- 03 Sep, 2015 40 commits
-
-
Paul Burton authored
The sc_used_math field of struct sigcontext & its variants has traditionally been used as a boolean value indicating only whether or not floating point context is saved within the sigcontext. With various supported FP modes & the ability to switch between them this information will no longer be enough to decode the meaning of the data stored in the sc_fpregs fields of struct sigcontext. To make that possible 3 bits are defined within sc_used_math: - Bit 0 (USED_FP) represents whether FP was used, essentially providing the boolean flag which sc_used_math as a whole provided previously. - Bit 1 (USED_FR1) provides the value of the Status.FR bit at the time the FP context was saved. - Bit 2 (USED_HYBRID_FPRS) indicates whether the FP context was saved under the hybrid FPR scheme. Essentially, when set the odd singles are located in bits 63:32 of the preceding even indexed sc_fpregs element. Any userland that tests whether the sc_used_math field is zero or non-zero will continue to function as expected. Having said that, I could not find any userland which uses the sc_used_math field at all. [ralf@linux-mips.org: Fixed rejects.] Signed-off-by:Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Matthew Fortune <matthew.fortune@imgtec.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linux-kernel@vger.kernel.org Cc: Richard Weinberger <richard@nod.at> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Maciej W. Rozycki <macro@codesourcery.com> Patchwork: https://patchwork.linux-mips.org/patch/10794/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
These functions are never called & thus dead code. Remove them. Signed-off-by:
-
Paul Burton authored
Make use of the common FP sigcontext code for O32 binaries running on MIPS64 kernels now that it is taking appropriate offsets into struct sigcontext(32) from struct mips_abi. [ralf@linux-mips.org: Fixed reject.] Signed-off-by:
-
Paul Burton authored
When a task uses 32 bit floating point, the odd indexed 32b register values are stored in bits 63:32 of the preceding even indexed 64b FP register field in saved context. Thus there is no point in preserving the odd indexed 64b register fields since they hold no valid context. This patch will cause them to be skipped, as is already done in arch/mips/kernel/signal32.c. [ralf@linux-mips.org: Fixed reject.] Signed-off-by:
-
Paul Burton authored
In preparation for sharing protected_{save,restore}_fp_context with compat ABIs, move the FP usage checks into said functions. This will both enable that code to be shared, and allow for extensions of it in further patches to also be shared. Signed-off-by: -
Paul Burton authored
When saving FP state to struct sigcontext, make use of the offsets provided by struct mips_abi to obtain appropriate addresses for the sc_fpregs & sc_fpc_csr fields of the sigcontext. This is done only for the native struct sigcontext in this patch (ie. for O32 in CONFIG_32BIT kernels or for N64 in CONFIG_64BIT kernels) but is done in preparation for sharing this code with compat ABIs in further patches. Signed-off-by:
-
Paul Burton authored
Add fields to struct mips_abi, which holds information regarding the kernel-userland ABI regarding signals, to specify the offsets to the FP related fields within the appropriate variant of struct sigcontext. Signed-off-by:
-
Paul Burton authored
The protected_{save,restore}_fp_context functions had effectively different implementations for EVA. Simplify & unify the code somewhat such that EVA configurations simply guarantee the FPU-not-owned path through the standard code path. Signed-off-by: -
Viresh Kumar authored
Migrate sni driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-mips@linux-mips.org Cc: linaro-kernel@lists.linaro.org Cc: Thomas Gleixner <tglx@linutronix.de> Patchwork: https://patchwork.linux-mips.org/patch/10612/Signed-off-by:
-
Viresh Kumar authored
Migrate sgidriver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We weren't doing anything in the ->set_mode() callback. So, this patch doesn't provide any set-state callbacks. Signed-off-by:
-
Viresh Kumar authored
Migrate ralink driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by:
-
Viresh Kumar authored
Migrate loongsoon32 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by:
-
Viresh Kumar authored
Migrate loongson driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. [ralf@linux-mips.org: Folded in Viresh's followon fix.] Signed-off-by:
-
Viresh Kumar authored
Migrate cevt-txx9 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by:
-
Viresh Kumar authored
Migrate cevt-rsb1250 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by:
-
Viresh Kumar authored
Migrate cevt-4k driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We weren't doing anything in the ->set_mode() callback. So, this patch doesn't provide any set-state callbacks. Signed-off-by:
-
Viresh Kumar authored
Migrate cevt-gt641xx driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by:
-
Viresh Kumar authored
Migrate cevt-ds1287 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by:
-
Viresh Kumar authored
Migrate cevt-bcm1480 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Read operation on R_SCD_TIMER_CFG and R_SCD_TIMER_INIT registers isn't performed now for many modes as there returned values aren't used. Signed-off-by:
-
Viresh Kumar authored
Migrate jz4740 driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Signed-off-by:
-
Viresh Kumar authored
Migrate jazz driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We weren't doing anything in the ->set_mode() callback. So, this patch doesn't provide any set-state callbacks. Signed-off-by:
-
Viresh Kumar authored
Migrate alchemy driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We weren't doing anything in the ->set_mode() callback. So, this patch doesn't provide any set-state callbacks. Signed-off-by:
-
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
Ralf Baechle authored
Signed-off-by: -
James Hogan authored
The generic field definitions (i.e. present before MIPS32/MIPS64) in mipsregs.h are conventionally not prefixed with MIPS_, so rename the recently added MIPS_ENTRYLO_* definitions for the G, V, D, and C fields to ENTRYLO_*. Also rearrange to put the EntryLo and EntryHi definitions in the right place in the file. Fixes: 8ab6abcb ("MIPS: mipsregs.h: Add EntryLo bit definitions") Reported-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10725/Signed-off-by:
-
James Hogan authored
The FrameMask register is relevant to the TLB so it should be dumped by dump_tlb_regs(), however it is only present in certain cores (r10000, r12000, r14000, r16000). Add dumping of it, conditional upon current_cpu_type(). Suggested-by:
Joshua Kinard <kumba@gentoo.org> Suggested-by:
-
James Hogan authored
The PageGrain register may not exist if certain architectural features aren't present, therefore only print out its value when dumping the TLB registers if it is expected to contain fields relevant to the TLB. Fixes: d1e9a4f5 ("MIPS: Add SysRq operation to dump TLBs on all CPUs") Reported-by:
-
James Hogan authored
Probe Config3 for small page support. This will be useful to give clues as to whether the PageGrain register exists. Signed-off-by:
-
James Hogan authored
The TLB registers are dumped in a couble of places: - sysrq_tlbdump_single() - when dumping TLB state. - do_mcheck() - in response to a machine check error. The main TLB registers also differ between r3k and r4k, but r4k appears to be assumed. Refactor this code into a dump_tlb_regs() function, implemented for both r3k and r4k, and used by both of the above functions. Fixes: d1e9a4f5 ("MIPS: Add SysRq operation to dump TLBs on all CPUs") Suggested-by:
-
James Hogan authored
Commit d1e9a4f5 ("MIPS: Add SysRq operation to dump TLBs on all CPUs") added the 'x' sysrq key for dumping MIPS TLB entries, but didn't document it in Documentation/sysrq.txt. Add mention of the MIPS use of the 'x' SysRq key. Reported-by:
Jonathan Corbet <corbet@lwn.net> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-doc@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10720/Signed-off-by:
-
Markos Chandras authored
Commit c8a34581 ("MIPS: Emulate the BC1{EQ,NE}Z FPU instructions") added support for emulating the new R6 BC1{EQ,NE}Z branches but it missed the case where the instruction that caused the exception was not on a DS. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Fixes: c8a34581 ("MIPS: Emulate the BC1{EQ,NE}Z FPU instructions") Cc: <stable@vger.kernel.org> # 4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10738/Signed-off-by:
-
Markos Chandras authored
The mfhc/mthc instructions are supported on MIPS R6 so emulate them if needed. Signed-off-by:
-
Markos Chandras authored
Fix indentation for the final 'else' blocks. Signed-off-by:
-
Markos Chandras authored
The double format (d_fmt) case uses an opening bracket which then closes at the end of the word format (w_fmt). This can be rather confusing so add the closing bracket at the end of the d_fmt case and use another one for the w_fmt one. Signed-off-by:
-
Markos Chandras authored
The MIPS R6 ISA support has been part of mainline since v4.0 and it should be in a good shape nowadays so it is not an experimental feature anymore. Signed-off-by:
-
Ralf Baechle authored
These are bitfields and treating them as signed values doesn't make any sense. Signed-off-by:
Chris Packham <judge.packham@gmail.com>
-
Chris Packham authored
Update __read_32bit_c0_register() and __read_32bit_c0_ctrl_register() to use "unsigned int res;" instead of "int res;". There is little reason to treat these register values as signed. They are either counters (which by definition are unsigned) or are made up of various bit fields to be interpreted as per the CPU datasheet. This has come up via u-boot[1] which sync's asm/mipsregs.h with the kernel. In u-boots case the value read from read_c0_count() is assigned to an unsigned long [2] which triggers a sign extension and causes a bug. U-boot should probably be more explicit about the types used for the timer_read_counter() API but that aside is there any reason to treat these values as signed integers? A quick grep around the arch/mips makes me thing that there may be some bugs lurking when read_c0_count() starts to yield a negative value but I haven't really explored any of them. [1] - http://lists.denx.de/pipermail/u-boot/2015-July/219086.html [2] - http://git.denx.de/?p=u-boot.git;a=blob;f=arch/mips/cpu/time.c#l11Signed-off-by:
-
