static values are automatically initialized to 0
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Also add blank line after structure declarations
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yaogong replaces TCP out of order receive queue by an RB tree.

As netem already does a private skb->{next/prev/tstamp} union
with a 'struct rb_node', lets do this in a cleaner way.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yaogong Wang <wygivan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2014-11-03

This series contains updates to i40e and i40evf.

Akeem adds a check for i40e so that flow director flush and reinit are
not done when flow director is not enabled.

Mitch fixes the i40evf driver to properly handle multiple admin queue
messages, by reinit the msg_size field each time we go through the loop.
Without this, we may receive truncated messages due to the firmware
thinking we have insufficient buffer size.  Also fixes the link checking
logic to only check the carrier state if the interface is actually
open, which allows link changes to be reported correctly without spamming
the VFs.  Updates i40e to inset the VSI ID in the QTX_CTL register
when configuring queues for VMDq VSIs.

Paul adds support for 10G-base-T in i40evf.

Jesse fixes i40e where the call to irq_dynamic_disable() was turning off
the interrupt completely when trying to set ITR to 0 (for lowest
moderation).

Shannon removes debugfs dump stats function, since it was not being
kept up-to-date and was redundant with the ethtool output.  Also, scales
back the LAN MSIx usage to force queue/vector sharing and leave some
vectors for Flow Director, VMDq, etc. when there are more cores than
vectors available to the PF.  Cleans up the error reporting for
get_lump() resource tracking errors.  Also adds a check for the
debug module parameter earlier to be able to catch the early configuration
phase admin queue messages.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

this is check for dev is unnecessary, as we are already checking dev
after allocating it via alloc_netdev, and jumping to label: out
if it is NULL.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add BPF extension SKF_AD_PKTTYPE to ppc JIT to load
skb->pkt_type field.

Before:
[   88.262622] test_bpf: #11 LD_IND_NET 86 97 99 PASS
[   88.265740] test_bpf: #12 LD_PKTTYPE 109 107 PASS

After:
[   80.605964] test_bpf: #11 LD_IND_NET 44 40 39 PASS
[   80.607370] test_bpf: #12 LD_PKTTYPE 9 9 PASS

CC: Alexei Starovoitov<alexei.starovoitov@gmail.com>
CC: Michael Ellerman<mpe@ellerman.id.au>
Cc: Matt Evans <matt@ozlabs.org>
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>

v2: Added test rusults
Signed-off-by: David S. Miller <davem@davemloft.net>

Or Gerlitz says:

====================
Mellanox ethernet driver update Oct-30-2014

The 1st patch from Saeed fixes a bug in the last net-next batch where
a VF could get access to set port configuration, the next patch from Amir
fixes a race in the port VPI logic. Next are two performance patches from Ido.

The patch to add checksum complete status on GRE and such packets was
preceded with a patch that converted the driver to only use napi_gro_receive
vs. the current code which goes through napi_gro_frags on it's usual track.
Eric D. has some thoughts and suggestions on that change for which we
want to take the time and consider, so for the time being dropped that
patch and the ones that depend on it.

Changes from V0:
  - have the caller to provide the __GFP_COLD hint to the service function
  - dropped the patch that changes the GRO logic and the subsequent dependent
    patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add code to issue CONFIG_DEV "get" firmware command.

This command is used in order to obtain certain parameters used for
supporting various RX checksumming options and vxlan UDP port.

The GET operation is allowed for VFs too.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Shani Michaeli <shanim@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Needed in order to get cache cold pages (L3 flushed) for HW scatter.

Otherwise memory may flush those entries when the packet comes from
PCI, causing back pressure resulting in BW decrease.
Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When IP_ALIGN has a non zero value, hardware will write to a non aligned
address. The only reader from this address is when copying the header
from the first frag into the linear buffer (further access to the IP
address will be from the linear buffer, in which the headers are
aligned). Since the penalty of non align access by the hardware is
greater than the software memcpy, changing the frag_align to always be 0.
Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to protect set_port_type() for concurrency, as the sysfs code could
call it from mutliple contexts in parallel.

The port_mutex is not enough because we need to protect from concurrent
modification of 'info' and stopping of the port sensing work.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added wrapper to the ACCESS_REG command for handling guest HW
registers access, preventing write operations, but do allow reads.

This will prevent SRIOV guests to change port PTYS configuration,
such as speed/advertised link modes.

Fixes: adbc7ac5 ('net/mlx4_core: Introduce ACCESS_REG CMD [...]')
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_rx_action() can mask irqs a single time to transfert sd->poll_list
into a private list, for a very short duration.

Then, napi_complete() can avoid masking irqs again,
and net_rx_action() only needs to mask irq again in slow path.

This patch removes 2 couples of irq mask/unmask per typical NAPI run,
more if multiple napi were triggered.

Note this also allows to give control back to caller (do_softirq())
more often, so that other softirq handlers can be called a bit earlier,
or ksoftirqd can be wakeup earlier under pressure.

This was developed while testing an alternative to RX interrupt
mitigation to reduce latencies while keeping or improving GRO
aggregation on fast NIC.

Idea is to test napi->gro_list at the end of a napi->poll() and
reschedule one NAPI poll, but after servicing a full round of
softirqs (timers, TX, rcu, ...). This will be allowed only if softirq
is currently serviced by idle task or ksoftirqd, and resched not needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

flow_limit in struct softnet_data is only read from local cpu
and can be moved to fill a hole, reducing softnet_data size by
64 bytes on x86_64

While we are at it, move output_queue, output_queue_tailp and
completion_queue, so that rx / tx paths touch a single cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a few problems with our parsing of the MDET registers:
* Queue IDs are longer than 8 bits
* Queue IDs are absolute for the device and the base queue must be
  subtracted out.
* VF IDs are longer than 8 bits
* Use the MASK define to mask the event value, instead of the SHIFT
  define.

Change-ID: I3dc7237f480c02e1192a2a8ea782f8a02ab2a8b7
Reported-by: Marc Neustadter <marc.neustadter@intel.com>
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Patrick Lu <patrick.lu@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

We must insert the VSI ID in the QTX_CTL register when
configuring queues for VMDQ VSIs.

Change-ID: Iedfe36bd42ca0adc90a7cc2b7cf04795a98f4761
Reported-by: Marc Neustadter <marc.neustadter@intel.com>
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Patrick Lu <patrick.lu@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Check the debug module parameter earlier to be able to catch the early
configuration phase adminq messages.

Change-ID: Ic84fabd72393489bbf96042de770790a80fd8468
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Patrick Lu <patrick.lu@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Tweak and homogenize the error reporting for get_lump() resource
tracking errors.

Change-ID: I11330161cc6ad8d04371c499c63071c816171c3b
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Patrick Lu <patrick.lu@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

When there are more cores than vectors available to the PF, scale back
the LAN msix usage to force queue/vector sharing and leave some vectors
for Flow Director, VMDq, etc.

Change-ID: Ie0317732eb85ad8d851d7da7d9af86b1bf8c21ad
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Patrick Lu <patrick.lu@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The debugfs dump stats wasn't being kept up-to-date, was redundant with
the ethtool output, and didn't offer any useful additional info.  Rather
than continue trying to keep them aligned, just remove the debugfs command.

Change-ID: Id130ed9aef01c6369ab662c7b4c5ec5b1dbc5b40
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Patrick Lu <patrick.lu@intel.com>
Tested-by: Jim Young <Jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The call to irq_dynamic_disable was turning off the interrupt completely
when trying to set ITR to 0 (for lowest moderation).  Just remove the
call as setting the values to 0 later in this function will suffice.

Change-ID: I47caf1ecbe65653cf63ec833db93094cd83fd84d
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Patrick Lu <patrick.lu@intel.com>
Tested-By: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Add 10G-Base-T support in i40evf.

Change-ID: I98a1c3138d7d6572fe7903a7c1c4692cae3260d5
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Patrick Lu <patrick.lu@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

If the interface is closed, but VFs exist, current code will spam all
the VFs with link messages every second. This is because the link event
code was looking at netif_carrier_ok() without checking to see if the
interface was actually open.

Refactor the logic to only check the carrier state if the interface is
actually open. This allows link changes to be reported correctly without
spamming the VFs.

Change-ID: If136e79bb3820d21ea4e39e332e8a9604efc2b2a
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Patrick Lu <patrick.lu@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

When we receive an admin queue message, the msg_size field in the event
struct gets overwritten. Because of this, we need to reinit the field
each time we go through the loop. Without this we may receive truncated
messages due to the firmware thinking we have insufficient buffer size.

Change-ID: I21dcca5114d91365d731169965ce3ffec0e4a190
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Patrick Lu <patrick.lu@intel.com>
Tested-by: Jim Young <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

When FD_SB/ATR are not enabled, do not allow flow director flush
and reinit.

Change-ID: Iafe261c1862992981615815551abd1ed9fada0a8
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Patrick Lu <patrick.lu@intel.com>
Tested-by: <jamesx.m.young@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Conflicts:
	drivers/net/phy/marvell.c

Simple overlapping changes in drivers/net/phy/marvell.c
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull input updates from Dmitry Torokhov:
 "A bunch of fixes for minor defects reported by Coverity, a few driver
  fixups and revert of i8042.nomux change so that we are once again
  enable active MUX mode if box claims to support it"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Revert "Input: i8042 - disable active multiplexing by default"
  Input: altera_ps2 - use correct type for irq return value
  Input: altera_ps2 - write to correct register when disabling interrupts
  Input: max77693-haptic - fix potential overflow
  Input: psmouse - remove unneeded check in psmouse_reconnect()
  Input: vsxxxaa - fix code dropping bytes from queue
  Input: ims-pcu - fix dead code in ims_pcu_ofn_reg_addr_store()
  Input: opencores-kbd - fix error handling
  Input: wm97xx - adapt parameters to tosa touchscreen.
  Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544
  Input: stmpe-keypad - fix valid key line bitmask
  Input: soc_button_array - update calls to gpiod_get*()

Pull ACPI and power management fixes from Rafael Wysocki:
 "These are fixes received after my previous pull request plus one that
  has been in the works for quite a while, but its previous version
  caused problems to happen, so it's been deferred till now.

  Fixed are two recent regressions (MFD enumeration and cpufreq-dt),
  ACPI EC regression introduced in 3.17, system suspend error code path
  regression introduced in 3.15, an older bug related to recovery from
  failing resume from hibernation and a cpufreq-dt driver issue related
  to operation performance points.

  Specifics:

   - Fix a crash on r8a7791/koelsch during resume from system suspend
     caused by a recent cpufreq-dt commit (Geert Uytterhoeven).

   - Fix an MFD enumeration problem introduced by a recent commit adding
     ACPI support to the MFD subsystem that exposed a weakness in the
     ACPI core causing ACPI enumeration to be applied to all devices
     associated with one ACPI companion object, although it should be
     used for one of them only (Mika Westerberg).

   - Fix an ACPI EC regression introduced during the 3.17 cycle causing
     some Samsung laptops to misbehave as a result of a workaround
     targeted at some Acer machines.  That includes a revert of a commit
     that went too far and a quirk for the Acer machines in question.
     From Lv Zheng.

   - Fix a regression in the system suspend error code path introduced
     during the 3.15 cycle that causes it to fail to take errors from
     asychronous execution of "late" suspend callbacks into account
     (Imre Deak).

   - Fix a long-standing bug in the hibernation resume error code path
     that fails to roll back everything correcty on "freeze" callback
     errors and leaves some devices in a "suspended" state causing more
     breakage to happen subsequently (Imre Deak).

   - Make the cpufreq-dt driver disable operation performance points
     that are not supported by the VR connected to the CPU voltage plane
     with acceptable tolerance instead of constantly failing voltage
     scaling later on (Lucas Stach)"

* tag 'pm+acpi-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / EC: Fix regression due to conflicting firmware behavior between Samsung and Acer.
  Revert "ACPI / EC: Add support to disallow QR_EC to be issued before completing previous QR_EC"
  cpufreq: cpufreq-dt: Restore default cpumask_setall(policy->cpus)
  PM / Sleep: fix recovery during resuming from hibernation
  PM / Sleep: fix async suspend_late/freeze_late error handling
  ACPI: Use ACPI companion to match only the first physical device
  cpufreq: cpufreq-dt: disable unsupported OPPs

Pull PCI fixes from Bjorn Helgaas:
 "These changes, intended for v3.18, fix:

  Sysfs
    - Fix "enable" filename change (Greg Kroah-Hartman)

      An unintentional sysfs filename change in commit 5136b2da
      ("PCI: convert bus code to use dev_groups"), which appeared in
      v3.13, changed "enable" to "enabled", and this changes it back.

      Old users of "enable" are currently broken and will be helped by
      this change.  Anything that started to use "enabled" after v3.13
      will be broken by this change.  If necessary, we can add a symlink
      to make both work, but this patch doesn't do that.

  PCI device hotplug
    - Revert duplicate merge (Kamal Mostafa)

      A mistaken duplicate merge that added a check twice.  Nothing's
      broken; this just removes the unnecessary code.

  Freescale i.MX6
    - Wait for clocks to stabilize after ref_en (Richard Zhu)

      An i.MX6 clock problem that prevents mx6 nitrogen boards from booting"

* tag 'pci-v3.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Rename sysfs 'enabled' file back to 'enable'
  PCI: imx6: Wait for clocks to stabilize after ref_en
  Revert duplicate "PCI: pciehp: Prevent NULL dereference during probe"

Rusty noticed a Really Bad Bug (tm) in my NT fix.  The entry code
reads out of bounds, causing the NT fix to be unreliable.  But, and
this is much, much worse, if your stack is somehow just below the
top of the direct map (or a hole), you read out of bounds and crash.

Excerpt from the crash:

[    1.129513] RSP: 0018:ffff88001da4bf88  EFLAGS: 00010296

  2b:*    f7 84 24 90 00 00 00     testl  $0x4000,0x90(%rsp)

That read is deterministically above the top of the stack.  I
thought I even single-stepped through this code when I wrote it to
check the offset, but I clearly screwed it up.

Fixes: 8c7aa698 ("x86_64, entry: Filter RFLAGS.NT on entry from userspace")
Reported-by: Rusty Russell <rusty@ozlabs.org>
Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ext4 bugfixes from Ted Ts'o:
 "A set of miscellaneous ext4 bug fixes for 3.18"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: make ext4_ext_convert_to_initialized() return proper number of blocks
  ext4: bail early when clearing inode journal flag fails
  ext4: bail out from make_indexed_dir() on first error
  jbd2: use a better hash function for the revoke table
  ext4: prevent bugon on race between write/fcntl
  ext4: remove extent status procfs files if journal load fails
  ext4: disallow changing journal_csum option during remount
  ext4: enable journal checksum when metadata checksum feature enabled
  ext4: fix oops when loading block bitmap failed
  ext4: fix overflow when updating superblock backups after resize

Pull quota and ext3 fixes from Jan Kara.

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fs, jbd: use a more generic hash function
  quota: Properly return errors from dquot_writeback_dquots()
  ext3: Don't check quota format when there are no quota files

Pull networking fixes from David Miller:
 "A bit has accumulated, but it's been a week or so since my last batch
  of post-merge-window fixes, so...

   1) Missing module license in netfilter reject module, from Pablo.
      Lots of people ran into this.

   2) Off by one in mac80211 baserate calculation, from Karl Beldan.

   3) Fix incorrect return value from ax88179_178a driver's set_mac_addr
      op, which broke use of it with bonding.  From Ian Morgan.

   4) Checking of skb_gso_segment()'s return value was not all
      encompassing, it can return an SKB pointer, a pointer error, or
      NULL.  Fix from Florian Westphal.

      This is crummy, and longer term will be fixed to just return error
      pointers or a real SKB.

   6) Encapsulation offloads not being handled by
      skb_gso_transport_seglen().  From Florian Westphal.

   7) Fix deadlock in TIPC stack, from Ying Xue.

   8) Fix performance regression from using rhashtable for netlink
      sockets.  The problem was the synchronize_net() invoked for every
      socket destroy.  From Thomas Graf.

   9) Fix bug in eBPF verifier, and remove the strong dependency of BPF
      on NET.  From Alexei Starovoitov.

  10) In qdisc_create(), use the correct interface to allocate
      ->cpu_bstats, otherwise the u64_stats_sync member isn't
      initialized properly.  From Sabrina Dubroca.

  11) Off by one in ip_set_nfnl_get_byindex(), from Dan Carpenter.

  12) nf_tables_newchain() was erroneously expecting error pointers from
      netdev_alloc_pcpu_stats().  It only returna a valid pointer or
      NULL.  From Sabrina Dubroca.

  13) Fix use-after-free in _decode_session6(), from Li RongQing.

  14) When we set the TX flow hash on a socket, we mistakenly do so
      before we've nailed down the final source port.  Move the setting
      deeper to fix this.  From Sathya Perla.

  15) NAPI budget accounting in amd-xgbe driver was counting descriptors
      instead of full packets, fix from Thomas Lendacky.

  16) Fix total_data_buflen calculation in hyperv driver, from Haiyang
      Zhang.

  17) Fix bcma driver build with OF_ADDRESS disabled, from Hauke
      Mehrtens.

  18) Fix mis-use of per-cpu memory in TCP md5 code.  The problem is
      that something that ends up being vmalloc memory can't be passed
      to the crypto hash routines via scatter-gather lists.  From Eric
      Dumazet.

  19) Fix regression in promiscuous mode enabling in cdc-ether, from
      Olivier Blin.

  20) Bucket eviction and frag entry killing can race with eachother,
      causing an unlink of the object from the wrong list.  Fix from
      Nikolay Aleksandrov.

  21) Missing initialization of spinlock in cxgb4 driver, from Anish
      Bhatt.

  22) Do not cache ipv4 routing failures, otherwise if the sysctl for
      forwarding is subsequently enabled this won't be seen.  From
      Nicolas Cavallari"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (131 commits)
  drivers: net: cpsw: Support ALLMULTI and fix IFF_PROMISC in switch mode
  drivers: net: cpsw: Fix broken loop condition in switch mode
  net: ethtool: Return -EOPNOTSUPP if user space tries to read EEPROM with lengh 0
  stmmac: pci: set default of the filter bins
  net: smc91x: Fix gpios for device tree based booting
  mpls: Allow mpls_gso to be built as module
  mpls: Fix mpls_gso handler.
  r8152: stop submitting intr for -EPROTO
  netfilter: nft_reject_bridge: restrict reject to prerouting and input
  netfilter: nft_reject_bridge: don't use IP stack to reject traffic
  netfilter: nf_reject_ipv6: split nf_send_reset6() in smaller functions
  netfilter: nf_reject_ipv4: split nf_send_reset() in smaller functions
  netfilter: nf_tables_bridge: update hook_mask to allow {pre,post}routing
  drivers/net: macvtap and tun depend on INET
  drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets
  drivers/net: Disable UFO through virtio
  net: skb_fclone_busy() needs to detect orphaned skb
  gre: Use inner mac length when computing tunnel length
  mlx4: Avoid leaking steering rules on flow creation error flow
  net/mlx4_en: Don't attempt to TX offload the outer UDP checksum for VXLAN
  ...

Pull sparc update from David Miller:
 "Two changes:

  1) It makes no sense to execute a VTOC partition table request in the
     Sun virtual block device driver and fail to load if it doesn't
     succeed because a) we don't use the result at all and b) it won't
     succeed if there is an EFI partition on the disk, for example.

     We read the partition table via the normal means in the block layer
     anyways, so this is really completely useless, so just remove it.

     From Dwight Engen.

  2) Hook up new bpf system call"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sunvdc: don't call VD_OP_GET_VTOC
  sparc: Hook up bpf system call.

Pull Microblaze updates from Michal Simek:
 - wire-up new bpf syscall
 - fix PCI bug
 - fix Kconfig warning

* tag 'microblaze-3.18-rc3' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Wire up bpf syscall
  microblaze: Fix IO space breakage after of_pci_range_to_resource() change
  microblaze: Fix missing NR_CPUS in menuconfig