Pull autofs mount api updates from Christian Brauner:
 "This ports autofs to the new mount api. The patchset has existed for
  quite a while but never made it upstream. Ian picked it back up.

  This also fixes a bug where fs_param_is_fd() was passed a garbage
  param->dirfd but it expected it to be set to the fd that was used to
  set param->file otherwise result->uint_32 contains nonsense. So make
  sure it's set.

  One less filesystem using the old mount api. We're getting there,
  albeit rather slow. The last remaining major filesystem that hasn't
  converted is btrfs. Patches exist - I even wrote them - but so far
  they haven't made it upstream"

* tag 'vfs-6.7.autofs' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
  autofs: fix add autofs_parse_fd()
  fsconfig: ensure that dirfd is set to aux
  autofs: fix protocol sub version setting
  autofs: convert autofs to use the new mount api
  autofs: validate protocol version
  autofs: refactor parse_options()
  autofs: reformat 0pt enum declaration
  autofs: refactor super block info init
  autofs: add autofs_parse_fd()
  autofs: refactor autofs_prepare_pipe()

Pull vfs superblock updates from Christian Brauner:
 "This contains the work to make block device opening functions return a
  struct bdev_handle instead of just a struct block_device. The same
  struct bdev_handle is then also passed to block device closing
  functions.

  This allows us to propagate context from opening to closing a block
  device without having to modify all users everytime.

  Sidenote, in the future we might even want to try and have block
  device opening functions return a struct file directly but that's a
  series on top of this.

  These are further preparatory changes to be able to count writable
  opens and blocking writes to mounted block devices. That's a separate
  piece of work for next cycle and for that we absolutely need the
  changes to btrfs that have been quietly dropped somehow.

  Originally the series contained a patch that removed the old
  blkdev_*() helpers. But since this would've caused needles churn in
  -next for bcachefs we ended up delaying it.

  The second piece of work addresses one of the major annoyances about
  the work last cycle, namely that we required dropping s_umount
  whenever we used the superblock and fs_holder_ops for a block device.

  The reason for that requirement had been that in some codepaths
  s_umount could've been taken under disk->open_mutex (that's always
  been the case, at least theoretically). For example, on surprise block
  device removal or media change. And opening and closing block devices
  required grabbing disk->open_mutex as well.

  So we did the work and went through the block layer and fixed all
  those places so that s_umount is never taken under disk->open_mutex.
  This means no more brittle games where we yield and reacquire s_umount
  during block device opening and closing and no more requirements where
  block devices need to be closed. Filesystems don't need to care about
  this.

  There's a bunch of other follow-up work such as moving block device
  freezing and thawing to holder operations which makes it work for all
  block devices and not just the main block device just as we did for
  surprise removal. But that is for next cycle.

  Tested with fstests for all major fses, blktests, LTP"

* tag 'vfs-6.7.super' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (37 commits)
  porting: update locking requirements
  fs: assert that open_mutex isn't held over holder ops
  block: assert that we're not holding open_mutex over blk_report_disk_dead
  block: move bdev_mark_dead out of disk_check_media_change
  block: WARN_ON_ONCE() when we remove active partitions
  block: simplify bdev_del_partition()
  fs: Avoid grabbing sb->s_umount under bdev->bd_holder_lock
  jfs: fix log->bdev_handle null ptr deref in lbmStartIO
  bcache: Fixup error handling in register_cache()
  xfs: Convert to bdev_open_by_path()
  reiserfs: Convert to bdev_open_by_dev/path()
  ocfs2: Convert to use bdev_open_by_dev()
  nfs/blocklayout: Convert to use bdev_open_by_dev/path()
  jfs: Convert to bdev_open_by_dev()
  f2fs: Convert to bdev_open_by_dev/path()
  ext4: Convert to bdev_open_by_dev()
  erofs: Convert to use bdev_open_by_path()
  btrfs: Convert to bdev_open_by_path()
  fs: Convert to bdev_open_by_dev()
  mm/swap: Convert to use bdev_open_by_dev()
  ...

Pull misc x86 fixes from Ingo Molnar:

 - Fix a possible CPU hotplug deadlock bug caused by the new TSC
   synchronization code

 - Fix a legacy PIC discovery bug that results in device troubles on
   affected systems, such as non-working keybards, etc

 - Add a new Intel CPU model number to <asm/intel-family.h>

* tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Defer marking TSC unstable to a worker
  x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility
  x86/cpu: Add model number for Intel Arrow Lake mobile processor

Pull irq fix from Ingo Molnar:
 "Restore unintentionally lost quirk settings in the GIC irqchip driver,
  which broke certain devices"

* tag 'irq-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Don't override quirk settings with default values

Pull perf event fix from Ingo Molnar:
 "Fix a potential NULL dereference bug"

* tag 'perf-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix potential NULL deref

Merge tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes fixes from Masami Hiramatsu:

 - tracing/kprobes: Fix kernel-doc warnings for the variable length
   arguments

 - tracing/kprobes: Fix to count the symbols in modules even if the
   module name is not specified so that user can probe the symbols in
   the modules without module name

* tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/kprobes: Fix symbol counting logic by looking at modules as well
  tracing/kprobes: Fix the description of variable length arguments

Pull dma-mapping fix from Christoph Hellwig:

 - reduce the initialy dynamic swiotlb size to remove an annoying but
   harmless warning from the page allocator (Petr Tesarik)

* tag 'dma-mapping-6.6-2023-10-28' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: do not try to allocate a TLB bigger than MAX_ORDER pages

Pull char/misc driver fixes from Greg KH:
 "Here are some very small driver fixes for 6.6-final that have shown up
  in the past two weeks. Included in here are:

   - tiny fastrpc bugfixes for reported errors

   - nvmem register fixes

   - iio driver fixes for some reported problems

   - fpga test fix

   - MAINTAINERS file update for fpga

  All of these have been in linux-next this week with no reported
  problems"

* tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  fpga: Fix memory leak for fpga_region_test_class_find()
  fpga: m10bmc-sec: Change contact for secure update driver
  fpga: disable KUnit test suites when module support is enabled
  iio: afe: rescale: Accept only offset channels
  nvmem: imx: correct nregs for i.MX6ULL
  nvmem: imx: correct nregs for i.MX6UL
  nvmem: imx: correct nregs for i.MX6SLL
  misc: fastrpc: Unmap only if buffer is unmapped from DSP
  misc: fastrpc: Clean buffers on remote invocation failures
  misc: fastrpc: Free DMA handles for RPC calls with no arguments
  misc: fastrpc: Reset metadata buffer to avoid incorrect free
  iio: exynos-adc: request second interupt only when touchscreen mode is used
  iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
  iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
  dt-bindings: iio: add missing reset-gpios constrain

Pull i2c fixes from Wolfram Sang:
 "Bugfixes for Axxia when it is a target and for PEC handling of
  stm32f7.

  Plus, fix an OF node leak pattern in the mux subsystem"

* tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: stm32f7: Fix PEC handling in case of SMBUS transfers
  i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node()
  i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node()
  i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node()
  i2c: aspeed: Fix i2c bus hang in slave read

Now that s_umount is never taken under open_mutex update the
documentation to say so.

Link: https://lore.kernel.org/r/20231017184823.1383356-1-hch@lst.deSigned-off-by: Christian Brauner <brauner@kernel.org>

With recent block level changes we should never be in a situation where
we hold disk->open_mutex when calling into these helpers. So assert that
in the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-6-hch@lst.deReviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>

blk_report_disk_dead() has the following major callers:

(1) del_gendisk()
(2) blk_mark_disk_dead()

Since del_gendisk() acquires disk->open_mutex it's clear that all
callers are assumed to be called without disk->open_mutex held.
In turn, blk_report_disk_dead() is called without disk->open_mutex held
in del_gendisk().

All callers of blk_mark_disk_dead() call it without disk->open_mutex as
well.

Ensure that it is clear that blk_report_disk_dead() is called without
disk->open_mutex on purpose by asserting it and a comment in the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-5-hch@lst.deReviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>

disk_check_media_change is mostly called from ->open where it makes
little sense to mark the file system on the device as dead, as we
are just opening it.  So instead of calling bdev_mark_dead from
disk_check_media_change move it into the few callers that are not
in an open instance.  This avoid calling into bdev_mark_dead and
thus taking s_umount with open_mutex held.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-4-hch@lst.deReviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>

The logic for disk->open_partitions is:

blkdev_get_by_*()
-> bdev_is_partition()
   -> blkdev_get_part()
      -> blkdev_get_whole() // bdev_whole->bd_openers++
      -> if (part->bd_openers == 0)
                 disk->open_partitions++
         part->bd_openers

In other words, when we first claim/open a partition we increment
disk->open_partitions and only when all part->bd_openers are closed will
disk->open_partitions be zero. That should mean that
disk->open_partitions is always > 0 as long as there's anyone that
has an open partition.

So the check for disk->open_partitions should mean that we can never
remove an active partition that has a holder and holder ops set. Assert
that in the code. The main disk isn't removed so that check doesn't work
for disk->part0 which is what we want. After all we only care about
partition not about the main disk.

Link: https://lore.kernel.org/r/20231017184823.1383356-3-hch@lst.deReviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>

BLKPG_DEL_PARTITION refuses to delete partitions that still have
openers, i.e., that has an elevated @bdev->bd_openers count. If a device
is claimed by setting @bdev->bd_holder and @bdev->bd_holder_ops
@bdev->bd_openers and @bdev->bd_holders are incremented.
@bdev->bd_openers is effectively guaranteed to be >= @bdev->bd_holders.
So as long as @bdev->bd_openers isn't zero we know that this partition
is still in active use and that there might still be @bdev->bd_holder
and @bdev->bd_holder_ops set.

The only current example is @fs_holder_ops for filesystems. But that
means bdev_mark_dead() which calls into
bdev->bd_holder_ops->mark_dead::fs_bdev_mark_dead() is a nop. As long as
there's an elevated @bdev->bd_openers count we can't delete the
partition and if there isn't an elevated @bdev->bd_openers count then
there's no @bdev->bd_holder or @bdev->bd_holder_ops.

So simply open-code what we need to do. This gets rid of one more
instance where we acquire s_umount under @disk->open_mutex.

Link: https://lore.kernel.org/r/20231016-fototermin-umriss-59f1ea6c1fe6@braunerReviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-2-hch@lst.deReviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>

The implementation of bdev holder operations such as fs_bdev_mark_dead()
and fs_bdev_sync() grab sb->s_umount semaphore under
bdev->bd_holder_lock. This is problematic because it leads to
disk->open_mutex -> sb->s_umount lock ordering which is counterintuitive
(usually we grab higher level (e.g. filesystem) locks first and lower
level (e.g. block layer) locks later) and indeed makes lockdep complain
about possible locking cycles whenever we open a block device while
holding sb->s_umount semaphore. Implement a function
bdev_super_lock_shared() which safely transitions from holding
bdev->bd_holder_lock to holding sb->s_umount on alive superblock without
introducing the problematic lock dependency. We use this function
fs_bdev_sync() and fs_bdev_mark_dead().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231018152924.3858-1-jack@suse.cz
Link: https://lore.kernel.org/r/20231017184823.1383356-1-hch@lst.deReviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>

When sbi->flag is JFS_NOINTEGRITY in lmLogOpen(), log->bdev_handle can't
be inited, so it value will be NULL.
Therefore, add the "log ->no_integrity=1" judgment in lbmStartIO() to avoid such
problems.

Reported-and-tested-by: syzbot+23bc20037854bb335d59@syzkaller.appspotmail.com
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Link: https://lore.kernel.org/r/20231009094557.1398920-1-lizhi.xu@windriver.comReviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Coverity has noticed that the printing of error message in
register_cache() uses already freed bdev_handle to get to bdev. In fact
the problem has been there even before commit "bcache: Convert to
bdev_open_by_path()" just a bit more subtle one - cache object itself
could have been freed by the time we looked at ca->bdev and we don't
hold any reference to bdev either so even that could in principle go
away (due to device unplug or similar). Fix all these problems by
printing the error message before closing the bdev.

Fixes: dc893f51d24a ("bcache: Convert to bdev_open_by_path()")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231004093757.11560-1-jack@suse.czAsked-by: Coly Li <colyli@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Convert xfs to use bdev_open_by_path() and pass the handle around.

CC: "Darrick J. Wong" <djwong@kernel.org>
CC: linux-xfs@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-28-jack@suse.czAcked-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Convert reiserfs to use bdev_open_by_dev/path() and pass the handle
around.

CC: reiserfs-devel@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-27-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert ocfs2 heartbeat code to use bdev_open_by_dev() and pass the
handle around.

CC: Joseph Qi <joseph.qi@linux.alibaba.com>
CC: ocfs2-devel@oss.oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-26-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert block device handling to use bdev_open_by_dev/path() and pass
the handle around.

CC: linux-nfs@vger.kernel.org
CC: Trond Myklebust <trond.myklebust@hammerspace.com>
CC: Anna Schumaker <anna@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-25-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert jfs to use bdev_open_by_dev() and pass the handle around.

CC: Dave Kleikamp <shaggy@kernel.org>
CC: jfs-discussion@lists.sourceforge.net
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-24-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert f2fs to use bdev_open_by_dev/path() and pass the handle around.

CC: Jaegeuk Kim <jaegeuk@kernel.org>
CC: Chao Yu <chao@kernel.org>
CC: linux-f2fs-devel@lists.sourceforge.net
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-23-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert ext4 to use bdev_open_by_dev() and pass the handle around.

CC: linux-ext4@vger.kernel.org
CC: Ted Tso <tytso@mit.edu>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-22-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert erofs to use bdev_open_by_path() and pass the handle around.

CC: Gao Xiang <xiang@kernel.org>
CC: Chao Yu <chao@kernel.org>
CC: linux-erofs@lists.ozlabs.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-21-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert btrfs to use bdev_open_by_path() and pass the handle around.  We
also drop the holder from struct btrfs_device as it is now not needed
anymore.

CC: David Sterba <dsterba@suse.com>
CC: linux-btrfs@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-20-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert mount code to use bdev_open_by_dev() and propagate the handle
around to bdev_release().
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-19-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert swapping code to use bdev_open_by_dev() and pass the handle
around.

CC: linux-mm@kvack.org
CC: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-18-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

snapshot_test argument is now unused in swsusp_close() and
load_image_and_restore(). Drop it

CC: linux-pm@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-17-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert hibernation code to use bdev_open_by_dev().

CC: linux-pm@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-16-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert iblock and pscsi drivers to use bdev_open_by_path() and pass the
handle around.

CC: target-devel@vger.kernel.org
CC: linux-scsi@vger.kernel.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-15-jack@suse.czReviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Convert dasd to use bdev_open_by_path() and pass the handle around.

CC: linux-s390@vger.kernel.org
CC: Christian Borntraeger <borntraeger@linux.ibm.com>
CC: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-14-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert nvmet to use bdev_open_by_path() and pass the handle around.

CC: linux-nvme@lists.infradead.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-13-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert block2mtd to use bdev_open_by_dev() and bdev_open_by_path() and
pass the handle around.

CC: Joern Engel <joern@lazybastard.org>
CC: linux-mtd@lists.infradead.org
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-12-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert md to use bdev_open_by_dev() and pass the handle around. We also
don't need the 'Holder' flag anymore so remove it.

CC: linux-raid@vger.kernel.org
CC: Song Liu <song@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-11-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert device mapper to use bdev_open_by_dev() and pass the handle
around.

CC: Alasdair Kergon <agk@redhat.com>
CC: Mike Snitzer <snitzer@kernel.org>
CC: dm-devel@redhat.com
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-10-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert bcache to use bdev_open_by_path() and pass the handle around.

CC: linux-bcache@vger.kernel.org
CC: Coly Li <colyli@suse.de>
CC: Kent Overstreet <kent.overstreet@gmail.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-9-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>

Convert zram to use bdev_open_by_dev() and pass the handle around.

CC: Minchan Kim <minchan@kernel.org>
CC: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-8-jack@suse.czSigned-off-by: Christian Brauner <brauner@kernel.org>