* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] qlogicpti: fix sg list traversal error in continuation entries
  [SCSI] Fix hang with split requests
  [SCSI] qla2xxx: Defer enablement of RISC interrupts until ISP initialization completes.

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  scsi: fix fall out of sg-chaining patch in qlogicpti

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  sata_nv: reinstate nv_hardreset() for non generic controllers

Commit f072181e ("kconfig: drop the
""trying to assign nonexistent symbol" warning") simply dropped the
warnings, but it does a little more than that, it also marks the current
.config as needed saving, so add this back.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Recent changes to oldconfig have mixed up the silentoldconfig handling,
so this fixes that by clearly separating that special mode, e.g.
KCONFIG_NOSILENTUPDATE is only relevant here, the .config is written as
needed.

This will also properly close Bug 11230.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The VFS interface for the 'd_compare()' is a bit special (read: 'odd'),
because it really just essentially replaces a memcmp().  The filesystem
is supposed to just compare the two names with whatever case-independent
or other function.

And when I say 'is supposed to', I obviously mean that 'procfs does odd
things, and actually looks at the dentry that we don't even pass down,
rather than just the name'.  Which results in problems, because we
actually call d_compare before we have even verified that the dentry is
still hashed at all.

And that causes a problm since the inode that procfs looks at may have
been free'd and the d_inode pointer is NULL.  procfs just assumes that
all dentries are positive, since procfs itself never generates a
negative one.  But memory pressure will still result in the dentry
getting torn down, and as it is removed by RCU, it still remains visible
on some lists - and to d_compare.

If the filesystem just did a name comparison, we wouldn't care.  And we
could just fix procfs to know about negative dentries too.  But rather
than have the low-level filesystems know about internal VFS details,
just move the check for a unhashed dentry up a bit, so that we will only
call d_compare on dentries that are still active.

The actual oops this caused didn't look like a NULL pointer dereference
because procfs did a 'container_of(inode, struct proc_inode, vfs_inode)'
to get at its internal proc_inode information from the inode pointer,
and accessed a field below the inode. So the oops would look something
like

	BUG: unable to handle kernel paging request at fffffffffffffff0
	IP: [<ffffffff802bc6c6>] proc_sys_compare+0x36/0x50

and was seen on both x86-64 (Alexey Dobriyan and Hugh Dickins) and
ppc64 (Hugh Dickins).
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>

Boaz writes:

"I've reviewed all patches since Matthew's, and I find one small
problem.

In the load_cmd() there is a compound loop where the first 4 sg's are
set then the rest are set into a memory structure in group of 7 sg's.

Well the second 7-group and on is a bug because sg pointer does not advance.
This is a fall out from Jens's patch."

The reporter, Meelis Roos <mroos@ut.ee>, verified that this patch
does indeed fix his problem with qlogicpti.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Commit 2fd673ec which tried to remove
hardreset for generic accidentally removed it for all flavors as all
others were inheriting from nv_generic_ops.  This patch reinstates
nv_hardreset() and puts it into nv_common_ops which all flavors
inherit from.  nv_generic_ops now inherits from nv_common_ops and
overrides .hardreset to ATA_OP_NULL.

While at it, explain why nv_hardreset and ATA_OP_NULL override are
necessary.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

The current sg list traversal logic for the continuation entries
doesn't advance the list pointer once all seven slots are used, so the
next continuation entry (if there is one) wrongly begins again at the
start of the sg list.

Fix by advancing the sg pointer after the for_each_sg().
Reported-by: Meelis Roos <mroos@ut.ee>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: remove unneeded power_mutex lock in snd_pcm_drop
  ALSA: fix locking in snd_pcm_open*() and snd_rawmidi_open*()

* git://oss.sgi.com:8090/xfs/linux-2.6:
  [XFS] Remove xfs_iext_irec_compact_full()
  [XFS] Fix extent list corruption in xfs_iext_irec_compact_full().

Delete ARM's own cnt32_to_63.h as the copy in include/linux/ should now be
used instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'linux-next' of git://git.infradead.org/~dedekind/ubifs-2.6:
  UBIFS: fix printk format warnings
  UBIFS: remove incorrect assert
  UBIFS: TNC / GC race fixes
  UBIFS: create the name of the background thread in every case

Yet another bug was found in xfs_iext_irec_compact_full() and while the
source of the bug was found it wasn't an easy task to track it down
because the conditions are very difficult to reproduce.

A HUGE thank-you goes to Russell Cattelan and Eric Sandeen for their
significant effort in tracking down the source of this corruption.

xfs_iext_irec_compact_full() and xfs_iext_irec_compact_pages() are almost
identical - they both compact indirect extent lists by moving extents from
subsequent buffers into earlier ones. xfs_iext_irec_compact_pages() only
moves extents if all of the extents in the next buffer will fit into the
empty space in the buffer before it. xfs_iext_irec_compact_full() will go
a step further and move part of the next buffer if all the extents wont
fit. It will then shift the remaining extents in the next buffer up to the
start of the buffer. The bug here was that we did not update er_extoff and
this caused extent list corruption.

It does not appear that this extra functionality gains us much. Calling
xfs_iext_irec_compact_pages() instead will do a good enough job at
compacting the indirect list and will be quicker too.

For the case in xfs_iext_indirect_to_direct() the total number of extents
in the indirect list will fit into one buffer so we will never need the
extra functionality of xfs_iext_irec_compact_full() there.

Also xfs_iext_irec_compact_pages() doesn't need to do a memmove() (the
buffers will never overlap) so we don't want the performance hit that can
incur.

SGI-PV: 987159

SGI-Modid: xfs-linux-melb:xfs-kern:32166a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>

If we don't move all the records from the next buffer into the current
buffer then we need to update the er_extoff field of the next buffer as we
shift the remaining records to the start of the buffer.

SGI-PV: 987159

SGI-Modid: xfs-linux-melb:xfs-kern:32165a
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Russell Cattelan <cattelan@thebarn.com>

Commit ee1e2c82 ("IPoIB: Refresh paths instead of flushing them on SM
change events") changed how paths are flushed on an SM event.  This
change introduces a problem if the path record query triggered by
fails, causing path->ah to become NULL.  A later successful path query
will then trigger WARN_ON() in path_rec_completion(), and crash
because path->ah has already been freed, so the ipoib_put_ah() inside
the lock in path_rec_completion() may actually drop the last reference
(contrary to the comment that claims this is safe).

Fix this by updating path->ah and freeing old_ah only when the path
record query is successful.  This prevents the neighbour AH and that
path AH from getting out of sync.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1194>
Reported-by: Rabah Salem <ravah@mellanox.com>
Debugged-by: Eli Cohen <eli@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The power_mutex lock in snd_pcm_drop may cause a possible deadlock
chain, and above all, it's unneeded.  Let's get rid of it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The PCM and rawmidi open callbacks have a lock against card->controls_list
but it takes a wrong one, card->controls_rwsem, instead of a right one
card->ctl_files_rwlock.  This patch fixes them.

This change also fixes automatically the potential deadlocks due to
mm->mmap_sem in munmap and copy_from/to_user, reported by Sitsofe
Wheeler:

  A: snd_ctl_elem_user_tlv(): card->controls_rwsem => mm->mmap_sem
  B: snd_pcm_open(): card->open_mutex => card->controls_rwsem
  C: munmap: mm->mmap_sem => snd_pcm_release(): card->open_mutex

The patch breaks the chain.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  netfilter: ip6t_{hbh,dst}: Rejects not-strict mode on rule insertion
  ath9k: disable MIB interrupts to fix interrupt storm
  [Bluetooth] Fix USB disconnect handling of btusb driver
  [Bluetooth] Fix wrong URB handling of btusb driver
  [Bluetooth] Fix I/O errors on MacBooks with Broadcom chips

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Fix mailing lists in two MAINTAINERS entries
  i2c-dev: Return correct error code on class_create() failure
  i2c-powermac: Fix section for probe and remove functions

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: prevent stale state of c1e_mask across CPU offline/online, fix

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fixe the definition of PTRS_PER_PGD
  [MIPS] au1000: Fix gpio direction

Make sched_clock() report time since boot rather than time since last
timer interrupt.

Make sched_clock() expand and scale the 32-bit TSC value running at
IOCLK speed (~33MHz) to a 64-bit nanosecond counter, using cnt32_to_63()
acquired from the ARM arch and without using slow DIVU instructions
every call.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Move asm-arm/cnt32_to_63.h to include/linux/ so that MN10300 can make
use of it too.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The current code ignores rules for internal options in HBH/DST options
header in packet processing if 'Not strict' mode is specified (which is not
implemented). Clearly it is not expected by user.

Kernel should reject HBH/DST rule insertion with 'Not strict' mode
in the first place.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: fix put_data error handling
  9p: use an IS_ERR test rather than a NULL test
  9p: introduce missing kfree
  9p-trans_fd: fix and clean up module init/exit paths
  9p-trans_fd: don't do fs segment mangling in p9_fd_poll()
  9p-trans_fd: clean up p9_conn_create()
  9p-trans_fd: fix trans_fd::p9_conn_destroy()
  9p: implement proper trans module refcounting and unregistration

Abhishek Kulkarni pointed out an inconsistency in the way
errors are returned from p9_put_data.  On deeper exploration it
seems the error handling for this path was completely wrong.
This patch adds checks for allocation problems and propagates
errors correctly.
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

In case of error, the function p9_client_walk returns an ERR pointer, but
never returns a NULL pointer.  So a NULL test that comes after an IS_ERR
test should be deleted.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@match_bad_null_test@
expression x, E;
statement S1,S2;
@@
x = p9_client_walk(...)
... when != x = E
*  if (x != NULL)
S1 else S2
// </smpl>
Signed-off-by: Julien Brunel <brunel@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Error handling code following a kmalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,l;
position p1,p2;
expression *ptr != NULL;
@@

(
if ((x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...)) == NULL) S
|
x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
)
<... when != x
     when != if (...) { <+...x...+> }
x->f = E
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

trans_fd leaked p9_mux_wq on module unload.  Fix it.  While at it,
collapse p9_mux_global_init() into p9_trans_fd_init().  It's easier to
follow this way and the global poll_tasks array is about to removed
anyway.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

p9_fd_poll() is never called with user pointers and f_op->poll()
doesn't expect its arguments to be from userland.  There's no need to
set kernel ds before calling f_op->poll() from p9_fd_poll().  Remove
it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

* Use kzalloc() to allocate p9_conn and remove 0/NULL initializations.

* Clean up error return paths.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

p9_conn_destroy() first kills all current requests by calling
p9_conn_cancel(), then waits for the request list to be cleared by
waiting on p9_conn->equeue.  After that, polling is stopped and the
trans is destroyed.  This sequence has a few problems.

* Read and write works were never cancelled and the p9_conn can be
  destroyed while the works are running as r/w works remove requests
  from the list and dereference the p9_conn from them.

* The list emptiness wait using p9_conn->equeue wouldn't trigger
  because p9_conn_cancel() always clears all the lists and the only
  way the wait can be triggered is to have another task to issue a
  request between the slim window between p9_conn_cancel() and the
  wait, which isn't safe under the current implementation with or
  without the wait.

This patch fixes the problem by first stopping poll, which can
schedule r/w works, first and cancle r/w works which guarantees that
r/w works are not and will not run from that point and then calling
p9_conn_cancel() and do the rest of destruction.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p trans modules aren't refcounted nor were they unregistered
properly.  Fix it.

* Add 9p_trans_module->owner and reference the module on each trans
  instance creation and put it on destruction.

* Protect v9fs_trans_list with a spinlock.  This isn't strictly
  necessary as the list is manipulated only during module loading /
  unloading but it's a good idea to make the API safe.

* Unregister trans modules when the corresponding module is being
  unloaded.

* While at it, kill unnecessary EXPORT_SYMBOL on p9_trans_fd_init().
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Enabling the MIB interrupts has proven to cause an
interrupt storm after 7 hours of run. We will make use of the
MIB interrupt once we have ANI supported added so for now
to cure this we disable the interrupt.

The interrupt storm can be seen as follows after 7 hours of run
as reported by  Steven Noonan <steven@uplinklabs.net>:

18:28:38          sum   1106.00
18:28:39          sum   1037.62
18:28:40          sum   1069.00
18:28:41          sum   1167.00
18:28:42          sum   1155.00
18:28:43          sum   1339.00
18:28:44          sum  18355.00
18:28:45          sum  17845.45
18:28:46          sum  15285.00
18:28:47          sum  17511.00
18:28:48          sum  17568.69
18:28:49          sum  17704.04
18:28:50          sum  18566.67
18:28:51          sum  18913.13

at 18:28:44 the MIB interrupt kicked off and caused huge
latency which can be seen even on a video he submitted:

http://www.youtube.com/watch?v=4GeCx1gZMpASigned-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Two MAINTAINER entries (I2C/SMBUS STUB DRIVER and SIS 96X I2C/SMBUS
DRIVER) were improperly pointing to the lm-sensors mailing list
instead of the i2c mailing list. Fix them.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>

We need to convert the error pointer from class_create(), else we'll return the
successful return code from register_chrdev() on failure.
Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

__devexit for i2c_powermac_probe is obviously wrong.  In the definition
of struct platform_driver i2c_powermac_driver the remove function
i2c_powermac_remove is wrapped in __devexit_p, so it should be defined
using __devexit.
Signed-off-by: Uwe Kleine-Koenig <ukleinek@informatik.uni-freiburg.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Fix build error introduced by commit 4faac97d ("x86: prevent stale
state of c1e_mask across CPU offline/online").

process_32.c needs to include idle.h to get the prototype for
c1e_remove_cpu()
Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>