The video viu driver is not a vital one for booting purposes.

Remove the unneeded 'default y' option.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

I tried to debug streaming in libcamera, where I stumbled upon this.
I asked around on IRC where I was told that this statement in the
documentation is wrong, so I'm submitting a removal.
Signed-off-by: Dorota Czaplejewicz <dorota.czaplejewicz@puri.sm>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

The typical behavior is to add all controls, then at the end check if
hdl->error was set, and if so, v4l2_ctrl_handler_free is called and
the error is returned.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

For some invalid frames,
especially multiple consecutive invalid frames,
they all can't be decoded,
then the firmware can send picture skipped event
to notify driver that some frames are invalid,
driver can return them with error flag.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

copy the timestamp using the helper function
V4L2_BUF_FLAG_TIMESTAMP_COPY

To implement this, driver will keep the output buffer until it's
encoded, in previous, driver will return the output buffer immediately
after firmware return it
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

copy the timestamp using the helper function
V4L2_BUF_FLAG_TIMESTAMP_COPY

To implement this, driver will keep the output buffer until it's
decoded, in previous, driver will return the output buffer immediately
after copying data to stream buffer.

After that, there is no need to make a workaround for poll function.
driver can use v4l2_m2m_fop_poll directly.
Also, driver don't need to keep a input threshold
as the buffer count is up to only 32.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Fix build errors when RADIO_TEA575X=y, VIDEO_BT848=m, and VIDEO_DEV=m.

The build errors occur due to [in drivers/media/Makefile]:
obj-$(CONFIG_VIDEO_DEV) += radio/
so the (would be) builtin tea575x.o is not being built.

This is also due to drivers/media/radio/Kconfig declaring a bool
Kconfig symbol (RADIO_ADAPTERS) that depends on a tristate (VIDEO_DEV),
so when VIDEO_DEV=m, RADIO_ADAPTERS becomes =y, and then the drivers
that depend on RADIO_ADPATERS can be configured as builtin (=y) or
as loadable modules (=m).

Fix this by converting RADIO_ADAPTERS to a tristate symbol instead
of a bool symbol.

Fixes these build errors:

ERROR: modpost: "snd_tea575x_hw_init" [drivers/media/pci/bt8xx/bttv.ko] undefined!
ERROR: modpost: "snd_tea575x_set_freq" [drivers/media/pci/bt8xx/bttv.ko] undefined!
ERROR: modpost: "snd_tea575x_s_hw_freq_seek" [drivers/media/pci/bt8xx/bttv.ko] undefined!
ERROR: modpost: "snd_tea575x_enum_freq_bands" [drivers/media/pci/bt8xx/bttv.ko] undefined!
ERROR: modpost: "snd_tea575x_g_tuner" [drivers/media/pci/bt8xx/bttv.ko] undefined!

Link: lore.kernel.org/r/202204191711.IKJJFjgU-lkp@intel.com

Fixes: 9958d30f ("media: Kconfig: cleanup VIDEO_DEV dependencies")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Syzbot reported that -1 is used as array index. The problem was in
missing validation check.

hdw->unit_number is initialized with -1 and then if init table walk fails
this value remains unchanged. Since code blindly uses this member for
array indexing adding sanity check is the easiest fix for that.

hdw->workpoll initialization moved upper to prevent warning in
__flush_work.

Reported-and-tested-by: syzbot+1a247e36149ffd709a9b@syzkaller.appspotmail.com

Fixes: d855497e ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Remove a stray blank line between function definition and body.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Describe the coding tree unit as replacement for the macroblock in the
HEVC codec. Highlight a key difference of the HEVC codec to predecessors
like AVC(H.264) to give a better overview of the differences between the
coding standards.

[hverkuil: replaced the 'corresponds to' symbol with the full text for clarity]
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

VP9 support has been added to the driver by commit f25709c4
("media: rkvdec: Add the VP9 backend").
And the VP9 uABI was merged with commit b88dbe38
("media: uapi: Add VP9 stateless decoder controls").

The remaining codec that keeps this driver in staging is HEVC.
Update the TODO list accordingly.
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

VP8 has been added to the uABI by commit 363240ce
("media: uapi: move VP8 stateless controls out of staging")
VP9 has been added to the uABI by commit b88dbe38
("media: uapi: Add VP9 stateless decoder controls")
H264 has been added to the uABI by commit 46a309d2
("media: uapi: move H264 stateless controls out of staging")

The last remaining codec to be added to the uABI is HEVC.
Highlight these changes in the TODO list.
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Fix typos in comments within the Hantro driver.
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

rga->m2m_dev needs to be freed when rga_probe fails.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

To support dynamic resolution change,
driver should meet the following conditions:
1. the previous pictures are all decoded before source change event.
2. prevent decoding new resolution pictures with incorrect capture
   buffer, until user handle source change event and setup capture.
3. report correct fmt and resolution during source change.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Refine code to support dynamic resolution change
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

The GStreamer v4l2videodec only ever calls S_FMT on the output side
and then expects G_FMT on the capture side to return a valid format.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

The decoder will save the precision that was detected from jpeg header
and use it later, when choosing the pixel format and also calculate
bytesperline according to precision.

The 12bit jpeg is not supported yet,
but driver shouldn't led to serious problem if user enqueue a 12 bit jpeg.
And the 12bit jpeg is supported by hardware, driver may support it later.

[hverkuil: document the new precision field]
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Refine code to support dynamic resolution change
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

This patch fixes "space prohibited before that ':'" checkpatch error
in the switch statements.
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Husni Faiz <ahamedhusni73@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

This patch fixes "switch and case should be at the same indent"
checkpatch error.
Signed-off-by: Husni Faiz <ahamedhusni73@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Clang static analysis reports this issue
ispcsiphy.c:63:14: warning: The left operand of '<<'
  is a garbage value
        reg |= mode << shift;
               ~~~~ ^
The iface switch-statement default case falls through
to ISP_INTERFACE_CCP2B_PHY1.  Which is later checked
to set the mode.  Since the default case is left out
of this check mode is never set.  Instead of falling
through and assuming a ISP_INTERFACE_CCP2B_PHY1
iface, return.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

The corresponding API for clk_prepare_enable is clk_disable_unprepare,
other than clk_disable.

Fix this by changing clk_disable to clk_disable_unprepare.

Fixes: b4155d7d ("[media] exynos4-is: Ensure fimc-is clocks are not enabled until properly configured")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

The ceu_data_rz variable is unused when CONFIG_OF isn't set. This
generates a compiler warning. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

We verified that "vpif_obj.sd[i]" is non-NULL on the previous line so
no need to check here.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

The "bdisp->clock" variable cannot be an error pointer here.  No need to
check.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Eliminate the follow versioncheck warning:

./drivers/media/platform/stm/sti/c8sectpfe/c8sectpfe-common.h: 16
linux/version.h not needed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

The RDACM20 camera supports a single image format which is currently
listed as MEDIA_BUS_FMT_UYVY8_2X8. As the video stream is transmitted on
the GMSL serial bus, the 2X8 variant does not apply.

Fix the format by using MEDIA_BUS_FMT_UYVY8_1X16.

This fixes a runtime error which is now triggered as the MAX9286
deserializer implements .link_validate().
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Add a check to make sure the input interface (CSI-2 or parallel) allow
for the requested input bus format. If not inform the user and error out
rather then try to continue with incorrect settings.

While at it add the missing define for RGB666 that is not yet supported
in the driver but we can preemptively check for it in this context
already.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Commit 46fb9995 ("media: platform: place NXP drivers on a separate dir")
moves various files in media/platform into a nxp subdirectory. It adjusts
the section MEDIA DRIVER FOR FREESCALE IMX PXP in MAINTAINERS, but misses
some references in NXP i.MX 8QXP/8QM JPEG V4L2 DRIVER and MEDIA DRIVERS
FOR FREESCALE IMX7.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Adjust the file references in the NXP i.MX 8QXP/8QM JPEG V4L2 DRIVER and
MEDIA DRIVERS FOR FREESCALE IMX7 sections.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

The v4l2_m2m_dev structure documentation incorrectly references the
v4l2_m2m_unregister_media_controller() function when it actually means
v4l2_m2m_register_media_controller(). Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

smb_word_op() has a parameter data_format that
determines if the data is either a byte or
word.  From inspection, smb_word_op() is only
used by the macros smb_wr16() and smb_rd16()
both pass in CMD_WORD_DATA. There is no use of
smb_word_op() that passes in CMD_BYTE_DATA.
So remove the byte handling.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

The subdevice entity function was left unset, which produces a warning
when probing the device:

mxc-md bus@58000000:camera: Entity type for entity rdacm20 19-0051 was
not initialized!

This patch will set entity function to MEDIA_ENT_F_CAM_SENSOR and leave
flags unset.

Fixes: 34009bff ("media: i2c: Add RDACM20 driver")
Fixes: a59f853b ("media: i2c: Add driver for RDACM21 camera module")
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Fix smatch warning in mxc_jpeg_queue_setup, check *nplanes against
current format:

drivers/media/platform/imx-jpeg/mxc-jpeg.c:1070
mxc_jpeg_queue_setup()
         warn: potential user controlled iterator 'i' (array size 2 vs 7)
Signed-off-by: Mirela Rabulea <mirela.rabulea@oss.nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

After sending a patch to Rick Chang, the mediatek mail server responded:

  ** Message not delivered **

  Your message couldn't be delivered to rick.chang@mediatek.com because
  the remote server is misconfigured. See technical details below for more
  information.

  The response from the remote server was:
  550 Relaying mail to rick.chang@mediatek.com is not allowed

So, drop Rick Chang from the MEDIATEK JPEG DRIVER section.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Commit 9cdd70ce ("media: dt-bindings: media: mtk-vcodec: Separate video
encoder and decoder dt-bindings") converts and splits mediatek-vcodec.txt
to mediatek,vcodec-{de,en}coder.yaml, but missed to adjust its reference
in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Repair this file reference in MEDIATEK MEDIA DRIVER.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Commit a16ce2f3 ("media: dt-bindings: mediatek: convert mtk jpeg
decoder/encoder to yaml") converts mediatek-jpeg-decoder.txt to yaml, but
missed to adjust its reference in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

While touching this section, generalize the file entry to also cover the
encoder yaml devicetree, as the driver directory also includes the encoder.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Don't populate the read-only array table on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

Commit ccc30162 ("media: dt: bindings: tegra-vde: Convert to schema")
converts nvidia,tegra-vde.txt to nvidia,tegra-vde.yaml, but missed to
adjust its reference in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Repair this file reference in  MEDIA DRIVERS FOR NVIDIA TEGRA - VDE.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>