- 11 Nov, 2017 1 commit
-
-
LiFan authored
In flush_nat_entries, all dirty nats will be flushed and if their new address isn't NULL_ADDR, their bitmaps will be updated, the free_nid_count of the bitmaps will be increaced regardless of whether the nats have already been occupied before. This could lead to wrong free_nid_count. So this patch checks the status of the bits beforeactually set/clear them. Fixes: 586d1492 ("f2fs: skip scanning free nid bitmap of full NAT blocks") Signed-off-by:
Fan li <fanofcode.li@samsung.com> Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org>
-
- 10 Nov, 2017 1 commit
-
-
Chao Yu authored
We will keep __add_ino_entry success all the time, for ENOMEM failure case, we have already handled it by using __GFP_NOFAIL flag, so we don't have to use additional opened loop codes here, remove them. Signed-off-by:
-
- 09 Nov, 2017 4 commits
-
-
Hyunchul Lee authored
Write hints helps F2FS to determine which type of segments would be selected for buffered write. This patch implements the mapping from write hints to segment types as shown below. hints segment type ----- ------------ WRITE_LIFE_SHORT CURSEG_HOT_DATA WRITE_LIFE_EXTREME CURSEG_COLD_DATA others CURSEG_WARM_DATA the F2FS poliy for hot/cold seperation has precedence over this hints. And hints are not applied in in-place update. Signed-off-by:
Hyunchul Lee <cheol.lee@lge.com> Reviewed-by:
-
Chao Yu authored
Commit 4ac91242 ("f2fs: introduce free nid bitmap") copied codes from __build_free_nids() into scan_free_nid_bits(), they are redundant, introduce one common function scan_curseg_cache for cleanup. Signed-off-by:
-
Fan Li authored
We call scan_free_nid_bits only when there isn't many free nids left, it means that marked bits in free_nid_bitmap are supposed to be few, use find_next_bit_le is more efficient in such case. According to my tests, use find_next_bit_le instead of test_bit_le will cut down the traversal time to one third of its original. Signed-off-by:
-
Fan Li authored
In current version, after scan_free_nid_bits, the scan is over if nid_cnt[FREE_NID] != 0. In most cases, there are still free nids in the free list during the scan, and scan_free_nid_bits usually can't increase nid_cnt[FREE_NID]. It causes that __build_free_nids is called many times without solving the shortage of the free nids. This patch fixes that. Signed-off-by:
-
- 07 Nov, 2017 2 commits
-
-
Chao Yu authored
This patch slightly changes need_do_checkpoint to return the detail info that indicates why we need do checkpoint, then caller could print it with trace message. Signed-off-by:
-
Chao Yu authored
Without FADVISE_KEEP_SIZE_BIT, we will try to recover file size according to last non-hole block, so in fallocate(), we must set FADVISE_KEEP_SIZE_BIT flag once we have preallocated block cross EOF, instead of when all preallocation is success. Otherwise, file size will be incorrect due to lack of this flag. Simple testcase to reproduce this: 1. echo 2 > /sys/fs/f2fs/<device>/inject_type 2. echo 10 > /sys/fs/f2fs/<device>/inject_rate 3. run tests/generic/392 4. disable fault injection 5. do remount Signed-off-by:
-
- 06 Nov, 2017 26 commits
-
-
Chao Yu authored
During block exchange in {insert,collapse,move}_range, page-block mapping is unstable due to mapping moving or recovery, so there should be no concurrent cache read operation rely on such mapping, nor cache write operation to mess up block exchange. So this patch let background GC be aware of that. Signed-off-by: -
Fan Li authored
Use a slightly easier way to calculate last_nid. Signed-off-by:
-
Chao Yu authored
Sometimes, after running generic/270 of fstest, fsck reports summary info and actual position of block address in direct node becoming inconsistent. The root cause is race in between __f2fs_replace_block and change_curseg as below: Thread A Thread B - __clone_blkaddrs - f2fs_replace_block - __f2fs_replace_block - segnoA = GET_SEGNO(sbi, blkaddrA); - type = se->type:=CURSEG_HOT_DATA - if (!IS_CURSEG(sbi, segnoA)) type = CURSEG_WARM_DATA - allocate_data_block - allocate_segment - get_ssr_segment - change_curseg(segnoA, CURSEG_HOT_DATA) - change_curseg(segnoA, CURSEG_WARM_DATA) - reset_curseg - __set_sit_entry_type - change se->type from CURSEG_HOT_DATA to CURSEG_WARM_DATA So finally, hot curseg locates in segnoA, but type of segnoA becomes CURSEG_WARM_DATA. Then if we invoke __f2fs_replace_block(blkaddrB, blkaddrA, true, false), as blkaddrA locates in segnoA, so we will move warm type curseg to segnoA, then change its summary cache and writeback it to summary block. But segnoA is used by hot type curseg too, once it moves or persist, it will cover summary block content with inner old summary cache, result in inconsistent status. This patch tries to fix this issue by introduce global curseg lock to avoid race in between __f2fs_replace_block and change_curseg. Signed-off-by: -
Chao Yu authored
After commit a468f0ef ("f2fs: use crc and cp version to determine roll-forward recovery"), last caller of update_meta_page passing @src with NULL is gone, so remove related dead code there. Signed-off-by:
-
Chao Yu authored
Signed-off-by:
-
Jeff Layton authored
f2fs does not set the SB_I_VERSION flag, so the i_version will never be incremented on write. It was recently changed to increment the i_version on a quota write, which isn't necessary here. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Reviewed-by:
-
Chao Yu authored
When we are closing to trigger foreground GC, if there are only a few of dirty metas, we can log these dirty metas in left space of opened segments instead of triggering foreground GC. With this patch, total count of foreground GC triggered by test/generic/* of fstest suit reduce from 254 to 184. So let's do the check before foreground GC anyway. Signed-off-by:
-
Chao Yu authored
There are some cases user didn't update SIT cache under this lock, so let's use rw_semaphore instead of mutex to enhance concurrently accessing. Signed-off-by:
-
Jaegeuk Kim authored
This patch supports hidden quota files in the system, which will be used for Android. It requires up-to-date f2fs-tools later than v1.9.0. Reviewed-by:
-
Jaegeuk Kim authored
This patch adds quota_ino feature infra to be used for quota files. Reviewed-by:
-
Fan Li authored
Make three modification for __update_nat_bits: 1. Take the codes of dealing the nat with nid 0 out of the loop Such nat only needs to be dealt with once at beginning. 2. Use " nat_index == 0" instead of " start_nid == 0" to decide if it's the first nat block It's better that we don't assume @start_nid is the first nid of the nat block it's in. 3. Use " if (nat_blk->entries[i].block_addr != NULL_ADDR)" to explicitly comfirm the value of block_addr use constant to make sure the codes is right, even if the value of NULL_ADDR changes. Signed-off-by: -
Yunlei He authored
modify for accurate fggc node io stat Signed-off-by:
Yunlei He <heyunlei@huawei.com> Reviewed-by:
-
Yunlong Song authored
This reverts commit 5e443818 The commit should be reverted because call sequence of below two parts of code must be kept: a. update sit information, it needs to be updated before segment allocation since latter allocation may trigger SSR, and SSR allocation needs latest valid block information of all segments. b. update segment status, it needs to be updated after segment allocation since we can skip updating current opened segment status. Fixes: 5e443818 ("f2fs: handle dirty segments inside refresh_sit_entry") Suggested-by:
Yunlong Song <yunlong.song@huawei.com> Reviewed-by:
-
Fan Li authored
This patch add a new function to move nid from one state to another. Move operation is heavily used, by adding a new function for it we can cut down some branches from several flow. Signed-off-by:
-
Chao Yu authored
This patch exports min_ssr_segments threshold in sysfs to let user control triggering SSR allocation flexibly. Signed-off-by:
-
Chao Yu authored
We have supported to issue discard in specified range during fstrim, it needs to return caller with successfully trimmed bytes in that range instead of bytes of invalid blocks which are scanned in checkpoint. Signed-off-by:
-
Chao Yu authored
This patch adds to support bio allocation error injection to simulate out-of-memory test scenario. Signed-off-by:
-
Chao Yu authored
This patch adds to support get_page error injection to simulate out-of-memory test scenario. Signed-off-by:
-
Chao Yu authored
There are some missing sysfs entries' description in document, add them. Signed-off-by:
-
Yunlong Song authored
It supports to extend reserved_blocks sysfs interface to be soft threshold, which allows user configure it exceeding current available user space. This patch also introduces a new sysfs interface called current_reserved_blocks, which shows the current blocks that have already been reserved. Signed-off-by:
-
Jaegeuk Kim authored
This patch fixes recovering incomplete xattr entries remaining in inline xattr and xattr block, caused by any kind of errors. Reviewed-by:
-
Chao Yu authored
Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by:
Sheng Yong <shengyong1@huawei.com> Signed-off-by:
-
Jaegeuk Kim authored
This patch shows whether checkpoint met any error case. Signed-off-by: -
Jaegeuk Kim authored
This patch adds to call quota_intialize in f2fs_set_acl, f2fs_unlink, and f2fs_rename. Reviewed-by:
-
Jaegeuk Kim authored
This patch adds one sysfs entry to show # of dirty segments which can be used for gc timing by user. Reviewed-by:
-
Jaegeuk Kim authored
This patch replaces to use cp_error flag instead of RDONLY for quota off. Reviewed-by:
-
- 26 Oct, 2017 6 commits
-
-
Colin Ian King authored
There are several assignments to variables that are redundant as the values are never read when the variables are updated later and so the redundant statements can be safely removed. Cleans up clang warnings: fs/f2fs/segment.c:923:19: warning: Value stored to 'p' during its initialization is never read fs/f2fs/segment.c:2060:2: warning: Value stored to 'hint' is never read fs/f2fs/segment.c:2353:2: warning: Value stored to 'start_block' is never read fs/f2fs/segment.c:2354:2: warning: Value stored to 'end_block' is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Arnd Bergmann authored
All uses of timespec are deprecated, and this one is not particularly useful, as the documented method for converting seconds to jiffies is to multiply by 'HZ'. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Chao Yu authored
There may be extreme case as below: For one section contains one segment, and there are total 100 segments with 10% over-privision ratio in f2fs partition, fggc_threshold will be rounded down to 460 instead of 460.8 as below caclulation: sbi->fggc_threshold = div_u64((u64)(main_count - ovp_count) * BLKS_PER_SEC(sbi), (main_count - resv_count)); If section usage is as: 60 segments which contain 460 valid blocks 40 segments which contain 462 valid blocks As valid block number in all sections is large than fggc_threshold, so none of them will be chosen as candidate due to incorrect fggc_threshold. Let's just soften the term of choosing foreground GC candidates. Signed-off-by:
-
Jaegeuk Kim authored
This reverts commit 4f31d26b. It turns out that we need to report error number if nothing was written. Reviewed-by:
-
Jaegeuk Kim authored
This patch removes obosolete parameter for truncate_xattr_node. Suggested-by:
-
Jaegeuk Kim authored
This gives another chance to read or write quota data. Reviewed-by:
-
