Patch Bjorn Helgaas: Fix the "timer tick before it's due" complaint
from timer_interrupt().  The problem was that smp_callin() turned
on the periodic timer tick before syncing the ITC with the BP.

Syncing the ITC happens with interrupts disabled, and if you're
unlucky enough to (1) pend a timer interrupt, and (2) set the ITC
back before the ITM value that caused the timer interrupt, you
can get stuck for several iterations in the following cycle
(assume 100 clocks per tick):

    ITC     ITM
    ---	    ---
                    ia64_init_itm()
    100	    200	        schedule first tick at 200
                    ia64_sync_itc()
                        disable interrupts
    200     200         ITC == ITM; pend IT interrupt
    150                 set ITC to sync with BP
                        enable interrupts
                        recognize pending IT interrupt
                        disable IT interrupts
                    timer_interrupt()
    160     200         notice that 160 < 200,
                            printk "timer tick before it's due")
    200     200         ITC == ITM; pend IT interrupt
	    300         set ITM for next tick
                        re-enable IT interrupt
                        recognize pending IT interrupt
                        disable IT interrupts
                    timer_interrupt()
    260     300         notice that 260 < 300,
                            printk "timer tick before it's due")

    ...	            repeat until you're tired or timer_interrupt()
                    takes long enough that the ITC lands after the
                    ITM

This patch syncs the ITC with the BP before starting up the
periodic tick, so the above scenario should never happen.

This doesn't change how the timer tick on the BP is started;
that happens quite early (and must be early because things
like calibrate_delay() depend on jiffies updates).

Switches /proc/perfmon to using the seq_file interface.  This is more
inline with the rest of the kernel and avoid crashes for very large
machine configurations.

Based on patch by Dean Nelson.

By default, the sn2 PCI init code doesn't map option ROM address
ranges since PIO address space is limited.  However, we do need to map
display option ROMs in the event that userland applications want to
read and emulate them.

A couple of unused variable warnings cropped up in the sn2 pci init routine.
This patch kills the unused variables.

sn_get_node_first_cpu() is redundant, so kill it.  Since calls to this routine 
happen rather late in the boot process, using the generic topology functions 
is safe.  Fixup the callers and kill the function.

Add ia64_dv_serialize_*() macros to ia64_set_*br() calls to avoid DV warnings
from the assembler (requires updated assembler).

Based on patch by Keith Owens.

into tiger.hpl.hp.com:/data1/bk/lia64/to-linus-2.5

This should help some laptops where the generic PCI
code might otherwise believe that this range is unused.
The ACPI IO range is usually not visible as a standard
BAR.

Various people hit this in earlier kernels. The x86-64 kernel did not compile 
without CONFIG_IOMMU_GART in various configurations. Just add the missing symbol 
and export it. Also export iommu_merge while I am at it.

This fixes a bug in the new machine check handler on x86-64.

One nasty part was that when you got an MCE during boot up
then it would not always print it on the screen, but still
panic because it attempted to kill the idle task.

This patch does:
 - Always use KERN_EMERG when printing MCEs
 - Always panic and print on screen before killing idle loop
   or init.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into flint.arm.linux.org.uk:/usr/src/bk/linux-2.6-rmk

Patch from Marc Singer

Documentation for the Sharp-LH machines.

Patch from Marc Singer

Include files for this updated lh7a40x patch set.  The changes in this
set from the previous are mostly cosmetic.  The memory macros were
reworked in order to be more similar to the other ARM versions.  The
previous versions produced the same results, but the forms are
slightly different.

Patch from Marc Singer

Updated change set for the 2.6.5 kernel *and* for the April 8th arm
patch.  Also included are changes suggested by Russell that merge
several of the files in the mach- directory.  I have also endeavored
to remove all unnecessary whitespace additions.

Note that since I've found the cause of an annoying user-space crash,
I believe that this patch is OK.  The crash appears to have nothing to
do with the system setup.

Patch from Tony Lindgren

This patch syncs the mainline kernel with the linux-omap tree. The
patch contains following updates:
- Move virtual IO area to 0xfefb0000 from 0xfffb0000 to fix parts of
  IO area  overlapping with ARM Linux reserved memory area
- Add support to OMAP-730, OMAP-5912, and OMAP-1710 processors
- Reorganize board support
- Add OMAP core detection
This patch requires ARM Linux patch 1844/1 be applied to compile
OMAP-730 and OMAP-5912

Patch from Tony Lindgren

This patch syncs the mainline kernel with the linux-omap tree. The
patch contains following updates:
- Move virtual IO area to 0xfefb0000 from 0xfffb0000 to fix parts of
  IO area overlapping with ARM Linux reserved memory area
- Add support to OMAP-730, OMAP-5912, and OMAP-1710 processors
- Reorganize board support
- Add OMAP core detection
This patch requires ARM Linux patch 1844/1 be applied to compile
OMAP-730 and OMAP-5912

Patch from Tony Lindgren

Adds OMAP-730 and OMAP-5910 support

   On IDI module cleanup, the freed card must be removed from list.  
   Use list_empty() instead of list_for_each() loop. Thanks Linus.

We don't bother aligining them on a cacheline boundary, since
that is totally excessive in some configurations (especially
P4's with 128-byte cachelines).

Instead, we make the minimum inline string size a bit longer,
and re-order a few fields that allow for better packing on
64-bit architectures, for better memory utilization.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

I moved this a little too late - we need to run populate_rootfs() before
running initcalls because some driver initcalls need to open files for
firmware.

The populate_rootfs() call is still coming after init_idle(), so it won't
knock the scheduler over.

This is a version of Binary Increase Control (BIC) TCP
developed by NCSU.   It is yet another TCP congestion control
algorithm for handling big fat pipes. For normal size congestion
windows it behaves the same as existing TCP Reno, but when window
is large it uses additive increase to ensure fairness and when
window is small it uses binary search increase.

For more details see the BIC TCP web page
 http://www.csc.ncsu.edu/faculty/rhee/export/bitcp/

The original code was for web100 (2.4); this version is pretty
much the same but targeted for 2.6 with less sysctl parameters 
and more constants.

I don't have a real high speed long haul network to test, but
when running over 1G links with delays, the performance is more stable
(ie tests are repeatable) and as fast as existing Reno.

Avoid the use of sizeof() and pointer arithmetic to get to the end
of sctp_cookie structure. Instead use the last element peer_init which
is a zero-sized array as the offset.