipes and transcoders. In that case we only enable/configure the transcoder corresponding to the master pipe. Let's do some renames to make it clear we're dealing with the transcoder rather than pipe when it comes to PIPECONF/TRANSCONF. I decided to leave the _cpu_ part out from the function/macro names since the PCH transcoder related stuff already has a _pch_ in their name. So shouldn't be possible to confuse them. Signed-off-by:
-
Ville Syrjälä authored
hsw_crtc_compute_clock() has become spaghetti. Flatten it a bit to make it at least semi-legible. Signed-off-by:
-
Ville Syrjälä authored
Suck the "do we need bigjoiner?" checks into a helper instead of duplicating them in two differentt places. v2: s/use/need/ (Jani) Signed-off-by:
-
Rodrigo Vivi authored
Catch-up on 5.15-rc1 and sync with drm-intel-gt-next to prepare the PXP topic branch. Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com>
-
- 14 Sep, 2021 7 commits
-
-
José Roberto de Souza authored
New DG1 PCI id. BSpec: 44463 Cc: Caz Yokoyama <caz.yokoyama@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Jani Nikula authored
Now that we have MSO pixel overlap in display info, use it. Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Jani Nikula authored
MSO will require segment pixel overlap information from the EDID. Postpone MSO init until after we've read and cached the EDID. Reviewed-by:
-
Jani Nikula authored
The VESA Organization Vendor-Specific Data Block, defined in VESA DisplayID Standard v2.0, specifies the eDP Multi-SST Operation (MSO) stream count and segment pixel overlap. DisplayID v1.3 has Appendix B: DisplayID as an EDID Extension, describing how DisplayID sections may be embedded in EDID extension blocks. DisplayID v2.0 does not have such a section, perhaps implying that DisplayID v2.0 data should not be included in EDID extensions, but rather in a "pure" DisplayID structure at its own DDC address pair A4h/A5h, as described in VESA E-DDC Standard v1.3 chapter 3. However, in practice, displays out in the field have embedded DisplayID v2.0 data blocks in EDID extensions, including, in particular, some eDP MSO displays, where a pure DisplayID structure is not available at all. Parse the MSO data from the DisplayID data block. Do it as part of drm_add_display_info(), extending it to parse also DisplayID data to avoid requiring extra calls to update the information. v2: Check for VESA OUI (Ville) Reviewed-by:
Maxime Ripard <maxime@cerno.tech> Signed-off-by:
-
Jani Nikula authored
Replace the open coded OUI conversion from three bytes to a 24-bit int, as we'll be adding one more user shortly. No functional changes. Side note: CTA-861 format has the OUI bytes in reverse order. Reviewed-by:
-
Jani Nikula authored
DisplayID v2.0 changes the data block identifiers and product types (now called primary use cases). Reviewed-by:
-
Jani Nikula authored
Make the values easier to read. Also add DisplayID Structure version and revision information (this is different from the spec version). Reviewed-by:
-
- 12 Sep, 2021 2 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Add missing fields and remove some duplicate fields when printing a perf_event_attr. - Fix hybrid config terms list corruption. - Update kernel header copies, some resulted in new kernel features being automagically added to 'perf trace' syscall/tracepoint argument id->string translators. - Add a file generated during the documentation build to .gitignore. - Add an option to build without libbfd, as some distros, like Debian consider its ABI unstable. - Add support to print a textual representation of IBS raw sample data in 'perf report'. - Fix bpf 'perf test' sample mismatch reporting - Fix passing arguments to stackcollapse report in a 'perf script' python script. - Allow build-id with trailing zeros. - Look for ImageBase in PE file to compute .text offset. * tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits) tools headers UAPI: Update tools's copy of drm.h headers tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/fs.h with the kernel sources tools headers UAPI: Sync linux/in.h copy with the kernel sources perf tools: Add an option to build without libbfd perf tools: Allow build-id with trailing zeros perf tools: Fix hybrid config terms list corruption perf tools: Factor out copy_config_terms() and free_config_terms() perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields perf tools: Ignore Documentation dependency file perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions tools include UAPI: Update linux/mount.h copy perf beauty: Cover more flags in the move_mount syscall argument beautifier tools headers UAPI: Sync linux/prctl.h with the kernel sources tools include UAPI: Sync sound/asound.h copy with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources perf report: Add support to print a textual representation of IBS raw sample data perf report: Add tools/arch/x86/include/asm/amd-ibs.h perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings ...
-
