Pull SCSI target fixes from Nicholas Bellinger:
 "Here are the target pending fixes for v3.17-rc6.

  Included are Sagi's long overdue fixes related to iser-target
  shutdown, along with a couple of fixes from Sebastian related to ALUA
  Referrals changes that when in during the v3.14 time-frame.

  Also included are a few iscsi-target fixes, most recently of which
  where found during Joern's Coverity scanning of target code"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  iscsi-target: avoid NULL pointer in iscsi_copy_param_list failure
  iscsi-target: Fix memory corruption in iscsit_logout_post_handler_diffcid
  target: Fix inverted logic in SE_DEV_ALUA_SUPPORT_STATE_STORE
  target: Fix user data segment multiplier in spc_emulate_evpd_b3()
  iscsi-target: Ignore ICF_GOT_LAST_DATAOUT during Data-Out ITT lookup
  Target/iser: Fix initiator_depth and responder_resources
  Target/iser: Avoid calling rdma_disconnect twice
  Target/iser: Don't put isert_conn inside disconnected handler
  Target/iser: Get isert_conn reference once got to connected_handler

Pull drm fixes from Dave Airlie:
 "A bunch of radeon fixes for oops on module unload, and problems with
  resetting the dma engine, one nouveau fix for black boxes in rendering
  on my mbp retina, one sti fix, and a couple of intel fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nouveau: ltc/gf100-: fix cbc issues on certain boards
  drm/bochs: add missing drm_connector_register call
  drm/cirrus: add missing drm_connector_register call
  drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page
  drm/nouveau/runpm: fix module unload
  drm/radeon/px: fix module unload
  vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops
  drm/radeon: don't reset dma on r6xx-evergreen init
  drm/radeon: don't reset sdma on CIK init
  drm/radeon: don't reset dma on NI/SI init
  drm/radeon/dpm: fix resume on mullins
  drm/radeon: Disable HDP flush before every CS again for < r600
  drm/radeon: delete unused PTE_* defines
  drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chv
  drm: sti: do not iterate over the info frame array
  drm/i915: Fix SRC_COPY width on 830/845g

A mismatch between FB and LTC's idea of how big a large page is causes
issues such as black "holes" in rendering to occur on some boards
(those where LTC is configured for 64KiB large pages) when compression
is used.

Confirmed to fix at least the GK107 MBP.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

single fix for regression on rs4xx/rs690/rs740
* 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull btrfs fixes from Chris Mason:
 "I've got a revert to fix a regression with btrfs device registration,
  and Filipe has part two of his fsync fix from last week"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Revert "Btrfs: device_list_add() should not update list when mounted"
  Btrfs: set inode's logged_trans/last_log_commit after ranged fsync

Pull NFS client fixes from Trond Myklebust:
 "Highligts:
   - fix an Oops in nfs4_open_and_get_state
   - fix an Oops in the nfs4_state_manager
   - fix another bug in the close/open_downgrade code"

* tag 'nfs-for-3.17-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: Fix another bug in the close/open_downgrade code
  NFSv4: nfs4_state_manager() vs. nfs_server_remove_lists()
  NFS: remove BUG possibility in nfs4_open_and_get_state

Pull PCI fixes from Bjorn Helgaas:
 "These fix:

   - Boot video device detection on dual-GPU Apple systems
   - Hotplug fiascos on VGA switcheroo with radeon & nouveau drivers
   - Boot hang on Freescale i.MX6 systems
   - Excessive "no hotplug settings from platform" warnings

  In particular:

  Enumeration
    - Don't default exclusively to first video device (Bruno Prémont)

  PCI device hotplug
    - Remove "no hotplug settings from platform" warning (Bjorn Helgaas)
    - Add pci_ignore_hotplug() for VGA switcheroo (Bjorn Helgaas)

  Freescale i.MX6
    - Put LTSSM in "Detect" state before disabling (Lucas Stach)"

* tag 'pci-v3.17-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  vgaarb: Drop obsolete #ifndef
  vgaarb: Don't default exclusively to first video device with mem+io
  ACPIPHP / radeon / nouveau: Remove acpi_bus_no_hotplug()
  PCI: Remove "no hotplug settings from platform" warning
  PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device
  PCI: imx6: Put LTSSM in "Detect" state before disabling it
  MAINTAINERS: Add Lucas Stach as co-maintainer for i.MX6 PCI driver

Pull SCSI fixes from James Bottomley:
 "This is a set of three fixes.

  One represents a nasty shared tag map regression (another inverted
  condition) caused by recent SCSI MQ patches, one is a longstanding
  potential buffer overrun in the iscsi data buffer and the final one is
  a use after free for the rare bidirectional commands"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] fix for bidi use after free
  [SCSI] fix regression that accidentally disabled block-based tcq
  [SCSI] libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu

Pull perf fixes from Ingo Molnar:
 "Two kernel side fixes: a kprobes fix and a perf_remove_from_context()
  fix (which does not yet fix the migration bug which is WIP)"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix a race condition in perf_remove_from_context()
  kprobes/x86: Free 'optinsn' cache when range check fails

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

  EFI fixes, a build fix, a page table dumping (debug) fix and a clang
  build fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/arm64: Fix fdt-related memory reservation
  x86/mm: Apply the section attribute to the variable, not its type
  x86/efi: Fixup GOT in all boot code paths
  x86/efi: Only load initrd above 4g on second try
  x86-64, ptdump: Mark espfix area only if existent
  x86, irq: Fix build error caused by 9eabc99a

Pull MIPS fixes from Ralf Baechle:
 "A fair number of build fixes for various configurations.

  Fixes to BPF, and the BCM47xx platform code, a preemption fix for the
  Loongson core, a syscall auditing fix, wire up the new getrandom and
  memfd_create.  Several patches for EVA"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (30 commits)
  MIPS: SmartMIPS: Disable assembler warnings
  MIPS: Move CPU topology macros to topology.h
  MIPS: Wire up new syscalls getrandom and memfd_create.
  MIPS: Fix a warning for virt_to_page
  arch/mips/net/bpf_jit.c: fix failure check
  MIPS: COP2: CPP macro safety fixes.
  MIPS: Kconfig: Select SMP symbols for CMP
  MIPS: ZBOOT: add missing <linux/string.h> include
  MIPS: IP28: Fix/clean spaces.h
  MIPS: IP28: Select correct L1_CACHE_SHIFT
  MIPS: BCM63xx: delete double assignment
  MIPS: Spelling s/confugrations/configurations/
  MIPS: OCTEON: make get_system_type() thread-safe
  MIPS: CPS: Initialize EVA before bringing up VPEs from secondary cores
  MIPS: Malta: EVA: Rename 'eva_entry' to 'platform_eva_init'
  MIPS: EVA: Add new EVA header
  MIPS: scall64-o32: Fix indirect syscall detection
  MIPS: syscall: Fix AUDIT value for O32 processes on MIPS64
  MIPS: Loongson: Fix COP2 usage for preemptible kernel
  MIPS: NL: Fix nlm_xlp_defconfig build error
  ...

When ending a bi-directionional SCSI request, blk_finish_request()
cleans up and frees the request, but scsi_release_bidi_buffers() tries
to indirect through the request to find it's data buffers.  This causes
a panic due to a null pointer dereference.

Move the call to scsi_release_bidi_buffers() before the call to
blk_finish_request().
Signed-off-by: Daniel Gryniewicz <dang@linuxbox.com>
Reviewed-by: Webb Scales <webbnh@hp.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

The scsi blk-mq support accidentally flipped a conditional, which lead to
never enabling block based tcq when using the legacy request path.

Fixes: d285203c scsi: add support for a blk-mq based I/O path.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

This patches fixes a potential buffer overrun in __iscsi_conn_send_pdu.
This function is used by iscsi drivers and userspace to send iscsi PDUs/
commands. For login commands, we have a set buffer size. For all other
commands we do not support data buffers.

This was reported by Dan Carpenter here:
http://www.spinics.net/lists/linux-scsi/msg66838.htmlReported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

* pci/vga:
  vgaarb: Drop obsolete #ifndef
  vgaarb: Don't default exclusively to first video device with mem+io

* commit '6a73336b':
  PCI: Remove "no hotplug settings from platform" warning

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83996Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

couple of display fixes.

* tag 'drm-intel-fixes-2014-09-18' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Add limited color range readout for HDMI/DP ports on g4x/vlv/chv
  drm/i915: Fix SRC_COPY width on 830/845g

- fix a resume hang on mullins
- fix an oops on module unload with vgaswitcheroo (radeon and nouveau)
- fix possible hangs DMA engine hangs due to hw bugs

* 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux:
  drm/nouveau/runpm: fix module unload
  drm/radeon/px: fix module unload
  vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops
  drm/radeon: don't reset dma on r6xx-evergreen init
  drm/radeon: don't reset sdma on CIK init
  drm/radeon: don't reset dma on NI/SI init
  drm/radeon/dpm: fix resume on mullins
  drm/radeon: Disable HDP flush before every CS again for < r600
  drm/radeon: delete unused PTE_* defines

Use the new vga_switcheroo_fini_domain_pm_ops function
to unregister the pm ops.

Based on a patch from:
Pali Rohár <pali.rohar@gmail.com>

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=84431Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Cc: Ben Skeggs <bskeggs@redhat.com>

Use the new vga_switcheroo_fini_domain_pm_ops function
to unregister the pm ops.

Based on a patch from:
Pali Rohár <pali.rohar@gmail.com>

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=84431Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>

Drivers should call this on unload to unregister pmops.

Bug:
https://bugzilla.kernel.org/show_bug.cgi?id=84431Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>

Otherwise we may lose the DMA golden settings which can
lead to hangs, etc.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Otherwise we may lose the DMA golden settings which can
lead to hangs, etc.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Otherwise we may lose the DMA golden settings which can
lead to hangs, etc.

bug:
https://www.libreoffice.org/bugzilla/show_bug.cgi?id=83500Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Need to properly disable nb dpm on dpm disable.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

It was causing display corruption with R300 generation GPUs at least.
Reported-and-Tested-by: Mikael Pettersson <mikpelinux@gmail.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

They don't appear to be used anywhere... elsewhere uses R*_PTE_*.

master@linux:U:.% git grep PTE_ -- drivers/gpu/drm/radeon | grep -v _PTE_
master@linux:U:.%	(kyle@redacted:~/linux)

./arch/arm64/include/asm/pgtable.h:27:0: note: this is the location of the previous definition
 #define PTE_VALID  (_AT(pteval_t, 1) << 0)
 ^
In file included from drivers/gpu/drm/radeon/r600_cs.c:31:0:
drivers/gpu/drm/radeon/r600d.h:48:0: warning: "PTE_VALID" redefined [enabled by default]
 #define PTE_VALID    (1 << 0)
 ^
In file included from ./arch/arm64/include/asm/io.h:29:0,
                 from include/linux/clocksource.h:19,
                 from include/clocksource/arm_arch_timer.h:19,
                 from ./arch/arm64/include/asm/arch_timer.h:27,
                 from ./arch/arm64/include/asm/timex.h:19,
                 from include/linux/timex.h:65,
<snip>
                 from include/drm/drmP.h:51,
                 from drivers/gpu/drm/radeon/r600_cs.c:29:
./arch/arm64/include/asm/pgtable.h:27:0: note: this is the location of the previous definition
 #define PTE_VALID  (_AT(pteval_t, 1) << 0)
 ^
Signed-off-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull cifs/smb3 fixes from Steve French:
 "Fixes for problems found during testing and debugging at the SMB3
  storage test event (plugfest) this week"

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
  Fix mfsymlinks file size check
  Update version number displayed by modinfo for cifs.ko
  cifs: remove dead code
  Revert "cifs: No need to send SIGKILL to demux_thread during umount"
  [SMB3] Fix oops when creating symlinks on smb3
  [CIFS] Fix setting time before epoch (negative time values)

Pull sound fixes from Takashi Iwai:
 "All small fixes in random various drivers, mostly for ASoC at this
  time, which look reasonable for a high rc number"

* tag 'sound-3.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: rockchip-i2s: dt: swap tx and rx channed request number in example
  ASoC: rockchip-i2s: fix registers' property of rockchip i2s controller
  ASoC: rockchip-i2s: fix master mode set bit error
  ASoC: cs4265: Fix register address to set the proper data type.
  ALSA: hda - Fix invalid pin powermap without jack detection
  ASoC: soc-pcm: fix dpcm_path_get error handling
  ASoC: samsung-i2s: Check secondary DAI exists before referencing
  ASoC: Update email id of the author
  ASoC: dwc: Update email id of the author
  ASoC: davinci-mcasp: Correct rx format unit configuration
  ASoC: tlv320aic31xx: Fix 24bit samples with I2S format and 12MHz mclk

dma_pool_create() needs to unlock the mutex in error case.  The bug was
introduced in the 3.16 by commit cc6b664a ("mm/dmapool.c: remove
redundant NULL check for dev in dma_pool_create()")/
Signed-off-by: Krzysztof Hałasa <khc@piap.pl>
Cc: stable@vger.kernel.org  # v3.16
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull regulator fix from Mark Brown:
 "Fix some leaked OF node references in regulator drivers that have been
  left over following a fix on a fix to the reference counting"

* tag 'regulator-v3.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: remove unnecessary of_node_get() to parent

Pull spi fixes from Mark Brown:
 "A few driver specific fixes for v3.17:

   - Fix davinci so that GPIO chip selects work with deferred probe of
     GPIOs (which could happen in production depending on kernel config)
     plus one incremental stylistic fix to that.
   - Several fixes for the newly introduced rockchip driver that came up
     in wider testing of the device.
   - A couple of small things in the sirf driver, one bug that would
     stop DMA transfers working and another update to follow the
     documented procedure in the datasheet.
   - Fix some memory leaks with devm_kzalloc() being used outside of the
     device bind path"

* tag 'spi-v3.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: davinci: remove empty function davinci_spi_cleanup
  spi: davinci: request cs_gpio's from probe
  spi/pl022: Fix error message
  spi/rockchip: Mark DMA as optional
  spi/rockchip: Don't warn if SPI is busy but disabled
  spi/rockchip: Fix the wait_for_idle() timeout
  spi: sirf: add fifo reset/start for cmd transfer
  spi: sirf: enable RX_IO_DMA_INT interrupt
  spi: dw: Don't use devm_kzalloc in master->setup callback
  spi: fsl: Don't use devm_kzalloc in master->setup callback

James Drew reports another bug whereby the NFS client is now sending
an OPEN_DOWNGRADE in a situation where it should really have sent a
CLOSE: the client is opening the file for O_RDWR, but then trying to
do a downgrade to O_RDONLY, which is not allowed by the NFSv4 spec.
Reported-by: James Drews <drews@engr.wisc.edu>
Link: http://lkml.kernel.org/r/541AD7E5.8020409@engr.wisc.edu
Fixes: aee7af35 (NFSv4: Fix problems with close in the presence...)
Cc: stable@vger.kernel.org # 2.6.33+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

There is a race between nfs4_state_manager() and
nfs_server_remove_lists() that happens during a nfsv3 mount.

The v3 mount notices there is already a supper block so
nfs_server_remove_lists() called which uses the nfs_client_lock
spin lock to synchronize access to the client list.

At the same time nfs4_state_manager() is running through
the client list looking for work to do, using the same
lock. When nfs4_state_manager() wins the race to the
list, a v3 client pointer is found and not ignored
properly which causes the panic.

Moving some protocol checks before the state checking
avoids the panic.

CC: Stable Tree <stable@vger.kernel.org>
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

This reverts commit b96de000.

This commit is triggering failures to mount by subvolume id in some
configurations.  The main problem is how many different ways this
scanning function is used, both for scanning while mounted and
unmounted.  A proper cleanup is too big for late rcs.

For now, just revert the commit and we'll put a better fix into a later
merge window.
Signed-off-by: Chris Mason <clm@fb.com>

The limited color range knob is in the port registers on
g4x and vlv/chv for HDMI, and on g4x for DP. Add the relevant code
to read out the hardware state into pipe config. On vlv/chv the
DP port limited color range knob is in PIPECONF for which we
already have readout code.

Cc: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

In iscsi_copy_param_list() a failed iscsi_param_list memory allocation
currently invokes iscsi_release_param_list() to cleanup, and will promptly
trigger a NULL pointer dereference.

Instead, go ahead and return for the first iscsi_copy_param_list()
failure case.

Found by coverity.
Signed-off-by: Joern Engel <joern@logfs.org>
Cc: <stable@vger.kernel.org> # v3.1+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch fixes a bug in iscsit_logout_post_handler_diffcid() where
a pointer used as storage for list_for_each_entry() was incorrectly
being used to determine if no matching entry had been found.

This patch changes iscsit_logout_post_handler_diffcid() to key off
bool conn_found to determine if the function needs to exit early.
Reported-by: Joern Engel <joern@logfs.org>
Cc: <stable@vger.kernel.org> # v3.1+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>