Skip to content

L
linux
Switch branch/tag
  1. 07 Jul, 2017 1 commit
  3. 04 Jul, 2017 2 commits
  5. 03 Jul, 2017 6 commits
    • Peter Feiner's avatar
      x86: kvm: mmu: use ept a/d in vmcs02 iff used in vmcs12 · 995f00a6
      Peter Feiner authored 
      EPT A/D was enabled in the vmcs02 EPTP regardless of the vmcs12's EPTP
value. The problem is that enabling A/D changes the behavior of L2's
x86 page table walks as seen by L1. With A/D enabled, x86 page table
walks are always treated as EPT writes.

Commit ae1e2d10 ("kvm: nVMX: support EPT accessed/dirty bits",
2017-03-30) tried to work around this problem by clearing the write
bit in the exit qualification for EPT violations triggered by page
walks.  However, that fixup introduced the opposite bug: page-table walks
that actually set x86 A/D bits were *missing* the write bit in the exit
qualification.

This patch fixes the problem by disabling EPT A/D in the shadow MMU
when EPT A/D is disabled in vmcs12's EPTP.
Signed-off-by: default avatarPeter Feiner <pfeiner@google.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      995f00a6
    • Peter Feiner's avatar
      kvm: x86: mmu: allow A/D bits to be disabled in an mmu · ac8d57e5
      Peter Feiner authored 
      Adds the plumbing to disable A/D bits in the MMU based on a new role
bit, ad_disabled. When A/D is disabled, the MMU operates as though A/D
aren't available (i.e., using access tracking faults instead).

To avoid SP -> kvm_mmu_page.role.ad_disabled lookups all over the
place, A/D disablement is now stored in the SPTE. This state is stored
in the SPTE by tweaking the use of SPTE_SPECIAL_MASK for access
tracking. Rather than just setting SPTE_SPECIAL_MASK when an
access-tracking SPTE is non-present, we now always set
SPTE_SPECIAL_MASK for access-tracking SPTEs.
Signed-off-by: default avatarPeter Feiner <pfeiner@google.com>
[Use role.ad_disabled even for direct (non-shadow) EPT page tables.  Add
 documentation and a few MMU_WARN_ONs. - Paolo]
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      ac8d57e5
    • Peter Feiner's avatar
      x86: kvm: mmu: make spte mmio mask more explicit · dcdca5fe
      Peter Feiner authored 
      Specify both a mask (i.e., bits to consider) and a value (i.e.,
pattern of bits that indicates a special PTE) for mmio SPTEs. On
Intel, this lets us pack even more information into the
(SPTE_SPECIAL_MASK | EPT_VMX_RWX_MASK) mask we use for access
tracking liberating all (SPTE_SPECIAL_MASK | (non-misconfigured-RWX))
values.
Signed-off-by: default avatarPeter Feiner <pfeiner@google.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      dcdca5fe
    • Peter Feiner's avatar
      x86: kvm: mmu: dead code thanks to access tracking · ce00053b
      Peter Feiner authored 
      The MMU always has hardware A bits or access tracking support, thus
it's unnecessary to handle the scenario where we have neither.
Signed-off-by: default avatarPeter Feiner <pfeiner@google.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      ce00053b
    • Paolo Bonzini's avatar
      Merge branch 'kvm-ppc-next' of... · 8a53e7e5
      Paolo Bonzini authored 
      Merge branch 'kvm-ppc-next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD

- Better machine check handling for HV KVM
- Ability to support guests with threads=2, 4 or 8 on POWER9
- Fix for a race that could cause delayed recognition of signals
- Fix for a bug where POWER9 guests could sleep with interrupts
  pending.
      8a53e7e5
    • Paul Mackerras's avatar
      KVM: PPC: Book3S: Fix typo in XICS-on-XIVE state saving code · 00c14757
      Paul Mackerras authored 
      This fixes a typo where the wrong loop index was used to index
the kvmppc_xive_vcpu.queues[] array in xive_pre_save_scan().
The variable i contains the vcpu number; we need to index queues[]
using j, which iterates from 0 to KVMPPC_XIVE_Q_COUNT-1.

The effect of this bug is that things that save the interrupt
controller state, such as "virsh dump", on a VM with more than
8 vCPUs, result in xive_pre_save_queue() getting called on a
bogus queue structure, usually resulting in a crash like this:

[  501.821107] Unable to handle kernel paging request for data at address 0x00000084
[  501.821212] Faulting instruction address: 0xc008000004c7c6f8
[  501.821234] Oops: Kernel access of bad area, sig: 11 [#1]
[  501.821305] SMP NR_CPUS=1024
[  501.821307] NUMA
[  501.821376] PowerNV
[  501.821470] Modules linked in: vhost_net vhost tap xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables ses enclosure scsi_transport_sas ipmi_powernv ipmi_devintf ipmi_msghandler powernv_op_panel kvm_hv nfsd auth_rpcgss oid_registry nfs_acl lockd grace sunrpc kvm tg3 ptp pps_core
[  501.822477] CPU: 3 PID: 3934 Comm: live_migration Not tainted 4.11.0-4.git8caa70f.el7.centos.ppc64le #1
[  501.822633] task: c0000003f9e3ae80 task.stack: c0000003f9ed4000
[  501.822745] NIP: c008000004c7c6f8 LR: c008000004c7c628 CTR: 0000000030058018
[  501.822877] REGS: c0000003f9ed7980 TRAP: 0300   Not tainted  (4.11.0-4.git8caa70f.el7.centos.ppc64le)
[  501.823030] MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>
[  501.823047]   CR: 28022244  XER: 00000000
[  501.823203] CFAR: c008000004c7c77c DAR: 0000000000000084 DSISR: 40000000 SOFTE: 1
[  501.823203] GPR00: c008000004c7c628 c0000003f9ed7c00 c008000004c91450 00000000000000ff
[  501.823203] GPR04: c0000003f5580000 c0000003f559bf98 9000000000009033 0000000000000000
[  501.823203] GPR08: 0000000000000084 0000000000000000 00000000000001e0 9000000000001003
[  501.823203] GPR12: c00000000008a7d0 c00000000fdc1b00 000000000a9a0000 0000000000000000
[  501.823203] GPR16: 00000000402954e8 000000000a9a0000 0000000000000004 0000000000000000
[  501.823203] GPR20: 0000000000000008 c000000002e8f180 c000000002e8f1e0 0000000000000001
[  501.823203] GPR24: 0000000000000008 c0000003f5580008 c0000003f4564018 c000000002e8f1e8
[  501.823203] GPR28: 00003ff6e58bdc28 c0000003f4564000 0000000000000000 0000000000000000
[  501.825441] NIP [c008000004c7c6f8] xive_get_attr+0x3b8/0x5b0 [kvm]
[  501.825671] LR [c008000004c7c628] xive_get_attr+0x2e8/0x5b0 [kvm]
[  501.825887] Call Trace:
[  501.825991] [c0000003f9ed7c00] [c008000004c7c628] xive_get_attr+0x2e8/0x5b0 [kvm] (unreliable)
[  501.826312] [c0000003f9ed7cd0] [c008000004c62ec4] kvm_device_ioctl_attr+0x64/0xa0 [kvm]
[  501.826581] [c0000003f9ed7d20] [c008000004c62fcc] kvm_device_ioctl+0xcc/0xf0 [kvm]
[  501.826843] [c0000003f9ed7d40] [c000000000350c70] do_vfs_ioctl+0xd0/0x8c0
[  501.827060] [c0000003f9ed7de0] [c000000000351534] SyS_ioctl+0xd4/0xf0
[  501.827282] [c0000003f9ed7e30] [c00000000000b8e0] system_call+0x38/0xfc
[  501.827496] Instruction dump:
[  501.827632] 419e0078 3b760008 e9160008 83fb000c 83db0010 80fb0008 2f280000 60000000
[  501.827901] 60000000 60420000 419a0050 7be91764 <7d284c2c> 552a0ffe 7f8af040 419e003c
[  501.828176] ---[ end trace 2d0529a5bbbbafed ]---

Cc: stable@vger.kernel.org
Fixes: 5af50993 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
Acked-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      00c14757
  7. 01 Jul, 2017 2 commits
    • Paul Mackerras's avatar
      KVM: PPC: Book3S HV: Close race with testing for signals on guest entry · 8b24e69f
      Paul Mackerras authored 
      At present, interrupts are hard-disabled fairly late in the guest
entry path, in the assembly code.  Since we check for pending signals
for the vCPU(s) task(s) earlier in the guest entry path, it is
possible for a signal to be delivered before we enter the guest but
not be noticed until after we exit the guest for some other reason.

Similarly, it is possible for the scheduler to request a reschedule
while we are in the guest entry path, and we won't notice until after
we have run the guest, potentially for a whole timeslice.

Furthermore, with a radix guest on POWER9, we can take the interrupt
with the MMU on.  In this case we end up leaving interrupts
hard-disabled after the guest exit, and they are likely to stay
hard-disabled until we exit to userspace or context-switch to
another process.  This was masking the fact that we were also not
setting the RI (recoverable interrupt) bit in the MSR, meaning
that if we had taken an interrupt, it would have crashed the host
kernel with an unrecoverable interrupt message.

To close these races, we need to check for signals and reschedule
requests after hard-disabling interrupts, and then keep interrupts
hard-disabled until we enter the guest.  If there is a signal or a
reschedule request from another CPU, it will send an IPI, which will
cause a guest exit.

This puts the interrupt disabling before we call kvmppc_start_thread()
for all the secondary threads of this core that are going to run vCPUs.
The reason for that is that once we have started the secondary threads
there is no easy way to back out without going through at least part
of the guest entry path.  However, kvmppc_start_thread() includes some
code for radix guests which needs to call smp_call_function(), which
must be called with interrupts enabled.  To solve this problem, this
patch moves that code into a separate function that is called earlier.

When the guest exit is caused by an external interrupt, a hypervisor
doorbell or a hypervisor maintenance interrupt, we now handle these
using the replay facility.  __kvmppc_vcore_entry() now returns the
trap number that caused the exit on this thread, and instead of the
assembly code jumping to the handler entry, we return to C code with
interrupts still hard-disabled and set the irq_happened flag in the
PACA, so that when we do local_irq_enable() the appropriate handler
gets called.

With all this, we now have the interrupt soft-enable flag clear while
we are in the guest.  This is useful because code in the real-mode
hypercall handlers that checks whether interrupts are enabled will
now see that they are disabled, which is correct, since interrupts
are hard-disabled in the real-mode code.
Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      8b24e69f
    • Paul Mackerras's avatar
      KVM: PPC: Book3S HV: Simplify dynamic micro-threading code · 898b25b2
      Paul Mackerras authored 
      Since commit b009031f ("KVM: PPC: Book3S HV: Take out virtual
core piggybacking code", 2016-09-15), we only have at most one
vcore per subcore.  Previously, the fact that there might be more
than one vcore per subcore meant that we had the notion of a
"master vcore", which was the vcore that controlled thread 0 of
the subcore.  We also needed a list per subcore in the core_info
struct to record which vcores belonged to each subcore.  Now that
there can only be one vcore in the subcore, we can replace the
list with a simple pointer and get rid of the notion of the
master vcore (and in fact treat every vcore as a master vcore).

We can also get rid of the subcore_vm[] field in the core_info
struct since it is never read.
Reviewed-by: default avatarDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      898b25b2
  9. 30 Jun, 2017 2 commits
  11. 29 Jun, 2017 3 commits
    • Wanpeng Li's avatar
      KVM: LAPIC: Fix lapic timer injection delay · c8533544
      Wanpeng Li authored 
      If the TSC deadline timer is programmed really close to the deadline or
even in the past, the computation in vmx_set_hv_timer will program the
absolute target tsc value to vmcs preemption timer field w/ delta == 0,
then plays a vmentry and an upcoming vmx preemption timer fire vmexit
dance, the lapic timer injection is delayed due to this duration. Actually
the lapic timer which is emulated by hrtimer can handle this correctly.

This patch fixes it by firing the lapic timer and injecting a timer interrupt
immediately during the next vmentry if the TSC deadline timer is programmed
really close to the deadline or even in the past. This saves ~300 cycles on
the tsc_deadline_timer test of apic.flat.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: default avatarWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      c8533544
    • Paolo Bonzini's avatar
      KVM: lapic: reorganize restart_apic_timer · a749e247
      Paolo Bonzini authored 
      Move the code to cancel the hv timer into the caller, just before
it starts the hrtimer.  Check availability of the hv timer in
start_hv_timer.
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      a749e247
    • Paolo Bonzini's avatar
      KVM: lapic: reorganize start_hv_timer · 35ee9e48
      Paolo Bonzini authored 
      There are many cases in which the hv timer must be canceled.  Split out
a new function to avoid duplication.
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      35ee9e48
  13. 28 Jun, 2017 5 commits
  15. 27 Jun, 2017 12 commits
  17. 22 Jun, 2017 7 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7