- 26 Sep, 2019 40 commits
-
-
Thomas Bogendoerfer authored
BugLink: https://bugs.launchpad.net/bugs/1845036 [ Upstream commit a07e3324 ] i8253 clocksource needs a free running timer. This could only be used, if i8253 clockevent is set up as periodic. Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Connor Kuehl <connor.kuehl@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Ilya Trukhanov authored
BugLink: https://bugs.launchpad.net/bugs/1845036 [ Upstream commit 65f11c72 ] Enable force feedback for the Thrustmaster Dual Trigger 2 in 1 Rumble Force gamepad. Compared to other Thrustmaster devices, left and right rumble motors here are swapped. Signed-off-by:
Ilya Trukhanov <lahvuun@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1845038Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit d595b03d ] As commit 30d8177e ("bonding: Always enable vlan tx offload") said, we should always enable bonding's vlan tx offload, pass the vlan packets to the slave devices with vlan tci, let them to handle vlan implementation. Now if encapsulation protocols like VXLAN is used, skb->encapsulation may be set, then the packet is passed to vlan device which based on bonding device. However in netif_skb_features(), the check of hw_enc_features: if (skb->encapsulation) features &= dev->hw_enc_features; clears NETIF_F_HW_VLAN_CTAG_TX/NETIF_F_HW_VLAN_STAG_TX. This results in same issue in commit 30d8177e like this: vlan_dev_hard_start_xmit -->dev_queue_xmit -->validate_xmit_skb -->netif_skb_features //NETIF_F_HW_VLAN_CTAG_TX is cleared -->validate_xmit_vlan -->__vlan_hwaccel_push_inside //skb->tci is cleared ... --> bond_start_xmit --> bond_xmit_hash //BOND_XMIT_POLICY_ENCAP34 --> __skb_flow_dissect // nhoff point to IP header --> case htons(ETH_P_8021Q) // skb_vlan_tag_present is false, so vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan), //vlan point to ip header wrongly Fixes: b2a103e6 ("bonding: convert to ndo_fix_features") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit a1794de8 ] As the annotation says in sctp_do_8_2_transport_strike(): "If the transport error count is greater than the pf_retrans threshold, and less than pathmaxrtx ..." It should be transport->error_count checked with pathmaxrxt, instead of asoc->pf_retrans. Fixes: 5aa93bcf ("sctp: Implement quick failover draft from tsvwg") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Huy Nguyen authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit 466df6eb ] Only support changing tx/rx pause frame setting if the net device is the vport group manager. Fixes: 3c2d18ef ("net/mlx5e: Support ethtool get/set_pauseparam") Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Ross Lagerwall authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit 3a0233dd ] At this point nr_frags has been incremented but the frag does not yet have a page assigned so freeing the skb results in a crash. Reset nr_frags before freeing the skb to prevent this. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit 32d3182c ] packet_sendmsg() checks tx_ring.pg_vec to decide if it must call tpacket_snd(). Problem is that the check is lockless, meaning another thread can issue a concurrent setsockopt(PACKET_TX_RING ) to flip tx_ring.pg_vec back to NULL. Given that tpacket_snd() grabs pg_vec_lock mutex, we can perform the check again to solve the race. syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 11429 Comm: syz-executor394 Not tainted 5.3.0-rc4+ #101 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:packet_lookup_frame+0x8d/0x270 net/packet/af_packet.c:474 Code: c1 ee 03 f7 73 0c 80 3c 0e 00 0f 85 cb 01 00 00 48 8b 0b 89 c0 4c 8d 24 c1 48 b8 00 00 00 00 00 fc ff df 4c 89 e1 48 c1 e9 03 <80> 3c 01 00 0f 85 94 01 00 00 48 8d 7b 10 4d 8b 3c 24 48 b8 00 00 RSP: 0018:ffff88809f82f7b8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff8880a45c7030 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffff110148b8e06 RDI: ffff8880a45c703c RBP: ffff88809f82f7e8 R08: ffff888087aea200 R09: fffffbfff134ae50 R10: fffffbfff134ae4f R11: ffffffff89a5727f R12: 0000000000000000 R13: 0000000000000001 R14: ffff8880a45c6ac0 R15: 0000000000000000 FS: 00007fa04716f700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa04716edb8 CR3: 0000000091eb4000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: packet_current_frame net/packet/af_packet.c:487 [inline] tpacket_snd net/packet/af_packet.c:2667 [inline] packet_sendmsg+0x590/0x6250 net/packet/af_packet.c:2975 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 69e3c75f ("net: TX_RING and packet mmap") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Matthias Kaehlcke authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 20c6c189 upstream. The clang warning 'address-of-packed-member' is disabled for the general kernel code, also disable it for the x86 boot code. This suppresses a bunch of warnings like this when building with clang: ./arch/x86/include/asm/processor.h:535:30: warning: taking address of packed member 'sp0' of class or structure 'x86_hw_tss' may result in an unaligned pointer value [-Waddress-of-packed-member] return this_cpu_read_stable(cpu_tss.x86_tss.sp0); ^~~~~~~~~~~~~~~~~~~ ./arch/x86/include/asm/percpu.h:391:59: note: expanded from macro 'this_cpu_read_stable' #define this_cpu_read_stable(var) percpu_stable_op("mov", var) ^~~ ./arch/x86/include/asm/percpu.h:228:16: note: expanded from macro 'percpu_stable_op' : "p" (&(var))); ^~~ Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Cc: Doug Anderson <dianders@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170725215053.135586-1-mka@chromium.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Joerg Roedel authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 24d2c521 upstream. The function is only called from another __init function, so it should be moved to .init too. Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Andy Lutomirski authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 1ed95e52 upstream. Allowing user code to map the HPET is problematic. HPET implementations are notoriously buggy, and there are probably many machines on which even MMIO reads from bogus HPET addresses are problematic. We have a report that the Dell Precision M2800 with: ACPI: HPET 0x00000000C8FE6238 000038 (v01 DELL CBX3 01072009 AMI. 00000005) is either so slow when accessing the HPET or actually hangs in some regard, causing soft lockups to be reported if users do unexpected things to the HPET. The vclock HPET code has also always been a questionable speedup. Accessing an HPET is exceedingly slow (on the order of several microseconds), so the added overhead in requiring a syscall to read the HPET is a small fraction of the total code of accessing it. To avoid future problems, let's just delete the code entirely. In the long run, this could actually be a speedup. Waiman Long as a patch to optimize the case where multiple CPUs contend for the HPET, but that won't help unless all the accesses are mediated by the kernel. Reported-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Waiman Long <Waiman.Long@hpe.com> Cc: Waiman Long <waiman.long@hpe.com> Link: http://lkml.kernel.org/r/d2f90bba98db9905041cff294646d290d378f67a.1460074438.git.luto@kernel.orgSigned-off-by:
-
Doug Ledford authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 0025b0bd upstream. These three related functions can't agree whether to put the umrwr on the stack dirty and then memset it, or to initialize it on the stack. Make them all agree. Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Jason Gunthorpe authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 641114d2 upstream. gcc 9 now does allocation size tracking and thinks that passing the member of a union and then accessing beyond that member's bounds is an overflow. Instead of using the union member, use the entire union with a cast to get to the sockaddr. gcc will now know that the memory extends the full size of the union. Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Hannes Reinecke authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 023358b1 upstream. Gcc-9 complains for a memset across pointer boundaries, which happens as the code tries to allocate a flexible array on the stack. Turns out we cannot do this without relying on gcc-isms, so with this patch we'll embed the fc_rport_priv structure into fcoe_rport, can use the normal 'container_of' outcast, and will only have to do a memset over one structure. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 3c047057 upstream. When CONFIG_BUG is disabled, BUG_ON() will only evaluate the condition, but will not actually stop the current thread. GCC warns about a couple of BUG_ON() users where this actually leads to further undefined behavior: include/linux/ceph/osdmap.h: In function 'ceph_can_shift_osds': include/linux/ceph/osdmap.h:54:1: warning: control reaches end of non-void function fs/ext4/inode.c: In function 'ext4_map_blocks': fs/ext4/inode.c:548:5: warning: 'retval' may be used uninitialized in this function drivers/mfd/db8500-prcmu.c: In function 'prcmu_config_clkout': drivers/mfd/db8500-prcmu.c:762:10: warning: 'div_mask' may be used uninitialized in this function drivers/mfd/db8500-prcmu.c:769:13: warning: 'mask' may be used uninitialized in this function drivers/mfd/db8500-prcmu.c:757:7: warning: 'bits' may be used uninitialized in this function drivers/tty/serial/8250/8250_core.c: In function 'univ8250_release_irq': drivers/tty/serial/8250/8250_core.c:252:18: warning: 'i' may be used uninitialized in this function drivers/tty/serial/8250/8250_core.c:235:19: note: 'i' was declared here There is an obvious conflict of interest here: on the one hand, someone who disables CONFIG_BUG() will want the kernel to be as small as possible and doesn't care about printing error messages to a console that nobody looks at. On the other hand, running into a BUG_ON() condition means that something has gone wrong, and we probably want to also stop doing things that might cause data corruption. This patch picks the second choice, and changes the NOP to BUG(), which normally stops the execution of the current thread in some form (endless loop or a trap). This follows the logic we applied in a4b5d580 ("bug: Make BUG() always stop the machine"). For ARM multi_v7_defconfig, the size slightly increases: section CONFIG_BUG=y CONFIG_BUG=n CONFIG_BUG=n+patch .text 8320248 | 8180944 | 8207688 .rodata 3633720 | 3567144 | 3570648 __bug_table 32508 | --- | --- __modver 692 | 1584 | 2176 .init.text 558132 | 548300 | 550088 .exit.text 12380 | 12256 | 12380 .data 1016672 | 1016064 | 1016128 Total 14622556 | 14374510 | 14407326 So instead of saving 1.70% of the total image size, we only save 1.48% by turning off CONFIG_BUG, but in return we can ensure that we don't run into cases of uninitialized variable or return code uses when something bad happens. Aside from that, we significantly reduce the number of warnings in randconfig builds, which makes it easier to fix the warnings about other problems. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 49e6979e upstream. trackpoint_detect() should be static inline while CONFIG_MOUSE_PS2_TRACKPOINT is not set, otherwise, we build fails: drivers/input/mouse/alps.o: In function `trackpoint_detect': alps.c:(.text+0x8e00): multiple definition of `trackpoint_detect' drivers/input/mouse/psmouse-base.o:psmouse-base.c:(.text+0x1b50): first defined here Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: 55e3d922 ("Input: psmouse - allow disabing certain protocol extensions") Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Will Deacon authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 849adec4 upstream. Commit d968d2b8 ("ARM: 7497/1: hw_breakpoint: allow single-byte watchpoints on all addresses") changed the validation requirements for hardware watchpoints on arch/arm/. Update our compat layer to implement the same relaxation. Cc: <stable@vger.kernel.org> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Miguel Ojeda authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit a6e60d84 ] The upcoming GCC 9 release extends the -Wmissing-attributes warnings (enabled by -Wall) to C and aliases: it warns when particular function attributes are missing in the aliases but not in their target. In particular, it triggers for all the init/cleanup_module aliases in the kernel (defined by the module_init/exit macros), ending up being very noisy. These aliases point to the __init/__exit functions of a module, which are defined as __cold (among other attributes). However, the aliases themselves do not have the __cold attribute. Since the compiler behaves differently when compiling a __cold function as well as when compiling paths leading to calls to __cold functions, the warning is trying to point out the possibly-forgotten attribute in the alias. In order to keep the warning enabled, we decided to silence this case. Ideally, we would mark the aliases directly as __init/__exit. However, there are currently around 132 modules in the kernel which are missing __init/__exit in their init/cleanup functions (either because they are missing, or for other reasons, e.g. the functions being called from somewhere else); and a section mismatch is a hard error. A conservative alternative was to mark the aliases as __cold only. However, since we would like to eventually enforce __init/__exit to be always marked, we chose to use the new __copy function attribute (introduced by GCC 9 as well to deal with this). With it, we copy the attributes used by the target functions into the aliases. This way, functions that were not marked as __init/__exit won't have their aliases marked either, and therefore there won't be a section mismatch. Note that the warning would go away marking either the extern declaration, the definition, or both. However, we only mark the definition of the alias, since we do not want callers (which only see the declaration) to be compiled as if the function was __cold (and therefore the paths leading to those calls would be assumed to be unlikely). Link: https://lore.kernel.org/lkml/20190123173707.GA16603@gmail.com/ Link: https://lore.kernel.org/lkml/20190206175627.GA20399@gmail.com/Suggested-by:
Martin Sebor <msebor@gcc.gnu.org> Acked-by:
Jessica Yu <jeyu@kernel.org> Signed-off-by:
Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> Signed-off-by:
-
Miguel Ojeda authored
BugLink: https://bugs.launchpad.net/bugs/1845038 This adds support for __copy to v4.9.y so that we can use it in init/exit_module to avoid -Werror=missing-attributes errors on GCC 9. Link: https://lore.kernel.org/lkml/259986242.BvXPX32bHu@devpool35/ Cc: <stable@vger.kernel.org> Suggested-by:
Rolf Eike Beer <eb@emlix.com> Signed-off-by:
-
Tony Lindgren authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 6caf0be4 upstream. On Motorola Mapphone devices such as Droid 4 there are five USB ports that do not use the same layout as Gobi 1K/2K/etc devices listed in qcserial.c. So we should use qcaux.c or option.c as noted by Dan Williams <dan.j.williams@intel.com>. As the Motorola USB serial ports have an interrupt endpoint as shown with lsusb -v, we should use option.c instead of qcaux.c as pointed out by Johan Hovold <johan@kernel.org>. The ff/ff/ff interfaces seem to always be UARTs on Motorola devices. For the other interfaces, class 0x0a (CDC Data) should not in general be added as they are typically part of a multi-interface function as noted earlier by Bjørn Mork <bjorn@mork.no>. However, looking at the Motorola mapphone kernel code, the mdm6600 0x0a class is only used for flashing the modem firmware, and there are no other interfaces. So I've added that too with more details below as it works just fine. The ttyUSB ports on Droid 4 are: ttyUSB0 DIAG, CQDM-capable ttyUSB1 MUX or NMEA, no response ttyUSB2 MUX or NMEA, no response ttyUSB3 TCMD ttyUSB4 AT-capable The ttyUSB0 is detected as QCDM capable by ModemManager. I think it's only used for debugging with ModemManager --debug for sending custom AT commands though. ModemManager already can manage data connection using the USB QMI ports that are already handled by the qmi_wwan.c driver. To enable the MUX or NMEA ports, it seems that something needs to be done additionally to enable them, maybe via the DIAG or TCMD port. It might be just a NVRAM setting somewhere, but I have no idea what NVRAM settings may need changing for that. The TCMD port seems to be a Motorola custom protocol for testing the modem and to configure it's NVRAM and seems to work just fine based on a quick test with a minimal tcmdrw tool I wrote. The voice modem AT-capable port seems to provide only partial support, and no PM support compared to the TS 27.010 based UART wired directly to the modem. The UARTs added with this change are the same product IDs as the Motorola Mapphone Android Linux kernel mdm6600_id_table. I don't have any mdm9600 based devices, so I have only tested these on mdm6600 based droid 4. Then for the class 0x0a (CDC Data) mode, the Motorola Mapphone Android Linux kernel driver moto_flashqsc.c just seems to change the port->bulk_out_size to 8K from the default. And is only used for flashing the modem firmware it seems. I've verified that flashing the modem with signed firmware works just fine with the option driver after manually toggling the GPIO pins, so I've added droid 4 modem flashing mode to the option driver. I've not added the other devices listed in moto_flashqsc.c in case they really need different port->bulk_out_size. Those can be added as they get tested to work for flashing the modem. After this patch the output of /sys/kernel/debug/usb/devices has the following for normal 22b8:2a70 mode including the related qmi_wwan interfaces: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22b8 ProdID=2a70 Rev= 0.00 S: Manufacturer=Motorola, Incorporated S: Product=Flash MZ600 C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=88(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=8b(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=8c(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan E: Ad=8d(I) Atr=03(Int.) MxPS= 64 Ivl=5ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms In 22b8:900e "qc_dload" mode the device shows up as: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22b8 ProdID=900e Rev= 0.00 S: Manufacturer=Motorola, Incorporated S: Product=Flash MZ600 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms And in 22b8:4281 "ram_downloader" mode the device shows up as: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22b8 ProdID=4281 Rev= 0.00 S: Manufacturer=Motorola, Incorporated S: Product=Flash MZ600 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=fc Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Cc: Bjørn Mork <bjorn@mork.no> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Lars Melin <larsm17@gmail.com> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Tested-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Tony Lindgren <tony@atomide.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Bob Ham authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit e5d8badf upstream. Add a VID:PID for the BroadMobi BM818 M.2 card T: Bus=01 Lev=03 Prnt=40 Port=03 Cnt=01 Dev#= 44 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2060 Rev=00.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by:
Bob Ham <bob.ham@puri.sm> Signed-off-by:
Angus Ainslie (Purism) <angus@akkea.ca> Cc: stable <stable@vger.kernel.org> [ johan: use USB_DEVICE_INTERFACE_CLASS() ] Signed-off-by:
-
Yoshiaki Okamoto authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 7e7ae38b upstream. This patch adds support for MF871A USB modem (aka Speed USB STICK U03) to option driver. This modem is manufactured by ZTE corporation, and sold by KDDI. Interface layout: 0: AT 1: MODEM usb-devices output: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1481 Rev=52.87 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=1234567890ABCDEF C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option Co-developed-by:
Hiroyuki Yamamoto <hyamamo@allied-telesis.co.jp> Signed-off-by:
Yoshiaki Okamoto <yokamoto@allied-telesis.co.jp> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Rogan Dawes authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 552573e4 upstream. Add device id for D-Link DWM-222 A2. MI_00 D-Link HS-USB Diagnostics MI_01 D-Link HS-USB Modem MI_02 D-Link HS-USB AT Port MI_03 D-Link HS-USB NMEA MI_04 D-Link HS-USB WWAN Adapter (qmi_wwan) MI_05 USB Mass Storage Device Cc: stable@vger.kernel.org Signed-off-by:
Rogan Dawes <rogan@dawes.za.net> Signed-off-by:
-
Oliver Neukum authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit c52873e5 upstream. destroy() will decrement the refcount on the interface, so that it needs to be taken so early that it never undercounts. Fixes: 7fb57a01 ("USB: cdc-acm: Fix potential deadlock (lockdep warning)") Cc: stable <stable@vger.kernel.org> Reported-and-tested-by: syzbot+1b2449b7b5dc240d107a@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20190808142119.7998-1-oneukum@suse.comSigned-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 303911cf upstream. The syzbot fuzzer has found two (!) races in the USB character device registration and deregistration routines. This patch fixes the races. The first race results from the fact that usb_deregister_dev() sets usb_minors[intf->minor] to NULL before calling device_destroy() on the class device. This leaves a window during which another thread can allocate the same minor number but will encounter a duplicate name error when it tries to register its own class device. A typical error message in the system log would look like: sysfs: cannot create duplicate filename '/class/usbmisc/ldusb0' The patch fixes this race by destroying the class device first. The second race is in usb_register_dev(). When that routine runs, it first allocates a minor number, then drops minor_rwsem, and then creates the class device. If the device creation fails, the minor number is deallocated and the whole routine returns an error. But during the time while minor_rwsem was dropped, there is a window in which the minor number is allocated and so another thread can successfully open the device file. Typically this results in use-after-free errors or invalid accesses when the other thread closes its open file reference, because the kernel then tries to release resources that were already deallocated when usb_register_dev() failed. The patch fixes this race by keeping minor_rwsem locked throughout the entire routine. Reported-and-tested-by: syzbot+30cf45ebfe0b0c4847a1@syzkaller.appspotmail.com Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1908121607590.1659-100000@iolanthe.rowland.orgSigned-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 8e2a589a upstream. `dt3k_ns_to_timer()` determines the prescaler and divisor to use to produce a desired timing period. It is influenced by a rounding mode and can round the divisor up, down, or to the nearest value. However, the code for rounding up currently does the same as rounding down! Fix ir by using the `DIV_ROUND_UP()` macro to calculate the divisor when rounding up. Also, change the types of the `divider`, `base` and `prescale` variables from `int` to `unsigned int` to avoid mixing signed and unsigned types in the calculations. Also fix a typo in a nearby comment: "improvment" => "improvement". Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190812120814.21188-1-abbotti@mev.co.ukSigned-off-by:
-
Ian Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit b4d98bc3 upstream. In `dt3k_ns_to_timer()` the following lines near the end of the function result in a signed integer overflow: prescale = 15; base = timer_base * (1 << prescale); divider = 65535; *nanosec = divider * base; (`divider`, `base` and `prescale` are type `int`, `timer_base` and `*nanosec` are type `unsigned int`. The value of `timer_base` will be either 50 or 100.) The main reason for the overflow is that the calculation for `base` is completely wrong. It should be: base = timer_base * (prescale + 1); which matches an earlier instance of this calculation in the same function. Reported-by:
David Binderman <dcb314@hotmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Connor Kuehl authored
https://bugs.launchpad.net/bugs/1845038 Commit "asm-generic: fix -Wtype-limits compiler warnings" causes an inline change which results in a retpoline sequence replacement. Ignore: yes Signed-off-by:
-
Qian Cai authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit cbedfe11 ] Commit d66acc39 ("bitops: Optimise get_order()") introduced a compilation warning because "rx_frag_size" is an "ushort" while PAGE_SHIFT here is 16. The commit changed the get_order() to be a multi-line macro where compilers insist to check all statements in the macro even when __builtin_constant_p(rx_frag_size) will return false as "rx_frag_size" is a module parameter. In file included from ./arch/powerpc/include/asm/page_64.h:107, from ./arch/powerpc/include/asm/page.h:242, from ./arch/powerpc/include/asm/mmu.h:132, from ./arch/powerpc/include/asm/lppaca.h:47, from ./arch/powerpc/include/asm/paca.h:17, from ./arch/powerpc/include/asm/current.h:13, from ./include/linux/thread_info.h:21, from ./arch/powerpc/include/asm/processor.h:39, from ./include/linux/prefetch.h:15, from drivers/net/ethernet/emulex/benet/be_main.c:14: drivers/net/ethernet/emulex/benet/be_main.c: In function 'be_rx_cqs_create': ./include/asm-generic/getorder.h:54:9: warning: comparison is always true due to limited range of data type [-Wtype-limits] (((n) < (1UL << PAGE_SHIFT)) ? 0 : \ ^ drivers/net/ethernet/emulex/benet/be_main.c:3138:33: note: in expansion of macro 'get_order' adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE; ^~~~~~~~~ Fix it by moving all of this multi-line macro into a proper function, and killing __get_order() off. [akpm@linux-foundation.org: remove __get_order() altogether] [cai@lca.pw: v2] Link: http://lkml.kernel.org/r/1564000166-31428-1-git-send-email-cai@lca.pw Link: http://lkml.kernel.org/r/1563914986-26502-1-git-send-email-cai@lca.pw Fixes: d66acc39 ("bitops: Optimise get_order()") Signed-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Howells <dhowells@redhat.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: James Y Knight <jyknight@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit 7bc36e3c ] Fixes gcc '-Wunused-but-set-variable' warning: fs/ocfs2/xattr.c: In function ocfs2_xattr_bucket_find: fs/ocfs2/xattr.c:3828:6: warning: variable last_hash set but not used [-Wunused-but-set-variable] It's never used and can be removed. Link: http://lkml.kernel.org/r/20190716132110.34836-1-yuehaibing@huawei.comSigned-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Luck, Tony authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit 61f25982 ] Some processors may mispredict an array bounds check and speculatively access memory that they should not. With a user supplied array index we like to play things safe by masking the value with the array size before it is used as an index. Signed-off-by:
Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/r/20190731043957.GA1600@agluck-desk2.amr.corp.intel.comSigned-off-by:
-
Masahiro Yamada authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit cb481993 ] KBUILD_EXTRA_SYMBOLS makes sense only when building external modules. Moreover, the modpost sets 'external_module' if the -e option is given. I replaced $(patsubst %, -e %,...) with simpler $(addprefix -e,...) while I was here. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Miquel Raynal authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit 090bb803 ] Retrieving PHYs can defer the probe, do not spawn an error when -EPROBE_DEFER is returned, it is normal behavior. Fixes: b1a9edbd ("ata: libahci: allow to use multiple PHYs") Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Don Brace authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit eeebce18 ] Reviewed-by:
Bader Ali - Saleh <bader.alisaleh@microsemi.com> Reviewed-by:
Scott Teel <scott.teel@microsemi.com> Reviewed-by:
Scott Benesh <scott.benesh@microsemi.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Kees Cook authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit 71d6c505 ] Jeffrin reported a KASAN issue: BUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70 Read of size 16 at addr ffffffff91f41f80 by task scsi_eh_1/149 ... The buggy address belongs to the variable: cdb.48319+0x0/0x40 Much like commit 18c9a99b ("libata: zpodd: small read overflow in eject_tray()"), this fixes a cdb[] buffer length, this time in zpodd_get_mech_type(): We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes. Reported-by:
Jeffrin Jose T <jeffrin@rajagiritech.edu.in> Fixes: afe75951 ("libata: identify and init ZPODD devices") Link: https://lore.kernel.org/lkml/201907181423.E808958@keescook/Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Numfor Mbiziwo-Tiapo authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit 20f9781f ] When building our local version of perf with MSAN (Memory Sanitizer) and running the perf record command, MSAN throws a use of uninitialized value warning in "tools/perf/util/util.c:333:6". This warning stems from the "buf" variable being passed into "write". It originated as the variable "ev" with the type union perf_event* defined in the "perf_event__synthesize_attr" function in "tools/perf/util/header.c". In the "perf_event__synthesize_attr" function they allocate space with a malloc call using ev, then go on to only assign some of the member variables before passing "ev" on as a parameter to the "process" function therefore "ev" contains uninitialized memory. Changing the malloc call to zalloc to initialize all the members of "ev" which gets rid of the warning. To reproduce this warning, build perf by running: make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-fsanitize=memory\ -fsanitize-memory-track-origins" (Additionally, llvm might have to be installed and clang might have to be specified as the compiler - export CC=/usr/bin/clang) then running: tools/perf/perf record -o - ls / | tools/perf/perf --no-pager annotate\ -i - --stdio Please see the cover letter for why false positive warnings may be generated. Signed-off-by:
Numfor Mbiziwo-Tiapo <nums@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Drayton <mbd@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20190724234500.253358-2-nums@google.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Vince Weaver authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit 7622236c ] So I have been having lots of trouble with hand-crafted perf.data files causing segfaults and the like, so I have started fuzzing the perf tool. First issue found: If f_header.attr_size is 0 in the perf.data file, then perf will crash with a divide-by-zero error. Committer note: Added a pr_err() to tell the user why the command failed. Signed-off-by:
Vince Weaver <vincent.weaver@maine.edu> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907231100440.14532@macbook-airSigned-off-by:
-
Lucas Stach authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit 9a446ef0 ] The GPCv2 is a stacked IRQ controller below the ARM GIC. It doesn't care about the IRQ type itself, but needs to forward the type to the parent IRQ controller, so this one can be configured correctly. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1845038 [ Upstream commit 09e088a4 ] Fixes gcc '-Wunused-but-set-variable' warning: drivers/xen/xen-pciback/conf_space_capability.c: In function pm_ctrl_write: drivers/xen/xen-pciback/conf_space_capability.c:119:25: warning: variable old_state set but not used [-Wunused-but-set-variable] It is never used so can be removed. Reported-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Denis Kirjanov authored
BugLink: https://bugs.launchpad.net/bugs/1845038 commit 224c0497 upstream. get_registers() may fail with -ENOMEM and in this case we can read a garbage from the status variable tmp. Reported-by: syzbot+3499a83b2d062ae409d4@syzkaller.appspotmail.com Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by:
-
