- 07 Jul, 2022 9 commits
-
-
Vladis Dronov authored
Select the new implementation of CHACHA20 for S390 when available. It is faster than the generic software implementation, but also prevents some linker errors in certain situations. Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/linux-kernel/202207030630.6SZVkrWf-lkp@intel.com/Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jason A. Donenfeld authored
Various accelerated software implementation Kconfig values for S390 were mistakenly placed into drivers/crypto/Kconfig, even though they're mainly just SIMD code and live in arch/s390/crypto/ like usual. This gives them the very unusual dependency on CRYPTO_HW, which leads to problems elsewhere. This patch fixes the issue by moving the Kconfig values for non-hardware drivers into the usual place in crypto/Kconfig. Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jason A. Donenfeld authored
This makes for faster tests, faster compile time, and allows us to ditch ACPI finally. Signed-off-by:
-
Jason A. Donenfeld authored
These selftests are used for much more extensive changes than just the wireguard source files. So always call the kernel's build file, which will do something or nothing after checking the whole tree, per usual. Signed-off-by:
-
Jason A. Donenfeld authored
This should be a bit more stable hopefully. Signed-off-by:
-
Jason A. Donenfeld authored
Not all platforms have an RTC, and rather than trying to force one into each, it's much easier to just set a fixed time. This is necessary because WireGuard's latest handshakes parameter is returned in wallclock time, and if the system time isn't set, and the system is really fast, then this returns 0, which trips the test. Turning this on requires setting CONFIG_COMPAT_32BIT_TIME=y, as musl doesn't support settimeofday without it. Signed-off-by:
-
Heiner Kallweit authored
66e4c8d9 ("net: warn if transport header was not set") added a check that triggers a warning in r8169, see [0]. The commit referenced in the Fixes tag refers to the change from which the patch applies cleanly, there's nothing wrong with this commit. It seems the actual issue (not bug, because the warning is harmless here) was introduced with bdfa4ed6 ("r8169: use Giant Send"). [0] https://bugzilla.kernel.org/show_bug.cgi?id=216157 Fixes: 8d520b4d ("r8169: work around RTL8125 UDP hw bug") Reported-by:
Erhard F. <erhard_f@mailbox.org> Tested-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/1b2c2b29-3dc0-f7b6-5694-97ec526d51a0@gmail.comSigned-off-by:
-
Duoming Zhou authored
There are UAF bugs caused by rose_t0timer_expiry(). The root cause is that del_timer() could not stop the timer handler that is running and there is no synchronization. One of the race conditions is shown below: (thread 1) | (thread 2) | rose_device_event | rose_rt_device_down | rose_remove_neigh rose_t0timer_expiry | rose_stop_t0timer(rose_neigh) ... | del_timer(&neigh->t0timer) | kfree(rose_neigh) //[1]FREE neigh->dce_mode //[2]USE | The rose_neigh is deallocated in position [1] and use in position [2]. The crash trace triggered by POC is like below: BUG: KASAN: use-after-free in expire_timers+0x144/0x320 Write of size 8 at addr ffff888009b19658 by task swapper/0/0 ... Call Trace: <IRQ> dump_stack_lvl+0xbf/0xee print_address_description+0x7b/0x440 print_report+0x101/0x230 ? expire_timers+0x144/0x320 kasan_report+0xed/0x120 ? expire_timers+0x144/0x320 expire_timers+0x144/0x320 __run_timers+0x3ff/0x4d0 run_timer_softirq+0x41/0x80 __do_softirq+0x233/0x544 ... This patch changes rose_stop_ftimer() and rose_stop_t0timer() in rose_remove_neigh() to del_timer_sync() in order that the timer handler could be finished before the resources such as rose_neigh and so on are deallocated. As a result, the UAF bugs could be mitigated. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220705125610.77971-1-duoming@zju.edu.cnSigned-off-by:
-
Oliver Neukum authored
usbnet_write_cmd_async() mixed up which buffers need to be freed in which error case. v2: add Fixes tag v3: fix uninitialized buf pointer Fixes: 877bd862 ("usbnet: introduce usbnet 3 command helpers") Signed-off-by:
Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220705125351.17309-1-oneukum@suse.comSigned-off-by:
-
- 06 Jul, 2022 13 commits
-
-
Gal Pressman authored
This reverts commit 284b4d93. When using TLS device offload and coming from tls_device_reencrypt() flow, -EBADMSG error in tls_do_decryption() should not be counted towards the TLSTlsDecryptError counter. Move the counter increase back to the decrypt_internal() call site in decrypt_skb_update(). This also fixes an issue where: if (n_sgin < 1) return -EBADMSG; Errors in decrypt_internal() were not counted after the cited patch. Fixes: 284b4d93 ("tls: rx: move counting TlsDecryptErrors for sync") Cc: Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Gal Pressman <gal@nvidia.com> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: Path manager fixes for 5.19 The MPTCP userspace path manager is new in 5.19, and these patches fix some issues in that new code. Patches 1-3 fix path manager locking issues. Patches 4 and 5 allow userspace path managers to change priority of established subflows using the existing MPTCP_PM_CMD_SET_FLAGS generic netlink command. Includes corresponding self test update. Patches 6 and 7 fix accounting of available endpoint IDs and the MPTCP_MIB_RMSUBFLOW counter. ==================== Signed-off-by: -
Geliang Tang authored
This patch increases MPTCP_MIB_RMSUBFLOW mib counter in userspace pm destroy subflow function mptcp_nl_cmd_sf_destroy() when removing subflow. Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment") Signed-off-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
In mptcp_pm_nl_rm_addr_or_subflow() we always mark as available the id corresponding to the just removed address. The used bitmap actually tracks only the local IDs: we must restrict the operation when a (local) subflow is removed. Fixes: a88c9e49 ("mptcp: do not block subflows creation on errors") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Kishen Maloor authored
This change updates the testing sample (pm_nl_ctl) to exercise the updated MPTCP_PM_CMD_SET_FLAGS command for userspace PMs to issue MP_PRIO signals over the selected subflow. E.g. ./pm_nl_ctl set 10.0.1.2 port 47234 flags backup token 823274047 rip 10.0.1.1 rport 50003 userspace_pm.sh has a new selftest that invokes this command. Fixes: 259a834f ("selftests: mptcp: functional tests for the userspace PM type") Acked-by:
Kishen Maloor <kishen.maloor@intel.com> Signed-off-by:
-
Kishen Maloor authored
This change updates MPTCP_PM_CMD_SET_FLAGS to allow userspace PMs to issue MP_PRIO signals over a specific subflow selected by the connection token, local and remote address+port. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/286 Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment") Acked-by:
-
Mat Martineau authored
When setting up a subflow's flags for sending MP_PRIO MPTCP options, the subflow socket lock was not held while reading and modifying several struct members that are also read and modified in mptcp_write_options(). Acquire the subflow socket lock earlier and send the MP_PRIO ACK with that lock already acquired. Add a new variant of the mptcp_subflow_send_ack() helper to use with the subflow lock held. Fixes: 06706542 ("mptcp: add the outgoing MP_PRIO support") Acked-by:
-
Mat Martineau authored
The in-kernel path manager code for changing subflow flags acquired both the msk socket lock and the PM lock when possibly changing the "backup" and "fullmesh" flags. mptcp_pm_nl_mp_prio_send_ack() does not access anything protected by the PM lock, and it must release and reacquire the PM lock. By pushing the PM lock to where it is needed in mptcp_pm_nl_fullmesh(), the lock is only acquired when the fullmesh flag is changed and the backup flag code no longer has to release and reacquire the PM lock. The change in locking context requires the MIB update to be modified - move that to a better location instead. This change also makes it possible to call mptcp_pm_nl_mp_prio_send_ack() for the userspace PM commands without manipulating the in-kernel PM lock. Fixes: 0f9f696a ("mptcp: add set_flags command in PM netlink") Acked-by:
-
Paolo Abeni authored
The user-space PM subflow removal path uses a couple of helpers that must be called under the msk socket lock and the current code lacks such requirement. Change the existing lock scope so that the relevant code is under its protection. Fixes: 702c2f64 ("mptcp: netlink: allow userspace-driven subflow establishment") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/287Signed-off-by:
-
David S. Miller authored
Vlad Buslov says: ==================== net: Fix police 'continue' action offload TC act_police with 'continue' action had been supported by mlx5 matchall classifier offload implementation for some time. However, 'continue' was assumed implicitly and recently got broken in multiple places. Fix it in both TC hardware offload validation code and mlx5 driver. ==================== Signed-off-by: -
Vlad Buslov authored
Referenced commit prepared the code for upcoming extension that allows mlx5 to offload police action attached to flower classifier. However, with regard to existing matchall classifier offload validation should be reversed as FLOW_ACTION_CONTINUE is the only supported notexceed police action type. Fix the problem by allowing FLOW_ACTION_CONTINUE for police action and extend scan_tc_matchall_fdb_actions() to only allow such actions with matchall classifier. Fixes: d97b4b10 ("flow_offload: reject offload for all drivers with invalid police parameters") Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Acked-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
-
Vlad Buslov authored
Offloading police with action TC_ACT_UNSPEC was erroneously disabled even though it was supported by mlx5 matchall offload implementation, which didn't verify the action type but instead assumed that any single police action attached to matchall classifier is a 'continue' action. Lack of action type check made it non-obvious what mlx5 matchall implementation actually supports and caused implementers and reviewers of referenced commits to disallow it as a part of improved validation code. Fixes: b8cd5831 ("net: flow_offload: add tc police action parameters") Fixes: b50e462b ("net/sched: act_police: Add extack messages for offload failure") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Tested-by:
-
Michael Walle authored
Instead of counting the child nodes in the device tree, hardcode the number of ports in the driver itself. The counting won't work at all if an ethernet port is marked as disabled, e.g. because it is not connected on the board at all. It turns out that the LAN9662 and LAN9668 use the same switching IP with the same synthesis parameters. The only difference is that the output ports are not connected. Thus, we can just hardcode the number of physical ports to 8. Fixes: db8bcaad ("net: lan966x: add the basic lan966x driver") Signed-off-by:
Michael Walle <michael@walle.cc> Reviewed-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220704153654.1167886-1-michael@walle.ccSigned-off-by:
-
- 05 Jul, 2022 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix deadlock when powering on. * tag 'for-net-2022-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: core: Fix deadlock on hci_power_on_sync. ==================== Link: https://lore.kernel.org/r/20220705202700.1689796-1-luiz.dentz@gmail.comSigned-off-by:
-
Vasyl Vavrychuk authored
`cancel_work_sync(&hdev->power_on)` was moved to hci_dev_close_sync in commit [1] to ensure that power_on work is canceled after HCI interface down. But, in certain cases power_on work function may call hci_dev_close_sync itself: hci_power_on -> hci_dev_do_close -> hci_dev_close_sync -> cancel_work_sync(&hdev->power_on), causing deadlock. In particular, this happens when device is rfkilled on boot. To avoid deadlock, move power_on work canceling out of hci_dev_do_close/hci_dev_close_sync. Deadlock introduced by commit [1] was reported in [2,3] as broken suspend. Suspend did not work because `hdev->req_lock` held as result of `power_on` work deadlock. In fact, other BT features were not working. It was not observed when testing [1] since it was verified without rfkill in place. NOTE: It is not needed to cancel power_on work from other places where hci_dev_do_close/hci_dev_close_sync is called in case: * Requests were serialized due to `hdev->req_workqueue`. The power_on work is first in that workqueue. * hci_rfkill_set_block which won't close device anyway until HCI_SETUP is on. * hci_sock_release which runs after hci_sock_bind which ensures HCI_SETUP was cleared. As result, behaviour is the same as in pre-dd06ed7 commit, except power_on work cancel added to hci_dev_close. [1]: commit ff7f2926 ("Bluetooth: core: Fix missing power_on work cancel on HCI close") [2]: https://lore.kernel.org/lkml/20220614181706.26513-1-max.oss.09@gmail.com/ [2]: https://lore.kernel.org/lkml/1236061d-95dd-c3ad-a38f-2dae7aae51ef@o2.pl/ Fixes: ff7f2926 ("Bluetooth: core: Fix missing power_on work cancel on HCI close") Signed-off-by:
Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reported-by:
Max Krummenacher <max.krummenacher@toradex.com> Reported-by:
Mateusz Jonczyk <mat.jonczyk@o2.pl> Tested-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Paolo Abeni authored
Vladimir Oltean says: ==================== Fix bridge_vlan_aware.sh and bridge_vlan_unaware.sh with IFF_UNICAST_FLT Make sure that h1 and h2 don't drop packets with a random MAC DA, which otherwise confuses these selftests. Also, fix an incorrect error message found during those failures. ==================== Link: https://lore.kernel.org/r/20220703073626.937785-1-vladimir.oltean@nxp.comSigned-off-by:
-
Vladimir Oltean authored
When packets are not received, they aren't received on $host1_if, so the message talking about the second host not receiving them is incorrect. Fix it. Fixes: d4deb014 ("selftests: forwarding: Add a test for FDB learning") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
-
Vladimir Oltean authored
The first host interface has by default no interest in receiving packets MAC DA de:ad:be:ef:13:37, so it might drop them before they hit the tc filter and this might confuse the selftest. Enable promiscuous mode such that the filter properly counts received packets. Fixes: d4deb014 ("selftests: forwarding: Add a test for FDB learning") Signed-off-by:
-
Vladimir Oltean authored
As mentioned in the blamed commit, flood_unicast_test() works by checking the match count on a tc filter placed on the receiving interface. But the second host interface (host2_if) has no interest in receiving a packet with MAC DA de:ad:be:ef:13:37, so its RX filter drops it even before the ingress tc filter gets to be executed. So we will incorrectly get the message "Packet was not flooded when should", when in fact, the packet was flooded as expected but dropped due to an unrelated reason, at some other layer on the receiving side. Force h2 to accept this packet by temporarily placing it in promiscuous mode. Alternatively we could either deliver to its MAC address or use tcpdump_start, but this has the fewest complications. This fixes the "flooding" test from bridge_vlan_aware.sh and bridge_vlan_unaware.sh, which calls flood_test from the lib. Fixes: 236dd50b ("selftests: forwarding: Add a test for flooded traffic") Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-5.19-20220704' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== can 2022-07-04 The 1st patch is by Oliver Hartkopp, targets the BCM CAN protocol and converts a costly synchronize_rcu() to call_rcu() to fix a performance regression. Srinivas Neeli's patch for the xilinx_can driver drops the brp limit down to 1, as only the pre-production silicon have an issue with a brp of 1. The next patch is by Duy Nguyen and fixes the data transmission on R-Car V3U SoCs in the rcar_canfd driver. Rhett Aultman's patch fixes a DMA memory leak in the gs_usb driver. Liang He's patch removes an extra of_node_get() in the grcan driver. The next 2 patches are by me, target the m_can driver and fix the timestamp handling used for peripheral devices like the tcan4x5x. Jimmy Assarsson contributes 3 patches for the kvaser_usb driver and fixes CAN clock and bit timing related issues. The remaining 5 patches target the mcp251xfd driver. Thomas Kopp contributes 2 patches to improve the workaround for broken CRC when reading the TBC register. 3 patches by me add a missing hrtimer_cancel() during the ndo_stop() callback, and fix the reading of the Device ID register. * tag 'linux-can-fixes-for-5.19-20220704' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix endianness conversion can: mcp251xfd: mcp251xfd_register_get_dev_id(): use correct length to read dev_id can: mcp251xfd: mcp251xfd_stop(): add missing hrtimer_cancel() can: mcp251xfd: mcp251xfd_regmap_crc_read(): update workaround broken CRC on TBC register can: mcp251xfd: mcp251xfd_regmap_crc_read(): improve workaround handling for mcp2517fd can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_info can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits can: m_can: m_can_chip_config(): actually enable internal timestamping can: grcan: grcan_probe(): remove extra of_node_get() can: gs_usb: gs_usb_open/close(): fix memory leak can: rcar_canfd: Fix data transmission failed on R-Car V3U Revert "can: xilinx_can: Limit CANFD brp to 2" can: bcm: use call_rcu() instead of costly synchronize_rcu() ==================== Link: https://lore.kernel.org/r/20220704122613.1551119-1-mkl@pengutronix.deSigned-off-by:
-
- 04 Jul, 2022 11 commits
-
-
Marc Kleine-Budde authored
In mcp251xfd_register_get_dev_id() the device ID register is read with handcrafted SPI transfers. As all registers, this register is in little endian. Further it is not naturally aligned in struct mcp251xfd_map_buf_nocrc::data. However after the transfer the register content is converted from big endian to CPU endianness not taking care of being unaligned. Fix the conversion by converting from little endian to CPU endianness taking the unaligned source into account. Side note: So far the register content is 0x0 on all mcp251xfd compatible chips, and is only used for an informative printk. Link: https://lore.kernel.org/all/20220627092859.809042-1-mkl@pengutronix.de Fixes: 55e5b97f ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Reviewed-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
The device ID register is 32 bits wide. The driver uses incorrectly the size of a pointer to a u32 to calculate the length of the SPI transfer. This results in a read of 2 registers on 64 bit platforms. This is no problem on the Linux side, as the RX buffer of the SPI transfer is large enough. In the mpc251xfd chip this results in the read of an undocumented register. So far no problems were observed. Fix the length of the SPI transfer to read the device ID register only. Link: https://lore.kernel.org/all/20220616094914.244440-1-mkl@pengutronix.de Fixes: 55e5b97f ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Reported-by:
-
Marc Kleine-Budde authored
In commit 169d00a2 ("can: mcp251xfd: add TX IRQ coalescing support") software based TX coalescing was added to the driver. The key idea is to keep the TX complete IRQ disabled for some time after processing it and re-enable later by a hrtimer. When bringing the interface down, this timer has to be stopped. Add the missing hrtimer_cancel() of the tx_irq_time hrtimer to mcp251xfd_stop(). Link: https://lore.kernel.org/all/20220620143942.891811-1-mkl@pengutronix.de Fixes: 169d00a2 ("can: mcp251xfd: add TX IRQ coalescing support") Cc: stable@vger.kernel.org # v5.18 Reviewed-by:
-
Thomas Kopp authored
The mcp251xfd compatible chips have an erratum ([1], [2]), where the received CRC doesn't match the calculated CRC. In commit c7eb923c ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register") the following workaround was implementierend. - If a CRC read error on the TBC register is detected and the first byte is 0x00 or 0x80, the most significant bit of the first byte is flipped and the CRC is calculated again. - If the CRC now matches, the _original_ data is passed to the reader. For now we assume transferred data was OK. New investigations and simulations indicate that the CRC send by the device is calculated on correct data, and the data is incorrectly received by the SPI host controller. Use flipped instead of original data and update workaround description in mcp251xfd_regmap_crc_read(). [1] mcp2517fd: DS80000792C: "Incorrect CRC for certain READ_CRC commands" [2] mcp2518fd: DS80000789C: "Incorrect CRC for certain READ_CRC commands" Link: https://lore.kernel.org/all/DM4PR11MB53901D49578FE265B239E55AFB7C9@DM4PR11MB5390.namprd11.prod.outlook.com Fixes: c7eb923c ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register") Cc: stable@vger.kernel.org Signed-off-by:
Thomas Kopp <thomas.kopp@microchip.com> [mkl: split into 2 patches, update patch description and documentation] Signed-off-by:
-
Thomas Kopp authored
The mcp251xfd compatible chips have an erratum ([1], [2]), where the received CRC doesn't match the calculated CRC. In commit c7eb923c ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register") the following workaround was implementierend. - If a CRC read error on the TBC register is detected and the first byte is 0x00 or 0x80, the most significant bit of the first byte is flipped and the CRC is calculated again. - If the CRC now matches, the _original_ data is passed to the reader. For now we assume transferred data was OK. Measurements on the mcp2517fd show that the workaround is applicable not only of the lowest byte is 0x00 or 0x80, but also if 3 least significant bits are set. Update check on 1st data byte and workaround description accordingly. [1] mcp2517fd: DS80000792C: "Incorrect CRC for certain READ_CRC commands" [2] mcp2518fd: DS80000789C: "Incorrect CRC for certain READ_CRC commands" Link: https://lore.kernel.org/all/DM4PR11MB53901D49578FE265B239E55AFB7C9@DM4PR11MB5390.namprd11.prod.outlook.com Fixes: c7eb923c ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register") Cc: stable@vger.kernel.org Reported-by:
Pavel Modilaynen <pavel.modilaynen@volvocars.com> Signed-off-by:
-
Jimmy Assarsson authored
Use correct bittiming limits depending on device. For devices based on USBcanII, Leaf M32C or Leaf i.MX28. Fixes: 080f40a6 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Fixes: b4f20130 ("can: kvaser_usb: add support for Kvaser Leaf v2 and usb mini PCIe") Fixes: f5d4abea ("can: kvaser_usb: Add support for the USBcan-II family") Link: https://lore.kernel.org/all/20220603083820.800246-4-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by:
Jimmy Assarsson <extja@kvaser.com> [mkl: remove stray netlink.h include] [mkl: keep struct can_bittiming_const kvaser_usb_flexc_bittiming_const in kvaser_usb_hydra.c] Signed-off-by:
-
Jimmy Assarsson authored
The firmware of M32C based Leaf devices expects bittiming parameters calculated for 16MHz clock. Since we use the actual clock frequency of the device, the device may end up with wrong bittiming parameters, depending on user requested parameters. This regression affects M32C based Leaf devices with non-16MHz clock. Fixes: fb12797a ("can: kvaser_usb: get CAN clock frequency from device") Link: https://lore.kernel.org/all/20220603083820.800246-3-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by:
-
Jimmy Assarsson authored
Unify and move compile-time known information into new struct kvaser_usb_driver_info, in favor of run-time checks. All Kvaser USBcanII supports listen-only mode and error counter reporting. Link: https://lore.kernel.org/all/20220603083820.800246-2-extja@kvaser.comSuggested-by:
-
Rick Lindsley authored
During a reset, there may have been transmits in flight that are no longer valid and cannot be fulfilled. Resetting and clearing the queues is insufficient; each skb also needs to be explicitly freed so that upper levels are not left waiting for confirmation of a transmit that will never happen. If this happens frequently enough, the apparent backlog will cause TCP to begin "congestion control" unnecessarily, culminating in permanently decreased throughput. Fixes: d7c0ef36 ("ibmvnic: Free and re-allocate scrqs when tx/rx scrqs change") Tested-by:
Nick Child <nnac123@linux.ibm.com> Reviewed-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
Rick Lindsley <ricklind@us.ibm.com> Signed-off-by:
-
Marc Kleine-Budde authored
In commit 1be37d3b ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") the RX path for peripheral devices was switched to RX-offload. Received CAN frames are pushed to RX-offload together with a timestamp. RX-offload is designed to handle overflows of the timestamp correctly, if 32 bit timestamps are provided. The timestamps of m_can core are only 16 bits wide. So this patch shifts them to full 32 bit before passing them to RX-offload. Link: https://lore.kernel.org/all/20220612211410.4081390-1-mkl@pengutronix.de Fixes: 1be37d3b ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") Cc: <stable@vger.kernel.org> # 5.13 Cc: Torin Cooper-Bennun <torin@maxiluxsystems.com> Reviewed-by:
Chandrasekar Ramakrishnan <rcsekar@samsung.com> Signed-off-by:
-
Marc Kleine-Budde authored
In commit df06fd67 ("can: m_can: m_can_chip_config(): enable and configure internal timestamps") the timestamping in the m_can core should be enabled. In peripheral mode, the RX'ed CAN frames, TX compete frames and error events are sorted by the timestamp. The above mentioned commit however forgot to enable the timestamping. Add the missing bits to enable the timestamp counter to the write of the Timestamp Counter Configuration register. Link: https://lore.kernel.org/all/20220612212708.4081756-1-mkl@pengutronix.de Fixes: df06fd67 ("can: m_can: m_can_chip_config(): enable and configure internal timestamps") Cc: <stable@vger.kernel.org> # 5.13 Cc: Torin Cooper-Bennun <torin@maxiluxsystems.com> Reviewed-by:
-
