The ES8316 only has a single (amplified) output. The ES8316 appnote showing
the intended usage uses a jack-receptacle which physically disconnects the
speakers from the output when a jack is plugged in.

But all 3 devices using the es8316 which I have (2 Cherry Trail devices and
one Bay Trail CR device), use an analog mux to disconnect the speakers,
driven by a GPIO.

This commit adds support for this, modelling this as a separate speaker
widget / dapm pin-switch which sets the mux to drive the speakers when
selected.

The intend is for userspace to use the recently added jack-detect support
and then automatically select either the Headphone or Speaker output based
on that.

Note this commit includes a workaround for an ACPI table bug which is
present on 2 of the 3 devices I have, see the added comment in the code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Hookup the jack-detect support added to the codec driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support for having the codec connected to SSP0 instead of SSP2. This
is controlled through a new quirk parameter, similar to how this is done
in the bytcr_rt5640 and bytcr_rt5651 machine drivers.

Bay Trail CR (cost reduced) SoCs do not have an SSP2, so we default to SSP0
there.

Note the SPP0 quirk gets BIT(16) because bits 0-15 are reserved for non
boolean quirks like the input-map added in a later commit in this series.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Some minor refactoring:
1) Group the code setting the card dev and prive pointers together with
   registering the card
2) Properly put the comment about registering the card at the place where
   we actually register the card and add a new comment for getting the clk
3) Add a struct device *dev helper variable (this will be used more in
   follow up commits)
4) Reword error message to have the same "foo failed: %d" wording as others
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

For lack of a better (non-random) way of sorting includes more and more
files in the kernel are moving over to sorting the includes alphabetically.

Move the bytcht_es8316 driver over to this sorting before we add a
bunch of more includes.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Export the DAC functionality to mix left + right together and then output
the same (mixed) signal on both outputs.

Various (x86) tablets with an ES8316 codec use a single speaker
connected between the headhpone LOUT and ROUT pins, expecting the output
to be in a mono differential mode. Presumably this is done to use the
power of both the left and right outputs to allow the speaker to be
louder.

The ES8316 codec does not have a differential output mode, but we can
emulate this by making both channels output the same through the mono mix
switch, combined with setting the Playback Polarity control to "R Invert",
which applias a 180 degrees phase inversion to the right channel.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Adding jack-detect support may seem weird for a codec with only
a single output, but it is necessary. The ES8316 appnote showing
the intended usage uses a jack-receptacle which physically disconnects
the speakers from the output when a jack is plugged in.

But all 3 devices using the es8316 which I have (2 Cherry Trail
devices and one Bay Trail CR device), use an analog mux to disconnect
the speakers, driven by a GPIO. In order to enable/disable the speakers
at the right time, we need jack-detect.

The same goes for the microphone where we must correctly set the mux
for the single ADC to either the internal or the headset microphone.

All devices I have support the es8316's builtin jack-detect functionality.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Currently, if platform_get_irq_byname() fails, the returned error
turns into a huge value, once it is being store into a variable
of type unsigned int, hence never actually reporting any error
and causing unexpected behavior when using the values stored
in aud_drv_data->s2mm_irq and aud_drv_data->mm2s_irq.

Fix this by changing the type of variables s2mm_irq and mm2s_irq in
structure xlnx_pcm_drv_data from unsigned int to int.

Addresses-Coverity-ID: 1476096 ("Unsigned compared against 0")
Fixes: 796175a94a7f ("ASoC: xlnx: add pcm formatter platform driver")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds reset and precharge in shutdown of PCM device.

ACODEC goes to silence if we change Fs to 44.1kHz from 48kHz. This
workaround seems to work but I don't know this workaround is correct
sequence or not for ACODEC.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support for audio CODEC core of rk3328.

Rockchip does not publish detail specification of this core
but driver source code is opened on their GitHub repository.
  https://github.com/rockchip-linux/kernel

So I ported this code to linux-next and added some trivial fixes.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current simple-card is using asoc_simple_card_xxx() for
function / data naming. Because of this long prefix, it is easy to be
80 character over.
Let's reduce prefix from asoc_simple_card_xxx() to simple_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current simple-card is parsing DAI link for both "normal sound" and
"DPCM sound". On this driver, it needs to count and parse
DAIs/Links/Codec Conf from each links.
Then, counting/parsing link loop are very similar, but using different
implementation. Because of this background, the link loop code is very
mysterious. Mystery code will be trouble in the future.

This patch cleanups the code by using asoc_simple_card_for_each_link()
which judges normal link / DPCM link.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current simple-card is parsing DAI link for both "normal sound" and
"DPCM sound". On this driver, it needs to count and parse
DAIs/Links/Codec Conf from each links.
Then, counting/parsing link loop are very similar, but using different
implementation. Because of this background, the link loop code is very
mysterious. Mystery code will be trouble in the future.

This patch adds/modifies counting and parsing function for
"normal sound" and "DPCM sound", and call it from link loop.
This is prepare for cleanup DAI link loop method.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current simple-card is parsing DAI link for both "normal sound" and
"DPCM sound". On this driver, it needs to count and parse
DAIs/Links/Codec Conf from each links.
Then, counting/parsing link loop are very similar, but using different
implementation. Because of this background, the link loop code is very
mysterious. Mystery code will be trouble in the future.

To preparing cleanup code, this patch adds link_info which handles
number of DAIs/Links/Codec Conf, and CPU/Codec turn.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

simple-card is now supporting normal sound and DPCM sound.
For DPCM sound, original sound card (= simple-scu-card) had been
supported 1 CPU : 1 Codec connection which uses hw_params_fixup()
for convert-rate/channel.
But, merged simple-card is completely forgeting about it.

This patch re-support it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

simple-card is now supporting normal sound and DPCM sound.
For DPCM sound, original sound card (= simple-scu-card) had been
supported 1 CPU : 1 Codec connection which uses hw_params_fixup()
for convert-rate/channel.
But, merged simple-card is completely forgeting about it.

To re-support 1 CPU : 1 Codec DPCM for hw_params_fixup(),
it need to judge whether it is DPCM by checking convert-rate/channel.
For this purpose, this patch adds asoc_simple_card_get_conversion()
as preparation
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current audio-graph-card is using asoc_graph_card_xxx() for
function / data naming. Because of this long prefix, it is easy to be
80 character over.
Let's reduce prefix from asoc_graph_card_xxx() to graph_xxx().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current audio-graph-card is parsing DAI link for both "normal sound" and
"DPCM sound". On this driver, it needs to count and parse
DAIs/Links/Codec Conf from each links.
Then, counting/parsing link loop are very similar, but using different
implementation. Because of this background, the link loop code is very
mysterious. Mystery code will be trouble in the future.

This patch cleanups the code by using asoc_graph_card_for_each_link()
which judges normal link / DPCM link.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current audio-graph-card is parsing DAI link for both "normal sound" and
"DPCM sound". On this driver, it needs to count and parse
DAIs/Links/Codec Conf from each links.
Then, counting/parsing link loop are very similar, but using different
implementation. Because of this background, the link loop code is very
mysterious. Mystery code will be trouble in the future.

This patch adds/modifies counting and parsing function for
"normal sound" and "DPCM sound", and call it from link loop.
This is prepare for cleanup DAI link loop method.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current audio-graph-card is parsing DAI link for both "normal sound" and
"DPCM sound". On this driver, it needs to count and parse
DAIs/Links/Codec Conf from each links.
Then, counting/parsing link loop are very similar, but using different
implementation. Because of this background, the link loop code is very
mysterious. Mystery code will be trouble in the future.

To preparing cleanup code, this patch adds link_info which handles
number of DAIs/Links/Codec Conf, and CPU/Codec turn.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

audio-graph-card is now supporting normal sound and DPCM sound.
For DPCM sound, original sound card (= audio-graph-scu) had been
supported 1 CPU : 1 Codec connection which uses hw_params_fixup()
for convert-rate/channel.
But, merged audio-graph-card is completely forgeting about it.

This patch re-support it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Enable audio formatter driver build.
Signed-off-by: Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The audio formatter PL IP supports DMA of two streams -
mm2s and s2mm for playback and capture respectively. Apart from
DMA, IP also does conversions like PCM to AES and viceversa.
This patch adds DMA component driver for the IP.
Signed-off-by: Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Added documentation for audio formatter IP core DT bindings.
Signed-off-by: Maruthi Srinivas Bayyavarapu <maruthi.srinivas.bayyavarapu@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

It is already merged into simple-card.
simple-scu-card is no longer needed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

It is already merged into simple-card.
simple-scu-card is no longer needed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

It is already merged into audio-graph-card.
audio-graph-scu-card is no longer needed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

It is already merged into audio-graph-card.
audio-graph-scu-card is no longer needed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

audio-graph-card is now supporting normal sound and DPCM sound.
For DPCM sound, original sound card (= audio-graph-scu) had been
supported 1 CPU : 1 Codec connection which uses hw_params_fixup()
for convert-rate/channel.
But, merged audio-graph-card is completely forgeting about it.

To re-support 1 CPU : 1 Codec DPCM for hw_params_fixup(),
it need to judge whether it is DPCM by checking convert-rate/channel.
For this purpose, this patch adds asoc_graph_card_get_conversion()
as preparation
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

We will get DAI ID from "reg" property if it has on DT, otherwise get
it by counting port/endpoint.

But in below case, we need to get DAI ID = 0 via port reg = <0>, but
current implementation returns ID = 1, because it can't judge ID = 0 was
from "non reg" or "reg = <0>".
Thus, it will count port/endpoint number as "non reg" case.

of_graph_parse_endpoint() implementation itself is not a problem,
but because asoc_simple_card_get_dai_id() need to count port/endpoint
number when "non reg" case, it need to know ID = 0 was from
"non reg" or "reg = <0>".
This patch fix this issue.

	port {
		reg = <0>;
		xxxx: endpoint@0 {
		};
=>		xxxx: endpoint@1 {
		};
	};
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Fix Sparse warnings with two machine drivers which weren't updated
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Detected with Coccinelle
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Detected with Coccinelle
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Detected with Coccinelle
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Detected with Coccinelle
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Detected with Coccinelle
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Detected with Coccinelle

skl-messages.c:419:5-32: WARNING: Comparison to bool
skl-pcm.c:1426:6-33: WARNING: Comparison to bool
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Detected with Coccinelle

sound/soc/intel/skylake/skl-topology.c:3106:16-20: WARNING: casting
value returned by memory allocation function to (char *) is useless.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

MCLK input is needed when accessing any register after enabling SYSCLK.

This also fixes imbalance of clk_enable / clk_disable when transitioning
between ON -> STANDBY -> ON bias levels.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>