- 15 Jul, 2024 40 commits
-
-
Asbjørn Sloth Tønnesen authored
This policy guards fl_set_key_flags() from seeing flags not used in the context of TCA_FLOWER_KEY_FLAGS. In order For the policy check to be performed with the correct endianness, then we also needs to change the attribute type to NLA_BE32 (Thanks Davide). TCA_FLOWER_KEY_FLAGS{,_MASK} already has a be32 comment in include/uapi/linux/pkt_cls.h. Signed-off-by:Asbjørn Sloth Tønnesen <ast@fiberby.net> Tested-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org>
-
Asbjørn Sloth Tønnesen authored
Prepare fl_set_key_flags/fl_dump_key_flags() for use with TCA_FLOWER_KEY_ENC_FLAGS{,_MASK}. This patch adds an encap argument, similar to fl_set_key_ip/ fl_dump_key_ip(), and determine the flower keys based on the encap argument, and use them in the rest of the two functions. Since these functions are so far, only called with encap set false, then there is no functional change. Signed-off-by: -
Asbjørn Sloth Tønnesen authored
Define new TCA_FLOWER_KEY_FLAGS_* flags for use in struct flow_dissector_key_control, covering the same flags as currently exposed through TCA_FLOWER_KEY_ENC_FLAGS. Put the new flags under FLOW_DIS_F_*. The idea is that we can later, move the existing flags under FLOW_DIS_F_* as well. The ynl flag names have been taken from the RFC iproute2 patch. Signed-off-by:
Donald Hunter <donald.hunter@gmail.com> Link: https://patch.msgid.link/20240713021911.1631517-4-ast@fiberby.netSigned-off-by:
-
Asbjørn Sloth Tønnesen authored
Describe the flower control flags, and use them for key-flags and key-flags-mask. The flag names have been taken from iproute2. Suggested-by:
-
Asbjørn Sloth Tønnesen authored
Redefine the flower control flags as an enum, so they are included in BTF info. Make the kernel-side enum a more explicit superset of TCA_FLOWER_KEY_FLAGS_*, new flags still need to be added to both enums, but at least the bit position only has to be defined once. FLOW_DIS_ENCAPSULATION is never set for mask, so it can't be exposed to userspace in an unsupported flags mask error message, so it will be placed one bit position above the last uAPI flag. Suggested-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Suggested-by:
-
Jakub Kicinski authored
This reverts commit f7023b3d. Russell indicates that assuming 32bits are sufficient isn't necessarily safe. Link: https://lore.kernel.org/20240711154741.174745-1-thorsten.blum@toblux.com/Signed-off-by:
-
Christophe JAILLET authored
'struct llc_sap_state_trans' are not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig, as an example: Before: ====== text data bss dec hex filename 339 456 24 819 333 net/llc/llc_s_st.o After: ===== text data bss dec hex filename 683 144 0 827 33b net/llc/llc_s_st.o Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/9d17587639195ee94b74ff06a11ef97d1833ee52.1720973710.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Christophe JAILLET authored
'struct llc_conn_state_trans' are not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig, as an example: Before: ====== text data bss dec hex filename 13923 10896 32 24851 6113 net/llc/llc_c_st.o After: ===== text data bss dec hex filename 21859 3328 0 25187 6263 net/llc/llc_c_st.o Signed-off-by:
-
Christian Eggers authored
Name it 'addr' instead of 'port' or 'phy'. Signed-off-by:
Christian Eggers <ceggers@arri.de> Link: https://patch.msgid.link/20240715123050.21202-1-ceggers@arri.deSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'for-net-next-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - qca: use the power sequencer for QCA6390 - btusb: mediatek: add ISO data transmission functions - hci_bcm4377: Add BCM4388 support - btintel: Add support for BlazarU core - btintel: Add support for Whale Peak2 - btnxpuart: Add support for AW693 A1 chipset - btnxpuart: Add support for IW615 chipset - btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591 * tag 'for-net-next-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (71 commits) Bluetooth: btmtk: Mark all stub functions as inline Bluetooth: hci_qca: Fix build error Bluetooth: hci_qca: use the power sequencer for wcn7850 and wcn6855 Bluetooth: hci_qca: make pwrseq calls the default if available Bluetooth: hci_qca: unduplicate calls to hci_uart_register_device() Bluetooth: hci_qca: schedule a devm action for disabling the clock dt-bindings: bluetooth: qualcomm: describe the inputs from PMU for wcn7850 Bluetooth: btnxpuart: Fix warnings for suspend and resume functions Bluetooth: btnxpuart: Add system suspend and resume handlers Bluetooth: btnxpuart: Add support for IW615 chipset Bluetooth: btnxpuart: Add support for AW693 A1 chipset Bluetooth: btintel: Add support for Whale Peak2 Bluetooth: btintel: Add support for BlazarU core Bluetooth: btusb: mediatek: add ISO data transmission functions Bluetooth: btmtk: move btusb_recv_acl_mtk to btmtk.c Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c Bluetooth: btusb: add callback function in btusb suspend/resume Bluetooth: btmtk: rename btmediatek_data Bluetooth: btusb: mediatek: return error for failed reg access ... ==================== Link: https://patch.msgid.link/20240715142543.303944-1-luiz.dentz@gmail.comSigned-off-by:
-
Jakub Kicinski authored
First part of "net: Make timestamping selectable" from Kory Maincent. Change the driver-facing type already to lower rebasing pain. Link: https://lore.kernel.org/20240709-feature_ptp_netnext-v17-0-b5317f50df2a@bootlin.com/Signed-off-by:
-
Kory Maincent authored
In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by:
Shannon Nelson <shannon.nelson@amd.com> Acked-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.comSigned-off-by:
-
Kory Maincent authored
Prepare for future support of saving hwtstamp source in PTP xarray by introducing HWTSTAMP_SOURCE_UNSPEC to hwtstamp_source enum, setting it to 0 to match old behavior of no source defined. Signed-off-by:
-
Kory Maincent authored
Change the API to select MAC default time stamping instead of the PHY. Indeed the PHY is closer to the wire therefore theoretically it has less delay than the MAC timestamping but the reality is different. Due to lower time stamping clock frequency, latency in the MDIO bus and no PHC hardware synchronization between different PHY, the PHY PTP is often less precise than the MAC. The exception is for PHY designed specially for PTP case but these devices are not very widespread. For not breaking the compatibility default_timestamp flag has been introduced in phy_device that is set by the phy driver to know we are using the old API behavior. Reviewed-by:
Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by:
-
Nathan Chancellor authored
Several recent patches added static stubs to btmtk.h without the inline keyword, which causes instances of -Wunused-function when those stubs are not used anywhere in a file that includes the header: In file included from drivers/bluetooth/btusb.c:28: drivers/bluetooth/btmtk.h:254:13: warning: 'btmtk_fw_get_filename' defined but not used [-Wunused-function] 254 | static void btmtk_fw_get_filename(char *buf, size_t size, u32 dev_id, | ^~~~~~~~~~~~~~~~~~~~~ drivers/bluetooth/btmtk.h:249:12: warning: 'btmtk_process_coredump' defined but not used [-Wunused-function] 249 | static int btmtk_process_coredump(struct hci_dev *hdev, struct sk_buff *skb) | ^~~~~~~~~~~~~~~~~~~~~~ drivers/bluetooth/btmtk.h:243:12: warning: 'btmtk_register_coredump' defined but not used [-Wunused-function] 243 | static int btmtk_register_coredump(struct hci_dev *hdev, const char *name, | ^~~~~~~~~~~~~~~~~~~~~~~ drivers/bluetooth/btmtk.h:233:12: warning: 'btmtk_setup_firmware' defined but not used [-Wunused-function] 233 | static int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname, | ^~~~~~~~~~~~~~~~~~~~ drivers/bluetooth/btmtk.h:227:12: warning: 'btmtk_setup_firmware_79xx' defined but not used [-Wunused-function] 227 | static int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname, | ^~~~~~~~~~~~~~~~~~~~~~~~~ Add inline to all the stubs in btmtk.h (even ones that do not currently have any warnings associated with them) to ensure there are never unused function warnings from these stubs, as is customary for the kernel. Signed-off-by:Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Luiz Augusto von Dentz authored
This fixes the following build error introduced by b80f4e3b ("Bluetooth: hci_qca: schedule a devm action for disabling the clock"): drivers/bluetooth/hci_qca.c: In function ‘qca_serdev_remove’: drivers/bluetooth/hci_qca.c:2501:2: error: label at end of compound statement 2501 | default: | ^~~~~~~ Fixes: b80f4e3b ("Bluetooth: hci_qca: schedule a devm action for disabling the clock") Signed-off-by:
-
Bartosz Golaszewski authored
In preparation for using the power sequencing subsystem on sm8650 boards and X13s laptop let's make pwrseq the default for wcn7850 and wcn6855. Both these models require an enable GPIO so we can safely assume that if the property is not there, then we should try to get the power sequencer. Due to how the pwrseq lookup works - checking the provider at run-time - we cannot really do it the other way around as we'd get stuck forever on -EPROBE_DEFER. If the relevant OF node does have the 'enable-gpios' property, we fallback to the existing code for backward compatibility with older DTs. Signed-off-by:
Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by:
-
Bartosz Golaszewski authored
If the device has a power sequencing handle, use it first. Otherwise fall back to whatever code already exists. Signed-off-by:
-
Bartosz Golaszewski authored
Now that all three branches of the switch end up doing the same thing, we can move the call to hci_uart_register_device() past it and unify the error message. Signed-off-by:
-
Bartosz Golaszewski authored
In preparation for unduplicating the hci_uart registration code, schedule a devres action for disabling the SUSCLK rather than doing it manually. We cannot really use devm_clk_get_enabled() as we also set the rate before enabling the clock. While this should in theory work, I don't want to risk breaking existing users. One solution for the future is to add devm_clk_get_enabled_with_rate() to the clock framework. Signed-off-by:
-
Bartosz Golaszewski authored
Drop the inputs from the host and instead expect the Bluetooth node to consume the outputs of the internal PMU. This model is closer to reality than how we represent it now. Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Signed-off-by:
-
Neeraj Sanjay Kale authored
This fixes the warnings 'nxp_serdev_resume' and 'nxp_serdev_suspend' defined but not used. Signed-off-by:
Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407100518.06Xxq5PK-lkp@intel.com/Signed-off-by:
-
Neeraj Sanjay Kale authored
This adds handling for system suspend and resume. While the host enters suspend state, the driver will drive the chip into low power state. Similarly when system is resuming, the driver will wake up the chip. Signed-off-by:
-
Neeraj Sanjay Kale authored
This adds support for IW615 chipset with it's bootloader signature and firmware file. Signed-off-by:
-
Kory Maincent authored
Timestamping software or hardware flags are often used as a group, therefore adding these masks will ease future use. I did not use SOF_TIMESTAMPING_SYS_HARDWARE flag as it is deprecated and not used at all. Reviewed-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
-
Neeraj Sanjay Kale authored
This adds support for AW693 A1 chipset with it's bootloader signature and firmware file. No firmware name change needed for AW693 A0 chipset. Signed-off-by:
-
Kiran K authored
from /sys/kernel/debug/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0039 Rev= 0.00 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by:
Kiran K <kiran.k@intel.com> Signed-off-by:
-
Kiran K authored
Add support for BlazarU core (CNVi). Signed-off-by:
-
Chris Lu authored
This patch implements functions for ISO data send and receive in btusb driver for MediaTek's controller. MediaTek defines a specific interrupt endpoint for ISO data transmissin because the characteristics of interrupt endpoint are similar to the application of ISO data which can support guaranteed transmissin bandwidth, enough maximum data length and error checking mechanism. Driver sets up ISO interface and endpoints in btusb_mtk_setup and clears the setup in btusb_mtk_shutdown. These flow can't move to btmtk.c due to btusb_driver is only defined in btusb.c when claiming/relaesing interface. ISO packet anchor stops when driver suspending and resubmit interrupt urb for ISO data when driver resuming. Signed-off-by:
Chris Lu <chris.lu@mediatek.com> Signed-off-by:
-
Chris Lu authored
Move btusb_recv_acl_mtk from btusb.c to btmtk.c which holds vendor specific stuff and would make btusb.c clean. Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Chris Lu authored
Move btusb_mtk_[setup, shutdown] and related function from btusb.c to btmtk.c which holds vendor specific stuff and would make btusb.c clean. Signed-off-by:
-
Chris Lu authored
Move btusb_mtk_hci_wmt_sync from btusb.c to btmtk.c which holds vendor specific stuff and would make btusb.c clean. Add usb.h header to btmtksdio.c/btmtkuart.c for usb related element defined in btmtk.h Signed-off-by:
-
Chris Lu authored
Add suspend/resum callback function in btusb_data which are reserved for vendor specific usage during suspend/resume. hdev->suspend will be added before stop traffic in btusb_suspend and hdev-> resume will be added after resubmit urb in btusb_resume. Signed-off-by:
-
Chris Lu authored
Rename btmediatek_data to have a consistent prefix throughout the driver. Signed-off-by:
-
Chris Lu authored
Update the code to immediately return an error code if accessing a related register fails. This ensures that our desired logic for subsequent register operations is maintained and allows us to promptly catch any unexpected errors. Signed-off-by:
-
Chris Lu authored
Remove the unnecessary goto tag whether there is an error or not, we have to free the buffer at the end of the function. Signed-off-by:
-
Luiz Augusto von Dentz authored
This removes hci_request.{c,h} since it shall no longer be used. Signed-off-by: -
Luiz Augusto von Dentz authored
This removes the dependencies of hci_req_init and hci_request_cancel_all from hci_sync.c. Signed-off-by: -
Luiz Augusto von Dentz authored
This moves handling of interleave_scan work to hci_sync.c since hci_request.c is deprecated. Signed-off-by: -
Luiz Augusto von Dentz authored
This replaces the instance of hci_prepare_cmd with hci_cmd_sync_alloc since the former is part of hci_request.c which is considered deprecated. Signed-off-by:
-
