Pull sound fixes from Takashi Iwai:
 "A collection of fixes for 5.16-rc1, notably for a few regressions that
  were found in 5.15 and pre-rc1:

   - revert of the unification of SG-buffer helper functions on x86 and
     the relevant fix

   - regression fixes for mmap after the recent code refactoring

   - two NULL dereference fixes in HD-audio controller driver

   - UAF fixes in ALSA timer core

   - a few usual HD-audio and FireWire quirks"

* tag 'sound-fix-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: fireworks: add support for Loud Onyx 1200f quirk
  ALSA: hda: fix general protection fault in azx_runtime_idle
  ALSA: hda: Free card instance properly at probe errors
  ALSA: hda/realtek: Add quirk for HP EliteBook 840 G7 mute LED
  ALSA: memalloc: Remove a stale comment
  ALSA: synth: missing check for possible NULL after the call to kstrdup
  ALSA: memalloc: Use proper SG helpers for noncontig allocations
  ALSA: pci: rme: Fix unaligned buffer addresses
  ALSA: firewire-motu: add support for MOTU Track 16
  ALSA: PCM: Fix NULL dereference at mmap checks
  ALSA: hda/realtek: Add quirk for ASUS UX550VE
  ALSA: timer: Unconditionally unlink slave instances, too
  ALSA: memalloc: Catch call with NULL snd_dma_buffer pointer
  Revert "ALSA: memalloc: Convert x86 SG-buffer handling with non-contiguous type"
  ALSA: hda/realtek: Add a quirk for Acer Spin SP513-54N
  ALSA: firewire-motu: add support for MOTU Traveler mk3
  ALSA: hda/realtek: Headset fixup for Clevo NH77HJQ
  ALSA: timer: Fix use-after-free problem

Pull more drm updates from Dave Airlie:
 "I missed a drm-misc-next pull for the main pull last week. It wasn't
  that major and isn't the bulk of this at all. This has a bunch of
  fixes all over, a lot for amdgpu and i915.

  bridge:
   - HPD improvments for lt9611uxc
   - eDP aux-bus support for ps8640
   - LVDS data-mapping selection support

  ttm:
   - remove huge page functionality (needs reworking)
   - fix a race condition during BO eviction

  panels:
   - add some new panels

  fbdev:
   - fix double-free
   - remove unused scrolling acceleration
   - CONFIG_FB dep improvements

  locking:
   - improve contended locking logging
   - naming collision fix

  dma-buf:
   - add dma_resv_for_each_fence iterator
   - fix fence refcounting bug
   - name locking fixesA

  prime:
   - fix object references during mmap

  nouveau:
   - various code style changes
   - refcount fix
   - device removal fixes
   - protect client list with a mutex
   - fix CE0 address calculation

  i915:
   - DP rates related fixes
   - Revert disabling dual eDP that was causing state readout problems
   - put the cdclk vtables in const data
   - Fix DVO port type for older platforms
   - Fix blankscreen by turning DP++ TMDS output buffers on encoder->shutdown
   - CCS FBs related fixes
   - Fix recursive lock in GuC submission
   - Revert guc_id from i915_request tracepoint
   - Build fix around dmabuf

  amdgpu:
   - GPU reset fix
   - Aldebaran fix
   - Yellow Carp fixes
   - DCN2.1 DMCUB fix
   - IOMMU regression fix for Picasso
   - DSC display fixes
   - BPC display calculation fixes
   - Other misc display fixes
   - Don't allow partial copy from user for DC debugfs
   - SRIOV fixes
   - GFX9 CSB pin count fix
   - Various IP version check fixes
   - DP 2.0 fixes
   - Limit DCN1 MPO fix to DCN1

  amdkfd:
   - SVM fixes
   - Fix gfx version for renoir
   - Reset fixes

  udl:
   - timeout fix

  imx:
   - circular locking fix

  virtio:
   - NULL ptr deref fix"

* tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drm: (126 commits)
  drm/ttm: Double check mem_type of BO while eviction
  drm/amdgpu: add missed support for UVD IP_VERSION(3, 0, 64)
  drm/amdgpu: drop jpeg IP initialization in SRIOV case
  drm/amd/display: reject both non-zero src_x and src_y only for DCN1x
  drm/amd/display: Add callbacks for DMUB HPD IRQ notifications
  drm/amd/display: Don't lock connection_mutex for DMUB HPD
  drm/amd/display: Add comment where CONFIG_DRM_AMD_DC_DCN macro ends
  drm/amdkfd: Fix retry fault drain race conditions
  drm/amdkfd: lower the VAs base offset to 8KB
  drm/amd/display: fix exit from amdgpu_dm_atomic_check() abruptly
  drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov
  drm/amdgpu: fix uvd crash on Polaris12 during driver unloading
  drm/i915/adlp/fb: Prevent the mapping of redundant trailing padding NULL pages
  drm/i915/fb: Fix rounding error in subsampled plane size calculation
  drm/i915/hdmi: Turn DP++ TMDS output buffers back on in encoder->shutdown()
  drm/locking: fix __stack_depot_* name conflict
  drm/virtio: Fix NULL dereference error in virtio_gpu_poll
  drm/amdgpu: fix SI handling in amdgpu_device_asic_has_dc_support()
  drm/amdgpu: Fix dangling kfd_bo pointer for shared BOs
  drm/amd/amdkfd: Don't sent command to HWS on kfd reset
  ...

Pull input updates from Dmitry Torokhov:
 "Just one new driver (Cypress StreetFighter touchkey), and no input
  core changes this time.

  Plus various fixes and enhancements to existing drivers"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
  Input: iforce - fix control-message timeout
  Input: wacom_i2c - use macros for the bit masks
  Input: ili210x - reduce sample period to 15ms
  Input: ili210x - improve polled sample spacing
  Input: ili210x - special case ili251x sample read out
  Input: elantench - fix misreporting trackpoint coordinates
  Input: synaptics-rmi4 - Fix device hierarchy
  Input: i8042 - Add quirk for Fujitsu Lifebook T725
  Input: cap11xx - add support for cap1206
  Input: remove unused header <linux/input/cy8ctmg110_pdata.h>
  Input: ili210x - add ili251x firmware update support
  Input: ili210x - export ili251x version details via sysfs
  Input: ili210x - use resolution from ili251x firmware
  Input: pm8941-pwrkey - respect reboot_mode for warm reset
  reboot: export symbol 'reboot_mode'
  Input: max77693-haptic - drop unneeded MODULE_ALIAS
  Input: cpcap-pwrbutton - do not set input parent explicitly
  Input: max8925_onkey - don't mark comment as kernel-doc
  Input: ads7846 - do not attempt IRQ workaround when deferring probe
  Input: ads7846 - use input_set_capability()
  ...

Pull RTC updates from Alexandre Belloni:
 "This includes new ioctls to get and set parameters and in particular
  the backup switch mode that is needed for some RTCs to actually enable
  the backup voltage (and have a useful RTC).

  The same interface can also be used to get the actual features
  supported by the RTC so userspace has a better way than trying and
  failing.

  Summary:

  Subsystem:
   - Add new ioctl to get and set extra RTC parameters, this includes
     backup switch mode
   - Expose available features to userspace, in particular, when alarmas
     have a resolution of one minute instead of a second.
   - Let the core handle those alarms with a minute resolution

  New driver:
   - MSTAR MSC313 RTC

  Drivers:
   - Add SPI ID table where necessary
   - Add BSM support for rv3028, rv3032 and pcf8523
   - s3c: set RTC range
   - rx8025: set range, implement .set_offset and .read_offset"

* tag 'rtc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
  rtc: rx8025: use .set_offset/.read_offset
  rtc: rx8025: use rtc_add_group
  rtc: rx8025: clear RTC_FEATURE_ALARM when alarm are not supported
  rtc: rx8025: set range
  rtc: rx8025: let the core handle the alarm resolution
  rtc: rx8025: switch to devm_rtc_allocate_device
  rtc: ab8500: let the core handle the alarm resolution
  rtc: ab-eoz9: support UIE when available
  rtc: ab-eoz9: use RTC_FEATURE_UPDATE_INTERRUPT
  rtc: rv3032: let the core handle the alarm resolution
  rtc: s35390a: let the core handle the alarm resolution
  rtc: handle alarms with a minute resolution
  rtc: pcf85063: silence cppcheck warning
  rtc: rv8803: fix writing back ctrl in flag register
  rtc: s3c: Add time range
  rtc: s3c: Extract read/write IO into separate functions
  rtc: s3c: Remove usage of devm_rtc_device_register()
  rtc: tps80031: Remove driver
  rtc: sun6i: Allow probing without an early clock provider
  rtc: pcf8523: add BSM support
  ...

Pull more libata updates from Damien Le Moal:
 "Second round of updates for libata for 5.16:

   - Fix READ LOG EXT and READ LOG DMA EXT command timeouts during disk
     revalidation after a resume or a modprobe of the LLDD (me)

   - Remove unnecessary error message in sata_highbank driver (Xu)

   - Better handling of accesses to the IDENTIFY DEVICE data log for
     drives that do not support this log page (me)

   - Fix ahci_shost_attr_group declaration in ahci driver (me)"

* tag 'libata-5.16-rc1-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  libata: libahci: declare ahci_shost_attr_group as static
  libata: add horkage for missing Identify Device log
  ata: sata_highbank: Remove unnecessary print function dev_err()
  libata: fix read log timeout value

TL;DR: While a tool like liblockdep is useful, it probably doesn't
belong within the kernel tree.

liblockdep attempts to reuse kernel code both directly (by directly
building the kernel's lockdep code) as well as indirectly (by using
sanitized headers). This makes liblockdep an integral part of the
kernel.

It also makes liblockdep quite unique: while other userspace code might
use sanitized headers, it generally doesn't attempt to use kernel code
directly which means that changes on the kernel side of things don't
affect (and break) it directly.

All our workflows and tooling around liblockdep don't support this
uniqueness. Changes that go into the kernel code aren't validated to not
break in-tree userspace code.

liblockdep ended up being very fragile, breaking over and over, to the
point that living in the same tree as the lockdep code lost most of it's
value.

liblockdep should continue living in an external tree, syncing with
the kernel often, in a controllable way.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit aeb58c86 ("thermal/drivers/int340x: processor_thermal: Suppot
64 bit RFIM responses") started using 'readq()' to read 64-bit status
responses from the int340x hardware.

That's all fine and good, but on 32-bit targets a 64-bit 'readq()' is
ambiguous, since it's no longer an atomic access.  Some hardware might
require 64-bit accesses, and other hardware might want low word first or
high word first.

It's quite likely that the driver isn't relevant in a 32-bit environment
any more, and there's a patch floating around to just make it depend on
X86_64, but let's make it buildable on x86-32 anyway.

The driver previously just read the low 32 bits, so the hardware
certainly is ok with 32-bit reads, and in a little-endian environment
the low word first model is the natural one.

So just add the include for the 'io-64-nonatomic-lo-hi.h' version.

Fixes: aeb58c86 ("thermal/drivers/int340x: processor_thermal: Suppot 64 bit RFIM responses")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Prepare input updates for 5.16 merge window.

 * dma-buf: name_lock fixes
 * prime: Keep object ref during mmap
 * nouveau: Fix a refcount issue; Fix device removal; Protect client
   list with dedicated mutex; Fix address CE0 address calculation
 * ttm: Fix race condition during BO eviction
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YYzY6jeox9EeI15i@linux-uq9g.fritz.box

I got a drm-fixes which had some 5.15 stuff in it, so to avoid
the mess just backmerge here.

Linux 5.15
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull PCI fixes from Bjorn Helgaas:
 "Revert conversion to struct device.driver instead of struct
  pci_dev.driver.

  The device.driver is set earlier, and using it caused the PCI core to
  call driver PM entry points before .probe() and after .remove(), when
  the driver isn't prepared.

  This caused NULL pointer dereferences in i2c_designware_pci and
  probably other driver issues"

* tag 'pci-v5.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "PCI: Use to_pci_driver() instead of pci_dev->driver"
  Revert "PCI: Remove struct pci_dev->driver"

ahci_shost_attr_group is referenced only in drivers/ata/libahci.c.
Declare it as static.

Fixes: c3f69c7f ("scsi: ata: Switch to attribute groups")
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

ACS-3 introduced the ATA Identify Device Data log as mandatory. A
warning message currently signals to the user if a device does not
report supporting this log page in the log directory page, regardless
of the ATA version of the device. Furthermore, this warning will appear
for all attempts at accessing this missing log page during device
revalidation.

Since it is useless to constantly access the log directory and warn
about this lack of support once we have discovered that the device
does not support this log page, introduce the horkage flag
ATA_HORKAGE_NO_ID_DEV_LOG to mark a device as lacking support for
the Identify Device Data log page. Set this flag when
ata_log_supported() returns false in ata_identify_page_supported().
The warning is printed only if the device ATA level is 10 or above
(ACS-3 or above), and only once on device scan. With this flag set, the
log directory page is not accessed again to test for Identify Device
Data log page support.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull KCSAN updates from Paul McKenney:
 "This contains initialization fixups, testing improvements, addition of
  instruction pointer to data-race reports, and scoped data-race checks"

* tag 'kcsan.2021.11.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  kcsan: selftest: Cleanup and add missing __init
  kcsan: Move ctx to start of argument list
  kcsan: Support reporting scoped read-write access type
  kcsan: Start stack trace with explicit location if provided
  kcsan: Save instruction pointer for scoped accesses
  kcsan: Add ability to pass instruction pointer of access to reporting
  kcsan: test: Fix flaky test case
  kcsan: test: Use kunit_skip() to skip tests
  kcsan: test: Defer kcsan_test_init() after kunit initialization

Merge tag 'apparmor-pr-2021-11-10' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor updates from John Johansen:
 "Features
   - use per file locks for transactional queries
   - update policy management capability checks to work with LSM stacking

  Bug Fixes:
   - check/put label on apparmor_sk_clone_security()
   - fix error check on update of label hname
   - fix introspection of of task mode for unconfined tasks

  Cleanups:
   - avoid -Wempty-body warning
   - remove duplicated 'Returns:' comments
   - fix doc warning
   - remove unneeded one-line hook wrappers
   - use struct_size() helper in kzalloc()
   - fix zero-length compiler warning in AA_BUG()
   - file.h: delete duplicated word
   - delete repeated words in comments
   - remove repeated declaration"

* tag 'apparmor-pr-2021-11-10' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: remove duplicated 'Returns:' comments
  apparmor: remove unneeded one-line hook wrappers
  apparmor: Use struct_size() helper in kzalloc()
  apparmor: fix zero-length compiler warning in AA_BUG()
  apparmor: use per file locks for transactional queries
  apparmor: fix doc warning
  apparmor: Remove the repeated declaration
  apparmor: avoid -Wempty-body warning
  apparmor: Fix internal policy capable check for policy management
  apparmor: fix error check
  security: apparmor: delete repeated words in comments
  security: apparmor: file.h: delete duplicated word
  apparmor: switch to apparmor to internal capable check for policy management
  apparmor: update policy capable checks to use a label
  apparmor: fix introspection of of task mode for unconfined tasks
  apparmor: check/put label on apparmor_sk_clone_security()

Merge more updates from Andrew Morton:
 "The post-linux-next material.

  7 patches.

  Subsystems affected by this patch series (all mm): debug,
  slab-generic, migration, memcg, and kasan"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kasan: add kasan mode messages when kasan init
  mm: unexport {,un}lock_page_memcg
  mm: unexport folio_memcg_{,un}lock
  mm/migrate.c: remove MIGRATE_PFN_LOCKED
  mm: migrate: simplify the file-backed pages validation when migrating its mapping
  mm: allow only SLUB on PREEMPT_RT
  mm/page_owner.c: modify the type of argument "order" in some functions

Pull m68knommu updates from Greg Ungerer:
 "Only two changes.

  One removes the now unused CONFIG_MCPU32 symbol. The other sets a
  default for the CONFIG_MEMORY_RESERVE config symbol (this aids
  scripting and other automation) so you don't interactively get asked
  for a value at configure time.

  Summary:

   - remove unused CONFIG_MCPU32 symbol

   - default CONFIG_MEMORY_RESERVE value (for scripting)"

* tag 'm68knommu-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: Remove MCPU32 config symbol
  m68k: set a default value for MEMORY_RESERVE

This reverts commit 2a4d9408.

Robert reported a NULL pointer dereference caused by the PCI core
(local_pci_probe()) calling the i2c_designware_pci driver's
.runtime_resume() method before the .probe() method.  i2c_dw_pci_resume()
depends on initialization done by i2c_dw_pci_probe().

Prior to 2a4d9408 ("PCI: Use to_pci_driver() instead of
pci_dev->driver"), pci_pm_runtime_resume() avoided calling the
.runtime_resume() method because pci_dev->driver had not been set yet.

2a4d9408 and b5f9c644 ("PCI: Remove struct pci_dev->driver"),
removed pci_dev->driver, replacing it by device->driver, which *has* been
set by this time, so pci_pm_runtime_resume() called the .runtime_resume()
method when it previously had not.

Fixes: 2a4d9408 ("PCI: Use to_pci_driver() instead of pci_dev->driver")
Link: https://lore.kernel.org/linux-i2c/CAP145pgdrdiMAT7=-iB1DMgA7t_bMqTcJL4N0=6u8kNY3EU0dw@mail.gmail.com/Reported-by: Robert Święcki <robert@swiecki.net>
Tested-by: Robert Święcki <robert@swiecki.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

This reverts commit b5f9c644.

Revert b5f9c644 ("PCI: Remove struct pci_dev->driver"), which is needed
to revert 2a4d9408 ("PCI: Use to_pci_driver() instead of
pci_dev->driver").

2a4d9408 caused a NULL pointer dereference reported by Robert Święcki.
Details in the revert of that commit.

Fixes: 2a4d9408 ("PCI: Use to_pci_driver() instead of pci_dev->driver")
Link: https://lore.kernel.org/linux-i2c/CAP145pgdrdiMAT7=-iB1DMgA7t_bMqTcJL4N0=6u8kNY3EU0dw@mail.gmail.com/Reported-by: Robert Święcki <robert@swiecki.net>
Tested-by: Robert Święcki <robert@swiecki.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Pull tracing fixes from Steven Rostedt:
 "Two locking fixes:

   - Add mutex protection to ring_buffer_reset()

   - Fix deadlock in modify_ftrace_direct_multi()"

* tag 'trace-v5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace/direct: Fix lockup in modify_ftrace_direct_multi
  ring-buffer: Protect ring_buffer_reset() from reentrancy

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, can and netfilter.

  Current release - regressions:

   - bpf: do not reject when the stack read size is different from the
     tracked scalar size

   - net: fix premature exit from NAPI state polling in napi_disable()

   - riscv, bpf: fix RV32 broken build, and silence RV64 warning

  Current release - new code bugs:

   - net: fix possible NULL deref in sock_reserve_memory

   - amt: fix error return code in amt_init(); fix stopping the
     workqueue

   - ax88796c: use the correct ioctl callback

  Previous releases - always broken:

   - bpf: stop caching subprog index in the bpf_pseudo_func insn

   - security: fixups for the security hooks in sctp

   - nfc: add necessary privilege flags in netlink layer, limit
     operations to admin only

   - vsock: prevent unnecessary refcnt inc for non-blocking connect

   - net/smc: fix sk_refcnt underflow on link down and fallback

   - nfnetlink_queue: fix OOB when mac header was cleared

   - can: j1939: ignore invalid messages per standard

   - bpf, sockmap:
      - fix race in ingress receive verdict with redirect to self
      - fix incorrect sk_skb data_end access when src_reg = dst_reg
      - strparser, and tls are reusing qdisc_skb_cb and colliding

   - ethtool: fix ethtool msg len calculation for pause stats

   - vlan: fix a UAF in vlan_dev_real_dev() when ref-holder tries to
     access an unregistering real_dev

   - udp6: make encap_rcv() bump the v6 not v4 stats

   - drv: prestera: add explicit padding to fix m68k build

   - drv: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge

   - drv: mvpp2: fix wrong SerDes reconfiguration order

  Misc & small latecomers:

   - ipvs: auto-load ipvs on genl access

   - mctp: sanity check the struct sockaddr_mctp padding fields

   - libfs: support RENAME_EXCHANGE in simple_rename()

   - avoid double accounting for pure zerocopy skbs"

* tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (123 commits)
  selftests/net: udpgso_bench_rx: fix port argument
  net: wwan: iosm: fix compilation warning
  cxgb4: fix eeprom len when diagnostics not implemented
  net: fix premature exit from NAPI state polling in napi_disable()
  net/smc: fix sk_refcnt underflow on linkdown and fallback
  net/mlx5: Lag, fix a potential Oops with mlx5_lag_create_definer()
  gve: fix unmatched u64_stats_update_end()
  net: ethernet: lantiq_etop: Fix compilation error
  selftests: forwarding: Fix packet matching in mirroring selftests
  vsock: prevent unnecessary refcnt inc for nonblocking connect
  net: marvell: mvpp2: Fix wrong SerDes reconfiguration order
  net: ethernet: ti: cpsw_ale: Fix access to un-initialized memory
  net: stmmac: allow a tc-taprio base-time of zero
  selftests: net: test_vxlan_under_vrf: fix HV connectivity test
  net: hns3: allow configure ETS bandwidth of all TCs
  net: hns3: remove check VF uc mac exist when set by PF
  net: hns3: fix some mac statistics is always 0 in device version V2
  net: hns3: fix kernel crash when unload VF while it is being reset
  net: hns3: sync rx ring head in echo common pull
  net: hns3: fix pfc packet number incorrect after querying pfc parameters
  ...

Pull char/misc fix from Greg KH:
 "Here is a single fix for 5.16-rc1 to resolve a build problem that came
  in through the coresight tree (and as such came in through the
  char/misc tree merge in the 5.16-rc1 merge window).

  It resolves a build problem with 'allmodconfig' on arm64 and is acked
  by the proper subsystem maintainers. It has been in linux-next all
  week with no reported problems"

* tag 'char-misc-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  arm64: cpufeature: Export this_cpu_has_cap helper

Pull USB fixes from Greg KH:
 "Here are some small reverts and fixes for USB drivers for issues that
  came up during the 5.16-rc1 merge window.

  These include:

   - two reverts of xhci and USB core patches that are causing problems
     in many systems.

   - xhci 3.1 enumeration delay fix for systems that were having
     problems.

  All three of these have been in linux-next all week with no reported
  issues"

* tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delay
  Revert "usb: core: hcd: Add support for deferring roothub registration"
  Revert "xhci: Set HCD flag to defer primary roothub registration"

There are multiple kasan modes.  It makes sense that we add some
messages to know which kasan mode is active when booting up [1].

Link: https://bugzilla.kernel.org/show_bug.cgi?id=212195 [1]
Link: https://lkml.kernel.org/r/20211020094850.4113-1-Kuan-Ying.Lee@mediatek.comSigned-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Yee Lee <yee.lee@mediatek.com>
Cc: Nicholas Tang <nicholas.tang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

These are only used in built-in core mm code.

Link: https://lkml.kernel.org/r/20210820095815.445392-3-hch@lst.deSigned-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "unexport memcg locking helpers".

Neither the old page-based nor the new folio-based memcg locking helpers
are used in modular code at all, so drop the exports.

This patch (of 2):

folio_memcg_{,un}lock are only used in built-in core mm code.

Link: https://lkml.kernel.org/r/20210820095815.445392-1-hch@lst.de
Link: https://lkml.kernel.org/r/20210820095815.445392-2-hch@lst.deSigned-off-by: Christoph Hellwig <hch@lst.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MIGRATE_PFN_LOCKED is used to indicate to migrate_vma_prepare() that a
source page was already locked during migrate_vma_collect().  If it
wasn't then the a second attempt is made to lock the page.  However if
the first attempt failed it's unlikely a second attempt will succeed,
and the retry adds complexity.  So clean this up by removing the retry
and MIGRATE_PFN_LOCKED flag.

Destination pages are also meant to have the MIGRATE_PFN_LOCKED flag
set, but nothing actually checks that.

Link: https://lkml.kernel.org/r/20211025041608.289017-1-apopple@nvidia.comSigned-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There is no need to validate the file-backed page's refcount before
trying to freeze the page's expected refcount, instead we can rely on
the folio_ref_freeze() to validate if the page has the expected refcount
before migrating its mapping.

Moreover we are always under the page lock when migrating the page
mapping, which means nowhere else can remove it from the page cache, so
we can remove the xas_load() validation under the i_pages lock.

Link: https://lkml.kernel.org/r/cover.1629447552.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/df4c129fd8e86a95dbc55f4663d77441cc0d3bd1.1629447552.git.baolin.wang@linux.alibaba.comSigned-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Memory allocators may disable interrupts or preemption as part of the
allocation and freeing process.  For PREEMPT_RT it is important that
these sections remain deterministic and short and therefore don't depend
on the size of the memory to allocate/ free or the inner state of the
algorithm.

Until v3.12-RT the SLAB allocator was an option but involved several
changes to meet all the requirements.  The SLUB design fits better with
PREEMPT_RT model and so the SLAB patches were dropped in the 3.12-RT
patchset.  Comparing the two allocator, SLUB outperformed SLAB in both
throughput (time needed to allocate and free memory) and the maximal
latency of the system measured with cyclictest during hackbench.

SLOB was never evaluated since it was unlikely that it preforms better
than SLAB.  During a quick test, the kernel crashed with SLOB enabled
during boot.

Disable SLAB and SLOB on PREEMPT_RT.

[bigeasy@linutronix.de: commit description]

Link: https://lkml.kernel.org/r/20211015210336.gen3tib33ig5q2md@linutronix.deSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The type of "order" in struct page_owner is unsigned short.
However, it is unsigned int in the following 3 functions:

  __reset_page_owner
  __set_page_owner_handle
  __set_page_owner_handle

The type of "order" in argument list is unsigned int, which is
inconsistent.

[akpm@linux-foundation.org: update include/linux/page_owner.h]

Link: https://lkml.kernel.org/r/20211020125945.47792-1-caoyixuan2019@email.szu.edu.cnSigned-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Loud Technologies shipped Onyx 1200f 2008 in its Mackie brand and
already discontinued. The model uses component of Fireworks board
module as its communication and DSP function.

The latest firmware (v4.6.0) has a quirk that tx packet includes wrong
value (0x1f) in its dbs field at middle and higher sampling transfer
frequency. It brings ALSA fireworks driver discontinuity of data block
counter.

This commit fixes it by assuming it as a quirk of firmware version
4.6.0.

$ cd linux-firewire-tools/src
$ python crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  0404b9ef  bus_info_length 4, crc_length 4, crc 47599
404  31333934  bus_name "1394"
408  e064a212  irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 100,
               max_rec 10 (2048), max_rom 2, gen 1, spd 2 (S400)
40c  000ff209  company_id 000ff2     |
410  62550ce0  device_id 0962550ce0  | EUI-64 000ff20962550ce0

               root directory
               -----------------------------------------------------------------
414  0008088e  directory_length 8, crc 2190
418  03000ff2  vendor
41c  8100000f  --> descriptor leaf at 458
420  1701200f  model
424  81000018  --> descriptor leaf at 484
428  0c008380  node capabilities
42c  8d000003  --> eui-64 leaf at 438
430  d1000005  --> unit directory at 444
434  08000ff2  (immediate value)

               eui-64 leaf at 438
               -----------------------------------------------------------------
438  000281ae  leaf_length 2, crc 33198
43c  000ff209  company_id 000ff2     |
440  62550ce0  device_id 0962550ce0  | EUI-64 000ff20962550ce0

               unit directory at 444
               -----------------------------------------------------------------
444  00045d94  directory_length 4, crc 23956
448  1200a02d  specifier id: 1394 TA
44c  13010000  version
450  1701200f  model
454  8100000c  --> descriptor leaf at 484

               descriptor leaf at 458
               -----------------------------------------------------------------
458  000a199d  leaf_length 10, crc 6557
45c  00000000  textual descriptor
460  00000000  minimal ASCII
464  4d61636b  "Mack"
468  69650000  "ie"
46c  00000000
470  00000000
474  00000000
478  00000000
47c  00000000
480  00000000

               descriptor leaf at 484
               -----------------------------------------------------------------
484  000a0964  leaf_length 10, crc 2404
488  00000000  textual descriptor
48c  00000000  minimal ASCII
490  4f6e7978  "Onyx"
494  20313230  " 120"
498  30460000  "0F"
49c  00000000
4a0  00000000
4a4  00000000
4a8  00000000
4ac  00000000
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211111103015.7498-1-o-takashi@sakamocchi.jpSigned-off-by: Takashi Iwai <tiwai@suse.de>

The below commit added optional support for passing a bind address.
It configures the sockaddr bind arguments before parsing options and
reconfigures on options -b and -4.

This broke support for passing port (-p) on its own.

Configure sockaddr after parsing all arguments.

Fixes: 3327a9c4 ("selftests: add functionals test for UDP GRO")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

curr_phase is unused. Removed the dead code.

Fixes: 8d9be063 ("net: wwan: iosm: transport layer support for fw flashing/cd")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ensure diagnostics monitoring support is implemented for the SFF 8472
compliant port module and set the correct length for ethtool port
module eeprom read.

Fixes: f56ec676 ("cxgb4: Add support for ethtool i2c dump")
Signed-off-by: Manoj Malviya <manojmalviya@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

BO might sit in a wrong lru list as there is a small period of memory
moving and lru list updating.

Lets skip eviction if we hit such mismatch.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211110043149.57554-2-xinhui.pan@amd.comSigned-off-by: Christian König <christian.koenig@amd.com>

The print function dev_err() is redundant because
platform_get_irq() already prints an error.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

Some ATA drives are very slow to respond to READ_LOG_EXT and
READ_LOG_DMA_EXT commands issued from ata_dev_configure() when the
device is revalidated right after resuming a system or inserting the
ATA adapter driver (e.g. ahci). The default 5s timeout
(ATA_EH_CMD_DFL_TIMEOUT) used for these commands is too short, causing
errors during the device configuration. Ex:

...
ata9: SATA max UDMA/133 abar m524288@0x9d200000 port 0x9d200400 irq 209
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: ATA-9: XXX  XXXXXXXXXXXXXXX, XXXXXXXX, max UDMA/133
ata9.00: qc timeout (cmd 0x2f)
ata9.00: Read log page 0x00 failed, Emask 0x4
ata9.00: Read log page 0x00 failed, Emask 0x40
ata9.00: NCQ Send/Recv Log not supported
ata9.00: Read log page 0x08 failed, Emask 0x40
ata9.00: 27344764928 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata9.00: Read log page 0x00 failed, Emask 0x40
ata9.00: ATA Identify Device Log not supported
ata9.00: failed to set xfermode (err_mask=0x40)
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: configured for UDMA/133
...

The timeout error causes a soft reset of the drive link, followed in
most cases by a successful revalidation as that give enough time to the
drive to become fully ready to quickly process the read log commands.
However, in some cases, this also fails resulting in the device being
dropped.

Fix this by using adding the ata_eh_revalidate_timeouts entries for the
READ_LOG_EXT and READ_LOG_DMA_EXT commands. This defines a timeout
increased to 15s, retriable one time.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

Commit 719c5719 ("net: make napi_disable() symmetric with
enable") accidentally introduced a bug sometimes leading to a kernel
BUG when bringing an iface up/down under heavy traffic load.

Prior to this commit, napi_disable() was polling n->state until
none of (NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC) is set and then
always flip them. Now there's a possibility to get away with the
NAPIF_STATE_SCHE unset as 'continue' drops us to the cmpxchg()
call with an uninitialized variable, rather than straight to
another round of the state check.

Error path looks like:

napi_disable():
unsigned long val, new; /* new is uninitialized */

do {
	val = READ_ONCE(n->state); /* NAPIF_STATE_NPSVC and/or
				      NAPIF_STATE_SCHED is set */
	if (val & (NAPIF_STATE_SCHED | NAPIF_STATE_NPSVC)) { /* true */
		usleep_range(20, 200);
		continue; /* go straight to the condition check */
	}
	new = val | <...>
} while (cmpxchg(&n->state, val, new) != val); /* state == val, cmpxchg()
						  writes garbage */

napi_enable():
do {
	val = READ_ONCE(n->state);
	BUG_ON(!test_bit(NAPI_STATE_SCHED, &val)); /* 50/50 boom */
<...>

while the typical BUG splat is like:

[  172.652461] ------------[ cut here ]------------
[  172.652462] kernel BUG at net/core/dev.c:6937!
[  172.656914] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[  172.661966] CPU: 36 PID: 2829 Comm: xdp_redirect_cp Tainted: G          I       5.15.0 #42
[  172.670222] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021
[  172.680646] RIP: 0010:napi_enable+0x5a/0xd0
[  172.684832] Code: 07 49 81 cc 00 01 00 00 4c 89 e2 48 89 d8 80 e6 fb f0 48 0f b1 55 10 48 39 c3 74 10 48 8b 5d 10 f6 c7 04 75 3d f6 c3 01 75 b4 <0f> 0b 5b 5d 41 5c c3 65 ff 05 b8 e5 61 53 48 c7 c6 c0 f3 34 ad 48
[  172.703578] RSP: 0018:ffffa3c9497477a8 EFLAGS: 00010246
[  172.708803] RAX: ffffa3c96615a014 RBX: 0000000000000000 RCX: ffff8a4b575301a0
< snip >
[  172.782403] Call Trace:
[  172.784857]  <TASK>
[  172.786963]  ice_up_complete+0x6f/0x210 [ice]
[  172.791349]  ice_xdp+0x136/0x320 [ice]
[  172.795108]  ? ice_change_mtu+0x180/0x180 [ice]
[  172.799648]  dev_xdp_install+0x61/0xe0
[  172.803401]  dev_xdp_attach+0x1e0/0x550
[  172.807240]  dev_change_xdp_fd+0x1e6/0x220
[  172.811338]  do_setlink+0xee8/0x1010
[  172.814917]  rtnl_setlink+0xe5/0x170
[  172.818499]  ? bpf_lsm_binder_set_context_mgr+0x10/0x10
[  172.823732]  ? security_capable+0x36/0x50
< snip >

Fix this by replacing 'do { } while (cmpxchg())' with an "infinite"
for-loop with an explicit break.

From v1 [0]:
 - just use a for-loop to simplify both the fix and the existing
   code (Eric).

[0] https://lore.kernel.org/netdev/20211110191126.1214-1-alexandr.lobakin@intel.com

Fixes: 719c5719 ("net: make napi_disable() symmetric with enable")
Suggested-by: Eric Dumazet <edumazet@google.com> # for-loop
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20211110195605.1304-1-alexandr.lobakin@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull ext4 updates from Ted Ts'o:
 "Only bug fixes and cleanups for ext4 this merge window.

  Of note are fixes for the combination of the inline_data and
  fast_commit fixes, and more accurately calculating when to schedule
  additional lazy inode table init, especially when CONFIG_HZ is 100HZ"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix error code saved on super block during file system abort
  ext4: inline data inode fast commit replay fixes
  ext4: commit inline data during fast commit
  ext4: scope ret locally in ext4_try_to_trim_range()
  ext4: remove an unused variable warning with CONFIG_QUOTA=n
  ext4: fix boolreturn.cocci warnings in fs/ext4/name.c
  ext4: prevent getting empty inode buffer
  ext4: move ext4_fill_raw_inode() related functions
  ext4: factor out ext4_fill_raw_inode()
  ext4: prevent partial update of the extent blocks
  ext4: check for inconsistent extents between index and leaf block
  ext4: check for out-of-order index extents in ext4_valid_extent_entries()
  ext4: convert from atomic_t to refcount_t on ext4_io_end->count
  ext4: refresh the ext4_ext_path struct after dropping i_data_sem.
  ext4: ensure enough credits in ext4_ext_shift_path_extents
  ext4: correct the left/middle/right debug message for binsearch
  ext4: fix lazy initialization next schedule time computation in more granular unit
  Revert "ext4: enforce buffer head state assertion in ext4_da_map_blocks"

Pull btrfs fix from David Sterba:
 "Fix for a deadlock when direct/buffered IO is done on a mmaped file
  and a fault happens (details in the patch). There's a fstest
  generic/647 that triggers the problem and makes testing hard"

* tag 'for-5.16-deadlock-fix-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix deadlock due to page faults during direct IO reads and writes