plat->phy_interface is unsigned integer, so the condition
can't be less than zero and the warning will never printed.

Fixes: 30bba69d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The goal of commit df789fe7 ("ipv6: Provide ipv6 version of
"disable_policy" sysctl") was to have the disable_policy from ipv4
available on ipv6.
However, it's not exactly the same mechanism. On IPv4, all packets coming
from an interface, which has disable_policy set, bypass the policy check.
For ipv6, this is done only for local packets, ie for packets destinated to
an address configured on the incoming interface.

Let's align ipv6 with ipv4 so that the 'disable_policy' sysctl has the same
effect for both protocols.

My first approach was to create a new kind of route cache entries, to be
able to set DST_NOPOLICY without modifying routes. This would have added a
lot of code. Because the local delivery path is already handled, I choose
to focus on the forwarding path to minimize code churn.

Fixes: df789fe7 ("ipv6: Provide ipv6 version of "disable_policy" sysctl")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently when the call to otx2_mbox_alloc_msg_cgx_mac_addr_update fails
the error return variable rc is being assigned -ENOMEM and does not
return early. rc is then re-assigned and the error case is not handled
correctly. Fix this by returning -ENOMEM rather than assigning rc.

Addresses-Coverity: ("Unused value")
Fixes: 79d2be38 ("octeontx2-pf: offload DMAC filters to CGX/RPM block")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Taehee Yoo says:

====================
net: fix bonding ipsec offload problems

This series fixes some problems related to bonding ipsec offload.

The 1, 5, and 8th patches are to add a missing rcu_read_lock().
The 2nd patch is to add null check code to bond_ipsec_add_sa.
When bonding interface doesn't have an active real interface, the
bond->curr_active_slave pointer is null.
But bond_ipsec_add_sa() uses that pointer without null check.
So that it results in null-ptr-deref.
The 3 and 4th patches are to replace xs->xso.dev with xs->xso.real_dev.
The 6th patch is to disallow to set ipsec offload if a real interface
type is bonding.
The 7th patch is to add struct bond_ipsec to manage SA.
If bond mode is changed, or active real interface is changed, SA should
be removed from old current active real interface then it should be added
to new active real interface.
But it can't, because it doesn't manage SA.
The 9th patch is to fix incorrect return value of bond_ipsec_offload_ok().

v1 -> v2:
 - Add 9th patch.
 - Do not print warning when there is no SA in bond_ipsec_add_sa_all().
 - Add comment for ipsec_lock.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

bond_ipsec_offload_ok() is called to check whether the interface supports
ipsec offload or not.
bonding interface support ipsec offload only in active-backup mode.
So, if a bond interface is not in active-backup mode, it should return
false but it returns true.

Fixes: a3b658cf ("bonding: allow xfrm offload setup post-module-load")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To dereference bond->curr_active_slave, it uses rcu_dereference().
But it and the caller doesn't acquire RCU so a warning occurs.
So add rcu_read_lock().

Splat looks like:
WARNING: suspicious RCU usage
5.13.0-rc6+ #1179 Not tainted
drivers/net/bonding/bond_main.c:571 suspicious
rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ping/974:
 #0: ffff888109e7db70 (sk_lock-AF_INET){+.+.}-{0:0},
at: raw_sendmsg+0x1303/0x2cb0

stack backtrace:
CPU: 2 PID: 974 Comm: ping Not tainted 5.13.0-rc6+ #1179
Call Trace:
 dump_stack+0xa4/0xe5
 bond_ipsec_offload_ok+0x1f4/0x260 [bonding]
 xfrm_output+0x179/0x890
 xfrm4_output+0xfa/0x410
 ? __xfrm4_output+0x4b0/0x4b0
 ? __ip_make_skb+0xecc/0x2030
 ? xfrm4_udp_encap_rcv+0x800/0x800
 ? ip_local_out+0x21/0x3a0
 ip_send_skb+0x37/0xa0
 raw_sendmsg+0x1bfd/0x2cb0

Fixes: 18cb261a ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding has been supporting ipsec offload.
When SA is added, bonding just passes SA to its own active real interface.
But it doesn't manage SA.
So, when events(add/del real interface, active real interface change, etc)
occur, bonding can't handle that well because It doesn't manage SA.
So some problems(panic, UAF, refcnt leak)occur.

In order to make it stable, it should manage SA.
That's the reason why struct bond_ipsec is added.
When a new SA is added to bonding interface, it is stored in the
bond_ipsec list. And the SA is passed to a current active real interface.
If events occur, it uses bond_ipsec data to handle these events.
bond->ipsec_list is protected by bond->ipsec_lock.

If a current active real interface is changed, the following logic works.
1. delete all SAs from old active real interface
2. Add all SAs to the new active real interface.
3. If a new active real interface doesn't support ipsec offload or SA's
option, it sets real_dev to NULL.

Fixes: 18cb261a ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding interface can be nested and it supports ipsec offload.
So, it allows setting the nested bonding + ipsec scenario.
But code does not support this scenario.
So, it should be disallowed.

interface graph:
bond2
   |
bond1
   |
eth0

The nested bonding + ipsec offload may not a real usecase.
So, disallowing this scenario is fine.

Fixes: 18cb261a ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To dereference bond->curr_active_slave, it uses rcu_dereference().
But it and the caller doesn't acquire RCU so a warning occurs.
So add rcu_read_lock().

Test commands:
    ip netns add A
    ip netns exec A bash
    modprobe netdevsim
    echo "1 1" > /sys/bus/netdevsim/new_device
    ip link add bond0 type bond
    ip link set eth0 master bond0
    ip link set eth0 up
    ip link set bond0 up
    ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \
transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \
0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \
dst 14.0.0.70/24 proto tcp offload dev bond0 dir in
    ip x s f

Splat looks like:
=============================
WARNING: suspicious RCU usage
5.13.0-rc3+ #1168 Not tainted
-----------------------------
drivers/net/bonding/bond_main.c:448 suspicious rcu_dereference_check()
usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
2 locks held by ip/705:
 #0: ffff888106701780 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{3:3},
at: xfrm_netlink_rcv+0x59/0x80 [xfrm_user]
 #1: ffff8880075b0098 (&x->lock){+.-.}-{2:2},
at: xfrm_state_delete+0x16/0x30

stack backtrace:
CPU: 6 PID: 705 Comm: ip Not tainted 5.13.0-rc3+ #1168
Call Trace:
 dump_stack+0xa4/0xe5
 bond_ipsec_del_sa+0x16a/0x1c0 [bonding]
 __xfrm_state_delete+0x51f/0x730
 xfrm_state_delete+0x1e/0x30
 xfrm_state_flush+0x22f/0x390
 xfrm_flush_sa+0xd8/0x260 [xfrm_user]
 ? xfrm_flush_policy+0x290/0x290 [xfrm_user]
 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user]
 ? rcu_read_lock_sched_held+0x91/0xc0
 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user]
 ? find_held_lock+0x3a/0x1c0
 ? mutex_lock_io_nested+0x1210/0x1210
 ? sched_clock_cpu+0x18/0x170
 netlink_rcv_skb+0x121/0x350
[ ... ]

Fixes: 18cb261a ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two pointers in struct xfrm_state_offload, *dev, *real_dev.
These are used in callback functions of struct xfrmdev_ops.
The *dev points whether bonding interface or real interface.
If bonding ipsec offload is used, it points bonding interface If not,
it points real interface.
And real_dev always points real interface.
So, ixgbevf should always use real_dev instead of dev.
Of course, real_dev always not be null.

Test commands:
    ip link add bond0 type bond
    #eth0 is ixgbevf interface
    ip link set eth0 master bond0
    ip link set bond0 up
    ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \
transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \
0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \
dst 14.0.0.70/24 proto tcp offload dev bond0 dir in

Splat looks like:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 6 PID: 688 Comm: ip Not tainted 5.13.0-rc3+ #1168
RIP: 0010:ixgbevf_ipsec_find_empty_idx+0x28/0x1b0 [ixgbevf]
Code: 00 00 0f 1f 44 00 00 55 53 48 89 fb 48 83 ec 08 40 84 f6 0f 84 9c
00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02
84 c0 74 08 3c 01 0f 8e 4c 01 00 00 66 81 3b 00 04 0f
RSP: 0018:ffff8880089af390 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffff8880089af4f8 R08: 0000000000000003 R09: fffffbfff4287e11
R10: 0000000000000001 R11: ffff888005de8908 R12: 0000000000000000
R13: ffff88810936a000 R14: ffff88810936a000 R15: ffff888004d78040
FS:  00007fdf9883a680(0000) GS:ffff88811a400000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055bc14adbf40 CR3: 000000000b87c005 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 ixgbevf_ipsec_add_sa+0x1bf/0x9c0 [ixgbevf]
 ? rcu_read_lock_sched_held+0x91/0xc0
 ? ixgbevf_ipsec_parse_proto_keys.isra.9+0x280/0x280 [ixgbevf]
 ? lock_acquire+0x191/0x720
 ? bond_ipsec_add_sa+0x48/0x350 [bonding]
 ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0
 ? rcu_read_lock_held+0x91/0xa0
 ? rcu_read_lock_sched_held+0xc0/0xc0
 bond_ipsec_add_sa+0x193/0x350 [bonding]
 xfrm_dev_state_add+0x2a9/0x770
 ? memcpy+0x38/0x60
 xfrm_add_sa+0x2278/0x3b10 [xfrm_user]
 ? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user]
 ? register_lock_class+0x1750/0x1750
 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user]
 ? rcu_read_lock_sched_held+0x91/0xc0
 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user]
 ? find_held_lock+0x3a/0x1c0
 ? mutex_lock_io_nested+0x1210/0x1210
 ? sched_clock_cpu+0x18/0x170
 netlink_rcv_skb+0x121/0x350
[ ... ]

Fixes: 272c2330 ("xfrm: bail early on slave pass over skb")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two pointers in struct xfrm_state_offload, *dev, *real_dev.
These are used in callback functions of struct xfrmdev_ops.
The *dev points whether bonding interface or real interface.
If bonding ipsec offload is used, it points bonding interface If not,
it points real interface.
And real_dev always points real interface.
So, netdevsim should always use real_dev instead of dev.
Of course, real_dev always not be null.

Test commands:
    ip netns add A
    ip netns exec A bash
    modprobe netdevsim
    echo "1 1" > /sys/bus/netdevsim/new_device
    ip link add bond0 type bond mode active-backup
    ip link set eth0 master bond0
    ip link set eth0 up
    ip link set bond0 up
    ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \
transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \
0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \
dst 14.0.0.70/24 proto tcp offload dev bond0 dir in

Splat looks like:
BUG: spinlock bad magic on CPU#5, kworker/5:1/53
 lock: 0xffff8881068c2cc8, .magic: 11121314, .owner: <none>/-1,
.owner_cpu: -235736076
CPU: 5 PID: 53 Comm: kworker/5:1 Not tainted 5.13.0-rc3+ #1168
Workqueue: events linkwatch_event
Call Trace:
 dump_stack+0xa4/0xe5
 do_raw_spin_lock+0x20b/0x270
 ? rwlock_bug.part.1+0x90/0x90
 _raw_spin_lock_nested+0x5f/0x70
 bond_get_stats+0xe4/0x4c0 [bonding]
 ? rcu_read_lock_sched_held+0xc0/0xc0
 ? bond_neigh_init+0x2c0/0x2c0 [bonding]
 ? dev_get_alias+0xe2/0x190
 ? dev_get_port_parent_id+0x14a/0x360
 ? rtnl_unregister+0x190/0x190
 ? dev_get_phys_port_name+0xa0/0xa0
 ? memset+0x1f/0x40
 ? memcpy+0x38/0x60
 ? rtnl_phys_switch_id_fill+0x91/0x100
 dev_get_stats+0x8c/0x270
 rtnl_fill_stats+0x44/0xbe0
 ? nla_put+0xbe/0x140
 rtnl_fill_ifinfo+0x1054/0x3ad0
[ ... ]

Fixes: 272c2330 ("xfrm: bail early on slave pass over skb")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If bond doesn't have real device, bond->curr_active_slave is null.
But bond_ipsec_add_sa() dereferences bond->curr_active_slave without
null checking.
So, null-ptr-deref would occur.

Test commands:
    ip link add bond0 type bond
    ip link set bond0 up
    ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi \
0x07 mode transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \
0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \
dst 14.0.0.70/24 proto tcp offload dev bond0 dir in

Splat looks like:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 4 PID: 680 Comm: ip Not tainted 5.13.0-rc3+ #1168
RIP: 0010:bond_ipsec_add_sa+0xc4/0x2e0 [bonding]
Code: 85 21 02 00 00 4d 8b a6 48 0c 00 00 e8 75 58 44 ce 85 c0 0f 85 14
01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02
00 0f 85 fc 01 00 00 48 8d bb e0 02 00 00 4d 8b 2c 24 48
RSP: 0018:ffff88810946f508 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff88810b4e8040 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffffffff8fe34280 RDI: ffff888115abe100
RBP: ffff88810946f528 R08: 0000000000000003 R09: fffffbfff2287e11
R10: 0000000000000001 R11: ffff888115abe0c8 R12: 0000000000000000
R13: ffffffffc0aea9a0 R14: ffff88800d7d2000 R15: ffff88810b4e8330
FS:  00007efc5552e680(0000) GS:ffff888119c00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055c2530dbf40 CR3: 0000000103056004 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 xfrm_dev_state_add+0x2a9/0x770
 ? memcpy+0x38/0x60
 xfrm_add_sa+0x2278/0x3b10 [xfrm_user]
 ? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user]
 ? register_lock_class+0x1750/0x1750
 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user]
 ? rcu_read_lock_sched_held+0x91/0xc0
 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user]
 ? find_held_lock+0x3a/0x1c0
 ? mutex_lock_io_nested+0x1210/0x1210
 ? sched_clock_cpu+0x18/0x170
 netlink_rcv_skb+0x121/0x350
 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user]
 ? netlink_ack+0x9d0/0x9d0
 ? netlink_deliver_tap+0x17c/0xa50
 xfrm_netlink_rcv+0x68/0x80 [xfrm_user]
 netlink_unicast+0x41c/0x610
 ? netlink_attachskb+0x710/0x710
 netlink_sendmsg+0x6b9/0xb70
[ ...]

Fixes: 18cb261a ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To dereference bond->curr_active_slave, it uses rcu_dereference().
But it and the caller doesn't acquire RCU so a warning occurs.
So add rcu_read_lock().

Test commands:
    ip link add dummy0 type dummy
    ip link add bond0 type bond
    ip link set dummy0 master bond0
    ip link set dummy0 up
    ip link set bond0 up
    ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 \
	    mode transport \
	    reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \
	    0x44434241343332312423222114131211f4f3f2f1 128 sel \
	    src 14.0.0.52/24 dst 14.0.0.70/24 proto tcp offload \
	    dev bond0 dir in

Splat looks like:
=============================
WARNING: suspicious RCU usage
5.13.0-rc3+ #1168 Not tainted
-----------------------------
drivers/net/bonding/bond_main.c:411 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/684:
 #0: ffffffff9a2757c0 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{3:3},
at: xfrm_netlink_rcv+0x59/0x80 [xfrm_user]
   55.191733][  T684] stack backtrace:
CPU: 0 PID: 684 Comm: ip Not tainted 5.13.0-rc3+ #1168
Call Trace:
 dump_stack+0xa4/0xe5
 bond_ipsec_add_sa+0x18c/0x1f0 [bonding]
 xfrm_dev_state_add+0x2a9/0x770
 ? memcpy+0x38/0x60
 xfrm_add_sa+0x2278/0x3b10 [xfrm_user]
 ? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user]
 ? register_lock_class+0x1750/0x1750
 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user]
 ? rcu_read_lock_sched_held+0x91/0xc0
 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user]
 ? find_held_lock+0x3a/0x1c0
 ? mutex_lock_io_nested+0x1210/0x1210
 ? sched_clock_cpu+0x18/0x170
 netlink_rcv_skb+0x121/0x350
 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user]
 ? netlink_ack+0x9d0/0x9d0
 ? netlink_deliver_tap+0x17c/0xa50
 xfrm_netlink_rcv+0x68/0x80 [xfrm_user]
 netlink_unicast+0x41c/0x610
 ? netlink_attachskb+0x710/0x710
 netlink_sendmsg+0x6b9/0xb70
[ ... ]

Fixes: 18cb261a ("bonding: support hardware encryption offload to slaves")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit fixes a bug (found by syzkaller) that could cause spurious
double-initializations for congestion control modules, which could cause
memory leaks or other problems for congestion control modules (like CDG)
that allocate memory in their init functions.

The buggy scenario constructed by syzkaller was something like:

(1) create a TCP socket
(2) initiate a TFO connect via sendto()
(3) while socket is in TCP_SYN_SENT, call setsockopt(TCP_CONGESTION),
    which calls:
       tcp_set_congestion_control() ->
         tcp_reinit_congestion_control() ->
           tcp_init_congestion_control()
(4) receive ACK, connection is established, call tcp_init_transfer(),
    set icsk_ca_initialized=0 (without first calling cc->release()),
    call tcp_init_congestion_control() again.

Note that in this sequence tcp_init_congestion_control() is called
twice without a cc->release() call in between. Thus, for CC modules
that allocate memory in their init() function, e.g, CDG, a memory leak
may occur. The syzkaller tool managed to find a reproducer that
triggered such a leak in CDG.

The bug was introduced when that commit 8919a9b3 ("tcp: Only init
congestion control if not initialized already")
introduced icsk_ca_initialized and set icsk_ca_initialized to 0 in
tcp_init_transfer(), missing the possibility for a sequence like the
one above, where a process could call setsockopt(TCP_CONGESTION) in
state TCP_SYN_SENT (i.e. after the connect() or TFO open sendmsg()),
which would call tcp_init_congestion_control(). It did not intend to
reset any initialization that the user had already explicitly made;
it just missed the possibility of that particular sequence (which
syzkaller managed to find).

Fixes: 8919a9b3 ("tcp: Only init congestion control if not initialized already")
Reported-by: syzbot+f1e24a0594d4e3a895d3@syzkaller.appspotmail.com
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When multiple SKBs are merged to a new skb under napi GRO,
or SKB is re-used by napi, if nfct was set for them in the
driver, it will not be released while freeing their stolen
head state or on re-use.

Release nfct on napi's stolen or re-used SKBs, and
in gro_list_prepare, check conntrack metadata diff.

Fixes: 5c6b9460 ("net/mlx5e: CT: Handle misses after executing CT action")
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xiaoliang Yang says:

====================
net: stmmac: re-configure tas basetime after ptp time adjust

If the DWMAC Ethernet device has already set the Qbv EST configuration
before using ptp to synchronize the time adjustment, the Qbv base time
may change to be the past time of the new current time. This is not
allowed by hardware.

This patch calculates and re-configures the Qbv basetime after ptp time
adjustment.

v1->v2:
  Update est mutex lock to protect btr/ctr r/w to be atomic.
  Add btr_reserve to store basetime from qopt and used as origin base
time in Qbv re-configuration.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

After adjusting the ptp time, the Qbv base time may be the past time
of the new current time. dwmac5 hardware limited the base time cannot
be set as past time. This patch add a btr_reserve to store the base
time get from qopt, then calculate the base time and reset the Qbv
configuration after ptp time adjust.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a mutex lock to protect est structure parameters so that the
EST parameters can be updated by other threads.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Separate the TAS basetime calculation function so that it can be
called by other functions.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix format string mismatch in ptp_sysfs.c. Use %u for unsigned int.

Fixes: 73f37068 ("ptp: support ptp physical/virtual clocks conversion")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix NULL pointer dereference in ptp_clock_register. The argument
"parent" of ptp_clock_register may be NULL pointer.

Fixes: 73f37068 ("ptp: support ptp physical/virtual clocks conversion")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Always set skb_shared_info data structure in mvneta_swbm_add_rx_fragment
routine even if the fragment contains only the ethernet FCS.

Fixes: 039fbc47 ("net: mvneta: alloc skb_shared_info on the mvneta_rx_swbm stack")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If an UDP packet enters the GRO engine but is not eligible
for aggregation and is not targeting an UDP tunnel,
udp_gro_receive() will not set the flush bit, and packet
could delayed till the next napi flush.

Fix the issue ensuring non GROed packets traverse
skb_gro_flush_final().
Reported-and-tested-by: Matthias Treydte <mt@waldheinz.de>
Fixes: 18f25dc3 ("udp: skip L4 aggregation for UDP tunnel packets")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit dacce2be ("vmxnet3: add geneve and vxlan tunnel offload
support") added support for encapsulation offload. However, the inner
offload capability is to be restricted to UDP tunnels with default
Vxlan and Geneve ports.

This patch fixes the issue for tunnels with non-default ports using
features check capability and filtering appropriate features for such
tunnels.

Fixes: dacce2be ("vmxnet3: add geneve and vxlan tunnel offload support")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Horman says:

====================
small tc conntrack fixes

Louis Peens says:

The first patch makes sure that any callbacks registered to
the ct->nf_tables table are cleaned up before freeing.

The second patch removes what was effectively a workaround
in the nfp driver because of the missing cleanup in patch 1.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The current location of the callback delete can lead to a race
condition where deleting the callback requires a write_lock on
the nf_table, but at the same time another thread from netfilter
could have taken a read lock on the table before trying to offload.
Since the driver is taking a rtnl_lock this can lead into a deadlock
situation, where the netfilter offload will wait for the cls_flower
rtnl_lock to be released, but this cannot happen since this is
waiting for the nf_table read_lock to be released before it can
delete the callback.

Solve this by completely removing the nf_flow_table_offload_del_cb
call, as this will now be cleaned up by act_ct itself when cleaning
up the specific nf_table.

Fixes: 62268e78 ("nfp: flower-ct: add nft callback stubs")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When cleaning up the nf_table in tcf_ct_flow_table_cleanup_work
there is no guarantee that the callback list, added to by
nf_flow_table_offload_add_cb, is empty. This means that it is
possible that the flow_block_cb memory allocated will be lost.

Fix this by iterating the list and freeing the flow_block_cb entries
before freeing the nf_table entry (via freeing ct_ft).

Fixes: 978703f4 ("netfilter: flowtable: Add API for registering to flow table events")
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 2796d0c6 ("bridge: Automatically manage
port promiscuous mode.")
bridges with `vlan_filtering 1` and only 1 auto-port don't
set IFF_PROMISC for unicast-filtering-capable ports.

Normally on port changes `br_manage_promisc` is called to
update the promisc flags and unicast filters if necessary,
but it cannot distinguish between *new* ports and ones
losing their promisc flag, and new ports end up not
receiving the MAC address list.

Fix this by calling `br_fdb_sync_static` in `br_add_if`
after the port promisc flags are updated and the unicast
filter was supposed to have been filled.

Fixes: 2796d0c6 ("bridge: Automatically manage port promiscuous mode.")
Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some tests are failing, John bisected the issue to a recent commit.

sock_set_timestamp() parameters should be :

1) sk
2) optname
3) valbool

Fixes: 371087aa ("sock: expose so_timestamp options for mptcp")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Bisected-by: John Sperbeck <jsperbeck@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

While tp->mtu_info is read while socket is owned, the write
sides happen from err handlers (tcp_v[46]_mtu_reduced)
which only own the socket spinlock.

Fixes: 563d34d0 ("tcp: dont drop MTU reduction indications")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The confirm operation should be checked. If there are any failed,
the packet should be dropped like in ovs and netfilter.

Fixes: b57dc7c1 ("net/sched: Introduce action ct")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

The prefetch is incorrectly using the dma address instead of the virtual
address.

It's supposed to be:
prefetch((char *)buf_state->page_info.page_address +
	 buf_state->page_info.page_offset)

However, after correcting this mistake, there is no evidence of
performance improvement.

Fixes: 9b8dd5e5 ("gve: DQO: Add RX path")
Signed-off-by: Bailey Forrest <bcf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 628a5c56 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE") introduced
ip6_skb_dst_mtu with return value of signed int which is inconsistent
with actually returned values. Also 2 users of this function actually
assign its value to unsigned int variable and only __xfrm6_output
assigns result of this function to signed variable but actually uses
as unsigned in further comparisons and calls. Change this function
to return unsigned int value.

Fixes: 628a5c56 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

The wrappers in include/linux/pci-dma-compat.h should go away.

Replace 'pci_set_dma_mask/pci_set_consistent_dma_mask' by an equivalent
and less verbose 'dma_set_mask_and_coherent()' call.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I have checked that the IEEE standard 802.1Q-2018 section 8.6.9.4.5
is called AdminGateStates.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring array fields.

Add a wrapping struct to serve as the memcpy() source so the compiler
can perform appropriate bounds checking, avoiding this future warning:

In function '__fortify_memcpy',
    inlined from 'iucv_message_pending' at net/iucv/iucv.c:1663:4:
./include/linux/fortify-string.h:246:4: error: call to '__read_overflow2_field' declared with attribute error: detected read beyond size of field (2nd parameter)
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If 'gve_probe()' fails, we should propagate the error code, instead of
hard coding a -ENXIO value.
Make sure that all error handling paths set a correct value for 'err'.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the 'register_netdev() call fails, we must release the resources
allocated by the previous 'gve_init_priv()' call, as already done in the
remove function.

Add a new label and the missing 'gve_teardown_priv_resources()' in the
error handling path.

Fixes: 893ce44d ("gve: Add basic driver framework for Compute Engine Virtual NIC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nguy/net-queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-07-01

This series contains updates to igb, igc, ixgbe, e1000e, fm10k, and iavf
drivers.

Vinicius fixes a use-after-free issue present in igc and igb.

Tom Rix fixes the return value for igc_read_phy_reg() when the
operation is not supported for igc.

Christophe Jaillet fixes unrolling of PCIe error reporting for ixgbe,
igc, igb, fm10k, e10000e, and iavf.

Alex ensures that q_vector array is not accessed beyond its bounds for
igb.

Jedrzej moves ring assignment to occur after bounds have been checked in
igb.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add stmmac_fpe_stop_wq() in stmmac_suspend() to terminate FPE workqueue
during suspend. So, in suspend mode, there will be no FPE workqueue
available. Without this fix, new additional FPE workqueue will be created
in every suspend->resume cycle.

Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>