* pci/host-exynos:
  PCI: exynos: Fix platform_get_irq() error handling

* pci/host-dra7xx:
  PCI: dra7xx: Fix platform_get_irq() error handling
  PCI: dra7xx: Propagate platform_get_irq() errors in dra7xx_pcie_probe()
  PCI: dra7xx: Use PCI_NUM_INTX

* pci/host-designware:
  PCI: dwc: Clear MSI interrupt status after it is handled, not before
  PCI: qcom: Allow ->post_init() to fail
  PCI: qcom: Don't unroll init if ->init() fails
  PCI: dwc: designware: Handle ->host_init() failures
  PCI: dwc: designware: Test PCIE_ATU_ENABLE bit specifically
  PCI: dwc: designware: Make dw_pcie_prog_*_atu_unroll() static

* pci/host-artpec6:
  PCI: artpec6: Fix platform_get_irq() error handling

* pci/host-armada:
  PCI: armada8k: Fix platform_get_irq() error handling
  PCI: armada8k: Check the return value from clk_prepare_enable()

* pci/host-altera:
  PCI: altera: Fix platform_get_irq() error handling
  PCI: altera: Use size=4 IRQ domain for legacy INTx
  PCI: altera: Remove unused num_of_vectors variable

* pci/host-aardvark:
  PCI: aardvark: Use PCI_NUM_INTX

* pci/irq-intx:
  PCI: Add pci_irqd_intx_xlate()
  PCI: Move enum pci_interrupt_pin to linux/pci.h

platform_get_irq() returns a negative number on failure, so adjust the
logic to detect such condition and propagate the real error value on
failure.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ley Foon Tan <lftan@altera.com>

platform_get_irq() returns a negative number on failure, so adjust the
logic to detect such condition and propagate the real error value on
failure.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Niklas Cassel <niklas.cassel@axis.com>

platform_get_irq() returns a negative number on failure, so adjust the
logic to detect such condition and propagate the real error value on
failure.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

When platform_get_irq() fails we should propagate the real error value
instead of always returning -EINVAL.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>

platform_get_irq() returns a negative number on failure, so adjust the
logic to detect such condition and propagate the real error value on
failure.
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>

If the interrupt status is cleared before it is handled, it is possible
that another interrupt will trigger while servicing the previous one.  This
is causing timeouts in some wireless lan cards which use PCIe.

Clear MSI interrupt status after it gets serviced instead of before calling
generic_handler.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-By: Joao Pinto <jpinto@synopsys.com>

platform_get_irq() returns an error code, but the pci-dra7xx driver ignores
it and always returns -EINVAL. This is not correct and prevents
-EPROBE_DEFER from being propagated properly.

Print and propagate the return value of platform_get_irq() on failure.

This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>

Use the PCI_NUM_INTX macro to indicate the number of PCI INTx interrupts
rather than the magic number 4. This makes it clearer where the number
comes from & what it relates to.
Based-on-similar-patches-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>

The devicetree binding documentation for the Altera PCIe controller shows
an example which uses an interrupt-map property to map PCI INTx interrupts
to hardware IRQ numbers 1-4. The driver creates an IRQ domain with size 5
in order to cover this range, with hwirq=0 left unused.

This patch cleans up this wasted IRQ domain entry, modifying the driver to
use an IRQ domain of size 4 which matches the actual number of PCI INTx
interrupts. Since the hwirq numbers 1-4 are part of the devicetree binding,
and this is considered ABI, we cannot simply change the interrupt-map
property to use the range 0-3. Instead we make use of the
pci_irqd_intx_xlate() helper function to translate the range 1-4 used at
the DT level into the range 0-3 which is now used within the driver, and
stop adding 1 to decoded hwirq numbers in altera_pcie_isr().

Whilst cleaning up INTx handling we make use of the new PCI_NUM_INTX macro
& drop the custom INTX_NUM definition.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ley Foon Tan <lftan@altera.com>

The local variable "num_of_vectors" was unused, so remove it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ley Foon Tan <lftan@altera.com>

Switch from using a custom LEGACY_IRQ_NUM macro to the generic PCI_NUM_INTX
definition for the number of INTx interrupts.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Legacy PCI INTx interrupts are represented in the PCI_INTERRUPT_PIN
register using the range 1-4, which matches our enum pci_interrupt_pin.
This is however not ideal for an IRQ domain, where with 4 interrupts we
would ideally have a domain of size 4 & hwirq numbers in the range 0-3.

Different PCI host controller drivers have handled this in different ways.
Of those under drivers/pci/ which register an INTx IRQ domain, we have:

  - pcie-altera uses the range 1-4 in device trees and an IRQ domain of
    size 5 to cover that range, with entry 0 wasted.

  - pcie-xilinx & pcie-xilinx-nwl use the range 1-4 in device trees but
    register an IRQ domain of size 4, which doesn't cover the hwirq=4/INTD
    case leading to that interrupt being broken.

  - pci-ftpci100 & pci-aardvark use the range 0-3 in both device trees & as
    hwirq numbering in the driver & IRQ domain.

In order to introduce some level of consistency in at least the hwirq
numbering used by the drivers & IRQ domains, this patch introduces a new
pci_irqd_intx_xlate() helper function which drivers using the 1-4 range in
device trees can assign as the xlate callback for their INTx IRQ domain.
This translates the 1-4 range into a 0-3 range, allowing us to use an IRQ
domain of size 4 & avoid a wasted entry. Further patches will make use of
this in drivers to allow them to use an IRQ domain of size 4 for legacy
INTx interrupts without breaking INTD.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

We currently have a definition of enum pci_interrupt_pin in a header
specific to PCI endpoints - linux/pci-epf.h. In order to allow for use of
this enum from PCI host code in a future commit, move its definition to
linux/pci.h & include that from linux/pci-epf.h.

Additionally we add a PCI_NUM_INTX macro which indicates the number of PCI
INTx interrupts, and will be used alongside enum pci_interrupt_pin in
further patches.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
[bhelgaas: move enum pci_interrupt_pin outside #ifdef CONFIG_PCI]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

clk_prepare_enable() may fail, so check its return value and propagate it
in the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

host_init() should detect and propagate errors from post_init().

In addition, by acknowledging that post_init() can fail we must disable the
post_init() resources in a step separate from the deinit, so that we don't
try to disable the post_init() resources a second time.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>

When the init op fails it will restore the state of the resources, so we
should not disable them one more time when this happens.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>

In several dwc-based drivers, ->host_init() can fail, so make sure to
propagate and handle this to avoid continuing operation of a driver or
hardware in an invalid state.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>

The ATU CTRL2 register is 32 bits, and bits other than the enable bit may
be set.  To check whether the ATU is enabled or not, we should test the
enable bit specifically.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>

Helper functions dw_pcie_prog_*_atu_unroll() don't need to be in global
scope, so make them static.

Cleans up sparse warnings:
  - symbol 'dw_pcie_prog_outbound_atu_unroll' was not declared. Should it be static?
  - symbol 'dw_pcie_prog_inbound_atu_unroll' was not declared. Should it be static?
Signed-off-by: Carlos Palminha <palminha@synopsys.com>
[bhelgaas: rewrap to fit in 80 columns]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Joao Pinto <jpinto@synopsys.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>

Pull x86 fixes from Thomas Gleixner:
 "A small set of x86 fixes:

   - prevent the kernel from using the EFI reboot method when EFI is
     disabled.

   - two patches addressing clang issues"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Disable the address-of-packed-member compiler warning
  x86/efi: Fix reboot_mode when EFI runtime services are disabled
  x86/boot: #undef memcpy() et al in string.c

Pull scheduler fixes from Thomas Gleixner:
 "Two patches addressing build warnings caused by inconsistent kernel
  doc comments"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/wait: Clean up some documentation warnings
  sched/core: Fix some documentation build warnings

Pull perf fixes from Thomas Gleixner:
 "A couple of fixes for performance counters and kprobes:

   - a series of small patches which make the uncore performance
     counters on Skylake server systems work correctly

   - add a missing instruction slot release to the failure path of
     kprobes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kprobes/x86: Release insn_slot in failure path
  perf/x86/intel/uncore: Fix missing marker for skx_uncore_cha_extra_regs
  perf/x86/intel/uncore: Fix SKX CHA event extra regs
  perf/x86/intel/uncore: Remove invalid Skylake server CHA filter field
  perf/x86/intel/uncore: Fix Skylake server CHA LLC_LOOKUP event umask
  perf/x86/intel/uncore: Fix Skylake server PCU PMU event format
  perf/x86/intel/uncore: Fix Skylake UPI PMU event masks

Pull irq fix from Thomas Gleixner:
 "Fix for a regression caused by the conversion of x86 to the generic
  hotplug code.

  Instead of doing a plain single line revert, this adds a pile of
  comments so the semantics of the force argument are clear"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/cpuhotplug: Revert "Set force affinity flag on hotplug migration"

Pull DeviceTree fixes from Rob Herring:
 "Two small DT fixes:

   - Fix error handling in of_irq_to_resource_table() due to
     of_irq_to_resource() error return changes.

   - Fix dtx_diff script due to dts include path changes"

* tag 'devicetree-fixes-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: irq: fix of_irq_to_resource() error check
  scripts/dtc: dtx_diff - update include dts paths to match build

Pull NFS client fixes from Anna Schumaker:
 "More NFS client bugfixes for 4.13.

  Most of these fix locking bugs that Ben and Neil noticed, but I also
  have a patch to fix one more access bug that was reported after last
  week.

  Stable fixes:
   - Fix a race where CB_NOTIFY_LOCK fails to wake a waiter
   - Invalidate file size when taking a lock to prevent corruption

  Other fixes:
   - Don't excessively generate tiny writes with fallocate
   - Use the raw NFS access mask in nfs4_opendata_access()"

* tag 'nfs-for-4.13-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4.1: Fix a race where CB_NOTIFY_LOCK fails to wake a waiter
  NFS: Optimize fallocate by refreshing mapping when needed.
  NFS: invalidate file size when taking a lock.
  NFS: Use raw NFS access mask in nfs4_opendata_access()

Pull xfs fixes from Darrick Wong:

 - fix firstfsb variables that we left uninitialized, which could lead
   to locking problems.

 - check for NULL metadata buffer pointers before using them.

 - don't allow btree cursor manipulation if the btree block is corrupt.
   Better to just shut down.

 - fix infinite loop problems in quotacheck.

 - fix buffer overrun when validating directory blocks.

 - fix deadlock problem in bunmapi.

* tag 'xfs-4.13-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix multi-AG deadlock in xfs_bunmapi
  xfs: check that dir block entries don't off the end of the buffer
  xfs: fix quotacheck dquot id overflow infinite loop
  xfs: check _alloc_read_agf buffer pointer before using
  xfs: set firstfsb to NULLFSBLOCK before feeding it to _bmapi_write
  xfs: check _btree_check_block value

Pull KVM fixes from Paolo Bonzini:
 "s390:
   - SRCU fix

  PPC:
   - host crash fixes

  x86:
   - bugfixes, including making nested posted interrupts really work

  Generic:
   - tweaks to kvm_stat and to uevents"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: LAPIC: Fix reentrancy issues with preempt notifiers
  tools/kvm_stat: add '-f help' to get the available event list
  tools/kvm_stat: use variables instead of hard paths in help output
  KVM: nVMX: Fix loss of L2's NMI blocking state
  KVM: nVMX: Fix posted intr delivery when vcpu is in guest mode
  x86: irq: Define a global vector for nested posted interrupts
  KVM: x86: do mask out upper bits of PAE CR3
  KVM: make pid available for uevents without debugfs
  KVM: s390: take srcu lock when getting/setting storage keys
  KVM: VMX: remove unused field
  KVM: PPC: Book3S HV: Fix host crash on changing HPT size
  KVM: PPC: Book3S HV: Enable TM before accessing TM registers

Pull xen fixes from Juergen Gross:
 "Three minor cleanups for xen related drivers"

* tag 'for-linus-4.13b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: dont fiddle with event channel masking in suspend/resume
  xen: selfballoon: remove unnecessary static in frontswap_selfshrink()
  xen: Drop un-informative message during boot

Pull arm64 fixes from Will Deacon:
 "I'd been collecting these whilst we debugged a CPU hotplug failure,
  but we ended up diagnosing that one to tglx, who has taken a fix via
  the -tip tree separately.

  We're seeing some NFS issues that we haven't gotten to the bottom of
  yet, and we've uncovered some issues with our backtracing too so there
  might be another fixes pull before we're done.

  Summary:

   - Ensure we have a guard page after the kernel image in vmalloc

   - Fix incorrect prefetch stride in copy_page

   - Ensure irqs are disabled in die()

   - Fix for event group validation in QCOM L2 PMU driver

   - Fix requesting of PMU IRQs on AMD Seattle

   - Minor cleanups and fixes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mmu: Place guard page after mapping of kernel image
  drivers/perf: arm_pmu: Request PMU SPIs with IRQF_PER_CPU
  arm64: sysreg: Fix unprotected macro argmuent in write_sysreg
  perf: qcom_l2: fix column exclusion check
  arm64/lib: copy_page: use consistent prefetch stride
  arm64/numa: Drop duplicate message
  perf: Convert to using %pOF instead of full_name
  arm64: Convert to using %pOF instead of full_name
  arm64: traps: disable irq in die()
  arm64: atomics: Remove '&' from '+&' asm constraint in lse atomics
  arm64: uaccess: Remove redundant __force from addr cast in __range_ok

Pull powerpc fixes from Michael Ellerman:
 "The highlight is Ben's patch to work around a host killing bug when
  running KVM guests with the Radix MMU on Power9. See the long change
  log of that commit for more detail.

  And then three fairly minor fixes:

   - fix of_node_put() underflow during reconfig remove, using old DLPAR
     tools.

   - fix recently introduced ld version check with 64-bit LE-only
     toolchain.

   - free the subpage_prot_table correctly, avoiding a memory leak.

  Thanks to: Aneesh Kumar K.V, Benjamin Herrenschmidt, Laurent Vivier"

* tag 'powerpc-4.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm/hash: Free the subpage_prot_table correctly
  powerpc/Makefile: Fix ld version check with 64-bit LE-only toolchain
  powerpc/pseries: Fix of_node_put() underflow during reconfig remove
  powerpc/mm/radix: Workaround prefetch issue with KVM

nfs4_retry_setlk() sets the task's state to TASK_INTERRUPTIBLE within the
same region protected by the wait_queue's lock after checking for a
notification from CB_NOTIFY_LOCK callback.  However, after releasing that
lock, a wakeup for that task may race in before the call to
freezable_schedule_timeout_interruptible() and set TASK_WAKING, then
freezable_schedule_timeout_interruptible() will set the state back to
TASK_INTERRUPTIBLE before the task will sleep.  The result is that the task
will sleep for the entire duration of the timeout.

Since we've already set TASK_INTERRUPTIBLE in the locked section, just use
freezable_schedule_timout() instead.

Fixes: a1d617d8 ("nfs: allow blocking locks to be awoken by lock callbacks")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>