From: Roger Luethi <rl@hellgate.ch>

From: Arkadiusz Miskiewicz
Signed-off-by: Arkadiusz Miskiewicz <arekm@pld-linux.org>
Signed-off-by: Roger Luethi <rl@hellgate.ch>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Kumar Gala <galak@somerset.sps.mot.com>

Fix usage of printk on the output of mac address.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Alexander Shatohin <ash@tsi.lv>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Francois Romieu <romieu@fr.zoreil.com>

If the Rx buffer gets corrupted or the FIFO hangs in new interesting ways,
this code prevents the driver from looping in ksoftirqd context without
making any progress.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Francois Romieu <romieu@fr.zoreil.com>

This patch allows to update the interrupt status register after an Rx
overflow or a Rx fifo error even when the Rx buffer contains no packet.
The update must be kept in the packet processing loop to prevent an Rx
error storm.  As an interesting behavior, the status of the interrupt
status register must not be read early.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Francois Romieu <romieu@fr.zoreil.com>

Copy/paste abuse.
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Jesper Juhl <juhl-lkml@dif.dk>

To silence the warning in $subject, rename log2 to cycx_log2 in this file
to remove the clash, so there's no doubt that this file uses it's own
defined log2 function.
Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Adrian Bunk <bunk@fs.tum.de>

drivers/net/hamradio/dmascc.c: In function `scc_isr':
drivers/net/hamradio/dmascc.c:250: sorry, unimplemented: inlining
failed in call to 'z8530_isr': function body not available
drivers/net/hamradio/dmascc.c:969: sorry, unimplemented: called from
here
drivers/net/hamradio/dmascc.c:250: sorry, unimplemented: inlining
failed in call to 'z8530_isr': function body not available
drivers/net/hamradio/dmascc.c:978: sorry, unimplemented: called from
here
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Adrian Bunk <bunk@fs.tum.de>

drivers/net/sk98lin/skge.c: In function `skge_remove_one':
drivers/net/sk98lin/skge.c:5116: warning: implicit declaration of function `remove_proc_entry'
drivers/net/sk98lin/skge.c:5116: `pSkRootDir' undeclared (first use in this function)
drivers/net/sk98lin/skge.c:5116: (Each undeclared identifier is reported only once
drivers/net/sk98lin/skge.c:5116: for each function it appears in.)
drivers/net/sk98lin/skge.c: In function `skge_init':
drivers/net/sk98lin/skge.c:5188: `SK_Root_Dir_entry' undeclared (first use in this function)
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Francois Romieu <romieu@fr.zoreil.com>

There is no guarantee that the event which gets passed is associated to a
via-velocity device, thus preventing to dereference dev->priv as if it
always was a struct velocity_info *.  The via-velocity devices are kept in
a module private list for comparison.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Adrian Bunk <bunk@fs.tum.de>

drivers/net/ixgb/ixgb_main.c: In function `ixgb_up':
drivers/net/ixgb/ixgb_main.c:86: sorry, unimplemented: inlining failed
in call to 'ixgb_irq_enable': function body not available
drivers/net/ixgb/ixgb_main.c:234: sorry, unimplemented: called from here
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Adrian Bunk <bunk@fs.tum.de>

  CC      drivers/net/tulip/dmfe.o
drivers/net/tulip/dmfe.c: In function `dmfe_rx_packet':
drivers/net/tulip/dmfe.c:323: sorry, unimplemented: inlining failed in
call to 'cal_CRC': function body not available
drivers/net/tulip/dmfe.c:936: sorry, unimplemented: called from here
make[3]: *** [drivers/net/tulip/dmfe.o] Error 1
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Adrian Bunk <bunk@fs.tum.de>

  CC      drivers/net/rrunner.o
drivers/net/rrunner.c: In function `rr_timer':
drivers/net/rrunner.h:846: sorry, unimplemented: inlining failed in call
to 'rr_raz_tx': function body not available
drivers/net/rrunner.c:1155: sorry, unimplemented: called from here
drivers/net/rrunner.h:847: sorry, unimplemented: inlining failed in call
to 'rr_raz_rx': function body not available
drivers/net/rrunner.c:1156: sorry, unimplemented: called from here
make[2]: *** [drivers/net/rrunner.o] Error 1
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Adrian Bunk <bunk@fs.tum.de>

  CC      drivers/net/hamachi.o
drivers/net/hamachi.c: In function `hamachi_interrupt':
drivers/net/hamachi.c:562: sorry, unimplemented: inlining failed in call
to 'hamachi_rx': function body not available
drivers/net/hamachi.c:1402: sorry, unimplemented: called from here
make[2]: *** [drivers/net/hamachi.o] Error 1
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Adrian Bunk <bunk@fs.tum.de>

  CC      drivers/net/smc9194.o
drivers/net/smc9194.c: In function `smc_interrupt':
drivers/net/smc9194.c:278: sorry, unimplemented: inlining failed in call
to 'smc_rcv': function body not available
drivers/net/smc9194.c:1254: sorry, unimplemented: called from here
drivers/net/smc9194.c:283: sorry, unimplemented: inlining failed in call
to 'smc_tx': function body not available
drivers/net/smc9194.c:1258: sorry, unimplemented: called from here
make[2]: *** [drivers/net/smc9194.o] Error 1
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Nick Orlov <bugfixer@list.ru>

e1000 fixes for gcc-3.4.1
Signed-off-by: Andrew Morton <akpm@osdl.org>

drivers/net/e1000/e1000_main.c: In function `e1000_up':
drivers/net/e1000/e1000_main.c:136: sorry, unimplemented: inlining failed
in call to 'e1000_irq_enable': function body not available
drivers/net/e1000/e1000_main.c:274: sorry, unimplemented: called from here
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Christoph Hellwig <hch@infradead.org>

sk98line tries to register a procfile with the interfacename of the struct
net_device.  The patch below (ontop of the previous one) makes it work
unless you change the interface name manually, but as Linux explicitly
allows that the interface is fundamentally broken and probably should just
go away.
Signed-off-by: Andrew Morton <akpm@osdl.org>

From: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

cc-version needs to use $(shell to get the gcc version.
Before if gave the following error when building the kernel:

/bin/sh: line 1: [: too many arguments

And all checks for gcc version were broken.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

into mars.ravnborg.org:/home/sam/bk/kbuild

into mars.ravnborg.org:/home/sam/bk/kbuild

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Forgot one command, GPCMD_SEND_CUE_SHEET is also ok for write open.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

If tty_open() fails for a normal serial device, we end up doing cleanups
that should only happen for failed open of /dev/ptmx.  The results are
not pretty - devpts et.al.  end up very confused.  That's what gave
problems with ptmx.

This splits ptmx file_operations from the normal case and cleans up both
tty_open() and (new) ptmx_open().  Survived serious beating.

Update architectures for the free_area_init_node() API change.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

That conversion to nfs_fh_copy() is bogus since we're not copying into
an nfs_fh anyway. Just revert it.

The patch below replaces all occurences of two bouncing email addresses of
Alex deVries in the kernel with his current address.

It's already ACK'ed by Alex deVries.
Signed-off-by: Adrian Bunk <bunk@fs.tum.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Describe what the Intel cache descriptors actually mean in comments.  Taken
from 24151827.pdf.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The patch below fixes an interesting oddity we're seeing with fedora core
development (where we recently started using udev heavily); basically right
now filelock_init() is a module_init(), eg runs late.  However that breaks
down because there are earlier /sbin/hotplug callouts, which with udev, do
locking operations.  When that happens the kernel oopses because the slabs
for file locks aren't initialized yet.

Solution: initialize this way early.  It's only a kmem_cache_create after
all, so can happen early.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This entry was removed during 2.5 development.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This entry is long gone, even 2.4 doesnt have it anymore.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

ncfpfs seems to update inode times by hand everywhere instead of using
the proper helpers.  This means:

 - the atime updates in mmap() and read() seems to miss various checks
   upodate_atime or one of the wrappers does.  Also it doesn't mark the
   inode dirty.
 - in write() you update mtime and _a_time instead of ctime as expected,
   also the usual checks and optimizations are missing.

In addition the fops contain some bogus checks like for a refular file (but
the fops are only used of ISREG files) and inode->i_sb although that is
guranteed to be non-zero.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

  The patch below enable to display the size of Active/Inactive pages on
  per-node meminfo (/sys/devices/system/node/node%d/meminfo) like
  /proc/meminfo.

  By a little change to procps, "vmstat -a" can show these statistics about
  particular node.

From: mita akinobu <amgta@yacht.ocn.ne.jp>

  get_zone_counts() is used by max_sane_readahead(), and
  max_sane_readahead() is often called in filemap_nopage().
Signed-off-by: Akinobu Mita <amgta@yacht.ocn.ne.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Recently, someone has kvetched that RNDGETPOOL is a "security
vulnerability".  Never mind that it is superuser only, and with superuser
privs you could load a nasty kernel module, or read the entropy pool out of
/dev/mem directly, but they are nevertheless still spreading FUD.

In any case, no one is using it (it was there for debugging purposes only),
so we can remove it as dead code.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds a separate pool for use with /dev/urandom.  This prevents a
/dev/urandom read from being able to completely drain the entropy in the
/dev/random pool, and also makes it much more difficult for an attacker to
carry out a state extension attack.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This adds a pool name to the entropy_store data structure, which simplifies
the debugging code, and makes the code more generic for adding additional
entropy pools.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>