The HTML output works a little nicer that way.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The probe error path for this driver, for all intents and purposes,
is the talitos_remove() function due to the common "goto err_out".

Without this patch applied, talitos_remove() will panic under these
two conditions:

1. If the RNG device hasn't been registered via
   talitos_register_rng() prior to entry into talitos_remove(),
   then the attempt to unregister the RNG "device" will cause a panic.

2. If the priv->chan array has not been allocated prior to entry
   into talitos_remove(), then the per-channel FIFO cleanup will panic
   because of the dereference of that NULL "array".

Both of the above scenarios occur if talitos_probe_irq() fails.

This patch resolves issue #1 by introducing a boolean to mask the
hwrng_unregister() call in talitos_unregister_rng() if RNG device
registration was unsuccessful.

It resolves issue #2 by checking that priv->chan is not NULL in the
per-channel FIFO cleanup for loop.
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Select CAAM for i.MX6 devices.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Register only algorithms supported by CAAM hardware, using the CHA
version and instantiation registers to identify hardware capabilities.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Allow CAAM to be selected in the kernel for Freescale i.MX devices if
ARCH_MXC is enabled.
Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com>
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add CAAM device node to the i.MX6SX device tree.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add CAAM device node to the i.MX6 device tree.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add CAAM clock support to the i.MX6 clocking infrastructure.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The clocks and clock-names properties describe input clocks that may be
required for enablement of CAAM.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Avoid moving the head of the scatterlist entry by using temporary
pointers to walk the scatterlist.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This change fixes:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 456 at lib/dma-debug.c:1103 check_unmap+0x438/0x958()
caam_jr 2101000.jr0: DMA-API: device driver frees DMA memory with different size [device address=0x000000003a241080] [map ]
Modules linked in: tcrypt(+)
CPU: 0 PID: 456 Comm: insmod Not tainted 4.1.0-248766-gf823586-dirty #82
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[<80015e0c>] (unwind_backtrace) from [<80012764>] (show_stack+0x10/0x14)
[<80012764>] (show_stack) from [<806df8e8>] (dump_stack+0x84/0xc4)
[<806df8e8>] (dump_stack) from [<800266fc>] (warn_slowpath_common+0x84/0xb4)
[<800266fc>] (warn_slowpath_common) from [<8002675c>] (warn_slowpath_fmt+0x30/0x40)
[<8002675c>] (warn_slowpath_fmt) from [<802c7db8>] (check_unmap+0x438/0x958)
[<802c7db8>] (check_unmap) from [<802c835c>] (debug_dma_unmap_page+0x84/0x8c)
[<802c835c>] (debug_dma_unmap_page) from [<804d3b94>] (ahash_update_ctx+0xb08/0xec4)
[<804d3b94>] (ahash_update_ctx) from [<7f002984>] (test_ahash_pnum.isra.9.constprop.19+0x2b8/0x514 [tcrypt])
[<7f002984>] (test_ahash_pnum.isra.9.constprop.19 [tcrypt]) from [<7f005998>] (do_test+0x2db8/0x37cc [tcrypt])
[<7f005998>] (do_test [tcrypt]) from [<7f00b050>] (tcrypt_mod_init+0x50/0x9c [tcrypt])
[<7f00b050>] (tcrypt_mod_init [tcrypt]) from [<80009730>] (do_one_initcall+0x8c/0x1d4)
[<80009730>] (do_one_initcall) from [<806dda4c>] (do_init_module+0x5c/0x1a8)
[<806dda4c>] (do_init_module) from [<80085308>] (load_module+0x17e0/0x1da0)
[<80085308>] (load_module) from [<80085998>] (SyS_init_module+0xd0/0x120)
[<80085998>] (SyS_init_module) from [<8000f4c0>] (ret_fast_syscall+0x0/0x3c)
---[ end trace 60807cfb6521c79f ]---
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since fields must be ORed in to operate correctly using any order of
operations, changed allocations of the combination of extended
descriptor structs + hardware scatterlists to use kzalloc() instead
of kmalloc(), so as to ensure that residue data would not be ORed in
with the correct data.
Signed-off-by: Steve Cornelius <steve.cornelius@freescale.com>
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Modify the Scatter-Gather entry definitions for the Freescale
CAAM driver to include support for both 64- and 32-bit DMA pointers.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

ARM-based systems may disable clocking to the CAAM device on the
Freescale i.MX platform for power management purposes.  This patch
enables the required clocks when the CAAM module is initialized and
disables the required clocks when the CAAM module is shut down.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add set/clear 32-bit primitives for compatibility with ARM devices since
the primitives were previously only defined for the Power architecture.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Freescale i.MX6 ARM platforms do not support hardware cache coherency.
This patch adds cache coherency support to the CAAM driver.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: Horia Geantă <horia.geanta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Merge the crypto tree to pull in the authencesn fix.

The ESP code has been updated to generate a completely linear
AD SG list.  This unfortunately broke authencesn which expects
the AD to be divided into at least three parts.

This patch fixes it to cope with the new format.  Later we will
fix it properly to accept arbitrary input and not rely on the
input being linear as part of the AEAD conversion.

Fixes: 7021b2e1 ("esp4: Switch to new AEAD interface")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

CRYPTO_AUTHENC needs to depend on CRYPTO_NULL as authenc uses
null for copying.
Reported-by: Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Now that all implementations of authenc have been converted we can
reenable the tests.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch converts talitos to the new AEAD interface.  IV generation
has been removed since it's equivalent to a software implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch converts qat to the new AEAD interface.  IV generation
has been removed since it's equivalent to a software implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Tadeusz Struk <tadeusz.struk@intel.com>

This patch converts picoxcell to the new AEAD interface.  IV
generation has been removed since it's equivalent to a software
implementation.

As picoxcell cannot handle SG lists longer than 16 elements,
this patch has made the software fallback mandatory.  If an SG
list comes in that exceeds the limit, we will simply use the
fallback.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch converts ixp4xx to the new AEAD interface.  IV generation
has been removed since it's a purely software implementation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch converts the authenc implementations in caam to the
new AEAD interface.  The biggest change is that seqiv no longer
generates a random IV.  Instead the IPsec sequence number is used
as the IV.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch converts authenc to the new AEAD interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch disables the authenc tests while the conversion to the
new IV calling convention takes place.  It also replaces the authenc
test vectors with ones that will work with the new IV convention.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Merge the crypto tree to pull in the qat registration bug fix.

Compiling the talitos driver with my GCC 4.3.1 e500v2 cross-compiler
resulted in a failed build due to the anonymous union/structures
introduced in this commit:

  crypto: talitos - enhanced talitos_desc struct for SEC1

The build error was:

  drivers/crypto/talitos.h:56: error: unknown field 'len' specified in initializer
  drivers/crypto/talitos.h:56: warning: missing braces around initializer
  drivers/crypto/talitos.h:56: warning: (near initialization for 'zero_entry.<anonymous>')
  drivers/crypto/talitos.h:57: error: unknown field 'j_extent' specified in initializer
  drivers/crypto/talitos.h:58: error: unknown field 'eptr' specified in initializer
  drivers/crypto/talitos.h:58: warning: excess elements in struct initializer
  drivers/crypto/talitos.h:58: warning: (near initialization for 'zero_entry')
  make[2]: *** [drivers/crypto/talitos.o] Error 1
  make[1]: *** [drivers/crypto] Error 2
  make: *** [drivers] Error 2

This patch eliminates the errors by relying on the C standard's
implicit assignment of zero to static variables.
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The AEAD API changes are now reflected in the crypto API doc book.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Trival change, fix spelling mistake 'aquire' -> 'acquire' in
dev_err message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The encap shared descriptor was changed to use the new IV convention.
In the process some commands were shifted, making the output length
zero, caam effectively writing garbage in dst.

While here, update the decap descriptor to execute the "write" commands
before the "read"s (as it previously was).
This makes sure the input fifo is drained before becoming full.

Fixes: 46218750 ("crypto: caam - Use new IV convention")
Signed-off-by: Horia Geant? <horia.geanta@freescale.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Change my IBM email to my personal IEEE email.

I'm leaving IBM, so my email there won't work anymore.  This changes
the owner to my personal email, so I can still get cc'ed on patches,
until someone at IBM sends a patch to take it over.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

One of the debug messages in the NX 842 PowerNV driver is missing
the required be32_to_cpu() wrapper when accessing the __be32 field
csb->count.  Add the wrapper so the message will show the correct count.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Return success instead of error if compression succeeds but the output is
larger than the input.

It's unlikely that the caller will use the compressed data since it's
larger than the original uncompressed data, but there was no error and
returning an error code is incorrect.  Further, for testing small input
buffers, the output is likely to be larger than the input and success
needs to be returned to verify the test.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

There's no need to iterate through the list for instances in the
accel_table since the number of devices is already known in this file.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since the API for jent_panic() does not include format string parameters,
adjust the call to panic() to use a literal string to avoid any future
callers from leaking format strings into the panic message.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Ahsan Atta <ahsan.atta@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The subject macro mistakenly compares the passed-in ring size in bytes
with ADF_RING_SIZE_4K which is 0x6 (an internal representation of 4KB)
rather than comparing with the intended value of 4096.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>