- 02 Jan, 2019 12 commits
-
-
Chuck Lever authored
Having to specify "proto=rdma,port=20049" is cumbersome. RFC 8267 Section 6.3 requires NFSv4 clients to use "the alternative well-known port number", which is 20049. Make the use of the well- known port number automatic, just as it is for NFS/TCP and port 2049. For NFSv2/3, Section 4.2 allows clients to simply choose 20049 as the default or use rpcbind. I don't know of an NFS/RDMA server implementation that registers it's NFS/RDMA service with rpcbind, so automatically choosing 20049 seems like the better choice. The other widely-deployed NFS/RDMA client, Solaris, also uses 20049 as the default port. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com>
-
Chuck Lever authored
Place the associated RPC transaction's XID in the upper 32 bits of each RDMA segment's rdma_offset field. There are two reasons to do this: - The R_key only has 8 bits that are different from registration to registration. The XID adds more uniqueness to each RDMA segment to reduce the likelihood of a software bug on the server reading from or writing into memory it's not supposed to. - On-the-wire RDMA Read and Write requests do not otherwise carry any identifier that matches them up to an RPC. The XID in the upper 32 bits will act as an eye-catcher in network captures. Suggested-by:
Tom Talpey <ttalpey@microsoft.com> Signed-off-by:
-
Chuck Lever authored
Clean up: Now that there is only FRWR, there is no need for a memory registration switch. The indirect calls to the memreg operations can be replaced with faster direct calls. Signed-off-by:
-
Chuck Lever authored
FMR is not supported on most recent RDMA devices. It is also less secure than FRWR because an FMR memory registration can expose adjacent bytes to remote reading or writing. As discussed during the RDMA BoF at LPC 2018, it is time to remove support for FMR in the NFS/RDMA client stack. Note that NFS/RDMA server-side uses either local memory registration or FRWR. FMR is not used. There are a few Infiniband/RoCE devices in the kernel tree that do not appear to support MEM_MGT_EXTENSIONS (FRWR), and therefore will not support client-side NFS/RDMA after this patch. These are: - mthca - qib - hns (RoCE) Users of these devices can use NFS/TCP on IPoIB instead. Signed-off-by:
-
Chuck Lever authored
Some devices advertise a large max_fast_reg_page_list_len capability, but perform optimally when MRs are significantly smaller than that depth -- probably when the MR itself is no larger than a page. By default, the RDMA R/W core API uses max_sge_rd as the maximum page depth for MRs. For some devices, the value of max_sge_rd is 1, which is also not optimal. Thus, when max_sge_rd is larger than 1, use that value. Otherwise use the value of the max_fast_reg_page_list_len attribute. I've tested this with CX-3 Pro, FastLinq, and CX-5 devices. It reproducibly improves the throughput of large I/Os by several percent. Signed-off-by:
-
Chuck Lever authored
With certain combinations of krb5i/p, MR size, and r/wsize, I/O can fail with EMSGSIZE. This is because the calculated value of ri_max_segs (the max number of MRs per RPC) exceeded RPCRDMA_MAX_HDR_SEGS, which caused Read or Write list encoding to walk off the end of the transport header. Once that was addressed, the ro_maxpages result has to be corrected to account for the number of MRs needed for Reply chunks, which is 2 MRs smaller than a normal Read or Write chunk. Signed-off-by:
-
Chuck Lever authored
Transport disconnect processing does a "wake pending tasks" at various points. Suppose an RPC Reply is being processed. The RPC task that Reply goes with is waiting on the pending queue. If a disconnect wake-up happens before reply processing is done, that reply, even if it is good, is thrown away, and the RPC has to be sent again. This window apparently does not exist for socket transports because there is a lock held while a reply is being received which prevents the wake-up call until after reply processing is done. To resolve this, all RPC replies being processed on an RPC-over-RDMA transport have to complete before pending tasks are awoken due to a transport disconnect. Callers that already hold the transport write lock may invoke ->ops->close directly. Others use a generic helper that schedules a close when the write lock can be taken safely. Signed-off-by:
-
Chuck Lever authored
After thinking about this more, and auditing other kernel ULP imple- mentations, I believe that a DISCONNECT cm_event will occur after a fatal QP event. If that's the case, there's no need for an explicit disconnect in the QP event handler. Signed-off-by:
-
Chuck Lever authored
To address a connection-close ordering problem, we need the ability to drain the RPC completions running on rpcrdma_receive_wq for just one transport. Give each transport its own RPC completion workqueue, and drain that workqueue when disconnecting the transport. Signed-off-by:
-
Chuck Lever authored
Clean up: Divide the work cleanly: - rpcrdma_wc_receive is responsible only for RDMA Receives - rpcrdma_reply_handler is responsible only for RPC Replies - the posted send and receive counts both belong in rpcrdma_ep Signed-off-by:
-
Chuck Lever authored
The recovery case in frwr_op_unmap_sync needs to DMA unmap each MR. frwr_release_mr does not DMA-unmap, but the recycle worker does. Fixes: 61da886b ("xprtrdma: Explicitly resetting MRs is ... ") Signed-off-by:
-
Chuck Lever authored
While chasing yet another set of DMAR fault reports, I noticed that the frwr recycler conflates whether or not an MR has been DMA unmapped with frwr->fr_state. Actually the two have only an indirect relationship. It's in fact impossible to guess reliably whether the MR has been DMA unmapped based on its fr_state field, especially as the surrounding code and its assumptions have changed over time. A better approach is to track the DMA mapping status explicitly so that the recycler is less brittle to unexpected situations, and attempts to DMA-unmap a second time are prevented. Signed-off-by:
-
- 21 Dec, 2018 1 commit
-
-
Chris Perl authored
This patch removes the check from nfs_compare_mount_options to see if a `sec' option was passed for the current mount before comparing auth flavors and instead just always compares auth flavors. Consider the following scenario: You have a server with the address 192.168.1.1 and two exports /export/a and /export/b. The first export supports `sys' and `krb5' security, the second just `sys'. Assume you start with no mounts from the server. The following results in EIOs being returned as the kernel nfs client incorrectly thinks it can share the underlying `struct nfs_server's: $ mkdir /tmp/{a,b} $ sudo mount -t nfs -o vers=3,sec=krb5 192.168.1.1:/export/a /tmp/a $ sudo mount -t nfs -o vers=3 192.168.1.1:/export/b /tmp/b $ df >/dev/null df: ‘/tmp/b’: Input/output error Signed-off-by:Chris Perl <cperl@janestreet.com> Signed-off-by:
-
- 19 Dec, 2018 26 commits
-
-
NeilBrown authored
Just use ->cr_cred->fsuid directly. Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
NeilBrown authored
1/ discard 'struct unx_cred'. We don't need any data that is not already in 'struct rpc_cred'. 2/ Don't keep these creds in a hash table. When a credential is needed, simply allocate it. When not needed, discard it. This can easily be faster than performing a lookup on a shared hash table. As the lookup can happen during write-out, use a mempool to ensure forward progress. This means that we cannot compare two credentials for equality by comparing the pointers, but we never do that anyway. Signed-off-by:
-
NeilBrown authored
This now always just does get_rpccred(), so we don't need an operation pointer to know to do that. Signed-off-by:
-
NeilBrown authored
This is no longer used. Signed-off-by:
-
NeilBrown authored
SUNRPC has two sorts of credentials, both of which appear as "struct rpc_cred". There are "generic credentials" which are supplied by clients such as NFS and passed in 'struct rpc_message' to indicate which user should be used to authorize the request, and there are low-level credentials such as AUTH_NULL, AUTH_UNIX, AUTH_GSS which describe the credential to be sent over the wires. This patch replaces all the generic credentials by 'struct cred' pointers - the credential structure used throughout Linux. For machine credentials, there is a special 'struct cred *' pointer which is statically allocated and recognized where needed as having a special meaning. A look-up of a low-level cred will map this to a machine credential. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
NeilBrown authored
Use the common 'struct cred' to pass credentials for readdir. Signed-off-by:
-
NeilBrown authored
Rather than keying the access cache with 'struct rpc_cred', use 'struct cred'. Then use cred_fscmp() to compare credentials rather than comparing the raw pointer. A benefit of this approach is that in the common case we avoid the rpc_lookup_cred_nonblock() call which can be slow when the cred cache is large. This also keeps many fewer items pinned in the rpc cred cache, so the cred cache is less likely to get large. Signed-off-by:
-
NeilBrown authored
This is no longer used. Signed-off-by:
-
NeilBrown authored
NFS needs to know when a credential is about to expire so that it can modify write-back behaviour to finish the write inside the expiry time. It currently uses functions in SUNRPC code which make use of a fairly complex callback scheme and flags in the generic credientials. As I am working to discard the generic credentials, this has to change. This patch moves the logic into NFS, in part by finding and caching the low-level credential in the open_context. We then make direct cred-api calls on that. This makes the code much simpler and removes a dependency on generic rpc credentials. Signed-off-by:
-
NeilBrown authored
The credential passed in rpc_message.rpc_cred is always a generic credential except in one instance. When gss_destroying_context() calls rpc_call_null(), it passes a specific credential that it needs to destroy. In this case the RPC acts *on* the credential rather than being authorized by it. This special case deserves explicit support and providing that will mean that rpc_message.rpc_cred is *always* generic, allowing some optimizations. So add "tk_op_cred" to rpc_task and "rpc_op_cred" to the setup data. Use this to pass the cred down from rpc_call_null(), and have rpcauth_bindcred() notice it and bind it in place. Credit to kernel test robot <fengguang.wu@intel.com> for finding a bug in earlier version of this patch. Signed-off-by:
-
NeilBrown authored
In almost all cases the credential stored in rpc_message.rpc_cred is a "generic" credential. One of the two expections is when an AUTH_NULL credential is used such as for RPC ping requests. To improve consistency, don't pass an explicit credential in these cases, but instead pass NULL and set a task flag, similar to RPC_TASK_ROOTCREDS, which requests that NULL credentials be used by default. Signed-off-by:
-
NeilBrown authored
When NFS creates a machine credential, it is a "generic" credential, not tied to any auth protocol, and is really just a container for the princpal name. This doesn't get linked to a genuine credential until rpcauth_bindcred() is called. The lookup always succeeds, so various places that test if the machine credential is NULL, are pointless. As a step towards getting rid of generic credentials, this patch gets rid of generic machine credentials. The nfs_client and rpc_client just hold a pointer to a constant principal name. When a machine credential is wanted, a special static 'struct rpc_cred' pointer is used. rpcauth_bindcred() recognizes this, finds the principal from the client, and binds the correct credential. Signed-off-by:
-
NeilBrown authored
it is never used. Signed-off-by:
-
NeilBrown authored
This lock is no longer necessary. If nfs4_get_renew_cred() needs to hunt through the open-state creds for a user cred, it still takes the lock to stablize the rbtree, but otherwise there are no races. Note that this completely removes the lock from nfs4_renew_state(). It appears that the original need for the locking here was removed long ago, and there is no longer anything to protect. Signed-off-by:
-
NeilBrown authored
NFSv4 state management tries a root credential when no machine credential is available, as can happen with kerberos. It does this by replacing the cl_machine_cred with a root credential. This means that any user of the machine credential needs to take a lock while getting a reference to the machine credential, which is a little cumbersome. So introduce an explicit cl_root_cred, and never free either credential until client shutdown. This means that no locking is needed to reference these credentials. Future patches will make use of this. This is only a temporary addition. both cl_machine_cred and cl_root_cred will disappear later in the series. Signed-off-by:
-
NeilBrown authored
The cred is a machine_cred iff ->principal is set, so there is no need for the extra flag. There is one case which deserves some explanation. nfs4_root_machine_cred() calls rpc_lookup_machine_cred() with a NULL principal name which results in not getting a machine credential, but getting a root credential instead. This appears to be what is expected of the caller, and is clearly the result provided by both auth_unix and auth_gss which already ignore the flag. Signed-off-by:
-
NeilBrown authored
Use cred->fsuid and cred->fsgid instead. Signed-off-by:
-
NeilBrown authored
We can use cred->groupinfo (from the 'struct cred') instead. Signed-off-by:
-
NeilBrown authored
The SUNRPC credential framework was put together before Linux has 'struct cred'. Now that we have it, it makes sense to use it. This first step just includes a suitable 'struct cred *' pointer in every 'struct auth_cred' and almost every 'struct rpc_cred'. The rpc_cred used for auth_null has a NULL 'struct cred *' as nothing else really makes sense. For rpc_cred, the pointer is reference counted. For auth_cred it isn't. struct auth_cred are either allocated on the stack, in which case the thread owns a reference to the auth, or are part of 'struct generic_cred' in which case gc_base owns the reference, and "acred" shares it. Signed-off-by:
-
NeilBrown authored
It is common practice for helpers like this to silently, accept a NULL pointer. get_rpccred() and put_rpccred() used by NFS act this way and using the same interface will ease the conversion for NFS, and simplify the resulting code. Signed-off-by:
-
NeilBrown authored
There is no reason that modules should not be able to use this, and NFS will need it when converted to use 'struct cred'. Signed-off-by:
-
NeilBrown authored
Sometimes we want to opportunistically get a ref to a cred in an rcu_read_lock protected section. get_task_cred() does this, and NFS does as similar thing with its own credential structures. To prepare for NFS converting to use 'struct cred' more uniformly, define get_cred_rcu(), and use it in get_task_cred(). Signed-off-by:
-
NeilBrown authored
NFS needs to compare to credentials, to see if they can be treated the same w.r.t. filesystem access. Sometimes an ordering is needed when credentials are used as a key to an rbtree. NFS currently has its own private credential management from before 'struct cred' existed. To move it over to more consistent use of 'struct cred' we need a comparison function. This patch adds that function. Signed-off-by:
-
Ben Dooks authored
If we want /proc/sys/sunrpc the current kernel also drags in other debug features which we don't really want. Instead, we should always show the following entries: /proc/sys/sunrpc/udp_slot_table_entries /proc/sys/sunrpc/tcp_slot_table_entries /proc/sys/sunrpc/tcp_max_slot_table_entries /proc/sys/sunrpc/min_resvport /proc/sys/sunrpc/max_resvport /proc/sys/sunrpc/tcp_fin_timeout Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by:
Thomas Preston <thomas.preston@codethink.co.uk> Signed-off-by:
-
Pavel Tikhomirov authored
Please see comment to filelayout_pg_test for reference. To: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Anna Schumaker <anna.schumaker@netapp.com> Cc: linux-nfs@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by:
-
Olga Kornievskaia authored
commit e8f25e6d "NFS: Remove the NFS v4 xdev mount function" removed the last use of this. Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Signed-off-by:
-
- 18 Dec, 2018 1 commit
-
-
Trond Myklebust authored
Over the years, xprt_connect_status() has been superseded by call_connect_status(), which now handles all the errors that xprt_connect_status() does and more. Since the latter converts all errors that it doesn't recognise to EIO, then it is time for it to be retired. Reported-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Tested-by:
-
