- 02 Jun, 2010 32 commits
-
-
Sujith authored
This patch removes a large chunk of code dealing with rate management within the driver and simplifying things by removing the hacky method of calculating HT changes. A subsequent patch would fix this by just using BSS_CHANGED_HT from mac80211. Signed-off-by:
Sujith <Sujith.Manoharan@atheros.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Sujith authored
Update from internal systems engineering team. Signed-off-by:
-
Julia Lawall authored
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by:
-
Julia Lawall authored
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by:
Zhu Yi <yi.zhu@intel.com> Signed-off-by:
-
Julia Lawall authored
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by:
-
Julia Lawall authored
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by:
-
Julia Lawall authored
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
-
Julia Lawall authored
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by:
-
Julia Lawall authored
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by:
Kalle Valo <kvalo@adurom.com> Signed-off-by:
-
Julia Lawall authored
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Dan Carpenter authored
Changed -EINVAL to -EFAULT if copy_to_user() failed. Changed 0 to -ENOMEM if allocations failed. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
The snprintf() function returns the number of bytes that *would* have been written (not counting the NULL terminator) and that can potentally be more than the size of the buffer. In this patch if there were one liners where string clearly fits into the buffer, then I changed snprintf to sprintf(). It's confusing to use the return value of snprintf() as a limitter without verifying that it's smaller than size. This is what initially caught my attention here. If we use the return value of sprintf() instead future code auditors will assume we've verified that it fits already. Also I did find some places where it made sense to use the return value after we've verified that it is smaller than the buffer size. Finally the read_file_rcstat() function added an explicit NULL terminator before calling snprintf(). That's unnecessary because snprintf() will add the null terminator automatically. Signed-off-by:
-
Ming Lei authored
For edma, we should use DMA_BIDIRECTIONAL, or else use DMA_FROM_DEVICE. Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Signed-off-by:
-
Amitkumar Karwar authored
In suspend() host sleep is activated using already configured host sleep parameters through wol command, and in resume() host sleep is cancelled. Earlier priv->fw_ready flag used to reset and set in suspend and resume handler respectively. Since after suspend only host goes into sleep state and firmware is always ready, those changes in flag state are removed. Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
-
Juuso Oikarinen authored
This patch adds support for NVS files with 5GHz band parameters. The change is done in a backward compatible manner - if 11a is not enabled in the driver, the driver will allow also old NVS files to be loaded. Signed-off-by:
Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by:
Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by:
-
Juuso Oikarinen authored
This patch updates the handling of the NVS file INI-section, trying to make it slightly more generic, and exposing the parameters being set. This is done in preparation for 5GHz parameters. Signed-off-by:
-
Sujith authored
This is the maximum supported by the firmware. Signed-off-by:
-
Sujith authored
There is no need to determine the HW queue for each packet that is transmitted. The endpoint can be chosen directly based on the queue type that mac80211 sends down. Signed-off-by:
-
Sujith authored
This patch initializes the beacon and CAB HW queues when the driver is loaded. Signed-off-by:
-
Sujith authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
This patch enables short GI rx at all rates and tx at mcs15 for 20 Mhz channel width also. Signed-off-by:
Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by:
-
Julia Lawall authored
Use kzalloc rather than the combination of kmalloc and memset. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x,size,flags; statement S; @@ -x = kmalloc(size,flags); +x = kzalloc(size,flags); if (x == NULL) S -memset(x, 0, size); // </smpl> Signed-off-by:
-
Luis R. Rodriguez authored
This enables the baseband watchdog events for the AR9003 family on ath9k. Upon an a baseband watchdog interrupt we reset the hardware, this should address corner case conditions where normal operation can stall. Enable ATH_DBG_RESET to be able to review details of the bb watchdog interrupt once it happens. If you're curious how often this happens just grep the debugfs interrupt file. Cc: Sam Ng <sam.ng@atheros.com> Cc: Paul Shaw <paul.shaw@atheros.com> Cc: Don Breslin <don.breslin@atheros.com> Cc: Cliff Holden <cliff.holden@atheros.com Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com Signed-off-by: -
Luis R. Rodriguez authored
The baseband watchdog will monitor blocks of the baseband through timers and will issue an interrupt when things are detected to be stalled. It is only available on the AR9003 family. Cc: Sam Ng <sam.ng@atheros.com> Cc: Paul Shaw <paul.shaw@atheros.com> Cc: Don Breslin <don.breslin@atheros.com> Cc: Cliff Holden <cliff.holden@atheros.com Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
-
Felix Fietkau authored
Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Gertjan van Wingerde authored
This allows rt2x00debug_dump_frame to be used from everywhere. This is preparation for beacon writing clean ups. Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Acked-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Ohad Ben-Cohen authored
Make it possible to use wl1271's SDIO interface on non-ARM platforms. Fully tested on a x86 platform, compile-tested on ARM. Signed-off-by:
Ohad Ben-Cohen <ohad@wizery.com> Acked-by:
-
Luis R. Rodriguez authored
Signed-off-by:
-
Luis R. Rodriguez authored
The checksums of the initvals are: initvals -f ar9003-2p2 0x00000000c2bfa7d5 ar9300_2p2_radio_postamble 0x00000000ada2b114 ar9300Modes_lowest_ob_db_tx_gain_table_2p2 0x00000000e0bc2c84 ar9300Modes_fast_clock_2p2 0x00000000056eaf74 ar9300_2p2_radio_core 0x0000000000000000 ar9300Common_rx_gain_table_merlin_2p2 0x0000000078658fb5 ar9300_2p2_mac_postamble 0x0000000023235333 ar9300_2p2_soc_postamble 0x0000000054d41904 ar9200_merlin_2p2_radio_core 0x000000008475a084 ar9300_2p2_baseband_postamble 0x000000009aaafd90 ar9300_2p2_baseband_core 0x000000003df9a326 ar9300Modes_high_power_tx_gain_table_2p2 0x000000001cfba124 ar9300Modes_high_ob_db_tx_gain_table_2p2 0x0000000011302700 ar9300Common_rx_gain_table_2p2 0x00000000a9a2b114 ar9300Modes_low_ob_db_tx_gain_table_2p2 0x00000000a9d66d40 ar9300_2p2_mac_core 0x000000001e1d0800 ar9300Common_wo_xlna_rx_gain_table_2p2 0x00000000a0c531c8 ar9300_2p2_soc_preamble 0x00000000292e2544 ar9300PciePhy_pll_on_clkreq_disable_L1_2p2 0x000000002d3e2544 ar9300PciePhy_clkreq_enable_L1_2p2 0x00000000293e2544 ar9300PciePhy_clkreq_disable_L1_2p2 Signed-off-by:
-
FUJITA Tomonori authored
The DMA API is preferred. No functional change. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by:
-
John W. Linville authored
Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
-
- 28 May, 2010 5 commits
-
-
Christoph Fritz authored
Ethernet driver b44 does register ssb by it's pcihost_wrapper and doesn't set ssb_chipcommon. A check on this value introduced with commit d53cdbb9 and ea2db495 triggers: BUG: unable to handle kernel NULL pointer dereference at 00000010 IP: [<c1266c36>] ssb_is_sprom_available+0x16/0x30 Signed-off-by:
Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by:
-
Johannes Berg authored
sparse correctly complains that __ieee80211_get_channel_mode is not static. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Prarit Bhargava authored
Fixes: drivers/net/wireless/libertas/rx.c: In function process_rxed_802_11_packet: drivers/net/wireless/libertas/rx.c:354: error: radiotap_hdr.flags may be used uninitialized in this function Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
-
Vasanthakumar Thiagarajan authored
This bug was introduced by the following commit Author: Vasanthakumar Thiagarajan <vasanth@atheros.com> Date: Thu Apr 15 17:38:46 2010 -0400 ath9k: Remove ATH9K_TX_SW_ABORTED and introduce a bool for this purpose Wrong buffer is checked for bf_tx_aborted field in ath_tx_num_badfrms(), this may result in a rate scaling with wrong feedback (number of unacked frames in this case). It is the last one in the chain of buffers for an aggregate frame that should be checked. Also it misses the initialization of this field in the buffer, this may lead to a situation where we stop the sw retransmission of failed subframes associated to this buffer. Signed-off-by:
-
Justin P. Mattock authored
ath_print in xmit.c should say "Reseting hardware" instead of Resetting HAL!(since HAL is being fazed out). dmesg shows: [ 8660.899624] ath: Failed to stop TX DMA in 100 msec after killing last frame [ 8660.899676] ath: Unable to stop TxDMA. Reset HAL! Signed-off-by:
Justin P. Mattock <justinmattock@gmail.com> Signed-off-by:
-
- 26 May, 2010 2 commits
-
-
Christian Lamparter authored
Commit "ar9170: wait for asynchronous firmware loading" introduced a bug, which is triggered by fatal errors while the driver is initializing the device. BUG: unable to handle kernel paging request at 6b6b6bf7 IP: [<c117b567>] kobject_put+0x7/0x70 *pde = 00000000 Oops: 0000 [#1] PREEMPT last sysfs file: /sys/devices/platform/hdaps/position Modules linked in: ar9170usb [...] Pid: 6246, comm: firmware/ar9170 Not tainted 2.6.34-wl #54 EIP: 0060:[<c117b567>] EFLAGS: 00010206 CPU: 0 EIP is at kobject_put+0x7/0x70 EAX: 6b6b6bd7 EBX: f4d3d0e0 ECX: f5ba9124 EDX: f6af2a7c ESI: 00000000 EDI: f4d3d0e0 EBP: 00000000 ESP: f5e98f9c DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 Process firmware/ar9170 (pid: 6246) Stack: c12532ed 00000246 f5bfaa70 f8487353 f4d3d0e0 Call Trace: [<c12532ed>] ? device_release_driver+0x1d/0x30 [<f8487353>] ? ar9170_usb_firmware_failed+0x43/0x70 [ar9170usb] [<c125983c>] ? request_firmware_work_func+0x2c/0x70 [<c1259810>] ? request_firmware_work_func+0x0/0x70 [<c10413f4>] ? kthread+0x74/0x80 [<c1041380>] ? kthread+0x0/0x80 [<c1003136>] ? kernel_thread_helper+0x6/0x10 Code: 40 d3 f2 ff 85 c0 89 c3 74 0a ba 44 86 4c c1 e8 [...] EIP: [<c117b567>] kobject_put+0x7/0x70 SS:ESP 0068:f5e98f9c CR2: 000000006b6b6bf7 ---[ end trace e81abb992434b410 ]--- Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
John W. Linville authored
This reverts commit 663cb47c. This patch was merged out of the proper order, so instead of fixing a problem with a prior (unmerged) patch, it creates one. Ooops! Signed-off-by:
-
- 25 May, 2010 1 commit
-
-
Felix Fietkau authored
With VEOL, Beacon transmission in ad-hoc does not currently work. I believe for larger ad-hoc networks, VEOL is too unreliable, as it can get beacon transmissions stuck during synchronization. Use SWBA based beacon trasmission similar to AP mode instead. Signed-off-by:
Benoit Papillault <benoit.papillault@free.fr> Signed-off-by:
-
