- 30 Jan, 2008 40 commits
-
-
Ingo Molnar authored
Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Ingo Molnar authored
NOP change. Signed-off-by:
-
Ingo Molnar authored
These are useful in figuring out early-mapping problems. Signed-off-by:
-
Arjan van de Ven authored
printk_address()'s second parameter is the reliability indication, not the ebp. If we're printing regs->ip we're reliable by definition, so pass a 1 here. Signed-off-by: Arjan van de Ven Signed-off-by:
-
Arjan van de Ven authored
The 32 bit x86 tree has a very useful feature that prints the Code: line for the code even before the trapping instrution (and the start of the trapping instruction is then denoted with a <>). Unfortunately, the 64 bit x86 tree does not yet have this feature, making diagnosing backtraces harder than needed. This patch adds this feature in the same was as the 32 bit tree has (including the same kernel boot parameter), and including a bugfix to make the code use probe_kernel_address() rarther than a buggy (deadlocking) __get_user. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Arjan van de Ven authored
During the work on the x86 32 and 64 bit backtrace code I found it useful to have a simple test module to test a process and irq context backtrace. Since the existing backtrace code was buggy, I figure it might be useful to have such a test module in the kernel so that maybe we can even detect such bugs earlier.. [ mingo@elte.hu: build fix ] Signed-off-by:
-
Arjan van de Ven authored
x86 32 bit already has this feature: This patch uses the stack frames with frame pointer into an exact stack trace, by following the frame pointer. This only affects kernels built with the CONFIG_FRAME_POINTER config option enabled, and greatly reduces the amount of noise in oopses. This code uses the traditional method of doing backtraces, but if it finds a valid frame pointer chain, will use that to show which parts of the backtrace are reliable and which parts are not Due to the fragility and importance of the backtrace code, this needs to be well reviewed and well tested before merging into mainlne. Signed-off-by:
-
Arjan van de Ven authored
This patch turns the x86 64 bit HANDLE_STACK macro in the backtrace code into a function, just like 32 bit has. This is needed pre work in order to get exact backtraces for CONFIG_FRAME_POINTER to work. The function and it's arguments are not the same as 32 bit; due to the exception/interrupt stack way of x86-64 there are a few differences. This patch should not have any behavior changes, only code movement. Due to the fragility and importance of the backtrace code, this needs to be well reviewed and well tested before merging into mainlne. Signed-off-by:
-
Arjan van de Ven authored
Right now, we take the stack pointer early during the backtrace path, but only calculate bp several functions deep later, making it hard to reconcile the stack and bp backtraces (as well as showing several internal backtrace functions on the stack with bp based backtracing). This patch moves the bp taking to the same place we take the stack pointer; sadly this ripples through several layers of the back tracing stack, but it's not all that bad in the end I hope. Signed-off-by:
-
Arjan van de Ven authored
The 32 bit Frame Pointer backtracer code checks if the EBP is valid to do a backtrace; however currently on a failure it just gives up and prints nothing. That's not very nice; we can do better and still print a decent backtrace. This patch changes the backtracer to use the regular backtracing algorithm at the same time as the EBP backtracer; the EBP backtracer is basically used to figure out which part of the backtrace are reliable vs those which are likely to be noise. Signed-off-by:
-
Arjan van de Ven authored
For enhancing the 32 bit EBP based backtracer, I need the capability for the backtracer to tell it's customer that an entry is either reliable or unreliable, and the backtrace printing code then needs to print the unreliable ones slightly different. This patch adds the basic capability, the next patch will add a user of this capability. Signed-off-by:
-
Arjan van de Ven authored
The current x86 32 bit FRAME_POINTER chasing code has a nasty bug in that the EBP tracer doesn't actually update the value of EBP it is tracing, so that the code doesn't actually switch to the irq stack properly. The result is a truncated backtrace: WARNING: at timeroops.c:8 kerneloops_regression_test() (Not tainted) Pid: 0, comm: swapper Not tainted 2.6.24-0.77.rc4.git4.fc9 #1 [<c040649a>] show_trace_log_lvl+0x1a/0x2f [<c0406d41>] show_trace+0x12/0x14 [<c0407061>] dump_stack+0x6c/0x72 [<e0258049>] kerneloops_regression_test+0x44/0x46 [timeroops] [<c04371ac>] run_timer_softirq+0x127/0x18f [<c0434685>] __do_softirq+0x78/0xff [<c0407759>] do_softirq+0x74/0xf7 ======================= This patch fixes the code to update EBP properly, and to check the EIP before printing (as the non-framepointer backtracer does) so that the same test backtrace now looks like this: WARNING: at timeroops.c:8 kerneloops_regression_test() Pid: 0, comm: swapper Not tainted 2.6.24-rc7 #4 [<c0405d17>] show_trace_log_lvl+0x1a/0x2f [<c0406681>] show_trace+0x12/0x14 [<c0406ef2>] dump_stack+0x6a/0x70 [<e01f6040>] kerneloops_regression_test+0x3b/0x3d [timeroops] [<c0426f07>] run_timer_softirq+0x11b/0x17c [<c04243ac>] __do_softirq+0x42/0x94 [<c040704c>] do_softirq+0x50/0xb6 [<c04242a9>] irq_exit+0x37/0x67 [<c040714c>] do_IRQ+0x9a/0xaf [<c04057da>] common_interrupt+0x2e/0x34 [<c05807fe>] cpuidle_idle_call+0x52/0x78 [<c04034f3>] cpu_idle+0x46/0x60 [<c05fbbd3>] rest_init+0x43/0x45 [<c070aa3d>] start_kernel+0x279/0x27f ======================= This shows that the backtrace goes all the way down to user context now. This bug was found during the port to 64 bit of the frame pointer backtracer. Signed-off-by:
-
Ingo Molnar authored
Enable CONFIG_EMBEDDED to select CONFIG_EARLY_PRINTK on 64-bit as well. saves ~2K: text data bss dec hex filename 7290283 3672091 1907848 12870222 c4624e vmlinux.before 7288373 3671795 1907848 12868016 c459b0 vmlinux.after Signed-off-by:
-
Roland McGrath authored
It's not too pretty, but I found this made the "PANIC: early exception" messages become much more reliably useful: 1. print the vector number, 2. print the %cs value, 3. handle error-code-pushing vs non-pushing vectors. Signed-off-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
Randy Dunlap authored
Fix section mismatches. discover_ebda() can be __init. WARNING: vmlinux.o(.text+0x738a): Section mismatch: reference to .init.data:ebda_addr (between 'discover_ebda' and 'get_model_name') WARNING: vmlinux.o(.text+0x73c4): Section mismatch: reference to .init.data:ebda_size (between 'discover_ebda' and 'get_model_name') Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Thomas Gleixner authored
The check for an unitialized clock event device triggers, when the local apic timer is registered as a dummy clock event device for broadcasting. Preset the multiplicator to avoid a false positive. Signed-off-by:
-
Thomas Gleixner authored
Check the APIC timer calibration result for sanity. When the frequency is out of range, issue a warning and disable the local APIC timer. Signed-off-by:
-
H. Peter Anvin authored
The GDT_ENTRY() macro in pm.c would incorrectly cut the bottom 8 bits off the base. We didn't define any bases with the bottom 8 bits nonzero, so it is a non-manifest bug, but it's still a bug. Pointed out by John Smith <johnsmith9344@gmail.com>. Cc: John Smith <johnsmith9344@gmail.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
H. Peter Anvin authored
If we use the bootloader-provided stack pointer, we might end up in a situation where the bootloader (incorrectly) pointed the stack in the middle of our heap. Catch this by simply comparing the computed heap end value to the stack pointer minus the defined stack size. Signed-off-by:
-
H. Peter Anvin authored
Push video mode setup as late as possible; messages issued through the BIOS interface after video mode setup will either not be seen (for framebuffer modes) or will screw up the cursor (for text modes.) In particular, this makes the EDD probing message show up correctly. Signed-off-by:
-
H. Peter Anvin authored
Tell the user to specify edd=off in the case of EDD probing hangs. Per LKML discussion. Signed-off-by:
-
H. Peter Anvin authored
Add prototype for cmdline_find_option_bool() missing from: x86 setup: early cmdline parser handle boolean options Also, fix up a minor formatting error in that patch. Signed-off-by: -
H. Peter Anvin authored
Unnecessary capitals are shouting; no need for it here. Thus, change "OK" to "ok" and add a space. Signed-off-by:
-
devzero@web.de authored
On early boot, probing the Bios for EDD happens without any message. Enhanced Disk Drive Services (EDD) is a mechanism to match x86 BIOS device names (int13 device 80h) to Linux device names (e.g. /dev/sda, /dev/hda) There are buggy Bios out there having problems with EDD. This can be problems with the Bios itself or with addon cards, too. This patch is adds an informational message on early boot. CONFIG_EDD is not set with defconfig, but with allmodconfig (i.e. CONFIG_EDD=m) so the EDD probe may be active on early boot on many systems nowadays. I can tell, that the probe is active on SuSE distro and with that I have seen more than one system hanging endlessly with those "black screen with a blinking cursor in the the upper left" on installation, making it difficult for the end- user to find out, what`s the issue. For sure I have seen this on FujitsuSiemens PCs with i810 and with i815 chipset. This one also honours the "quiet" bootparam. Also see: http://marc.info/?l=linux-kernel&m=119781937207969&w=2 http://marc.info/?l=linux-kernel&m=119783934032326&w=2 http://marc.info/?l=linux-kernel&m=119783678529100&w=2Signed-off-by:
Roland Kletzing <devzero@web.de> Signed-off-by:
-
devzero@web.de authored
This patch extends the early commandline parser to support boolean options. The current version in mainline only supports parsing "option=arg" value pairs. With this it should be easy making other messages like "Uncompressing kernel" honour the "quiet" parameter, too. Signed-off-by:
-
H. Peter Anvin authored
Fix the operand constraints for the segment accessor functions, {rd,wr}{fs,gs}*. In particular, the 8-bit functions used "r" constraints instead of "q" constraints. Signed-off-by: -
H. Peter Anvin authored
Display VESA graphics modes, with their mode IDs, in the vga=ask menu. Most VESA mode numbers are platform-dependent, so it helps to have an easy way to display them. Based in part on a patch by Petr Vandrovec <petr@vandrovec.name>. Cc: Petr Vandrovec <petr@vandrovec.name> Signed-off-by:
-
H. Peter Anvin authored
To set CR0.PE, use the X86_CR0_PE macro defined in <asm/processor-flags.h> instead of hardcoding it as a constant (1). Signed-off-by:
-
H. Peter Anvin authored
Intel VT doesn't like to engage when the protected-mode state isn't fully initialized. Make life easier for it by initializing LDTR (to null) and TR (to a dummy hunk of low memory which will never actually be touched.) Signed-off-by:
-
H. Peter Anvin authored
Make the transition to protected mode more paranoid by having back-to-back near jump (to synchronize the 386/486 prefetch queue) and far jump (to set up the code segment.) While we're at it, zero as many registers as practical (for future expandability of the 32-bit entry interface) and enter 32-bit mode with a valid stack. Note that the 32-bit code cannot rely on this stack, or we'll break all other existing users of the 32-bit entrypoint, but it may make debugging hacks easier to write. Signed-off-by:
-
H. Peter Anvin authored
The boot GDT entries are common between 32- and 64-bit mode, so move them to common code instead of having two identical copies. Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Acked-by:
Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by:
-
Harvey Harrison authored
get_segment_eip has similarities to convert_rip_to_linear(), and is used in a similar context. Move get_segment_eip to step.c to allow easier consolidation. Signed-off-by:
-
Hiroshi Shimamoto authored
Move out tick_nohz_stop_sched_tick() call from the loop in cpu_idle same as 32-bit version. Signed-off-by:
Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by:
-
Ingo Molnar authored
introduce the "asmregparm" calling convention: for functions implemented in assembly with a fixed regparm input parameters calling convention. mark the semaphore and rwsem slowpath functions with that. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Nick Piggin authored
This implements ticket lock support for more than 255 CPUs on x86. The code gets switched according to the configured NR_CPUS. Signed-off-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Paolo Ciarrocchi authored
Simple coding style fixes. no code changed: text data bss dec hex filename 3139 576 194 3909 f45 fixup.o.before 3139 576 194 3909 f45 fixup.o.after md5: 9a3467057478b2d99962bdd448282eeb fixup.o.before.asm 9a3467057478b2d99962bdd448282eeb fixup.o.after.asm Signed-off-by:
Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Signed-off-by:
-
Harvey Harrison authored
Use the fixup_exception() helper instead of the open-coded search_extable() users. Signed-off-by:
-
Harvey Harrison authored
Should be the last of the error_code tests that could use the PF_ defines. Makes X86_32|64 a little closer. Signed-off-by:
-
Harvey Harrison authored
Small step towards unifying traps_32|64.c. No functional changes. Pull out a small helper from an if() statement in die(). Marked as __kprobes as eventually we will want to call this from do_page_fault similar to how X86_64 does it. Signed-off-by:
-
